415 resultados para Tinturaria têxtil
Resumo:
This study aims to assess the potential for industrial reuse of textile wastewater, after passing through a physical and chemical pretreatment, into denim washing wet processing operations in an industrial textile laundry, with no need for complementary treatments and dilutions. The methodology and evaluation of the proposed tests were based on the production techniques used in the company and upgraded for the experiments tested. The characterization of the treated effluent for 16 selected parameters and the development of a monitoring able to tailor the treated effluent for final disposal in accordance with current legislation was essential for the initiation of testing for reuse. The parameters color, turbidity, SS and pH used were satisfactory as control variables and presents simple determination methods. The denim quality variables considered were: color, odor, appearance and soft handle. The tests were started on a pilot scale following complexity factors attributed to the processes, in denim fabric and jeans, which demonstrated the possibility of reuse, because there was no interference in the processes and at quality of the tested product. Industrial scale tests were initiated by a step control that confirmed the methodology efficiency applied to identify the possibility of reuse by tests that precede each recipe to be processed. 556 replicates were performed in production scale for 47 different recipes of denim washing. The percentage of water reuse was 100% for all processes and repetitions performed after the initial adjustment testing phase. All the jeans were framed with the highest quality for internal control and marketed, being accepted by contractors. The full-scale use of treated wastewater, supported by monitoring and evaluation and control methodology suggested in this study, proved to be valid in textile production, not given any negative impact to the quality the produced jeans under the presented conditions. It is believed that this methodology can be extrapolated to other laundries to determine the possibility of reuse in denim washing wet processing with the necessary modifications to each company.
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Análise voltamétrica do corante têxtil do tipo antraquinona empregando eletrodos de carbono impresso
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Desenvolvimento inicial e estado nutricional do maracujazeiro em resposta à aplicação de lodo têxtil
Resumo:
O processo de tratamento de efluentes líquidos da indústria têxtil gera, como resíduo, um lodo de características orgânicas com concentração significativa de sódio e potássio. Objetivou-se quantificar os efeitos da aplicação do lodo ao solo, sobre o desenvolvimento inicial do maracujazeiro, e avaliou-se o crescimento e o estado nutricional das plantas. O delineamento experimental foi em blocos ao acaso, com quatro repetições de cinco tratamentos, que consistiram na aplicação de lodo têxtil, nas doses de 10, 15, 20 e 30 g vaso-1 (base seca), correspondentes a 10, 15, 20 e 30 t ha-1, respectivamente, além da testemunha sem aplicação do resíduo. As mudas receberam adubação básica com N, P, K, Zn e B, nas doses de 300, 450, 150, 5, e 0,5 mg dm-3, respectivamente. A unidade experimental foi constituída por vasos com 2 dm³ de amostra de um Latossolo Vermelho distrófico (V = 29%). Após 100 dias da semeadura, o lodo têxtil corrigiu a acidez do solo. Entretanto, em doses superiores a 10 t ha-1, promoveu a morte das plantas. O lodo têxtil aumentou os teores de N, K, S, B, Mn e Zn, diminuiu os de Ca e Mg e não alterou os de Cu e Fe da parte aérea das mudas.
Resumo:
The experiment was conducted to investigate the viability of the production of the edible fungus Pleurotus sajor-caju (Fr.) Singer in substrates in which main source of carbon was the cotton textille mill waste. Two substrates compositions were tested: C1 (cotton textille mill waste, wheat bran, plaster and limestone) and C2 (cotton textille mill waste, wheat bran, bean straw, plaster and limestone). A DIC experimental design was used, with nine repetitions for treatment and the production data and biological efficiency were analyzed being used the procedure ANOVAG of the statistical package SAEG. The cotton textille mill waste improvement, as the main ingredient of the substrate, was shown efficient for the production of the mushroom P. sajor-caju, presenting satisfactory values of productivity (0,56 and 0,5 kg/kg substratum) and biological efficiency (55,76 and 55,39%), respectively for C1 and C2. These results showed us that cotton textille mill waste, could be recommended as less onerous alternative of commercial substrate for the species Pleurotus sajor-caju.
Resumo:
A continuous flow reactor, inoculated with Aspergillus niger AN400, with total volume of 5 L was operated at 29 degrees C, with eight hours of retention hydraulic time and 150 L.h(-1) of air flow rate in order to remove 25 mg.L(-1) of Congo Red dye from a synthetic wastewater. The feeding of the reactor, inoculated with Aspergillus niger AN400, was done in two phases: Phase I, with 0,5 g/L of saccharose and Phase II, with no saccharose. In Phase I, it was possible to verify efficiencies of organic matter and color (mg Pt.L(-1)) removal of 80 +/- 16% and 82 +/- 10%, respectively. In Phase II, the efficiency of organic matter removal was 75 +/- 13% and color removal was 89 +/- 7%. The higher removals of nutrients were achieved by the reactor in Phase I with 25% to ammonia, 90% to nitrite, 93% to nitrate and 21% to phosphorus. Apparently, the presence of saccharose improved the removal of the nutrients.
Resumo:
Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)
Resumo:
Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)
Resumo:
Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)
Resumo:
Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)
Resumo:
Retrata a trajetória histórica da Companhia Têxtil de Castanhal (CTC), uma indústria localizada na Amazônia, voltada à fiação e tecelagem de fibras de juta, demonstrando como ela se posicionou frente à cadeia produtiva da juta no Brasil, conseguindo manter-se no setor têxtil por tanto tempo, mesmo diante das adversidades, tornando-se a líder nacional na fabricação de produtos de juta. O período retratado foi de 1966 a 2006, abordando alguns aspectos sobre a origem, questões históricas e socioeconômicas desse tipo de fibra natural, com o propósito de alicerçar um melhor entendimento sobre as razões do fundador para o surgimento da Companhia, a gestão da familia Pacheco Borges, estratégias adotadas, entraves, inovações, expansão e movimento no mercado.
Resumo:
Pós-graduação em Geografia - IGCE
Resumo:
Traçar a identidade do microempreendedor da área têxtil da cidade paulista de Franca, analisando as suas especificidades, seu caráter inovador e os reflexos de suas atividades no espaço coletivo é o desafio a que se propôs o pesquisador Mateus Beordo. Ele mostra nesta obra que o ramo de confecções emergiu da crise da indústria calçadista, tradicional na cidade e atrelada à história de seu desenvolvimento econômico (Franca firmou-se como importante polo de calçados a partir dos anos 1930). Desde a década de 1990, no entanto, com o processo de globalização e a abertura do mercado brasileiro, a indústria calçadista viu-se em dificuldades diante da concorrência internacional. Com o conhecimento obtido na produção de calçados, porém, mulheres passaram a montar microconfecções em suas residências, já que a atividade exigia baixos investimentos iniciais - em geral, bastava adquirir uma máquina de costura, tecidos e outros artefatos para a montagem e modelagem de lingeries. E o que era, a princípio, uma simples alternativa de renda familiar, foi ganhando vulto: hoje parte da produção das microempresárias é exportada para Europa, Estados Unidos e Japão. De acordo com o autor, o estudo permitiu não somente a identificação do caráter empreendedor das microempresárias da área têxtil de Franca, como uma reflexão sobre suas condições de vida e trabalho, por meio de seus problemas concretos, potencialidades e estratégias
Resumo:
TThis work deals with present how to increase the accuracy of productivity indicators, aiming to increase the information accuracy of performance indicators and propose improvements to the process in question, more specifically to improve the visualization of information from these indicators for all hierarchical levels of the company, and then make possible use them to assist in the processes of decision making and planning of the production process. We start with an analysis of the current process to be studied seeking sources of information losses during the production process. Afterwards, a specific analysis of the points considered critical, so alternatives are raised for improvements to these points. This project has some specific tools and methodologies that guide the development of work which are required of any project carried out in the company
Resumo:
Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)