Effect of microstructure on the fatigue properties of Ti-6Al-4V titanium alloys

Through an analysis on microstructure and high cycle fatigue (HCF) properties of Ti-6Al-4V alloys which were selected from literature, the effects of microstructure types and microstructure parameters on HCF properties were investigated systematically. The results show that the HCF properties are strongly determined by microstructure types for Ti-6Al-4V. Generally the HCF strengths of different microstructures decrease in the order of bimodal, lamellar and equiaxed microstructure. Additionally, microstructure parameters such as the primary a (a) content and the a grain size in bimodal microstructures, the a lamellar width in lamellar microstructure and the a grain size in equiaxed microstructures, can influence the HCF properties. © 2012 Elsevier Ltd.

Effect of shotpeening on sliding wear and tensile behavior of titanium implant alloys

Titanium has good biocompatibility and so its alloys are used as implant materials, but they suffer from having poor wear resistance. This research aims to improve the wear resistance and the tensile strength of titanium alloys potentially for implant applications. Titanium alloys Ti–6Al–4V and Ti–6Al–7Nb were subjected to shotpeening process to study the wear and tensile behavior. An improvement in the wear resistance has been achieved due to surface hardening of these alloys by the process of shotpeening. Surface microhardness of shotpeened Ti–6Al–4V and Ti–6Al–7Nb alloys has increased by 113 and 58 HV(0.5), respectively. After shotpeening, ultimate tensile strength of Ti–6Al–4V increased from 1000 MPa to 1150 MPa, higher than improvement obtained for heat treated titanium specimens. The results confirm that shotpeening pre-treatment improved tensile and sliding wear behavior of Ti–6Al–4V and Ti–6Al–7Nb alloys. In addition, shotpeening increased surface roughness.

3D FEM simulation of helical milling hole process for titanium alloy Ti-6Al-4V

As an emerging hole-machining methodology, helical milling process has become increasingly popular in aeromaterials manufacturing research, especially in areas of aircraft structural parts, dies, and molds manufacturing. Helical milling process is highly demanding due to its complex tool geometry and the progressive material failure on the workpiece. This paper outlines the development of a 3D finite element model for helical milling hole of titanium alloy Ti-6Al-4V using commercial FE code ABAQUS/Explicit. The proposed model simulates the helical milling hole process by taking into account the damage initiation and evolution in the workpiece material. A contact model at the interface between end-mill bit and workpiece has been established and the process parameters specified. Furthermore, a simulation procedure is proposed to simulate different cutting processes with the same failure parameters. With this finite element model, a series of FEAs for machined titanium alloy have been carried out and results compared with laboratory experimental data. The effects of machining parameters on helical milling have been elucidated, and the capability and advantage of FE simulation on helical milling process have been well presented.

Rhythmic Masticatory Muscle Activity during Sleep: Etiology and Clinical Perspectives

L’activité rythmique des muscles masticateurs (ARMM) pendant le sommeil se retrouve chez environ 60% de la population générale adulte. L'étiologie de ce mouvement n'est pas encore complètement élucidée. Il est cependant démontré que l’augmentation de la fréquence des ARMM peut avoir des conséquences négatives sur le système masticatoire. Dans ce cas, l'ARMM est considérée en tant que manifestation d'un trouble moteur du sommeil connue sous le nom de bruxisme. Selon la Classification Internationale des Troubles du Sommeil, le bruxisme est décrit comme le serrement et grincement des dents pendant le sommeil. La survenue des épisodes d’ARMM est associée à une augmentation du tonus du système nerveux sympathique, du rythme cardiaque, de la pression artérielle et elle est souvent en association avec une amplitude respiratoire accrue. Tous ces événements peuvent être décrits dans le contexte d’un micro-éveil du sommeil. Cette thèse comprend quatre articles de recherche visant à étudier i) l'étiologie de l’ARMM pendant le sommeil en relation aux micro-éveils, et à évaluer ii) les aspects cliniques du bruxisme du sommeil, du point de vue diagnostique et thérapeutique. Pour approfondir l'étiologie de l’ARMM et son association avec la fluctuation des micro-éveils, nous avons analysé le patron cyclique alternant (ou cyclic alternating pattern (CAP) en anglais), qui est une méthode d’analyse qui permet d’évaluer l'instabilité du sommeil et de décrire la puissance des micro-éveils. Le CAP a été étudié chez des sujets bruxeurs et des sujets contrôles qui ont participé à deux protocoles expérimentaux, dans lesquels la structure et la stabilité du sommeil ont été modifiées par l'administration d'un médicament (la clonidine), ou avec l'application de stimulations sensorielles (de type vibratoire/auditif) pendant le sommeil. Dans ces deux conditions expérimentales caractérisées par une instabilité accrue du sommeil, nous étions en mesure de démontrer que les micro-éveils ne sont pas la cause ou le déclencheur de l’ARMM, mais ils représentent plutôt la «fenêtre permissive» qui facilite l'apparition de ces mouvements rythmiques au cours du sommeil. Pour évaluer la pertinence clinique du bruxisme, la prévalence et les facteurs de risque, nous avons effectué une étude épidémiologique dans une population pédiatrique (7-17 ans) qui était vue en consultation en orthodontie. Nous avons constaté que le bruxisme est un trouble du sommeil très fréquent chez les enfants (avec une prévalence de 15%), et il est un facteur de risque pour l'usure des dents (risque relatif rapproché, RRR 8,8), la fatigue des muscles masticateurs (RRR 10,5), les maux de tête fréquents (RRR 4,3), la respiration bruyante pendant le sommeil (RRR 3,1), et divers symptômes liés au sommeil, tels que la somnolence diurne (RRR 7,4). Ces résultats nous ont amenés à développer une étude expérimentale pour évaluer l'efficacité d'un appareil d'avancement mandibulaire (AAM) chez un groupe d'adolescents qui présentaient à la fois du bruxisme, du ronflement et des maux de tête fréquents. L'hypothèse est que dans la pathogenèse de ces comorbidités, il y a un mécanisme commun, probablement lié à la respiration pendant le sommeil, et que l'utilisation d'un AAM peut donc agir sur plusieurs aspects liés. À court terme, le traitement avec un AAM semble diminuer l'ARMM (jusqu'à 60% de diminution), et améliorer le ronflement et les maux de tête chez les adolescents. Cependant, le mécanisme d'action exact des AAM demeure incertain; leur efficacité peut être liée à l'amélioration de la respiration pendant le sommeil, mais aussi à l'influence que ces appareils pourraient avoir sur le système masticatoire. Les interactions entre le bruxisme du sommeil, la respiration et les maux de tête, ainsi que l'efficacité et la sécurité à long terme des AAM chez les adolescents, nécessitent des études plus approfondies.

Characterization of Hydrothermally Annealed Low Temperature Bioactive Thin Film Coatings of Hydroxyapatite on TiAl6V4 Implant material

This thesis summarizes the results on the growth and characterisation of thin films of HA grown on TiAl6V4 (Ti) implant material at a lower substrate temperature by a combination of Pulsed laser deposition and a hydrothermal treatment to get sufficiently strong crystalline films suitable for orthopaedic applications. The comparison of the properties of the coated substrate has been made with other surface modification techniques like anodization and chemical etching. The in-vitro study has been conducted on the surface modified implants to assess its cell viability. A molecular level study has been conducted to analyze the adhesion mechanism of protein adhesion molecules on to HA coated implants.

La biblioteca en la educación de adultos.

La biblioteca es un instrumento y debe subordinarse al cumplimiento de unos fines que la actividad cultural persigue. En este caso se trata de la educación de adultos. Desde sus orígenes, han cambiado los intereses y los usuarios. Actualmente se ha desarrollado un nuevo concepto que trata de incorporar a un grupo de edad, excluido hasta que se implantó el concepto de educación permanente a lo largo de la vida y era lógico que llegase a este grupo. Para este fin, la biblioteca es el lugar idóneo para que el alumno pueda completar su instrucción, ayudado por personas como son los animadores culturales que contribuirán a ampliar su formación cultural. Además, de animarles en su cometido. También se deben adecuar los fondos de la biblioteca. Deben ser sencillos en su compresión, adecuados a las posibilidades y características de sus lectores. Berelson, Bernard: Who reads what books and why?. En Rosemberg, B. y White, D,M.: Mass cultures, the popular art un American. The tree Pres of Glencoe, 1957 Dumadier, Joffre: Sciolologie de la lecture et sociologie de lïeducation en le courrier de la recherche pédagoghique. Paris, octubre de 1960; Harrison, J. F.C.: Learnig and living 1790-1960. A study in the history of the englis adult education movement, Routledge and Kegan Paul. Londres, 2 ed., 1963. Janus, la revolution do loisir, núm. 7, Paris , junio-agosto, 1965; López de la Viesca, Evaristo: El foro literario. Educación de adultos a través de la lectura. Ediciones Marsiega. Madrid, 1972;-Maillo, Adolfo: Educación de adultos, educación permanente. Editorial Escuela Española. Madrid, 1969; Piccones Stella, Simonetta y Rossi, Annabella: La fatica di leggere. Editori Reuniti. Roma, 1965.

Bone Formation Following Implantation of Titanium Sponge Rods into Humeral Osteotomies in Dogs: A Histological and Histometrical Study

Background: Titanium (Ti) is widely proven to enhance bone contact and growth on its surface. It is expected that bone defects could benefit from Ti to promote healing and to increase strength of the implanted area. Purpose: The present study aimed at comparing the potential of porous Ti sponge rods with synthetic hydroxyapatite (HA) for the healing of bone defects in a canine model. Material and Methods: Six mongrel dogs were submitted to three trephined osteotomies of 6.0 x 4.0 mm in one humerus and after 2 months another three osteotomies were performed in the contralateral humerus. A total of 36 defects were randomly filled either with Ti foam, particulate HA, or coagulum (control). The six animals were killed 4 months after the first surgery for histological and histometrical analysis. Results: The Ti-foam surface was frequently found in intimate contact with new bone especially at the defect walls. Control sites showed higher amounts of newly formed bone at 2 months - Ti (p = 0.000) and HA (p = 0.009) - and 4 months when compared with Ti (p = 0.001). Differently from HA, the Ti foam was densely distributed across the defect area which rendered less space for bone growth in the latter`s sites. The use of Ti foams or HA resulted in similar amounts of bone formation in both time intervals. Nevertheless, the presence of a Ti-foam rod preserved defect`s marginal bone height as compared with control groups. Also, the Ti-foam group showed a more mature bone pattern at 4 months than HA sites. Conclusion: The Ti foam exhibited good biocompatibility, and its application resulted in improved maintenance of bone height compared with control sites. The Ti foam in a rod design exhibited bone ingrowth properties suitable for further exploration in other experimental situations.

Three-Dimensional Characterization of Pores in Ti-6Al-4V Alloy

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Monitoring in precision metal drilling process using multi-sensors and neural network

This paper presents a new method to estimate hole diameters and surface roughness in precision drilling processes, using coupons taken from a sandwich plate composed of a titanium alloy plate (Ti6Al4V) glued onto an aluminum alloy plate (AA 2024T3). The proposed method uses signals acquired during the cutting process by a multisensor system installed on the machine tool. These signals are mathematically treated and then used as input for an artificial neural network. After training, the neural network system is qualified to estimate the surface roughness and hole diameter based on the signals and cutting process parameters. To evaluate the system, the estimated data were compared with experimental measurements and the errors were calculated. The results proved the efficiency of the proposed method, which yielded very low or even negligible errors of the tolerances used in most industrial drilling processes. This pioneering method opens up a new field of research, showing a promising potential for development and application as an alternative monitoring method for drilling processes. © 2012 Springer-Verlag London Limited.

Improvements of plasma immersion ion implantation (PIII) and deposition (PIII&D) processing for materials surface modification

Plasma immersion ion implantation (PIII) process is a three dimensional surface modification method that is quite mature and well known to the surface engineering community nowadays, especially to those working in the field of plasma-materials interaction, aiming at both industrial and academic applications. More recently, deposition methods have been added to PIII, the PIII&D, opening possibilities of broader range of applications of these techniques. So, PIII&D is becoming a routine method of surface modification, with the advantage of pushing up the retained dose levels limited by the sputtering due to ion implantation. Therefore, well adherent, thick, three-dimensional films without stress are possible to be achieved, at relatively low cost, using PIII&D. In this paper, we will discuss about a few PIII and PIII&D experiments that have been performed recently to achieve surface improvements in different materials: 1 - high temperature nitrogen PIII in Ti6Al4V alloy in which a deep nitrogen rich treated layer resulted in surface improvements as increase of hardness, corrosion resistance and resistance to wear of the Ti alloy; 2 - nanostructures in ZnO films, obtained by PIII&D of vaporized & ionized Zn source; 3 - combined implantation and deposition of calcium for biomaterial activity of Ti alloy (PIII&D), allowing the growth of hydroxyapatite in a body solution; 4 - magnetron sputtering deposition of Cr that was enhanced by the glow discharge Ar plasma to allow implantation and deposition of Cr on SAE 1070 steel (PIII&D) resulting in surfaces with high resistance to corrosion; and 5 - implantation of nitrogen by ordinary PIII into this Cr film, which improved resistance to corrosion, while keeping the tribological properties as good as for the SAE 1070 steel surface. © 2012 Elsevier B.V.

Modificação de superfície empregando-se laser e recobrimento de implantes dentários de titânio com apatitas

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Caracterização da superfície da liga Ti-30Ta após crescimento de nanotubos

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Corrosão e tribocorrosão de novas ligas Ti35Nb5Zr e Ti35Nb10Zr em saliva artificial

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Effect of Silver Nanoparticles in a Hydroxyapatite Coating applied by Atmospheric Plasma Spray

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Incorporação da apatita na superfície da liga Ti30ta empregando tratamento alcalino associado à eletrofiação de fibras de PCL

Pós-graduação em Engenharia Mecânica - FEG