Tab. 6+7: Altitudes and variations of altitudes in the area of the Filchner and Neumayer Stations

The determination of the strain and velocity behaviour of the ice surface near the two German Antarctic Stations on Filchner/Ronne and Ekström ice shelves was performed by the use of various geodetic measuring techniques. The relative positions and heights of control points valid for reference data were deduced from terrestrial observations (horizontal and vertical angle selectro optical distances). After a second sampling of data, these values served as the basis for the deformation analyses. Doppler-Satellite-observations (Navy Navigation Satellite System) made absolute positioning (latitude, longitude, height) of special points possible. These Doppler observations, supported by azimuth measurements (gyro-theodolite and sun observations) provided the datum of control networks (translations and orientation). After the repetition of these observations, the drift rates and azimuths of the control points as wenas the rotanon rates of the surface elements could be given. From vertical angles and horizontal distances differences in height end refraction coefficients were calculated. On days without clouds the refraction coefflcients increased by arnounts of up to 3.0 (in extreme cases up to 5.0). Distances over 1 km have to be subdivided to reach a standard deviation level of an heigh: difference better than 0.05 m. In order to determine the heterögeneity of refraction, some height differences should be measured with higher accuracy end-by subdivision of distances.

(Table 2) Production parameters of phytoplankton and some associated parameters in the area of the Titanic Polygon

Studies were carried out mostly in the area of RMS Titanic wreck site (41°44'N, 49°57'W) located above the continental slope and the south of the Grand Banks of Newfoundland. In a period from 18.06 to 24.09.2001 five surveys of production characteristics of surface phytoplankton were conducted over 5-9 days. Mean values of these characteristics obtained during the surveys were 9.2-11.7 mg C/m**3 per day for primary production (C_phs), 0.102-0.188 mg/m**3 for chlorophyll a (C_chls), and 4.44-7.42 mg C/mg chl. a per hour for assimilation number (AN). The main reason for low C_phs variability was a significant inverse relationship (R=-0.66) between AN and C_chls found over the research area. When cold shelf waters dominated in the area (27.07 to 19.08.2001), C_chls values for the slope region (0.125+/-0.031 µg/l) and for the outer shelf (0.130+/-0.040 µg/l) were similar. During strengthening of influence of warmer slope waters within area (from 29.08 to 13.09.2001), C_chls concentration within surface waters of the outer shelf was 0.152+/-0.039 µg/l and exceeded one for the slope region (0.094+/-0.004 µg/l) by factor 1.6. Against the background of low Cchls values, the High values of integral primary production in the water column (510-1010 mg C/m**2 per day) at low C_chls values measured within the area were determined both by high assimilation activity of phytoplankton and by the deep (30-40 m) maximum of primary production. Main reasons for formation of such a maximum were high chlorophyll concentration within the layer of the deep chlorophyll maximum (up to 0.5-2.5 µg/l) and in the relatively high solar irradiance within this layer varying from 1.4 to 8.6% of subsurface PAR.

CTD measurement at station GeoB12761-1 in the area of the Coral Patch seamount (NE Atlantic)

To gain information on the physical parameters of the water masses in the area of the Coral Patch seamount (NE Atlantic), one CTD measurement was accomplished in close vicinity to the seamount (station GeoB 12761: 34°31.210'N, 11°08.510'W, 4430m water depth). CTD measurement were conducted during R/V PELAGIA expedition 64PE284 in spring 2008 (Hebbeln and cruise participants, 2008, urn:nbn:de:gbv:46-ep000103738). The CTD measurement of the water column down to a maximum water depth of 2500m was conducted using a SEABIRD "SBE 9 plus" underwater unit and a SEABIRD "SBE 11 plus" deck unit. The vertical profile over the water column provided standard data for conductivity, temperature and pressure. Additionally, the CTD was equipped with sensors for optical backscatter (turbidity), fluorescence (chlorophyll) and dissolved oxygen. Conductivity and temperature data were used to compute salinity.

Pollen record in the area of Niederrheinische Bucht, Germany

Die Niederrheinische Bucht, ein altes tektonisches Senkungsgebiet, dessen Ausdehnung durch die Orte Aachen, Bonn, Duüsseldorf und Duisburg bestimmt ist, bildete während des jüngeren Tertiärs eine Meeresbucht am Südrande des Nordseebeckens. Noch zu Beginn des Pleistocäns erstreckte sich die Nordsee bis in den Raum von Nijmegen, und im Pliocän verlief die Kuüste etwa auf der Linie Maastricht-Kleve. Im Mittelmiocän reichte die Nordsee bis in die nördliche Niederrheinische Bucht. Marines Oberoligocän mit reicher Fauna findet sich noch in der Gegend von Köln. In Verbindung mit den marinen Transgressionen kam es in den inneren Teilen der Niederrheinischen Bucht zu mehr oder weniger ausgedehnten Vermoorungen, die zur Bildung von Braunkohlenflözen führten, unter denen das miocäne Hauptbraunkohlenflöz nordwestlich von Köln eine Mächtigkeit von mehr als 90 m erreicht. Nach NW spaltet sich das Hauptflöz in drei Teilflöze auf, die von oben nach unten als Flöz Garzweiler, Flöz Frimmersdorf und Flöz Morken bezeichnet werden. Diese Flöze können, wie neue Untersuchungen ergaben, eindeutig mit dem marinen Mittelmiocän in Verbindung gebracht werden.