Improvement of link failure restoration utilising multi-protocol label switching (MPLS) as a means to maintain quality of service (QOS)

This paper proposes a practical approach to the enhancement of Quality of Service (QoS) routing by means of providing alternative or repair paths in the event of a breakage of a working path. The proposed scheme guarantees that every Protected Node (PN) is connected to a multi-repair path such that no further failure or breakage of single or double repair paths can cause any simultaneous loss of connectivity between an ingress node and an egress node. Links to be protected in an MPLS network are predefined and a Label Switched path (LSP) request involves the establishment of a working path. The use of multi-protection paths permits the formation of numerous protection paths allowing greater flexibility. Our analysis examined several methods including single, double and multi-repair routes and the prioritization of signals along the protected paths to improve the Quality of Service (QoS), throughput, reduce the cost of the protection path placement, delay, congestion and collision. Results obtained indicated that creating multi-repair paths and prioritizing packets reduces delay and increases throughput in which case the delays at the ingress/egress LSPs were low compared to when the signals had not been classified. Therefore the proposed scheme provided a means to improve the QoS in path restoration in MPLS using available network resources. Prioritizing the packets in the data plane has revealed that the amount of traffic transmitted using a medium and low priority Label Switch Paths (LSPs) does not have any impact on the explicit rate of the high priority LSP in which case the problem of a knock-on effect is eliminated.

Denial of change: the 'Military Revolution' as seen by contemporaries

Writers on military matters from the 14th century until the late 18th century either regretted the decadence of their times compared with Antiquity, or they saw no great change in military affairs since Antiquity. Few saw a revolutionary change ushered in by gunpowder, although this number increased since the great "querelle" about the Ancients and the Moderns under Louis XIV. In the early 19th century, the balance tipped, and few would have denied that technology had profoundly changed warfare. All this is a far cry, however, from any contemporary perception of a "Military Revolution" in the 16th and 17th centuries.

Attacking human implants: a new generation of cybercrime

Human ICT implants, such as RFID implants, cochlear implants, cardiac pacemakers, Deep Brain Stimulation, bionic limbs connected to the nervous system, and networked cognitive prostheses, are becoming increasingly complex. With ever-growing data processing functionalities in these implants, privacy and security become vital concerns. Electronic attacks on human ICT implants can cause significant harm, both to implant subjects and to their environment. This paper explores the vulnerabilities which human implants pose to crime victimisation in light of recent technological developments, and analyses how the law can deal with emerging challenges of what may well become the next generation of cybercrime: attacks targeted at technology implanted in the human body. After a state-of-the-art description of relevant types of human implants and a discussion how these implants challenge existing perceptions of the human body, we describe how various modes of attacks, such as sniffing, hacking, data interference, and denial of service, can be committed against implants. Subsequently, we analyse how these attacks can be assessed under current substantive and procedural criminal law, drawing on examples from UK and Dutch law. The possibilities and limitations of cybercrime provisions (eg, unlawful access, system interference) and bodily integrity provisions (eg, battery, assault, causing bodily harm) to deal with human-implant attacks are analysed. Based on this assessment, the paper concludes that attacks on human implants are not only a new generation in the evolution of cybercrime, but also raise fundamental questions on how criminal law conceives of attacks. Traditional distinctions between physical and non-physical modes of attack, between human bodies and things, between exterior and interior of the body need to be re-interpreted in light of developments in human implants. As the human body and technology become increasingly intertwined, cybercrime legislation and body-integrity crime legislation will also become intertwined, posing a new puzzle that legislators and practitioners will sooner or later have to solve.

Rationality of service composition of Workflow Net in a service oriented architecture

Users’ requirements change drives an information system evolution. Consequently, such evolution affects those atomic services which provide functional operations from one state of their composition to another state of composition. A challenging issue associated with such evolution of the state of service composition is to ensure a resultant service composition remaining rational. This paper presents a method of Service Composition Atomic-Operation Set (SCAOS). SCAOS defines 2 classes of atomic operations and 13 kinds of basic service compositions to aid a state change process by using Workflow Net. The workflow net has algorithmic capabilities to compose the required services with rationality and maintain any changes to the services in a different composition also rational. This method can improve the adaptability to the ever changing business requirements of information systems in the dynamic environment.

The CURE scale: a multidimensional measure of service recovery strategy

Purpose – This paper aims to address the gaps in service recovery strategy assessment. An effective service recovery strategy that prevents customer defection after a service failure is a powerful managerial instrument. The literature to date does not present a comprehensive assessment of service recovery strategy. It also lacks a clear picture of the service recovery actions at managers’ disposal in case of failure and the effectiveness of individual strategies on customer outcomes. Design/methodology/approach – Based on service recovery theory, this paper proposes a formative index of service recovery strategy and empirically validates this measure using partial least-squares path modelling with survey data from 437 complainants in the telecommunications industry in Egypt. Findings – The CURE scale (CUstomer REcovery scale) presents evidence of reliability as well as convergent, discriminant and nomological validity. Findings also reveal that problem-solving, speed of response, effort, facilitation and apology are the actions that have an impact on the customer’s satisfaction with service recovery. Practical implications – This new formative index is of potential value in investigating links between strategy and customer evaluations of service by helping managers identify which actions contribute most to changes in the overall service recovery strategy as well as satisfaction with service recovery. Ultimately, the CURE scale facilitates the long-term planning of effective complaint management. Originality/value – This is the first study in the service marketing literature to propose a comprehensive assessment of service recovery strategy and clearly identify the service recovery actions that contribute most to changes in the overall service recovery strategy.

How do different densities in a network affect the optimal location of service centers?

The p-median problem is often used to locate p service centers by minimizing their distances to a geographically distributed demand (n). The optimal locations are sensitive to geographical context such as road network and demand points especially when they are asymmetrically distributed in the plane. Most studies focus on evaluating performances of the p-median model when p and n vary. To our knowledge this is not a very well-studied problem when the road network is alternated especially when it is applied in a real world context. The aim in this study is to analyze how the optimal location solutions vary, using the p-median model, when the density in the road network is alternated. The investigation is conducted by the means of a case study in a region in Sweden with an asymmetrically distributed population (15,000 weighted demand points), Dalecarlia. To locate 5 to 50 service centers we use the national transport administrations official road network (NVDB). The road network consists of 1.5 million nodes. To find the optimal location we start with 500 candidate nodes in the network and increase the number of candidate nodes in steps up to 67,000. To find the optimal solution we use a simulated annealing algorithm with adaptive tuning of the temperature. The results show that there is a limited improvement in the optimal solutions when nodes in the road network increase and p is low. When p is high the improvements are larger. The results also show that choice of the best network depends on p. The larger p the larger density of the network is needed. 

Principles of Personalisation of Service Discovery

We define personalisation as the set of capabilities that enables a user or an organisation to customise their working environment to suit their specific needs, preferences and circumstances. In the context of service discovery on the Grid, the demand for personalisation comes from individual users, who want their preferences to be taken into account during the search and selection of suitable services. These preferences can express, for example, the reliability of a service, quality of results, functionality, and so on. In this paper, we identify the problems related to personalising service discovery and present our solution: a personalised service registry or View. We describe scenarios in which personsalised service discovery would be useful and describe how our technology achieves them.

Apresentação multimédia com garantias de qualidade de serviço: QoSMedEval (Quality of Service Media Evaluation Tool)

Orientador: Paulo Nazareno Maia Sampaio

Quality of service control for rt-VBR connections in ATM networks

Nowadays, networks must support applications such as: distance learning, electronic commerce, access to Internet, Intranets and Extranets, voice over IP (Internet Protocol) and many others. These new applications, employing data, voice, and video traffic, require high bandwidth and Quality of Service (QoS). The ATM (Asynchronous Transfer Mode) technology, together with dynamic resource allocation methods, offers network connections that guarantee QoS parameters, such as minimum losses and delays. This paper presents a system that uses Network Management Functions together with dynamic resource allocation for provision of the end-to-end QoS parameters for rt-VBR connections.

Wireless mesh networks planning based on parameters of quality of service

The use of QoS parameters to evaluate the quality of service in a mesh network is essential mainly when providing multimedia services. This paper proposes an algorithm for planning wireless mesh networks in order to satisfy some QoS parameters, given a set of test points (TPs) and potential access points (APs). Examples of QoS parameters include: probability of packet loss and mean delay in responding to a request. The proposed algorithm uses a Mathematical Programming model to determine an adequate topology for the network and Monte Carlo simulation to verify whether the QoS parameters are being satisfied. The results obtained show that the proposed algorithm is able to find satisfactory solutions.

Transandean railroads: the interruption of service and prospects for resumption

Building the infrastructure and then operating a railroad which starts on the Pacific coast of South America and which, a few score kilometres inland, must climb close to 4,000 metres above sea level in the Andes mountains has always presented challenges both for the civil engineers responsible for its construction and for the managers in charge of its operation.As at mid-2001, two of the four transandean railroads that ran 20 years ago are out of service, owing to adverse weather conditions, and a third is not operating as a result of institutional problems.Nevertheless, two of the three railroads that are now shut down could resume service soon. Furthermore, there is a possibility that a new transandean railroad could be built that would cross the Andes mountains further south, at an altitude of less than 1,750 meters.

Quality of Service in Distributed Stream Processing for large scale Smart Pervasive Environments

The wide diffusion of cheap, small, and portable sensors integrated in an unprecedented large variety of devices and the availability of almost ubiquitous Internet connectivity make it possible to collect an unprecedented amount of real time information about the environment we live in. These data streams, if properly and timely analyzed, can be exploited to build new intelligent and pervasive services that have the potential of improving people's quality of life in a variety of cross concerning domains such as entertainment, health-care, or energy management. The large heterogeneity of application domains, however, calls for a middleware-level infrastructure that can effectively support their different quality requirements. In this thesis we study the challenges related to the provisioning of differentiated quality-of-service (QoS) during the processing of data streams produced in pervasive environments. We analyze the trade-offs between guaranteed quality, cost, and scalability in streams distribution and processing by surveying existing state-of-the-art solutions and identifying and exploring their weaknesses. We propose an original model for QoS-centric distributed stream processing in data centers and we present Quasit, its prototype implementation offering a scalable and extensible platform that can be used by researchers to implement and validate novel QoS-enforcement mechanisms. To support our study, we also explore an original class of weaker quality guarantees that can reduce costs when application semantics do not require strict quality enforcement. We validate the effectiveness of this idea in a practical use-case scenario that investigates partial fault-tolerance policies in stream processing by performing a large experimental study on the prototype of our novel LAAR dynamic replication technique. Our modeling, prototyping, and experimental work demonstrates that, by providing data distribution and processing middleware with application-level knowledge of the different quality requirements associated to different pervasive data flows, it is possible to improve system scalability while reducing costs.