Serpa cheese: technological, biochemical and microbiological characterisation of a PDO ewe's milk cheese coagulated with Cynara cardunculus L

Portugal has a strong tradition of cheesemaking from raw ewe's milk; most of these cheeses are still made on a traditional farmhouse scale. Their production is protected by Protected Designation of Origin (PDO) but the specific biochemical aspects of the majority still need to be characterised. Two different cheesemaking procedures, traditional and semi-industrial, were compared technologically, biochemically and microbiologically. It was observed that, despite the highly significant difference between artisanal and semi-industrial cheeses (P < 0.001), both products were within the limits of national regulations for most parameters except maturation temperature, humidity and the value for the maturation index. Although the present study was not fully representative of the region, the results obtained suggest that the specific regulations for Serpa cheese should be revised and that other parameters, such as moisture and salt-in-moisture content, which are very much dependent on the cheesemaking process, should be included in order to characterise better this traditional cheese.

Selection of operational parameters for the production of instant soy protein isolate by pulsed fluid bed agglomeration

The objective of this study was to select the optimal operational conditions for the production of instant soy protein isolate (SPI) by pulsed fluid bed agglomeration. The spray-dried SPI was characterized as being a cohesive powder, presenting cracks and channeling formation during its fluidization (Geldart type A). The process was carried out in a pulsed fluid bed, and aqueous maltodextrin solution was used as liquid binder. Air pulsation, at a frequency of 600 rpm, was used to fluidize the cohesive SPI particles and to allow agglomeration to occur. Seventeen tests were performed according to a central composite design. Independent variables were (i) feed flow rate (0.5-3.5 g/min), (ii) atomizing air pressure (0.5-1.5 bar) and (iii) binder concentration (10-50%). Mean particle diameter, process yield and product moisture were analyzed as responses. Surface response analysis led to the selection of optimal operational parameters, following which larger granules with low moisture content and high process yield were produced. Product transformations were also evaluated by the analysis of size distribution, flowability, cohesiveness and wettability. When compared to raw material, agglomerated particles were more porous and had a more irregular shape, presenting a wetting time decrease, free-flow improvement and cohesiveness reduction. (C) 2010 Elsevier B.V. All rights reserved.

Energy recovery from agro-industrial wastewaters through biohydrogen production: kinetic evaluation and technological feasibility

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Biological and behavioral parameters of the parasitoid Cotesia flavipes (Hymenoptera: Braconidae) are altered by the pathogen Nosema sp (Microsporidia: Nosematidae)

A major issue for mass rearing of insects concerns sanitary conditions and disease. Microsporidian infection (Nosema sp.) in laboratory colonies of Diatraea saccharalis (Fabr.) (Lepidoptera: Crambidae), used in producing the parasitoid. Cotesia flavipes Cameron (Hymenoptera: Braconidae), is representative of the problems faced by growers and industry. Although C. flavipes has been produced for several years in Brazil for biological control of D. saccharalis, we have only recently observed that the parasitoid becomes infected when developing inside hosts infected with Nosema sp. We assessed the effects of Nosema sp. on C. flavipes, including the ability to locate and select hosts, and evaluated pathogen transmission. Third instar larvae of D. saccharalis were inoculated with Nosema sp. spores at different concentrations and were parasitized when larvae reached fifth instar. Heavily infected D. saccharalis larvae did not support parasitism. Parasitoids that developed in infected D. saccharalis larvae exhibited increased duration of larval and pupal stages, decreased adult longevity and number of offspring, and reduced tibia size compared to parasitoids developing in uninfected D. saccharalis larvae. Infection by Nosema sp. reduced the ability of the C. flavipes parasitoid to distinguish between volatiles released by the sugarcane infested by healthy larvae and pure air. Uninfected parasitoids preferred plants infested with uninfected hosts. But infected C. flavipes did not differentiate between uninfected hosts and those infected with Nosema sp. The pathogen is transmitted from host to parasitoids and parasitoids to hosts. Pathogenic effects of the microsporidium in C. flavipes are sufficiently severe to justify disease management efforts, particularly considering the importance of C. flavipes as a biological control agent in sugarcane. (C) 2012 Elsevier Inc. All rights reserved.

A combined oral contraceptive containing drospirenone changes neither endothelial function nor hemodynamic parameters in healthy young women: a prospective clinical trial

Background: Combined oral contraceptives (COCs) may lead to a rise in cardiovascular disease risk, possibly associated with changes in blood pressure and endothelial function. Study Design: The objective was to evaluate the impact of COC containing 20 mcg of ethinylestradiol (EE) and 3 mg of drospirenone (DRSP) on the arterial endothelial function, systolic and diastolic blood pressure (SBP and DBP, respectively), heart rate (HR), cardiac output (CO) and total peripheral resistance (TPR) of healthy young women. Of the 71 women in the study, 43 were evaluated before the introduction of COC and after 6 months of its use (case group) and 28, COC nonusers, were assessed for the same parameters at the same time interval (control group). Results: No significant changes in endothelium-dependent and endothelium-independent functions or in measures of SBP, DBP, HR, CO and TPR caused by COC use were observed in the case group (p>.05 for all variables) or in the control group. Conclusion: These data suggest COC with 20 mcg EE and 3 mg DRSP does not alter arterial endothelial function or hemodynamic parameters in healthy young women. (C) 2012 Elsevier Inc. All rights reserved.

Design, synthesis and Chemical-physical characterization of photocatalytic inorganic nanocrystals for technological applications

This work was based on the synthesis and characterization of innovative crystals for biomedical and technological applications. Different types of syntheses were developed in order to obtain crystals with high photocatalytic properties. A hydrothermal synthesis was also processed to correlate the chemical-physical characteristics with synthesis parameters obtaining synthesis of nanoparticles of titanium dioxide with different morphology, size and crystalline phase depending on the variation of the synthesis parameters. Also a synthesis in water at 80 °C temperature and low pressure was developed from which anatase containing a small percentage of brookite nanoparticles were obtained, presenting a high photocatalytic activity. These particles have been used to obtain the microcrystals formed by an inorganic core of hydroxyapatite surface covered by TiO2 nanoparticles. Micrometer material with higher photocatalytic has been produced. The same nanoparticles have been functionalized with resorcinol oxidized in order to increase the photocatalytic efficiency. Photodegradation test results have confirmed this increase. Finally, synthetic nanoparticles with a waterless synthesis using formic acid and octanol, through esterification "in situ" were synthesized. Nanoparticles superficially covered by carboxylic residues able to bind a wide range of molecules to obtain further photocatalytic properties were obtained.

Ground penetrating radar early-time technique for soil electromagnetic parameters estimation

In recent years, thanks to the technological advances, electromagnetic methods for non-invasive shallow subsurface characterization have been increasingly used in many areas of environmental and geoscience applications. Among all the geophysical electromagnetic methods, the Ground Penetrating Radar (GPR) has received unprecedented attention over the last few decades due to its capability to obtain, spatially and temporally, high-resolution electromagnetic parameter information thanks to its versatility, its handling, its non-invasive nature, its high resolving power, and its fast implementation. The main focus of this thesis is to perform a dielectric site characterization in an efficient and accurate way studying in-depth a physical phenomenon behind a recent developed GPR approach, the so-called early-time technique, which infers the electrical properties of the soil in the proximity of the antennas. In particular, the early-time approach is based on the amplitude analysis of the early-time portion of the GPR waveform using a fixed-offset ground-coupled antenna configuration where the separation between the transmitting and receiving antenna is on the order of the dominant pulse-wavelength. Amplitude information can be extracted from the early-time signal through complex trace analysis, computing the instantaneous-amplitude attributes over a selected time-duration of the early-time signal. Basically, if the acquired GPR signals are considered to represent the real part of a complex trace, and the imaginary part is the quadrature component obtained by applying a Hilbert transform to the GPR trace, the amplitude envelope is the absolute value of the resulting complex trace (also known as the instantaneous-amplitude). Analysing laboratory information, numerical simulations and natural field conditions, and summarising the overall results embodied in this thesis, it is possible to suggest the early-time GPR technique as an effective method to estimate physical properties of the soil in a fast and non-invasive way.

One or two poles of attraction in the international technological cooperation process?

In recent years, international cooperation processes have become a key mechanism for companies to internationalise their innovative activities, par ticularly in the case of small businesses whose size reduces their possibilities of developing internationalisation strategies autonomously in the same way as larger companies. In Spain, the existence of two parallel programmes with similar structures oriented towards Europe (EUREKA) and Latin America (IBEROEKA) raises the question as to whether the fact that companies participate in only one (unipolar) or both (bipolar) of these programmes is the result of a selection process, which, in turn, results in the existence of different collectives with different efficiency parameters. The aim of this study is to provide a comparative analysis based on the final reports of Spanish companies that have participated in the EUREKA programme. Two groups of companies were compared: one comprising companies that have only had international experience in Europe (EUREKA); and another formed by companies that have also carried out IBEROEKA projects. The conclusions confirm that the behaviour of both groups of companies differs substantially and reveal the importance of geographical perspective in the analysis of international cooperation in technology. This disparate behaviour is a relevant aspect that must be taken into account when designing policies to promote international technological cooperation.

Leontief Model Analysis with Fuzzy Parameters by Basic Matrixes Method

The basic matrixes method is suggested for the Leontief model analysis (LM) with some of its components indistinctly given. LM can be construed as a forecast task of product’s expenses-output on the basis of the known statistic information at indistinctly given several elements’ meanings of technological matrix, restriction vector and variables’ limits. Elements of technological matrix, right parts of restriction vector LM can occur as functions of some arguments. In this case the task’s dynamic analog occurs. LM essential complication lies in inclusion of variables restriction and criterion function in it.

Quality improvement of traditional dry fermented sausages based on innovative technological strategies

Dry fermented sausages are highly appreciated food specialties, mainly in Portugal and other southern European countries. Therefore, all research efforts aiming at improving the food quality and safety of traditional dry sausages are of interest, since they are likely to result in products with higher added value and quality standards most suited to the requirements and concerns of the modern consumers. Among those efforts, it may be highlighted the studies involving innovative processing parameters and technologies to overcome practical problems gathered in the meat industry, which are mostly associated with food quality and safety. Additionally, characterization of traditional dry sausages and rationalization of their processing are essential for further achievement of any official certification. Thus, this article attempts to point out some research lines of highest interest in meat science (and particularly to the broad variety of regional dry fermented sausages), towards to the valorisation of technological, nutritional and commercial features. In addition, it is here emphasized the importance for the continuous improvement of the quality and safety of meat products as a way to respond to the current concerns regarding its consumption and the general advices in reducing its daily intake.

Nutritional technological characterization and secondary metabolites in stored carioca bean cultivars.

The recommendation of bean cultivars and the use of appropriate storage techniques allow the quality characteristics of these grains to be preserved for human consumption. The aim of this study was to characterize the effects of storage on three cultivars of the common carioca bean in raw form and to determine the relationships between storage time and technological quality parameters involved in the darkening and hardening of grains, the chemical composition of the beans and the presence of secondary metabolites. The experiment followed a completely randomized design (CRD) with a full factorial scheme consisting of two factors: bean cultivars, with three levels and storage time, with five levels. The color parameters and the storage times significantly differed between the cultivars. The cooking time, when compared to the water absorption index, indicated that the cultivars had, on average, a high percentage of moisture (>95%) and an average cooking time of 17 min., this applies to the control, while values increase during the storage time. Storage under ambient conditions led to a reduction in grain brightness parameters, characterized by darkening and hardening; no reduction in protein and mineral content; and an increase in iron, phosphorous, tannin, and phytic acid contents at 180 days.