On Dynamic Monitoring Methods for Networks-on-Chip

Rapid ongoing evolution of multiprocessors will lead to systems with hundreds of processing cores integrated in a single chip. An emerging challenge is the implementation of reliable and efficient interconnection between these cores as well as other components in the systems. Network-on-Chip is an interconnection approach which is intended to solve the performance bottleneck caused by traditional, poorly scalable communication structures such as buses. However, a large on-chip network involves issues related to congestion problems and system control, for instance. Additionally, faults can cause problems in multiprocessor systems. These faults can be transient faults, permanent manufacturing faults, or they can appear due to aging. To solve the emerging traffic management, controllability issues and to maintain system operation regardless of faults a monitoring system is needed. The monitoring system should be dynamically applicable to various purposes and it should fully cover the system under observation. In a large multiprocessor the distances between components can be relatively long. Therefore, the system should be designed so that the amount of energy-inefficient long-distance communication is minimized. This thesis presents a dynamically clustered distributed monitoring structure. The monitoring is distributed so that no centralized control is required for basic tasks such as traffic management and task mapping. To enable extensive analysis of different Network-on-Chip architectures, an in-house SystemC based simulation environment was implemented. It allows transaction level analysis without time consuming circuit level implementations during early design phases of novel architectures and features. The presented analysis shows that the dynamically clustered monitoring structure can be efficiently utilized for traffic management in faulty and congested Network-on-Chip-based multiprocessor systems. The monitoring structure can be also successfully applied for task mapping purposes. Furthermore, the analysis shows that the presented in-house simulation environment is flexible and practical tool for extensive Network-on-Chip architecture analysis.

Power cycling lifetime estimation of IGBT power modules based on chip temperature modeling

In this doctoral thesis, methods to estimate the expected power cycling life of power semiconductor modules based on chip temperature modeling are developed. Frequency converters operate under dynamic loads in most electric drives. The varying loads cause thermal expansion and contraction, which stresses the internal boundaries between the material layers in the power module. Eventually, the stress wears out the semiconductor modules. The wear-out cannot be detected by traditional temperature or current measurements inside the frequency converter. Therefore, it is important to develop a method to predict the end of the converter lifetime. The thesis concentrates on power-cycling-related failures of insulated gate bipolar transistors. Two types of power modules are discussed: a direct bonded copper (DBC) sandwich structure with and without a baseplate. Most common failure mechanisms are reviewed, and methods to improve the power cycling lifetime of the power modules are presented. Power cycling curves are determined for a module with a lead-free solder by accelerated power cycling tests. A lifetime model is selected and the parameters are updated based on the power cycling test results. According to the measurements, the factor of improvement in the power cycling lifetime of modern IGBT power modules is greater than 10 during the last decade. Also, it is noticed that a 10 C increase in the chip temperature cycle amplitude decreases the lifetime by 40%. A thermal model for the chip temperature estimation is developed. The model is based on power loss estimation of the chip from the output current of the frequency converter. The model is verified with a purpose-built test equipment, which allows simultaneous measurement and simulation of the chip temperature with an arbitrary load waveform. The measurement system is shown to be convenient for studying the thermal behavior of the chip. It is found that the thermal model has a 5 C accuracy in the temperature estimation. The temperature cycles that the power semiconductor chip has experienced are counted by the rainflow algorithm. The counted cycles are compared with the experimentally verified power cycling curves to estimate the life consumption based on the mission profile of the drive. The methods are validated by the lifetime estimation of a power module in a direct-driven wind turbine. The estimated lifetime of the IGBT power module in a direct-driven wind turbine is 15 000 years, if the turbine is located in south-eastern Finland.

One chip solution for low-cost active magnetic bearing system

In this work the implementation of the active magnetic bearing control system in a single FPGA is studied. Requirements for the full magnetic bearing control system are reviewed. Different control methods for active magnetic bearings are described shortly. Flux and the current base controllers are implemented in a FPGA. Suitability of the con-trollers for a low-cost magnetic bearing application is studied. Floating-point arithmetic’s are used in the controllers to ease designing burden and improve calculation precision. Per-formance of the flux controller is verified with simulations.

Development of conditioned taste aversion to Mascagnia rigida in goats

The aim of this study was to determine whether goats could be averted from consuming Mascagnia rigida, a toxic plant found in the semiarid region of northeastern Brazil. Fourteen male goats not previously familiarized to M. rigida were randomly allocated to two treatment groups: control (treated with 5.5mL water orally by a drenching gun) and lithium group (treated with 100mg LiCl/kg body weight orally by a drenching gun). For conditioning, goats were allowed to feed on M. rigida leaves for 15 min, followed by LiCl or water administration. The time spent on eating M. rigida leaves was measured. The conditioning was repeated daily until the LiCl-treated goats stopped eating M. rigida. On the 10th, 17th, and 24th day after conditioning, extinction trials of the M. rigida aversion were performed in goats by using single-choice tests. There was no difference between the two treatment groups with respect to the consumption of M. rigida on the first day of aversion conditioning, however, controls ingested increasing amounts of the plant on consecutive conditioning days. On the second day, five out of the seven goats in the lithium group did not eat the leaves, but on the third day, all the goats in the lithium group did not ingest M. rigida. This aversion persisted throughout all evaluated days. This indicates that goats can be easily conditioned by using lithium chloride to avoid eating M. rigida temporarily.

A Model-Based Development and Verification Framework for Distributed System-on-Chip Architecture

The capabilities and thus, design complexity of VLSI-based embedded systems have increased tremendously in recent years, riding the wave of Moore’s law. The time-to-market requirements are also shrinking, imposing challenges to the designers, which in turn, seek to adopt new design methods to increase their productivity. As an answer to these new pressures, modern day systems have moved towards on-chip multiprocessing technologies. New architectures have emerged in on-chip multiprocessing in order to utilize the tremendous advances of fabrication technology. Platform-based design is a possible solution in addressing these challenges. The principle behind the approach is to separate the functionality of an application from the organization and communication architecture of hardware platform at several levels of abstraction. The existing design methodologies pertaining to platform-based design approach don’t provide full automation at every level of the design processes, and sometimes, the co-design of platform-based systems lead to sub-optimal systems. In addition, the design productivity gap in multiprocessor systems remain a key challenge due to existing design methodologies. This thesis addresses the aforementioned challenges and discusses the creation of a development framework for a platform-based system design, in the context of the SegBus platform - a distributed communication architecture. This research aims to provide automated procedures for platform design and application mapping. Structural verification support is also featured thus ensuring correct-by-design platforms. The solution is based on a model-based process. Both the platform and the application are modeled using the Unified Modeling Language. This thesis develops a Domain Specific Language to support platform modeling based on a corresponding UML profile. Object Constraint Language constraints are used to support structurally correct platform construction. An emulator is thus introduced to allow as much as possible accurate performance estimation of the solution, at high abstraction levels. VHDL code is automatically generated, in the form of “snippets” to be employed in the arbiter modules of the platform, as required by the application. The resulting framework is applied in building an actual design solution for an MP3 stereo audio decoder application.

Sodium taste threshold in children and its relationship to blood pressure

Popular science has emphasized the risks of high sodium intake and many studies have confirmed that salt intake is closely related to hypertension. The present mini-review summarizes experiments about salt taste sensitivity and its relationship with blood pressure (BP) and other variables of clinical and familial relevance. Children and adolescents from control parents (N = 72) or with at least one essential hypertensive (EHT) parent (N = 51) were investigated. Maternal questionnaires on eating habits and vomiting episodes were collected. Offspring, anthropometric, BP, and salt taste sensitivity values were recorded and blood samples analyzed. Most mothers declared that they added "little salt" when cooking. Salt taste sensitivity was inversely correlated with systolic BP (SBP) in control youngsters (r = -0.33; P = 0.015). In the EHT group, SBP values were similar to control and a lower salt taste sensitivity threshold. Obese offspring of EHT parents showed higher SBP and C-reactive protein values but no differences in renin-angiotensin-aldosterone system activity. Salt taste sensitivity was correlated with SBP only in the non-obese EHT group (N = 41; r = 0.37; P = 0.02). Salt taste sensitivity was correlated with SBP in healthy, normotensive children and adolescents whose mothers reported significant vomiting during the first trimester (N = 18; r = -0.66; P < 0.005), but not in "non-vomiter offspring" (N = 54; r = -0.18; nonsignificant). There is evidence for a linkage between high blood pressure, salt intake and sensitivity, perinatal environment and obesity, with potential physiopathological implications in humans. This relationship has not been studied comprehensively using homogeneous methods and therefore more research is needed in this field.

ChIP-seq analysis of histone H3K9 trimethylation in peripheral blood mononuclear cells of membranous nephropathy patients

Membranous nephropathy (MN), characterized by the presence of diffuse thickening of the glomerular basement membrane and subepithelial in situimmune complex disposition, is the most common cause of idiopathic nephrotic syndrome in adults, with an incidence of 5-10 per million per year. A number of studies have confirmed the relevance of several experimental insights to the pathogenesis of human MN, but the specific biomarkers of MN have not been fully elucidated. As a result, our knowledge of the alterations in histone methylation in MN is unclear. We used chromatin immunoprecipitation followed by high-throughput sequencing (ChIP-seq) to analyze the variations in a methylated histone (H3K9me3) in peripheral blood mononuclear cells from 10 MN patients and 10 healthy subjects. There were 108 genes with significantly different expression in the MN patients compared with the normal controls. In MN patients, significantly increased activity was seen in 75 H3K9me3 genes, and decreased activity was seen in 33, compared with healthy subjects. Five positive genes, DiGeorge syndrome critical region gene 6 (DGCR6), sorting nexin 16 (SNX16), contactin 4 (CNTN4), baculoviral IAP repeat containing 3 (BIRC3), and baculoviral IAP repeat containing 2 (BIRC2), were selected and quantified. There were alterations of H3K9me3 in MN patients. These may be candidates to help explain pathogenesis in MN patients. Such novel findings show that H3K9me3 may be a potential biomarker or promising target for epigenetic-based MN therapies.

The conclusion of the deduction of taste in the dialectic of the power of judgment aesthetic in Kant

In this paper, it is argued that only in the section on dialectic in the Critique of Judgment does Kant reach a definitive and conclusive version of deduction, after discovering the concept of the supersensible. In the section on the deduction of pure aesthetic judgments, Kant does not satisfactorily explain the critical distinction between the sensible nature of humanity and the supersensible nature of human reason presupposed in the concept of universal communicability. While the concept of the supersensible illustrates this distinction, it is only through this concept that Kant that can justify the specific possibility of claiming subjective validity in taste. The priority of the solution found in the dialectic is illustrated not only by a comparative analysis of the two sections, but also by a historical reconstruction of the process of the formation of the work, which shows that the first formulation of the concept of validity coincides with the use of the concept of the supersensible.

A magnificient collection of manuscripts formed by a gentleman of consummate taste and judgment... : Sotheby, 7 juin 1876

[Vente. Livres. 1876-06-07. Londres]

The metacognitive cue of fluency on taste perception

The relative ease tha t a person experiences while performing cognitive operations, namely processing fluency, affects a broad range of judgments such as product evaluations. For example, an increase in fluency through repeated exposure to product packages enhances attitude toward the brand (Janiszewski 1993). This thesis examined the effect of fluency on taste perception and demonstrated where the fluency created an advantage or disfluency created a disadvantage for taste evaluations. Experiment 1 examined the effect of perceptual fluency on taste perception. It was found that perceptual disfluency derived from r eading the labels (i.e., font) lowered taste evaluations only when it was experienced be for the sensory experience. Experiment 2 examined the effect of linguistic fluency (i.e., pronunciation) on taste perception. However there was no evidence for the effect of linguistic fluency on taste perception. Thus, it is concluded that either the effect size of linguistic fluency is lower than perceptual fluency, or participants discounted their linguistic fluency experience because they realized that the brand names used in Experiment 2 were not real brand names. To sum up, it was found that perceptual disfluency created by presenting a difficult to read product-related information created a disadvantage for taste perception compared to when no information was presented. Therefore, this thesis provides the first evidence for the effect of the metacognitive cue of fluency on sensory evaluations.

Genetic Analysis of Taste in Homo Sapiens

There are many known taste receptors specific to each taste attribute. This thesis examines the relationship between single nucleotide polymorphisms (SNPs) and copy number variations (CNVs) in known taste and taste pathway receptors TAS2R38, Gustin, and TRPM5 and for PROP (6-n-propylthiouracil) taster status (PTS), thermal taster status (TTS), and orosensory sensation intensity ratings. PTS is a proxy for general taste responsiveness, and the ability to taste PROP classifies individuals into three phenotypes: super (PST), medium (PMT), and non-tasters (PNT). Another taste phenotype, also serving as a proxy for general taste responsiveness, is TTS, classifying individuals as thermal tasters (TTs) or thermal non-tasters (TnTs). DNA extractions from buccal cells obtained from 60 individuals were performed and analysis of TAS2R38, Gustin, and TRPM5 variations were conducted through Polymerase Chain Reaction (PCR), sequencing for SNPs, and upQMPSF for CNV analysis of TRPM5. Among the SNPs and CNVs studied, only TAS2R38 was found to be significantly associated with PTS and intensity ratings for sweet, bitter, and sour taste as well as astringency. However, not all PROP phenotypic differences can be explained by the variations at these three SNP sites in TAS2R38, suggesting the involvement of additional genes. No association was found between TTS and TAS2R38 or Gustin, confirming that PTS and TTS are not genetically associated. The examined TRPM5 SNPs and CNVs did not correlate with TTS. Therefore, further research is necessary into other factors contributing to PTS and TTS.

Développement d’outils pour l’analyse de données de ChIP-seq et l’identification des facteurs de transcription

La méthode ChIP-seq est une technologie combinant la technique de chromatine immunoprecipitation avec le séquençage haut-débit et permettant l’analyse in vivo des facteurs de transcription à grande échelle. Le traitement des grandes quantités de données ainsi générées nécessite des moyens informatiques performants et de nombreux outils ont vu le jour récemment. Reste cependant que cette multiplication des logiciels réalisant chacun une étape de l’analyse engendre des problèmes de compatibilité et complique les analyses. Il existe ainsi un besoin important pour une suite de logiciels performante et flexible permettant l’identification des motifs. Nous proposons ici un ensemble complet d’analyse de données ChIP-seq disponible librement dans R et composé de trois modules PICS, rGADEM et MotIV. A travers l’analyse de quatre jeux de données des facteurs de transcription CTCF, STAT1, FOXA1 et ER nous avons démontré l’efficacité de notre ensemble d’analyse et mis en avant les fonctionnalités novatrices de celui-ci, notamment concernant le traitement des résultats par MotIV conduisant à la découverte de motifs non détectés par les autres algorithmes.

Une nouvelle approche computationnelle pour la découverte des sites de fixation de facteurs de transcription à l’ADN, adaptée aux données de ChIP-chip et de ChIP-séquençage

Les facteurs de transcription sont des protéines spécialisées qui jouent un rôle important dans différents processus biologiques tel que la différenciation, le cycle cellulaire et la tumorigenèse. Ils régulent la transcription des gènes en se fixant sur des séquences d’ADN spécifiques (éléments cis-régulateurs). L’identification de ces éléments est une étape cruciale dans la compréhension des réseaux de régulation des gènes. Avec l’avènement des technologies de séquençage à haut débit, l’identification de tout les éléments fonctionnels dans les génomes, incluant gènes et éléments cis-régulateurs a connu une avancée considérable. Alors qu’on est arrivé à estimer le nombre de gènes chez différentes espèces, l’information sur les éléments qui contrôlent et orchestrent la régulation de ces gènes est encore mal définie. Grace aux techniques de ChIP-chip et de ChIP-séquençage il est possible d’identifier toutes les régions du génome qui sont liées par un facteur de transcription d’intérêt. Plusieurs approches computationnelles ont été développées pour prédire les sites fixés par les facteurs de transcription. Ces approches sont classées en deux catégories principales: les algorithmes énumératifs et probabilistes. Toutefois, plusieurs études ont montré que ces approches génèrent des taux élevés de faux négatifs et de faux positifs ce qui rend difficile l’interprétation des résultats et par conséquent leur validation expérimentale. Dans cette thèse, nous avons ciblé deux objectifs. Le premier objectif a été de développer une nouvelle approche pour la découverte des sites de fixation des facteurs de transcription à l’ADN (SAMD-ChIP) adaptée aux données de ChIP-chip et de ChIP-séquençage. Notre approche implémente un algorithme hybride qui combine les deux stratégies énumérative et probabiliste, afin d’exploiter les performances de chacune d’entre elles. Notre approche a montré ses performances, comparée aux outils de découvertes de motifs existants sur des jeux de données simulées et des jeux de données de ChIP-chip et de ChIP-séquençage. SAMD-ChIP présente aussi l’avantage d’exploiter les propriétés de distributions des sites liés par les facteurs de transcription autour du centre des régions liées afin de limiter la prédiction aux motifs qui sont enrichis dans une fenêtre de longueur fixe autour du centre de ces régions. Les facteurs de transcription agissent rarement seuls. Ils forment souvent des complexes pour interagir avec l’ADN pour réguler leurs gènes cibles. Ces interactions impliquent des facteurs de transcription dont les sites de fixation à l’ADN sont localisés proches les uns des autres ou bien médier par des boucles de chromatine. Notre deuxième objectif a été d’exploiter la proximité spatiale des sites liés par les facteurs de transcription dans les régions de ChIP-chip et de ChIP-séquençage pour développer une approche pour la prédiction des motifs composites (motifs composés par deux sites et séparés par un espacement de taille fixe). Nous avons testé ce module pour prédire la co-localisation entre les deux demi-sites ERE qui forment le site ERE, lié par le récepteur des œstrogènes ERα. Ce module a été incorporé à notre outil de découverte de motifs SAMD-ChIP.

Studying the cytomechanic aspects of pollen tube growth behavior using Lab-On-Chip technology

L'élongation cellulaire de cellules cultivant bout comme hyphae fongueux, inculquez hairs, des tubes de pollen et des neurones, est limité au bout de la cellule, qui permet à ces cellules d'envahir l'encerclement substrate et atteindre une cible. Les cellules cultivant bout d'équipement sont entourées par le mur polysaccharide rigide qui régule la croissance et l'élongation de ces cellules, un mécanisme qui est radicalement différent des cellules non-walled. La compréhension du règlement du mur de cellule les propriétés mécaniques dans le contrôle de la croissance et du fonctionnement cellulaire du tube de pollen, une cellule rapidement grandissante d'équipement, est le but de ce projet. Le tube de pollen porte des spermatozoïdes du grain de pollen à l'ovule pour la fertilisation et sur sa voie du stigmate vers l'ovaire le tube de pollen envahit physiquement le stylar le tissu émettant de la fleur. Pour atteindre sa cible il doit aussi changer sa direction de croissance les temps multiples. Pour évaluer la conduite de tubes de pollen grandissants, un dans le système expérimental vitro basé sur la technologie de laboratoire-sur-fragment (LOC) et MEMS (les systèmes micro-électromécaniques) ont été conçus. En utilisant ces artifices nous avons mesuré une variété de propriétés physiques caractérisant le tube de pollen de Camélia, comme la croissance la croissance accélérée, envahissante et dilatant la force. Dans une des organisations expérimentales les tubes ont été exposés aux ouvertures en forme de fente faites de l'élastique PDMS (polydimethylsiloxane) la matière nous permettant de mesurer la force qu'un tube de pollen exerce pour dilater la croissance substrate. Cette capacité d'invasion est essentielle pour les tubes de pollen de leur permettre d'entrer dans les espaces intercellulaires étroits dans les tissus pistillar. Dans d'autres essais nous avons utilisé l'organisation microfluidic pour évaluer si les tubes de pollen peuvent s'allonger dans l'air et s'ils ont une mémoire directionnelle. Une des applications auxquelles le laboratoire s'intéresse est l'enquête de processus intracellulaires comme le mouvement d'organelles fluorescemment étiqueté ou les macromolécules pendant que les tubes de pollen grandissent dans les artifices LOC. Pour prouver que les artifices sont compatibles avec la microscopie optique à haute résolution et la microscopie de fluorescence, j'ai utilisé le colorant de styryl FM1-43 pour étiqueter le système endomembrane de tubes de pollen de cognassier du Japon de Camélia. L'observation du cône de vésicule, une agrégation d'endocytic et les vésicules exocytic dans le cytoplasme apical du bout de tube de pollen, n'a pas posé de problèmes des tubes de pollen trouvés dans le LOC. Pourtant, le colorant particulier en question a adhéré au sidewalls du LOC microfluidic le réseau, en faisant l'observation de tubes de pollen près du difficile sidewalls à cause du signal extrêmement fluorescent du mur. Cette propriété du colorant pourrait être utile de refléter la géométrie de réseau en faisant marcher dans le mode de fluorescence.