Biofabrication of customized bone grafts by combination of additive manufacturing and bioreactor knowhow

This study reports on an original concept of additive manufacturing for the fabrication of tissue engineered constructs (TEC), offering the possibility of concomitantly manufacturing a customized scaffold and a bioreactor chamber to any size and shape. As a proof of concept towards the development of anatomically relevant TECs, this concept was utilized for the design and fabrication of a highly porous sheep tibia scaffold around which a bioreactor chamber of similar shape was simultaneously built. The morphology of the bioreactor/scaffold device was investigated by micro-computed tomography and scanning electron microscopy confirming the porous architecture of the sheep tibiae as opposed to the non-porous nature of the bioreactor chamber. Additionally, this study demonstrates that both the shape, as well as the inner architecture of the device can significantly impact the perfusion of fluid within the scaffold architecture. Indeed, fluid flow modelling revealed that this was of significant importance for controlling the nutrition flow pattern within the scaffold and the bioreactor chamber, avoiding the formation of stagnant flow regions detrimental for in vitro tissue development. The bioreactor/scaffold device was dynamically seeded with human primary osteoblasts and cultured under bi-directional perfusion for two and six weeks. Primary human osteoblasts were observed homogenously distributed throughout the scaffold, and were viable for the six week culture period. This work demonstrates a novel application for additive manufacturing in the development of scaffolds and bioreactors. Given the intrinsic flexibility of the additive manufacturing technology platform developed, more complex culture systems can be fabricated which would contribute to the advances in customized and patient-specific tissue engineering strategies for a wide range of applications.

In vitro pre-vascularisation of tissue-engineered constructs: A co-culture perspective

In vitro pre-vascularization is one of the main vascularization strategies in the tissue engineering field. Culturing cells within a tissue-engineered construct (TEC) prior to implantation provides researchers with a greater degree of control over the fate of the cells. However, balancing the diverse range of different cell culture parameters in vitro is seldom easy and in most cases, especially in highly vascularized tissues, more than one cell type will reside within the cell culture system. Culturing multiple cell types in the same construct presents its own unique challenges and pitfalls. The following review examines endothelial-driven vascularization and evaluates the direct and indirect role other cell types have in vessel and capillary formation. The article then analyses the different parameters researchers can modulate in a co-culture system in order to design optimal tissue-engineered constructs to match desired clinical applications.

Growth factor-loaded microparticles for tissue engineering: The discrepancies of in vitro characterization assays

Efficient and effective growth factor (GF) delivery is an ongoing challenge for tissue regeneration therapies. The accurate quantification of complex molecules such as GFs, encapsulated in polymeric delivery devices, is equally critical and just as complex as achieving efficient delivery of active GFs. In this study, GFs relevant to bone tissue formation, vascular endothelial growth factor (VEGF) and bone morphogenetic protein 7 (BMP-7), were encapsulated, using the technique of electrospraying, into poly(lactic-co-glycolic acid) microparticles that contained poly(ethylene glycol) and trehalose to assist GF bioactivity. Typical quantification procedures, such as extraction and release assays using saline buffer, generated a significant degree of GF interactions, which impaired accurate assessment by enzyme-linked immunosorbent assay (ELISA). When both dry BMP-7 and VEGF were processed with chloroform, as is the case during the electrospraying process, reduced concentrations of the GFs were detected by ELISA; however, the biological effect on myoblast cells (C2C12) or endothelial cells (HUVECs) was unaffected. When electrosprayed particles containing BMP-7 were cultured with preosteoblasts (MC3T3-E1), significant cell differentiation into osteoblasts was observed up to 3 weeks in culture, as assessed by measuring alkaline phosphatase. In conclusion, this study showed how electrosprayed microparticles ensured efficient delivery of fully active GFs relevant to bone tissue engineering. Critically, it also highlights major discrepancies in quantifying GFs in polymeric microparticle systems when comparing ELISA with cell-based assays.

Crystal structure, thermal expansion and electrical conductivity of Nd0.7Sr0.3Fe1-xCoxO3 (0 <= x <= 0.8)

The crystal structure, thermal expansion and electrical conductivity of the solid solution Nd0.7Sr0.3Fe1-xCoxO3 for 0 less than or equal to x less than or equal to 0.8 were investigated. All compositions had the GdFeO3-type orthorhombic perovskite structure. The lattice parameters were determined at room temperature by X-ray powder diffraction (XRPD). The pseudo-cubic lattice constant decreased continuously with x. The average linear thermal expansion coefficient (TEC) in the temperature range from 573 to 973 K was found to increase with x. The thermal expansion curves for all values of x displayed rapid increase in slope at high temperatures. The electrical conductivity increased with x for the entire temperature range of measurement. The calculated activation energy values indicate that electrical conduction takes place primarily by the small polaron hopping mechanism. The charge compensation for the divalent ion on the A-site is provided by the formation of Fe4+ ions on the B-site (in preference to Co4+ ions) and vacancies on the oxygen sublattice for low values of x. The large increase in the conductivity with x in the range from 0.6 to 0.8 is attributed to the substitution of Fe4+ ions by Co4+ ions. The Fe site has a lower small polaron site energy than Co and hence behaves like a carrier trap, thereby drastically reducing the conductivity. The non-linear behaviour in the dependence of log sigmaT with reciprocal temperature can be attributed to the generation of additional charge carriers with increasing temperature by the charge disproportionation of Co3+ ions. (C) 2002 Elsevier Science B.V. All rights reserved.

Role of Management Decision Variables in Determining Technology Progress and Technical Efficiency in Indian Electronic Industry

This paper analyses the influence of management on Technical Efficiency Change (TEC) and Technological Progress (TP) in the communication equipment and consumer electronics sub-sectors of Indian hardware electronics industry. Each sub-sector comprises 13 sample firms for two time periods.The primary objective is to determine the relative contribution of TP and TEC to TFP Growth (TFPG) and to establish the influence of firm specific operational management decision variables on these two components. The study finds that both the sub-sectors have strived and achieved steady TP but not TEC in the period of economic liberalisation to cope with the intensifying competition. The management decisions with respect to asset and profit utilization, vertical integration, among others, improved TP and TE in the sub-sectors. However, R&D investments and technology imports proved costly for TFP indicating inadequate efforts and/or poor resource utilisation by the management. Management was found to be complacent in terms of improving or developing their own technology as indicated by their higher dependence on import of raw materials and no influence of R&D on TP.

Total Factor Productivity Growth and Output Growth in Indian Electronics Industry in the Liberalization Era: An Empirical Examination

This paper analyses the efficiency and productivity growth of Electronics industry, which is considered one of the vibrant and rapidly growing manufacturing industry sub-sectors of India in the liberalization era since 1991. The main objective of the paper is to examine the extent and growth of Total Factor Productivity (TFP) and its components namely, Technical Efficiency Change (TEC) and Technological Progress (TP) and its contribution to total output growth. In this study, the electronics industry is broadly classified into communication equipments, computer hardware, consumer electronics and other electronics, with the purpose of performing a comparative analysis of productivity growth for each of these sub-sectors for the time period 1993-2004. The paper found that the sub-sectors have improved in terms of economies of scale and contribution of capital.The change in technical efficiency and technological progress moved in reverse directions. Three of the four industry witnessed growth in the output primarily due to TFPG and the contribution of input growth to output growth had been negative/negligible, except for Computer hardware where contribution from both input growth and TFPG to output growth were prominent. The paper explored the possible reasons that addressed the issue of low technical efficiency and technological progress in the industry.

Assembly and inspection of liquid crystal on silicon devices

Liquid crystal on silicon (LCOS) is one of the most exciting technologies, combining the optical modulation characteristics of liquid crystals with the power and compactness of a silicon backplane. The objective of our work is to improve cell assembly and inspection methods by introducing new equipment for automated assembly and by using an optical inspection microscope. A Suss-Micro'Tec Universal device bonder is used for precision assembly and device packaging and an Olympus BX51 high resolution microscope is employed for device inspection. ©2009 Optical Society of America.

Investigation of spatial repeatability using a tire force measuring mat

A portable mat for measuring the dynamic tire forces of commercial vehicles is described. The mat is 56 m long and 13 mm thick and has 141 capacitative strip sensors spaced at 0.4-m intervals. The accuracy of the mat for measuring dynamic tire forces generated by heavy commercial vehicles is assessed using an instrumented vehicle. The spatial repeatability of dynamic wheel loads generated by 14 uninstrumented articulated vehicles is investigated, and it is concluded that approximately half of the vehicles tested are likely to contribute to a repeatable pattern of road loading.

Assessing the relative road damaging potential of HGVs

Assessing the road damaging potential of heavy vehicles is becoming an increasingly important issue. In this paper, current vehicle regulations and possible future alternatives are reviewed, and are categorized as tests on individual axles and whole vehicles, and 'direct' and 'indirect' tests. Whole vehicle methods of assessing road damaging potential accurately are then discussed. Direct methods are investigated (focussing on using a force measuring mat), and drawbacks are highlighted. Indirect methods using a transient input applied to individual axles are then examined. Results indicate that if non-linearities are accounted for properly, indirect methods of assessing whole vehicle road damaging potential could offer the required accuracy for a possible future test procedure.

Marango: cultivo y utilización en la alimentación animal

La Universidad Nacional Agraria, institución de educación superior, autó­noma que promueve el desarrollo y fortalecimiento de la sociedad nica­ragüense, que forma profesionales en el campo agropecuario y forestal y genera conocimientos científicos, pone en manos de la sociedad nicaragüense la guía técnica MARANGO: Cultivo y utilización en la alimentación animal. La información que contiene es producto de la experiencia desarrollada por profe­sionales y técnicos de la universidad, de los resultados de investigaciones reali­ zadas por docentes y estudiantes de la Facultad de Ciencia Animal (FACA) y del intercambio de experiencias con instituciones afines que realizan investigación en el campo agropecuario y forestal. El objetivo de las GUIAS TÉCNICAS es apoyar a técnicos y productores en la toma de decisiones sobre la producción de los cultivos, el manejo pecuario y los procesos agroindustriales que den ma­yor competitividad al sector agropecuario y forestal. De igual forma, contribuir al manejo integral de las fincas, desde una perspectiva agro ecológica. La publicación de las GUIAS TÉCNICAS, se constituye en una las estrategias con las que cuenta la Universidad para la difusión de su quehacer universitario. Estas se unen al Centro Nacional de Información y Documentación Agrope­cuaria (CENIDA), así como a la infraestructura y equipo para la investigación (laboratorios y personal técnico), a los medios de divulgación de los resultados de la investigación, eventos científicos y la revista científica La Calera. Las GUIAS TÉCNICAS han sido elaboradas con el propósito de hacerlas acces i­ ble a una amplia audiencia, que incluye productores, profesionales, técnicos y estudiantes, de tal forma que se constituyan en una herramienta de consulta, enseñanza y aprendizaje, que motiven la investigación y la adopción de tec­ nologías, y que contribuyan de la mejor manera al desarrollo agropecuario y forestal de Nicaragua

Control biológico de la broca del café (Hypothenemus hampei)

La Universidad Nacional Agraria, institución de educación superior, autó­noma que promueve el desarrollo y fortalecimiento de la sociedad nica­ragüense, que forma profesionales en el campo agropecuario y forestal y genera conocimientos científicos, pone en manos de la sociedad nicaragüense la guía técnica CONTROL BIOLÓGICO DE LA BROCA DEL CAFÉ (Hypothenemus hampei), la cual posee información relevante y actualizada sobre el uso de hongos entomopatogenos para la regulación de plagas. La información que contiene es producto de la experiencia desarrollada por profesionales y técni­cos de la universidad, de los resultados de investigaciones realizadas por do­ centes y estudiantes del GRUPO DE ABONOS ORGANICOS DE LA FACULTAD DE AGRONOMIA (FAGRO) y del intercambio de experiencias con instituciones afines que realizan investigación en el campo agropecuario y forestal. EI objetivo de las GUIAS TÉCNICAS es apoyar a técnicos y productores en la toma de decisiones sobre la producción de los cultivos, el manejo pecuario y los procesos agroin­dustriales que den mayor competitividad al sector agropecuario y forestal. De igual forma, contribuir al manejo integral de las fincas, desde una perspectiva agro ecológica. La publicación de las GUIAS TÉCNICAS, se constituye en una las estrategias con las que cuenta la Universidad para la difusión de su quehacer universitario. Estas se unen al Centro Nacional de Información y Documentación Agrope­cuaria (CENIDA), así como a la infraestructura y equipo para la investigación (laboratorios y personal técnico), a los medios de divulgación de los resultados de la investigación, eventos científicos y la revista científica La Calera. Las GUIAS TÉCNICAS han sido elaboradas con el propósito de hacerlas accesi­ble a una amplia audiencia, que incluye productores, profesionales, técnicos y estudiantes, de tal forma que se constituyan en una herramienta de consulta, enseñanza y aprendizaje, que motiven la investigación y la adopción de tec­ nologías, y que contribuyan de la mejor manera al desarrollo agropecuario y forestal de Nicaragua.

Niveles de nutrientes y pigmentos fotosintéticos en el Río de la Plata interior (55°-59°W 34°-36°S)

The "Río de la Plata" River is one of the less studied systems of the basin with respect to its biological and ecological aspects. Twenty four and twenty seven surface stations were sample on September 22-23 and November 22-23, 1982, respectively. The section studied is part of the zone called inner "Río de la Plata" River. The discharge was 29.000 m3/s in September and 45.200 m3/s in November. Total phosphorus (PT), total organic nitrogen (NOT), chemical oxygen demad (COT) and total cholrophyll were measured. Dissolved oxygen (DO), turbidity (TURB), pH and electrical conductivity (K20) were also measured at the surface with a HORIBA U7 sensor on November 1982. PT was 72-208 mg/m3 and 66-205 mg/m3 in September and November repectively; the higher values were near the Argentinian coast and the outer zone. NOT was 33-106 µM and 49-117 µM and CHL was 1.4-5.8 mg/m3 and 1.3-9.4 mg/m3. TURB was between 44 and 240 NTU in November; the maximun value were obseved in the central zone. Steep K20 gradients were found near both coast. The reduced organic carbon load into the lower and external part of the "Río de la Plata" River was estimated. (Document contains 40 pages.)

Introducción de peces exóticos en la República Argentina

A review and analysis of the exotic fish distribution and introduction is made using bibliographic information. Both lentic and lotic environments were considered. In order to classify the state of the populations, different categories were defined as follow: permanent, probably permanent, reported and unknown. Results show that 15 species were attempted to be introduced from 1904. Only 8 of them arose an successfull aclimatization: raimbow trout, brown trout, lake trout, landlocked salmon, carp, goldfish, and mosquitofish. For the salmonids, ecological features were analized, in order to explain the disappearence or the permanence in some regions. (Document contains 90 pages)