Effect of temperature on slumping behaviour of lead-free solder paste and its rheological simulation

Variation in temperature can have a significant impact on the rheological characterisation of solder pastes used in the electronic assembly of surface mount devices. This paper concerns the study of the effect of temperature on slumping characteristics of lead-free solder pastes. The identification of the slumping characteristics can help in the correlation of the pastes characteristics to its printing performance. Further issues, which aid in justifying the undertaking of such a study, include the temperature differences identified both at the squeegee during the print, and during reflow. Due to these temperature variations, it is imperative to understand how slump differs with a temperature gradient

Development of an in-situ, non-destructive ultrasonic monitoring technique for solder pastes

This paper concerns the use of a non-destructive ultrasonic technique for characterising the rheological properties of solder paste and specifically, the use of through-mode microsecond ultrasonic pulses for evaluation of viscoelastic properties of paste materials at the molecular level. Ultrasonic techniques are a widely used and a reliable form of non-destructive testing of materials. This is because techniques such as ultrasounds while used for testing or monitoring material properties, has offered immense benefits in applications where access to the sample is restricted or when handling the sample for testing could interfere with the monitoring or analysis process. Very often, this would mean that the measurements taken are not a true representation of the behaviour of the material (due to externally incorporated changes into the material's physical state during the removal or testing process). Ultrasonic based techniques are being increasingly used for quality control and production monitoring functions which requires evaluation of the changes in material properties over wide range of industrial applications such as cement paste quality, plastic/polymer extrusion process, dough, and even sugar content in beverage drinks. In addition, ultrasound techniques are of great interest for their capacity to take rapid measurements in systems which are optically opaque. The viscometer and rheometer are two of the most widely used rheological instruments used in industry for monitoring the quality of solder pastes, during the production and packaging stage. One of the potential limitations of viscometer and rheometer based measurements is that the collection and preparation of the solder paste samples can irreversibly alter the structure and flow behaviour of the sample. Hence the measurement may not represent the actual quality of the whole production batch. Secondly, rheological measurements and the interpretation of rheological data is a very technical and time consuming process, which requires professionally trained R&D personnel. It is for these reasons that materials suppliers (who formulate and produce solder pastes) and solder paste consumers (especially, contract electronics manufacturers) are keen to see the development of simple, easy to use and accurate techniques for the theological characterisation of solder pastes. The results from the work show that the technique can be used by R&D personnel involved in paste formulation and manufacture to monitor the batch-to-batch quality and consistency.

3D Analysis of Heat Transfer Intensification by Re-Entrance Flow Pin-Fins Microstructures with a Highly Thermal-Conductive Plate

Joule heat-induced hot-spot formation sets severe limits in the operation of continuous annular electrochromatography (CAEC), a new concept for preparative separation as an analog to analytical capillary electrochromatography (CEC). This may lead to eluent flow perturbance, even to boiling, which would massively weaken separation efficiency and may even hamper the stationary phase used for separation. For reasons of system integration and high-efficiency heat transfer, micro flow heat exchangers are considered with a separate coolant flow. A 3D numerical analysis of the heat transfer of water single-phase laminar flow in a square microchannel and different arrays of micro pin-fins was carried out using COMSOL Multiphysics. Several advanced materials with low electric conductivity and at the same time with high heat conductivity were put forward to be used in the CAEC system. As essential design point, it is proposed to constitute the micro heat exchanger from two different parts of the CAEC system, namely a microstructured pin-fins plate and a so-called conductive plate.

A shared care model pilot for palliative home care in a rural area:Impact on symptoms, distress, and place of death

Context: Shared care models integrating family physician services with interdisciplinary palliative care specialist teams are critical to improve access to quality palliative home care and address multiple domains of end-of-life issues and needs. Objectives: To examine the impact of a shared care pilot program on the primary outcomes of symptom severity and emotional distress (patient and family separately) over time and, secondarily, the concordance between patient preferences and place of death. Methods: An inception cohort of patients (n = 95) with advanced, progressive disease, expected to die within six months, were recruited from three rural family physician group practices (21 physicians) and followed prospectively until death or pilot end. Serial measurement of symptoms, emotional distress (patient and family), and preferences for place of death was performed, with analysis of changes in distress outcomes assessed using t-tests and general linear models. Results: Symptoms trended toward improvement, with a significant reduction in anxiety from baseline to 14 days noted. Symptom and emotional distress were maintained below high severity (7-10), and a high rate of home death compared with population norms was observed. Conclusion: Future controlled studies are needed to examine outcomes for shared care models with comparison groups. Shared care models build on family physician capacity and as such are promising in the development of palliative home care programs to improve access to quality palliative home care and foster health system integration. © 2011 U.S. Cancer Pain Relief Committee. Published by Elsevier Inc. All rights reserved.

Three-port DC-DC Converter for Stand-Alone Photovoltaic Systems

System efficiency and cost effectiveness are of critical importance for photovoltaic (PV) systems. This paper addresses the two issues by developing a novel three-port DC-DC converter for stand-alone PV systems, based on an improved Flyback-Forward topology. It provides a compact single-unit solution with a combined feature of optimized maximum power point tracking (MPPT), high step-up ratio, galvanic isolation and multiple operating modes for domestic and aerospace applications. A theoretical analysis is conducted to analyze the operating modes followed by simulation and experimental work. The paper is focused on a comprehensive modulation strategy utilizing both PWM and phase-shifted control that satisfies the requirement of PV power systems to achieve MPPT and output voltage regulation. A 250 W converter was designed and prototyped to provide experimental verification in term of system integration and high conversion efficiency.

A compositional scheduling framework for digital avionics systems

ARINC specification 653-2 describes the interface between application software and underlying middleware in a distributed real-time avionics system. The real-time workload in this system comprises of partitions, where each partition consists of one or more processes. Processes incur blocking and preemption overheads and can communicate with other processes in the system. In this work we develop compositional techniques for automated scheduling of such partitions and processes. At present, system designers manually schedule partitions based on interactions they have with the partition vendors. This approach is not only time consuming, but can also result in under utilization of resources. In contrast, the technique proposed in this paper is a principled approach for scheduling ARINC-653 partitions and therefore should facilitate system integration.

Hardware development of the Yorick series of active vision systems

This paper presents a review of the design and development of the Yorick series of active stereo camera platforms and their integration into real-time closed loop active vision systems, whose applications span surveillance, navigation of autonomously guided vehicles (AGVs), and inspection tasks for teleoperation, including immersive visual telepresence. The mechatronic approach adopted for the design of the first system, including head/eye platform, local controller, vision engine, gaze controller and system integration, proved to be very successful. The design team comprised researchers with experience in parallel computing, robot control, mechanical design and machine vision. The success of the project has generated sufficient interest to sanction a number of revisions of the original head design, including the design of a lightweight compact head for use on a robot arm, and the further development of a robot head to look specifically at increasing visual resolution for visual telepresence. The controller and vision processing engines have also been upgraded, to include the control of robot heads on mobile platforms and control of vergence through tracking of an operator's eye movement. This paper details the hardware development of the different active vision/telepresence systems.

Measuring significant variability characteristics: An assessment of three UK renewables

The variability of renewable energy is widely recognised as a challenge for integrating high levels of renewable generation into electricity systems. However, to explore its implications effectively, variability itself should first be clearly understood. This is particularly true for national electricity systems with high planned penetration of renewables and limited interconnection such as the UK. Variability cannot be considered as a distinct resource property with a single measurable parameter, but is a multi-faceted concept best described by a range of distinct characteristics. This paper identifies relevant characteristics of variability, and considers their implications for energy research. This is done through analysis of wind, solar and tidal current resources, with a primary focus on the Bristol Channel region in the UK. The relationship with electricity demand is considered, alongside the potential benefits of resource diversity. Analysis is presented in terms of persistence, distribution, frequency and correlation between supply and demand. Marked differences are seen between the behaviours of the individual resources, and these give rise to a range of different implications for system integration. Wind shows strong persistence and a useful seasonal pattern, but also a high spread in energy levels at timescales beyond one or two days. The solar resource is most closely correlated with electricity demand, but is undermined by night-time zero values and an even greater spread of monthly energy delivered than wind. In contrast, the tidal resource exhibits very low persistence, but also much greater consistency in energy values assessed across monthly time scales. Whilst this paper focuses primarily on the behaviour of resources, it is noted that discrete variability characteristics can be related to different system impacts. Persistence and predictability are relevant for system balancing, whereas statistical distribution is more relevant when exploring issues of asset utilisation and energy curtailment. Areas of further research are also identified, including the need to assess the value of predictability in relation to other characteristics.

Proposal of redundant drive wire mechanism for producing motions with high acceleration and high precision

A new wire mechanism called Redundant Drive Wire Mechanism (RDWM) is proposed. The purpose of this paper is to build up the theory of a RDWM with fast motion and fine motion. First, the basic concepts of the proposed mechanism is presented. Second, the vector closure condition for the proposed mechanism is developed. Next, we present the basic equations, propose the basic structure of RDWM with the Internal DOF module, Double Actuation Modules and Precision Modules together with the properties of the mechanism. Finally, we conduct the simulation to show the validity of the RDWM.

Customer-focused CRM: a marketing challenge for organizations

The article explains that CRM is all about building longterm business relationships with customers. It is best described as the blending of internal business processes: sales, marketing and customer support with technology. Research indicates that poor project planning, weak and
incomplete business cases, cost and complexity of the technology, lack of.technological skills, lack of system integration and lack of senior management involvement in the CRM process are among the many factors that inhibit the successful adoption ofCRM in companies. The article presents a framework for customer centric CRM.

Impact of electronic data interchange in the Australian automotive industry

Information technology continues to play an increasingly significant role in the development of firms competing in the vast array of markets from those classified as global markets, such as the automotive industry, to the smaller nationally-based markets such as retailing. An objective of electronic commerce is to assist organisations to remain competitive and gain entry to markets which were previously unattainable. This study focuses on the organisational impact of one form of electronic commerce (electronic data interchange) on the component sector of the Australian automotive industry and examines the extent to which trading partner relationships have been affected. The research investigates the extent to which the integration of electronic data interchange (EDI) with an organisation’s internal application system may facilitate specific net benefits. The automotive industry became the first Australian industry to cooperatively adopt EDI. Research to date has not adequately examined the organisational impact of the nature and extent of net benefits gained from EDI adoption. To achieve the objective of assessing EDI net benefits, a conceptual model was developed. The model proposed that the level of EDI net benefits expected is influenced by the size of the organisation and the concentration of trade achieved within the industry via intervening links through (a) the level of senior management commitment and (b) the extent of system integration. Nine empirically testable research propositions are derived from the model, each testing the relationship between model constructs. Data was collected from 114 component suppliers to Ford Australia in 1992 and 1994 using a repeated cross-sectional longitudinal design. Structural equation modelling using partial least squares was adopted in the analysis of the data. A pure longitudinal model together with 12 case studies of selected component manufacturers supplemented the research design. The results of the research showed that the proposed conceptual model is a good description of the data. In particular, net benefits obtained from EDI adoption are directly determined by the size of the organisation, and the extent to which firms integrate EDI into their internal application systems. The level of net benefits is only indirectly influenced by the level of senior management commitment to the EDI project through (a) management commitment’s direct effect on integration, and (b) the direct effect the volume of trade a supplier achieves with the automotive industry on senior management commitment and system integration. The major benefits organisations experienced from EDI were enhanced productivity, clerical staff savings, improved data accuracy, enhanced customer service and reduced administration costs. The research showed that few suppliers gained inventory savings from EDI, a frequently claimed benefit from EDI adoption. Evidence of small improvements in product quality emerged from the results. In summary, this research attempts to make two primary contributions to knowledge, first in providing a method by which net benefits from electronic commerce can be measured within an industry adopting electronic trading, and second, by providing organisations with the knowledge of the specific net benefits organisations could expect from EDI adoption, together with the four major factors affecting these benefits. The research concludes with possible directions for future research, in particular an assessment of the impact of incorporating financial EDI into electronic trading.

Constitutionalism and beyond the dispute between the left and right

From the constitutional point of view, all ideology in a pluralistic society structures have their own status and function. The rise of China needs a healthy, diverse and balanced thinking the situation. We need a capacity of macro-narrative and a framework to develop a macro perspective, the various ideologies put this macro, the constitutional system integration. This article is about ideology than an example, the analysis and comparison of three models. The first mode is now at in the formation and development process, and our political system to adapt to the "balanced" mode. The second model is adopted, representing the "left" "right" interest groups to reach beyond the ruling party turns around, balance of interests purpose. The third is in the process of policy formulation and selection of multi-party consultation and inclusive pattern of results of various think tanks.

HealthPathways: creating a pathway for health systems reform

Inefficiencies in the co-ordination and integration of primary and secondary care services in Australia, have led to increases in waiting times, unnecessary presentations to emergency departments and issues around poor discharge of patients. HealthPathways is a program developed in Canterbury, New Zealand, that builds relationships between General Practitioners and Specialists and uses information technology so that efficiency is maximised and the right patient is given the right care at the right time. Healthpathways is being implemented by a number of Medicare Locals across Australia however, little is known about the impact HealthPathways may have in Australia. This article provides a short description of HealthPathways and considers what it may offer in the Australian context and some of the barriers and facilitators to implementation. What is known about the topic? Early evidence on HealthPathways suggests that the program does seem to be strengthening relationships between GPs and secondary care specialists. In New Zealand advances in efficiency and system integration have been noted. However, there is limited evidence on the effectiveness of HealthPathways in Australia. What does this paper add? It is one of the first published papers to provide a perspective around HealthPathways and draws existing evidence and research to explore some of the barriers and facilitators to the development and implementation of HealthPathways in Australia. What are the implications for practitioners'? Early evidence suggests HealthPathways could help GPs and other practitioners' in the delivery of health services, it could also help to strengthen practitioner relationships.

Diretrizes para implantação de sistemas de segurança e saúde do trabalho em empresas produtoras de baterias automotivas

O desenvolvimento de Sistemas de Gestão da Segurança e Saúde no Trabalho (SGSST) ganha um significado cada vez mais importante no desempenho das empresas, pois, por meio deles, é possível obter a promoção da saúde e satisfação dos trabalhadores e a redução dos riscos de acidentes. No entanto, para que um SGSST obtenha bons resultados, as empresas precisam estar atentas às dificuldades comumente encontradas durante o seu processo de implantação, procurando solucioná-las de maneira antecipada e estruturada. Pelo exposto, este trabalho tem como principal objetivo apresentar diretrizes, baseadas no referencial teórico e nos resultados dos estudos de caso realizados, para implantação de SGSSTs em empresas fabricantes de baterias automotivas. Para o seu desenvolvimento adotou-se o método de pesquisa qualitativa a partir da realização de dois estudos de caso em empresas fabricantes de baterias automotivas localizadas na cidade de Bauru. Os instrumentos de coleta de dados foram entrevistas semiestruturadas, análise de documentos e observação in loco. Ao final do artigo, são propostas diretrizes relacionadas aos seguintes elementos: alta direção, estratégia organizacional, cultura organizacional, departamento de Segurança e Saúde do Trabalho (SST), técnicos de SST, recursos humanos, treinamento, equipes multidisciplinares, comunicação interna, resistência à mudança, indicadores de desempenho, ferramentas gerenciais para solução de problemas de SST, gestão de projetos, recompensas e incentivos, e integração do sistema.