Sustainable urban development to 2050: complex transitions in the built environment of cities

The majority of the world’s population now live in cities. This poses great challenges, but also great opportunities in terms of tackling climate change, resource depletion and environmental degradation. Policy agendas have increasingly focused on how to develop and maintain ‘integrated sustainable urban development’, and a number of theoretical conceptualisations of urban transition have been formulated to help our thinking and understanding in both developed and developing countries. Drawing on examples around the world the paper aims to examine the key ‘critical success factors’ that need to be in place for cities to traverse a pathway to a more sustainable future in urban development terms by 2050. The paper explores how important the issues of ‘scale’ is in the context of complexity and fragmentation in the city’s built environment, identifies the lessons that can be learned for future sustainable urban development, and the further research which is needed to address future urban transitions to 2050.

Greater Amman: metropolitan growth and scenarios for sustainable urban development

This paper reviews the development of Greater Amman, Jordan noting that the vast urban expansion that has occurred over the last fifty years has led to the desertification of rare fertile lands, following the fragmented and scattered territorial expansion of the city. The future scenario for planning in Greater Amman is analyzed in respect of proposals outlined in the Metropolitan Growth Plan of 2008, which assumes a rapid population growth from 2,200,000 persons in 2006, to approximately 6,500,000 by 2025. The concentration of more than 39 per cent of the national population of Jordan in Greater Amman threatens the transformation of former distinct settlement pattern into a distinctive continuous urban zone, aggravating problems of infrastructural provision, water needs, agricultural lands, and leaving unresolved problems of land inflation, poor urban standards and housing shortages. In conclusion, the environmental implications of the Amman Metropolitan Growth Plan are analysed, and it is suggested that an alternative approach is needed, based on clear principles of sustainable urban development.

Conceptual Product Development in Small Corporations

The main objective of the thesis “Conceptual Product Development in Small Corporations” is by the use of a case study test the MFD™-method (Erixon G. , 1998) combined with PMM in a product development project. (Henceforth called MFD™/PMM-method). The MFD™/PMM-method used for documenting and controlling a product development project has since it was introduced been used in several industries and projects. The method has been proved to be a good way of working with the early stages of product development, however, there are almost only projects carried out on large industries which means that there are very few references to how the MFD™/PMM-method works in a small corporation. Therefore, was the case study in the thesis “Conceptual Product Development in Small Corporations” carried out in a small corporation to find out whether the MFD™/PMM-method also can be applied and used in such a corporation.The PMM was proposed in a paper presented at Delft University of Technology in Holland 1998 by the author and Gunnar Erixon. (See appended paper C: The chart of modular function deployment.) The title “The chart of modular function deployment” was later renamed as PMM, Product Management Map. (Sweden PreCAD AB, 2000). The PMM consists of a QFD-matrix linked to MIM (Module Indication Matrix) via a coupling matrix which makes it possible to make an unbroken chain from the customer domain to the designed product/modules. The PMM makes it easy to correct omissions made in creating new products and modules.In the thesis “Conceptual Product Development in Small Corporations” the universal MFD™/PMM-method has been adapted by the author to three models of product development; original-, evolutionary- and incremental development.The evolutionary adapted MFD™/PMM-method was tested as a case study at Atlings AB in the community Ockelbo. Atlings AB is a small corporation with a total number of 50 employees and an annual turnover of 9 million €. The product studied at the corporation was a steady rest for supporting long shafts in turning. The project team consisted of management director, a sales promoter, a production engineer, a design engineer and a workshop technician, the author as team leader and a colleague from Dalarna University as discussion partner. The project team has had six meetings.The project team managed to use MFD™ and to make a complete PMM of the studied product. There were no real problems occurring in the project work, on the contrary the team members worked very well in the group, having ideas how to improve the product. Instead, the challenge for a small company is how to work with the MFD™/PMM-method in the long run! If the MFD™/PMM-method is to be a useful tool for the company it needs to be used continuously and that requires financial and personnel resources. One way for the company to overcome the probable lack of recourses regarding capital and personnel is to establish a good cooperation with a regional university or a development centre.

Integrated Product Development in Truck Industry - A Case Study on Product Development Processes

This paper presents the result from a case study at Scania on product development processes. The objective with the case study was to gather information on Scania’s product development process (PDP) including the use of CAD and simulation tools, and project work. The objective was also to find any deviations or different interpretations among the employees on the PDP. To gather the information, semi-structured tape-recorded interviews have been used to ensure that individual interpretations from the interviewees could be gathered. Scania uses a defined and structured PDP which facilitates concurrent and cross-functional work. The PDP is implemented and followed to various degrees. The newly employed personnel may have difficulties with communication, both to find and to give information. Although, newly graduated personnel may find it easier to adapt to changes, and also to use a structured process which they have studied at universities. It was also known during the case study that the PDP is a major support for the newly employed personnel, which in turn decreases the time to get into the same working process as the more experienced personnel. Employees with decades of experience know the right sources from which to both give and gather information. Also, the terminology and definitions in the product development process may not be used as intended. This makes it difficult for other project members or teams who need to interpret the information received. At the same time, the routines among the more experienced personnel, which have been set-up throughout the years, make them more inflexible in adapting changes. The findings in the case study as well as challenges with implementing the PDP are known to Scania and are a part of the continuing work with improvement.

A framework for ICT-based knowledge sharing in sustainable rural development : the case of Gilgit-Baltistan, Pakistan

Some 50% of the people in the world live in rural areas, often under harsh conditions and in poverty. The need for knowledge of how to improve living conditions is well documented. In response to this need, new knowledge of how to improve living conditions in rural areas and elsewhere is continuously being developed by researchers and practitioners around the world. People in rural areas, in particular, would certainly benefit from being able to share relevant knowledge with each other, as well as with stakeholders (e.g. researchers) and other organizations (e.g. NGOs). Central to knowledge management is the idea of knowledge sharing. This study is based on the assumption that knowledge management can support sustainable development in rural and remote regions. It aims to present a framework for knowledge management in sustainable rural development, and an inventory of existing frameworks for that. The study is interpretive, with interviews as the primary source for the inventory of stakeholders, knowledge categories and Information and Communications Technology (ICT) infrastructure. For the inventory of frameworks, a literature study was carried out. The result is a categorization of the stakeholders who act as producers and beneficiaries of explicit and indigenous development knowledge. Stakeholders are local government, local population, academia, NGOs, civil society and donor agencies. Furthermore, the study presents a categorization of the development knowledge produced by the stakeholders together with specifications for the existing ICT infrastructure. Rural development categories found are research, funding, agriculture, ICT, gender, institutional development, local infrastructure development, and marketing & enterprise. Finally, a compiled framework is presented, and it is based on ten existing frameworks for rural development that were found in the literature study, and the empirical findings of the Gilgit-Baltistan case. Our proposed framework is divided in four levels where level one consists of the identified stakeholders, level two consists of rural development categories, level three of the knowledge management system and level four of sustainable rural development based on the levels below. In the proposed framework we claim that the sustainability of rural development can be achieved through a knowledge society in which knowledge of the rural development process is shared among all relevant stakeholders.

The influence of the supply chain agents on the new product development's performance: an analysis based on the multi-group moderation

Este estudo buscou verificar a influencia dos agentes da cadeia de suprimentos no desempenho do desenvolvimento de novos produtos quando os agentes são analisados em conjunto. A motivação desta pesquisa veio de estudos que alertaram para a consideração da integração da cadeia de suprimentos como um constructo multidimensional, englobando o envolvimento da manufatura, fornecedores e clientes no desenvolvimento de novos produtos; e devido à falta de informação sobre as influencias individuais destes agentes no desenvolvimento de novos produtos. Sob essas considerações, buscou-se construir um modelo analítico baseado na Teoria do Capital Social e Capacidade Absortiva, construir hipóteses a partir da revisão da literatura e conectar constructos como cooperação, envolvimento do fornecedor no desenvolvimento de novos produtos (DNP), envolvimento do cliente no DNP, envolvimento da manufatura no DNP, antecipação de novas tecnologias, melhoria contínua, desempenho operacional do DNP, desempenho de mercado do NPD e desempenho de negócio do DNP. Para testar as hipóteses foram consideradas três variáveis moderadoras, tais como turbulência ambiental (baixa, média e alta), indústria (eletrônicos, maquinários e equipamentos de transporte) e localização (América, Europa e Ásia). Para testar o modelo foram usados dados do projeto High Performance Manufacturing que contém 339 empresas das indústrias de eletrônicos, maquinários e equipamentos de transporte, localizadas em onze países. As hipóteses foram testadas por meio da Análise Fatorial Confirmatória (AFC) incluindo a moderação muti-grupo para as três variáveis moderadoras mencionadas anteriormente. Os principais resultados apontaram que as hipóteses relacionadas com cooperação foram confirmadas em ambientes de média turbulência, enquanto as hipóteses relacionadas ao desempenho no DNP foram confirmadas em ambientes de baixa turbulência ambiental e em países asiáticos. Adicionalmente, sob as mesmas condições, fornecedores, clientes e manufatura influenciam diferentemente no desempenho de novos produtos. Assim, o envolvimento de fornecedores influencia diretamente no desempenho operacional e indiretamente no desempenho de mercado e de negócio em baixos níveis de turbulência ambiental, na indústria de equipamentos de transporte em países da Americanos e Europeus. De igual forma, o envolvimento do cliente influenciou diretamente no desempenho operacional e indiretamente no desempenho de mercado e do negócio em médio nível de turbulência ambiental, na indústria de maquinários e em países Asiáticos. Fornecedores e clientes não influenciam diretamente no desempenho de mercado e do negócio e não influenciam indiretamente no desempenho operacional. O envolvimento da manufatura não influenciou nenhum tipo de desempenho do desenvolvimento de novos produtos em todos os cenários testados.

Product development process: Using real options for assessments and to support the decision-making at decision gates

Enterprises need continuous product development activities to remain competitive in the marketplace. Their product development process (PDP) must manage stakeholders' needs - technical, financial, legal, and environmental aspects, customer requirements, Corporate strategy, etc. -, being a multidisciplinary and strategic issue. An approach to use real option to support the decision-making process at PDP phases in taken. The real option valuation method is often presented as an alternative to the conventional net present value (NPV) approach. It is based on the same principals of financial options: the right to buy or sell financial values (mostly stocks) at a predetermined price, with no obligation to do so. In PDP, a multi-period approach that takes into account the flexibility of, for instance, being able to postpone prototyping and design decisions, waiting for more information about technologies, customer acceptance, funding, etc. In the present article, the state of the art of real options theory is prospected and a model to use the real options in PDP is proposed, so that financial aspects can be properly considered at each project phase of the product development. Conclusion is that such model can provide more robustness to the decisions processes within PDP.

Analytic hierarchy prioritisation of new product development activities for electronics manufacturing

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Regional environmental policy and sustainable tourism development in the Caribbean

Includes bibliography

Integration in new product development: Case study in a large Brazilian high-technology company

Proficiency in management activities undertaken in product development processes is regarded as a key competitive advantage for companies, particularly for high-tech industrial firms, which benefit from the important competitiveness factor of launching products with a differentiated technological content. This paper's objective was to identify, through case study, practices for integration between the roles of R & D with others involved in product development in a large Brazilian company of industrial automation. The results suggest some management practices to improve the integration in new products development, such as the use of employees from marketing with knowledge and experience previously gained from R & D activities and uses the heavyweight product manager to solve synchronization problems between product and technology development. © Universidad Alberto Hurtado, Facultad de Economía y Negocios.

Report of the high-level ministerial dialogue: social security and sustainable social development in the Caribbean

Includes bibliography

Evaluation of maturity levels in the management of product development: case studies in the capital goods industry

In recent approaches to the management of product development process (PDP), maturity levels have attracted the attention of practitioners and researchers. The CMMI model contributes to evaluate the maturity levels and improvement of the product development process management. This paper, based on CMMI model, analyzes the practices adopted in two companies of the capital goods industry, which develop and manufacture equipment upon request. It was observed that on account of market conditioning factors and different practices adapted to PDP management, these companies are at different maturity levels. One company is at the initial level of maturity while the other at the most advanced one. It was also noted that the application of CMMI model can provide improvement to PDP management, as well as present guidelines to achieve higher maturity levels, adequate to companies' needs.