LED lighting design strategies to enhance window appearance and increase energy savings in daylit office spaces

Vertical windows are the most common and simplest method to introduce daylight to interior spaces of office buildings, while also providing a view and connection to the outside. However, high contrast ratios between windows and surrounding surfaces can cause visual discomfort for occupants and can negatively influence their health and productivity. Consequently, building occupants may try to adapt their working environment through closing blinds and turning on lights in order to improve indoor visual comfort. Such interventions defeat the purpose of daylight harvesting systems and can increase the forecast electric lighting consumption in buildings that include such systems. A simple strategy to prevent these problematic consequences is to reduce the luminance contrasts presented by the window wall by increasing the luminance of areas surrounding the window through the sparing use of energy-efficient supplementary lighting, such light emitting diodes (LEDs). This paper presents the result of a pilot study in typical office in Brisbane, Australia that tests the effectiveness of a supplementary LED lighting system. The study shows an improvement in the appraisal of the visual environment is achieved using the supplementary system, along with up to 88% reductions in luminance contrast at the window wall. Also observed is a 36% reduction in the likelihood of user interventions that would increase energy usage. These results are used as the basis of an annual energy simulation of the test office and indicate that supplementary systems could be used to save energy beyond what is typically realised in side lit office spaces.

Integrating LED lighting design strategies with side daylighting systems to improve interior lighting design of office buildings

A high contrast ratio between windows and surrounding walls may lead to office workers visual discomfort that could negatively affect their satisfaction and productivity. Consequently, occupants may try to adapt their working environment by closing blinds and/ or turning on the lights to enhance indoor visual comfort, which can reduce predicted energy savings. The hypothesis of this study is that reducing luminance contrast ratio on the window wall will improve window appearance which potentially will reduce visual discomfort and decrease workers interventions. Thus, this PhD research proposes a simple strategy to diminish the luminance contrast on the window wall by increasing the luminance of the areas surrounding the windows using supplementary light emitting diode (LED) systems. To test the hypothesis, this investigation will involve three experiments in different office layouts with various window types and orientations in Brisbane, Australia. It will assess user preferences for different luminance patterns in windowed offices featuring flexible, lowpower LED lighting installations that allows multiple lighting design options on the window wall. Detailed luminance and illuminance measures will be used to match quantitative lighting design assessment to user preferences.

Preservice early childhood teachers and designers partnering for change at The Lone Pine Koala Sanctuary: An interdisciplinary education and design for sustainability project

This presentation discusses and critiques a current case study of a project in which Early Childhood preservice teachers are working in partnership with Design students to develop principles and concepts for the design and construction of an early childhood centre. This centre, to be built on the grounds of the iconic Lone Pine Koala Sanctuary in Brisbane , focuses on Education for Sustainability (EfS), sustainable design and sustainable business. Interdisciplinary initiatives between QUT staff and students from two Faculties (Education and Creative Industries) have been situated in the real –world context of this project. This practical, authentic project has seen stakeholders take an interdisciplinary approach to sustainability, opening up new ways of thinking about early childhood centre design, particularly with respect to operation and function. Interdisciplinarity and a commitment to genuine partnerships have created intellectual spaces to re-think the potential of the disciplines to be interwoven so that future professionals from different fields might come together to learn from each other and to address the sustainability imperative. The case study documents and explores the possibilities that the Lone Pine project offers for academics and students from Early Childhood and Design to collaboratively inform the Sanctuary’s vision for the Centre. The research examines how students benefit from practical, real world, community-integrated learning; how academic staff across two disciplines are able to work collaboratively within a real-world context; and how external stakeholders experience and benefit from the partnership with university staff and students. Data were collected via a series of focus group and individual interviews designed to explore how the various stakeholders (staff, students, business partners) experienced their involvement in the interdisciplinary project. Inductive and deductive thematic analysis of these data suggest many benefits for participants as well as a number of challenges. Findings suggest that the project has provided students with ‘real world’ partnerships that reposition early childhood students’ identities from ‘novice’ to ‘professional’, where their knowledge, expertise and perspectives are simultaneously validated and challenged in their work with designers. These partnerships are enabling preservice teachers to practice a new model of early childhood leadership in sustainability, one that is vital for leading for change in an increasingly complex world. This presentation celebrates, critiques and problematises this project, exploring wider implications for other contexts in which university staff and students may seek to work across traditional boundaries, thus building partnerships for change.

Pre-service early childhood teachers and designers partnering for change at The Lone Pine Koala Sanctuary: An interdisciplinary education and design for sustainability project

This presentation discusses and critiques a current case study of a project in which Early Childhood preservice teachers are working in partnership with Design students to develop principles and concepts for the design and construction of an early childhood centre. This centre, to be built on the grounds of the iconic Lone Pine Koala Sanctuary in Brisbane , focuses on Education for Sustainability (EfS), sustainable design and sustainable business. Interdisciplinary initiatives between QUT staff and students from two Faculties (Education and Creative Industries) have been situated in the real –world context of this project. This practical, authentic project has seen stakeholders take an interdisciplinary approach to sustainability, opening up new ways of thinking about early childhood centre design, particularly with respect to operation and function. Interdisciplinarity and a commitment to genuine partnerships have created intellectual spaces to re-think the potential of the disciplines to be interwoven so that future professionals from different fields might come together to learn from each other and to address the sustainability imperative. The case study documents and explores the possibilities that the Lone Pine project offers for academics and students from Early Childhood and Design to collaboratively inform the Sanctuary’s vision for the Centre. The research examines how students benefit from practical, real world, community-integrated learning; how academic staff across two disciplines are able to work collaboratively within a real-world context; and how external stakeholders experience and benefit from the partnership with university staff and students. Data were collected via a series of focus group and individual interviews designed to explore how the various stakeholders (staff, students, business partners) experienced their involvement in the interdisciplinary project. Inductive and deductive thematic analysis of these data suggest many benefits for participants as well as a number of challenges. Findings suggest that the project has provided students with ‘real world’ partnerships that reposition early childhood students’ identities from ‘novice’ to ‘professional’, where their knowledge, expertise and perspectives are simultaneously validated and challenged in their work with designers. These partnerships are enabling preservice teachers to practice a new model of early childhood leadership in sustainability, one that is vital for leading for change in an increasingly complex world. This presentation celebrates, critiques and problematises this project, exploring wider implications for other contexts in which university staff and students may seek to work across traditional boundaries, thus building partnerships for change.

The Perception of Light: Understanding Architectural Lighting Design

Light is essential to life and vision; without light, nothing exists. It plays a pivotal role in the world of architectural design and is used to generate all manner of perceptions that enhance the designed environment experience. But what are the fundamental elements that designers rely upon to generate light enhanced experiences? How are people’s perceptions influenced by designed light schemas? In this book Dr. Marisha McAuliffe highlights the relationship that exists between light source and surface and how both create quality of effect in the built environment. Concepts relating to architectural lighting design history, theories, research, and generation of lighting design schemes to create optimal experiences in architecture, interior architecture and design are all explored in detail. This book is essential reading for both the student and the professional working in architectural lighting, particularly in terms of qualitative perception oriented lighting design

Colagens têxteis: em busca de um design sustentável

Os desafios dos designers nos dias de hoje são inúmeros, sendo um deles o de desenvolver produtos que atendam ao mercado sem deixar de lado as preocupações com a sustentabilidade, seja ambiental, sócio-ética ou econômica. Assim sendo, a própria disputa para alcançar novos patamares de destaque no mercado também fez proliferar novas tecnologias de produção sustentável como um fator diferenciador nos dias de hoje que, para além de preservar a natureza, conquista uma larga faixa de clientes sensíveis a este tipo de preocupações. É objetivo deste trabalho a criação de produtos de design de moda e decoração e sua verificação enquanto design sustentável. Neste contexto, enquadra-se este trabalho que visa desenvolver produtos de moda e decoração realizados com a técnica da colagem têxtil, resultando assim, em produtos inovadores, únicos, intemporais e com design. A presente investigação desenvolveu-se em parceria com o Banco de Vestuário de Caxias do Sul, que forneceu dados para o estudo do setor têxtil e levantamento dos resíduos da indústria têxtil da região para caracterização do setor, além de disponibilizar os resíduos têxteis que serviram de base para a criação de produtos de moda e de decoração mais sustentáveis. Para a criação das superfícies têxteis coladas foram desenvolvidas amostras com testes de temperaturas e tempos para verificar a combinação que mais se adequa a cada tipo de matéria-prima. Além de fazer uso destes resíduos, a investigação contou com o auxílio de mão-de-obra de artesãs que, por sua vez, foram capacitadas com a técnica da colagem têxtil através de dois workshops. Após esta etapa, para fazer a análise dos níveis de sustentabilidade dos produtos, utilizou-se o Sustainability Design Orienting Toolkit (SDO) que é um conjunto de ferramentas que visa a orientação dos designers no desenvolvimento de produtos em termos de sustentabilidade ambiental, sócio-ética e econômica.

Sustainability = Good Design

Sustainable design is fundamentally a subset of good design.The description of good design will eventually include criteria for the creation of a healthy environment and energy efficiency. These goals will be achieved by an emergent paradigm of design practice:integration.At every level design interests will come together to facilitate common goals for the creation of a rewarding present and a healthy future. Interdisciplinary design teams will flourish. Inter-accommodating and fluidly communicating political structures will grow. Coalescing social values and economic forces will propel integrated strategies. Unique and innovative solutions will increasingly become the objective. One eventual outcome of this integrated or sustainable design practice will be the development of buildings that produce more energy than they consume.

L’influence du développement durable à travers la formation universitaire en design industriel

Aujourd’hui, nous savons qu’environ 75 à 80% des impacts environnementaux des produits sont déterminés lors de la conception. Le rôle du designer industriel est donc crucial pour arriver à une forme de développement plus viable. Cette recherche tente de cibler les champs de connaissances qui devraient faire partie de la formation des professionnels du développement de produits pour y intégrer les aspects environnementaux. Après une recension de la littérature en design industriel, en pédagogie et en environnement, l’étude de terrain a été conduite en deux temps. Selon des critères prédéfinis, des programmes universitaires « spécialisés » en environnement/développement durable, au Québec, ainsi que des formations en éco-conception, offerts en France, ont été analysés. L’étude de terrain a été complétée par un entretien en profondeur semi-dirigé avec un consultant, qui aide des entreprises québécoises à intégrer l’environnement en développement de produits. L’analyse des informations recueillies met en évidence la nécessité de transformer rapidement les formations universitaires en conception de produits. Le nouveau cursus de design industriel devrait; 1. Intégrer les connaissances relatives aux impacts environnementaux; 2. Encourager le travail en équipes multidisciplinaires pour enrichir la collecte d’informations relative aux projets de développement; 3. Établir une collaboration étroite entre les établissements d’enseignement et les industries, ce qui est essentiel à la compréhension des enjeux de développement de produits et services (culture de l’entreprise, coût, délais, logistique, réglementation, etc.).

Design thinking and the precautionary principle : development of a theoretical model complementing preventive judgment for design for sustainability enriched through a study of architectural competitions adopting LEED

Cette thèse contribue à une théorie générale de la conception du projet. S’inscrivant dans une demande marquée par les enjeux du développement durable, l’objectif principal de cette recherche est la contribution d’un modèle théorique de la conception permettant de mieux situer l’utilisation des outils et des normes d’évaluation de la durabilité d’un projet. Les principes fondamentaux de ces instruments normatifs sont analysés selon quatre dimensions : ontologique, méthodologique, épistémologique et téléologique. Les indicateurs de certains effets contre-productifs reliés, en particulier, à la mise en compte de ces normes confirment la nécessité d’une théorie du jugement qualitatif. Notre hypothèse principale prend appui sur le cadre conceptuel offert par la notion de « principe de précaution » dont les premières formulations remontent du début des années 1970, et qui avaient précisément pour objectif de remédier aux défaillances des outils et méthodes d’évaluation scientifique traditionnelles. La thèse est divisée en cinq parties. Commençant par une revue historique des modèles classiques des théories de la conception (design thinking) elle se concentre sur l’évolution des modalités de prise en compte de la durabilité. Dans cette perspective, on constate que les théories de la « conception verte » (green design) datant du début des années 1960 ou encore, les théories de la « conception écologique » (ecological design) datant des années 1970 et 1980, ont finalement convergé avec les récentes théories de la «conception durable» (sustainable design) à partir du début des années 1990. Les différentes approches du « principe de précaution » sont ensuite examinées sous l’angle de la question de la durabilité du projet. Les standards d’évaluation des risques sont comparés aux approches utilisant le principe de précaution, révélant certaines limites lors de la conception d’un projet. Un premier modèle théorique de la conception intégrant les principales dimensions du principe de précaution est ainsi esquissé. Ce modèle propose une vision globale permettant de juger un projet intégrant des principes de développement durable et se présente comme une alternative aux approches traditionnelles d’évaluation des risques, à la fois déterministes et instrumentales. L’hypothèse du principe de précaution est dès lors proposée et examinée dans le contexte spécifique du projet architectural. Cette exploration débute par une présentation de la notion classique de «prudence» telle qu’elle fut historiquement utilisée pour guider le jugement architectural. Qu’en est-il par conséquent des défis présentés par le jugement des projets d’architecture dans la montée en puissance des méthodes d’évaluation standardisées (ex. Leadership Energy and Environmental Design; LEED) ? La thèse propose une réinterprétation de la théorie de la conception telle que proposée par Donald A. Schön comme une façon de prendre en compte les outils d’évaluation tels que LEED. Cet exercice révèle cependant un obstacle épistémologique qui devra être pris en compte dans une reformulation du modèle. En accord avec l’épistémologie constructiviste, un nouveau modèle théorique est alors confronté à l’étude et l’illustration de trois concours d'architecture canadienne contemporains ayant adopté la méthode d'évaluation de la durabilité normalisée par LEED. Une série préliminaire de «tensions» est identifiée dans le processus de la conception et du jugement des projets. Ces tensions sont ensuite catégorisées dans leurs homologues conceptuels, construits à l’intersection du principe de précaution et des théories de la conception. Ces tensions se divisent en quatre catégories : (1) conceptualisation - analogique/logique; (2) incertitude - épistémologique/méthodologique; (3) comparabilité - interprétation/analytique, et (4) proposition - universalité/ pertinence contextuelle. Ces tensions conceptuelles sont considérées comme autant de vecteurs entrant en corrélation avec le modèle théorique qu’elles contribuent à enrichir sans pour autant constituer des validations au sens positiviste du terme. Ces confrontations au réel permettent de mieux définir l’obstacle épistémologique identifié précédemment. Cette thèse met donc en évidence les impacts généralement sous-estimés, des normalisations environnementales sur le processus de conception et de jugement des projets. Elle prend pour exemple, de façon non restrictive, l’examen de concours d'architecture canadiens pour bâtiments publics. La conclusion souligne la nécessité d'une nouvelle forme de « prudence réflexive » ainsi qu’une utilisation plus critique des outils actuels d’évaluation de la durabilité. Elle appelle une instrumentalisation fondée sur l'intégration globale, plutôt que sur l'opposition des approches environnementales.

The need of sustainable buildings construction in the Kingdom of Bahrain

This thesis is aimed to initiate implementing sustainable building construction in the kingdom of Bahrain, i.e. Building-Integration PhotoVoltaic (BIPV) or Wind Energy (BIWE). It highlights the main constrains that discourage such modern concept in building and construction. Three groups have been questioned using a questionnaire. These are the policy and decision makers, the leading consultants and the contractors. The main constrains of the dissemination of BIVP and BIWE, according to the policy and decision makers, are: lack of knowledge and awareness of the public in sustainable technology, low cost of electricity, low cost of gas and oil and difficulty in applying local environmental taxes. The consultants had attributed the constrains to ignorance of life cycle cost of PV and Wind turbines systems, lack of education and knowledge in sustainable design, political system, shortage of markets importing sustainable technologies and client worries in profitability and pay-back period. The contractors are found to be very enthusiastic and ready to take over any sustainable building project and prefer to have a construction manger to coordinate between the design and contracting team. Design and Build is found the favorable procurement method in Bahrain for conducting BIPV or BIWE projects.

Comparing the fit between BREEAM assessment and design processes

This paper explores the mapping of the environmental assessment process onto design and construction processes. A comparative case study method is used to identify and account for variations in the ‘fit’ between these two processes. The analysis compares eight BREEAM projects (although relevant to LEED, GreenStar, etc.) and distinguishes project-level characteristics and dynamics. Drawing on insights from literature on sustainable construction and assessment methods, an analytic framework is developed to examine the effect of clusters of project and assessment level elements on different types of fit (tight, punctual and bolt-on). Key elements distinguishing between types include: prior working experience with project team members, individual commitment to sustainable construction, experience with sustainable construction, project continuity, project-level ownership of the assessment process, and the nature and continuity of assessor involvement. Professionals with ‘sustainable’ experience used BREEAM judiciously to support their designs (along with other frameworks), but less committed professionals tended to treat it purely as an assessment method. More attention needs to be paid to individual levels of engagement with, and understanding of, sustainability in general (rather than knowledge of technical solutions to individual credits), to ownership of the assessment process and to the potential effect of discontinuities at the project level on sustainable design.

Fractal geometry and architecture design: case study review

The idea of buildings in harmony with nature can be traced back to ancient times. The increasing concerns on sustainability oriented buildings have added new challenges in building architectural design and called for new design responses. Sustainable design integrates and balances the human geometries and the natural ones. As the language of nature, it is, therefore, natural to assume that fractal geometry could play a role in developing new forms of aesthetics and sustainable architectural design. This paper gives a brief description of fractal geometry theory and presents its current status and recent developments through illustrative review of some fractal case studies in architecture design, which provides a bridge between fractal geometry and architecture design.

O design na indústria moveleira brasileira e seus aspectos sustentáveis: estudo de caso no pólo moveleiro de Arapongas-Pr

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

A Method for Assessing the Sustainability of Design in Developing World Projects

Projects for the developing world usually find themselves at the bottom of an engineer’s priority list. There is often very little engineering effort placed on creating new products for the poorest people in the world. This trend is beginning to change now as people begin to recognize the potential for these projects. Engineers are beginning to try and solve some of the direst issues in the developing world and many are having positive impacts. However, the conditions needed to support these projects can only be maintained in the short term. There is now a need for greater sustainability. Sustainability has a wide variety of definitions in both business and engineering. These concepts are analyzed and synthesized to develop a broad meaning of sustainability in the developing world. This primarily stems from the “triple bottom line” concept of economic, social, and environmental sustainability. Using this model and several international standards, this thesis develops a metric for guiding and evaluating the sustainability of engineering projects. The metric contains qualitative questions that investigate the sustainability of a project. It is used to assess several existing projects in order to determine flaws. Specifically, three projects seeking to deliver eyeglasses are analyzed for weaknesses to help define a new design approach for achieving better results. Using the metric as a guiding tool, teams designed two pieces of optometry equipment: one to cut lenses for eyeglasses and the other to diagnose refractive error, or prescription. These designs are created and prototyped in the developed and developing worlds in order to determine general feasibility. Although there is a recognized need for eventual design iterations, the whole project is evaluated using the developed metric and compared to the existing projects. Overall, the success demonstrates the improvements made to the long-term sustainability of the project resulting from the use of the sustainability metric.

Integration of Sustainable Development Principles into a Community Park

Characteristics of six operating hot spring recreational facilities were reviewed to identify opportunities for integrating a range of sustainable design and operation approaches into a community park. Potential operating cost savings were evaluated for a conceptual landscape project, bathhouse project, and swimming pool project that reduced the use of electricity, natural gas, water, the discharge of water, and solid waste generation. The projects showed a combined cost savings of approximately $40,000 per year by adopting passive solar design, energy efficient lighting, native vegetation, water efficient fixtures, and a natural swimming pool. The greatest potential operating cost reductions were observed for cutbacks in the use of swimming pool water and reductions in natural gas needed for building and swimming pool heating.