Complex natural resonances of conducting planar objects buried in a dielectric half-space

A scheme is presented to incorporate a mixed potential integral equation (MPIE) using Michalski's formulation C with the method of moments (MoM) for analyzing the scattering of a plane wave from conducting planar objects buried in a dielectric half-space. The robust complex image method with a two-level approximation is used for the calculation of the Green's functions for the half-space. To further speed up the computation, an interpolation technique for filling the matrix is employed. While the induced current distributions on the object's surface are obtained in the frequency domain, the corresponding time domain responses are calculated via the inverse fast Fourier transform (FFT), The complex natural resonances of targets are then extracted from the late time response using the generalized pencil-of-function (GPOF) method. We investigate the pole trajectories as we vary the distance between strips and the depth and orientation of single, buried strips, The variation from the pole position of a single strip in a homogeneous dielectric medium was only a few percent for most of these parameter variations.

A novel target-field method for finite-length magnetic resonance shim coils: I. Zonal shims

This paper presents a new approach for the design of genuinely finite-length shim and gradient coils, intended for use in magnetic resonance imaging equipment. A cylindrical target region is located asymmetrically, at an arbitrary position within a coil of finite length. A desired target field is specified on the surface of that region, and a method is given that enables winding patterns on the surface of the coil to be designed, to produce the desired field at the inner target region. The method uses a minimization technique combined with regularization, to find the current density on the surface of the coil. The method is illustrated for linear, quadratic and cubic magnetic target fields located asymmetrically within a finite-length coil.

Asymmetric zonal shim coils for magnetic resonance applications

A method is presented for the systematic design of asymmetric zonal shim coils for magnetic resonance applications. Fourier-series methods are used to represent the magnetic field inside and outside a circular cylinder of length 2L and radius a. The current density on the cylinder is also represented using Fourier series. Any desired field can be specified in advance on the cylinder's radius, over some nonsymmetric portion pL

The global sports-media nexus: Reflections on the 'Super League Saga' in Australia

Despite the social and (increasingly) commercial significance of sport and sporting bodies worldwide, they remain under-represented in the mainstream management literature. One of the more recent and dramatic examples of the global sports-media nexus is the 'Super League saga' in Australia. This paper recounts the tale of the Super League saga, providing a holistic analysis of the events and competitive issues arising by drawing on literatures concerning the economic nature and value of sports leagues, the resource-based view of the firm and the nature of psychological contracts in changing environments. The analysis confirms the general monopolistic tendencies of professional sports leagues in an increasingly global industry driven by the sports-media nexus, in accord with a number of comparable cases internationally. The particular conditions of the Australian marketplace that exacerbate this tendency beyond, for example, that found in the USA, and differences in the outcomes of battles between rival leagues are also considered. The Super League saga portrays the importance of effective management of resources key to the production of the 'rugby league product' including, among others, the often over-looked importance of careful management of local resources for the success of global strategies, and, where human resources are key, the importance of psychological contracting. The holistic analysis of the Super League saga in Australia affords lessons that extend well beyond the realm of sports.

On the induced electric field gradients in the human body for magnetic stimulation by gradient coils in MRI

Prior theoretical studies indicate that the negative spatial derivative of the electric field induced by magnetic stimulation may he one of the main factors contributing to depolarization of the nerve fiber. This paper studies this parameter for peripheral nerve stimulation (PNS) induced by time.-varying gradient fields during MRI scans. The numerical calculations are based on an efficient, quasi-static, finite-difference scheme and an anatomically realistic human, full-body model. Whole-body cylindrical and planar gradient sets in MRI systems and various input signals have been explored. The spatial distributions of the induced electric field and their gradients are calculated and attempts are made to correlate these areas with reported experimental stimulation data. The induced electrical field pattern is similar for both the planar coils and cylindrical coils. This study provides some insight into the spatial characteristics of the induced field gradients for PNS in MRI, which may be used to further evaluate the sites where magnetic stimulation is likely to occur and to optimize gradient coil design.

Multilayer transverse gradient coil design

In small, cylindrical gradient coils consisting of a single layer of wires, the limiting factor in achieving large magnetic field gradients is the rapid increase in coil resistance with efficiency. This behavior results from the decrease in the maximum usable wire diameter as the number of turns is increased. By adopting a multilayer design in which the coil wires are allowed to spread out into multiple layers wound at increasing radii, a more favorable scaling of resistance with efficiency is achieved, thus allowing the design of more powerful gradient coils with acceptable resistance values. By extending the theory used to design standard cylindrical gradient coils, mathematical expressions have been developed that allow the design of multilayer coils. These expressions have previously been applied to the design of a four-layer z-gradient coil. As a further development, the equations have now been modified to allow the design of multilayer transverse gradient coils. The variation in coil performance with the number of layers employed has been investigated for coils of a size suitable for use in NMR microscopy, and the effect of constructing the coil using wires or cuts in a continuous conducting surface has also been assessed. We find that at fixed resistance a small wire-wound two-layer coil offers an increase in efficiency of a factor of about 1.5 compared with a single-layer coil. In addition, a two-layer coil of 10-mm inner diameter has been designed and built. This coil had an efficiency of 0.41 Tm-1 A(-1), a resistance of 0.96 +/- 0.01 Omega, and an inductance of 22.3 +/- 0.2 muH. The coil produces a gradient that deviates from linearity by less than 5% over a central cylindrical region of interest of height and length 6.2 mm. (C) 2003 Wiley Periodicals, Inc.

A novel target-field method for magnetic resonance shim coils: III. Shielded zonal and tesseral coils

This paper continues the development of a new approach for the design of shim and gradient coils, used in magnetic resonance imaging (MRI) applications. A cylindrical primary coil of radius a and length 2L is placed inside a co-axial shield cylinder of radius b. An active shielding strategy is used to create a desired target field at an arbitrarily specified (cylindrical) location within the primary coil, and to annul the field at a certain radius outside the shield. The form of the interior target field may be chosen arbitrarily by the designer, although zonal and tesseral harmonics are typically used in MRI applications. The method presented here designs coil windings on both the primary and shielding cylinders, to produce fields that conform to the specified interior target field and the annulled field exterior to the shield. An additional feature of the method presented here is that the target field inside the primary coil is matched at two different radii, to improve overall accuracy. The method is illustrated by designing several shielded shim coils, for creating higher order tesseral fields located asymmetrically within the coil. The simpler case of pure zonal fields is discussed separately and applied to the design of some higher order shielded coils.

Classificação de empreendimentos super prime: aplicação ao caso prático - Palácio Estoril Residências

O tema deste trabalho visa abordar a Construção de Edifícios Residenciais de características singulares no mercado da Construção / Imobiliário, nomeadamente no que diz respeito à garantia das características a eles implícitas. Assim, abordam-se conseitos como a diferenciação e customização na construção, a especialização da equipa de trabalho e a classificação de empreendimentos, aqui designados como Super Prime. Um empreendimento Super Prime deve permitir alcançar um modo de vida bastante particular, movido pelo gosto, pela ostentação e pelo prazer. Um produto com estas características deve ser definido pela sua qualidade, exclusividade, criatividade, marca, emoção, autenticidade, prestígio e glamour. Num sector em constante mudança, cada vez mais exigente e competitivo e altamente dependente do mercado económico, facilmente se compreende a necessidade de diferenciação na construção de imóveis e da consciencialização do consumidor para a qualidade dos produtos. No entanto, não existe nenhuma metodologia, quer a nível nacional, quer a nível internacional, que garanta este conceito de classificação de edifícios residenciais. Este facto levou à proposta de uma Metodologia de Classificação de Empreendimentos Super Prime, que se designou por MCESP, e que tem como objectivo principal a verificação do cumprimento dos requisitos técnicos implícitos a estes empreendimentos, possibilitando a sua classificação dentro desse segmento. Desta forma, identificaram-se esses requisitos técnicos, definiu-se uma hierarquia lógica de exigências a cumprir, procedeu-se à distinção qualitativa de cada característica apresentada e obteve-se uma avaliação numérica, gráfica e justificativa. De uma forma geral, a proposta deste método de classificação surge como um critério de diferenciação e de notoriedade para empreiteiros, donos de obra e promotores, aumentando a rentabilidade e competitividade de uma empresa. A sua adopção possibilita a optimização de soluções, o aumento do nível de confiança dos clientes e o aumento de prestígio das suas empresas. Procurou-se igualmente, contribuir para o avanço do conhecimento no campo da tecnologia de construção residencial Super Prime, apoiando a inovação, o desenvolvimento e a personalização, contribuindo para um melhor produto final.

A lightweight distributed super peer election algorithm for unstructured dynamic P2P systems

Dissertação apresentada na Faculdade de Ciências e Tecnologia da Universidade Nova de Lisboa para obtenção do grau de Mestre em Engenharia Electrotécnica e de Computadores

População e Enriquecimento de Ontologias através de Web Scraping

O surgir da World Wide Web providenciou aos utilizadores uma série de oportunidades no que diz respeito ao acesso a dados e informação. Este acesso tornou-se um ato banal para qualquer utilizador da Web, tanto pelo utilizador comum como por outros mais experientes, tanto para obter informações básicas, como outras informações mais complexas. Todo este avanço tecnológico permitiu que os utilizadores tivessem acesso a uma vasta quantidade de informação, dispersa pelo globo, não tendo, na maior parte das vezes, a informação qualquer tipo de ligação entre si. A necessidade de se obter informação de interesse relativamente a determinado tema, mas tendo que recorrer a diversas fontes para obter toda a informação que pretende obter e comparar, torna-se um processo moroso para o utilizador. Pretende-se que este processo de recolha de informação de páginas web seja o mais automatizado possível, dando ao utilizador a possibilidade de utilizar algoritmos e ferramentas de análise e processamento automáticas, reduzindo desta forma o tempo e esforço de realização de tarefas sobre páginas web. Este processo é denominado Web Scraping. Neste trabalho é descrita uma arquitetura de sistema de web scraping automático e configurável baseado em tecnologias existentes, nomeadamente no contexto da web semântica. Para tal o trabalho desenvolvido analisa os efeitos da aplicação do Web Scraping percorrendo os seguintes pontos: • Identificação e análise de diversas ferramentas de web scraping; • Identificação do processo desenvolvido pelo ser humano complementar às atuais ferramentas de web scraping; • Design duma arquitetura complementar às ferramentas de web scraping que dê apoio ao processo de web scraping do utilizador; • Desenvolvimento dum protótipo baseado em ferramentas e tecnologias existentes; • Realização de experiências no domínio de aplicação de páginas de super-mercados portugueses; • Analisar resultados obtidos a partir destas.

Um algoritmo de disseminação filtrada baseado em super nós e na redundância de filtros

Dissertação para obtenção do Grau de Mestre em Engenharia Informática

Study of AC losses in medium-sized high temperature superconducting coils

The study of AC losses in superconducting pancake coils is of utmost importance for the development of superconducting devices. Due to different technical difficulties this study is usually performed considering one of two approaches: considering superconducting coils of few turns and studying AC losses in a large frequency range vs. superconducting coils with a large number of turns but measuring AC losses only in low frequencies. In this work, a study of AC losses in 128 turn superconducting coils is performed, considering frequencies ranging from 50 Hz till 1152 Hz and currents ranging from zero till the critical current of the coils. Moreover, the study of AC losses considering two different simultaneous harmonic components is also performed and results are compared to the behaviour presented by the coils when operating in a single frequency regime. Different electrical methods are used to verify the total amount of AC losses in the coil and a simple calorimetric method is presented, in order to measure AC losses in a multi-harmonic context. Different analytical and numerical methods are implemented and/or used, to design the superconducting coils and to compute the total amount of AC losses in the superconducting system and a comparison is performed to verify the advantages and drawbacks of each method.