SPH calculations of asteroid disruptions: The role of pressure dependent failure models

We present recent improvements of the modeling of the disruption of strength dominated bodies using the Smooth Particle Hydrodynamics (SPH) technique. The improvements include an updated strength model and a friction model, which are successfully tested by a comparison with laboratory experiments. In the modeling of catastrophic disruptions of asteroids, a comparison between old and new strength models shows no significant deviation in the case of targets which are initially non-porous, fully intact and have a homogeneous structure (such as the targets used in the study by Benz and Asphaug, 1999). However, for many cases (e.g. initially partly or fully damaged targets and rubble-pile structures) we find that it is crucial that friction is taken into account and the material has a pressure dependent shear strength. Our investigations of the catastrophic disruption threshold (27, as a function of target properties and target sizes up to a few 100 km show that a fully damaged target modeled without friction has a Q(D)*:, which is significantly (5-10 times) smaller than in the case where friction is included. When the effect of the energy dissipation due to compaction (pore crushing) is taken into account as well, the targets become even stronger (Q(D)*; is increased by a factor of 2-3). On the other hand, cohesion is found to have an negligible effect at large scales and is only important at scales less than or similar to 1 km. Our results show the relative effects of strength, friction and porosity on the outcome of collisions among small (less than or similar to 1000 km) bodies. These results will be used in a future study to improve existing scaling laws for the outcome of collisions (e.g. Leinhardt and Stewart, 2012). (C) 2014 Elsevier Ltd. All rights reserved.

Crack mechanical failure in lithium niobate crystal under ion irradiation; novel simulation by extended finite elements

Swift heavy ion irradiation (ions with mass heavier than 15 and energy exceeding MeV/amu) transfer their energy mainly to the electronic system with small momentum transfer per collision. Therefore, they produce linear regions (columnar nano-tracks) around the straight ion trajectory, with marked modifications with respect to the virgin material, e.g., phase transition, amorphization, compaction, changes in physical or chemical properties. In the case of crystalline materials the most distinctive feature of swift heavy ion irradiation is the production of amorphous tracks embedded in the crystal. Lithium niobate is a relevant optical material that presents birefringence due to its anysotropic trigonal structure. The amorphous phase is certainly isotropic. In addition, its refractive index exhibits high contrast with those of the crystalline phase. This allows one to fabricate waveguides by swift ion irradiation with important technological relevance. From the mechanical point of view, the inclusion of an amorphous nano-track (with a density 15% lower than that of the crystal) leads to the generation of important stress/strain fields around the track. Eventually these fields are the origin of crack formation with fatal consequences for the integrity of the samples and the viability of the method for nano-track formation. For certain crystal cuts (X and Y), these fields are clearly anisotropic due to the crystal anisotropy. We have used finite element methods to calculate the stress/strain fields that appear around the ion-generated amorphous nano-tracks for a variety of ion energies and doses. A very remarkable feature for X cut-samples is that the maximum shear stress appears on preferential planes that form +/-45º with respect to the crystallographic planes. This leads to the generation of oriented surface cracks when the dose increases. The growth of the cracks along the anisotropic crystal has been studied by means of novel extended finite element methods, which include cracks as discontinuities. In this way we can study how the length and depth of a crack evolves as function of the ion dose. In this work we will show how the simulations compare with experiments and their application in materials modification by ion irradiation.

Crack mechanical failure in ceramic materials under ion irradiation: case of lithium niobate crystal

Swift heavy ion irradiation (ions with mass heavier than 15 and energy exceeding MeV/amu) transfer their energy mainly to the electronic system with small momentum transfer per collision. Therefore, they produce linear regions (columnar nano-tracks) around the straight ion trajectory, with marked modifications with respect to the virgin material, e.g., phase transition, amorphization, compaction, changes in physical or chemical properties. In the case of crystalline materials the most distinctive feature of swift heavy ion irradiation is the production of amorphous tracks embedded in the crystal. Lithium niobate is a relevant optical material that presents birefringence due to its anysotropic trigonal structure. The amorphous phase is certainly isotropic. In addition, its refractive index exhibits high contrast with those of the crystalline phase. This allows one to fabricate waveguides by swift ion irradiation with important technological relevance. From the mechanical point of view, the inclusion of an amorphous nano-track (with a density 15% lower than that of the crystal) leads to the generation of important stress/strain fields around the track. Eventually these fields are the origin of crack formation with fatal consequences for the integrity of the samples and the viability of the method for nano-track formation. For certain crystal cuts (X and Y), these fields are clearly anisotropic due to the crystal anisotropy. We have used finite element methods to calculate the stress/strain fields that appear around the ion- generated amorphous nano-tracks for a variety of ion energies and doses. A very remarkable feature for X cut-samples is that the maximum shear stress appears on preferential planes that form +/-45º with respect to the crystallographic planes. This leads to the generation of oriented surface cracks when the dose increases. The growth of the cracks along the anisotropic crystal has been studied by means of novel extended finite element methods, which include cracks as discontinuities. In this way we can study how the length and depth of a crack evolves as function of the ion dose. In this work we will show how the simulations compare with experiments and their application in materials modification by ion irradiation.

Case study in failure analysis of accelerated life tests (ALT) on III-V commercial triple-junction concentrator solar cells

In this work the failure analysis carried out in III-V concentrator multijunction solar cells after a temperature accelerated life test is presented. All the failures appeared have been catastrophic since all the solar cells turned into low shunt resistances. A case study in failure analysis based on characterization by optical microscope, SEM, EDX, EQE and XPS is presented in this paper, revealing metal deterioration in the bus bar and fingers as well as cracks in the semiconductor structure beneath or next to the bus bar. In fact, in regions far from the bus bar the semiconductor structure seems not to be damaged. SEM images have dismissed the presence of metal spikes inside the solar cell structure. Therefore, we think that for these particular solar cells, failures appear mainly as a consequence of a deficient electrolytic growth of the front metallization which also results in failures in the semiconductor structure close to the bus bars.

Global properties of the mapping between local amino acid sequence and local structure in proteins.

Local protein structure prediction efforts have consistently failed to exceed approximately 70% accuracy. We characterize the degeneracy of the mapping from local sequence to local structure responsible for this failure by investigating the extent to which similar sequence segments found in different proteins adopt similar three-dimensional structures. Sequence segments 3-15 residues in length from 154 different protein families are partitioned into neighborhoods containing segments with similar sequences using cluster analysis. The consistency of the sequence-to-structure mapping is assessed by comparing the local structures adopted by sequence segments in the same neighborhood in proteins of known structure. In the 154 families, 45% and 28% of the positions occur in neighborhoods in which one and two local structures predominate, respectively. The sequence patterns that characterize the neighborhoods in the first class probably include virtually all of the short sequence motifs in proteins that consistently occur in a particular local structure. These patterns, many of which occur in transitions between secondary structural elements, are an interesting combination of previously studied and novel motifs. The identification of sequence patterns that consistently occur in one or a small number of local structures in proteins should contribute to the prediction of protein structure from sequence.

An RNA structure involved in feedback regulation of splicing and of translation is critical for biological fitness.

While studies of the regulation of gene expression have generally concerned qualitative changes in the selection or the level of expression of a gene, much of the regulation that occurs within a cell involves the continuous subtle optimization of the levels of proteins used in macromolecular complexes. An example is the biosynthesis of the ribosome, in which equimolar amounts of nearly 80 ribosomal proteins must be supplied by the cytoplasm to the nucleolus. We have found that the transcript of one of the ribosomal protein genes of Saccharomyces cerevisiae, RPL32, participates in such fine tuning. Sequences from exon I of the RPL32 transcript interact with nucleotides from the intron to form a structure that binds L32 to regulate splicing. In the spliced transcript, the same sequences interact with nucleotides from exon II to form a structure that binds L32 to regulate translation, thus providing two levels of autoregulation. We now show, by using a sensitive cocultivation assay, that these RNA structures and their interaction with L32 play a role in the fitness of the cell. The change of a single nucleotide within the 5' leader of the RPL32 transcript, which abolishes the site for L32 binding, leads to detectably slower growth and to eventual loss of the mutant strain from the culture. Experiments designed to assess independently the regulation of splicing and the regulation of translation are presented. These observations demonstrate that, in evolutionary terms, subtle regulatory compensations can be critical. The change in structure of an RNA, due to alteration of just one noncoding nucleotide, can spell the difference between biological success and failure.

Seismically-Induced Rock-Slope Failure: Numerical Investigation using the Bonded Particle Model

Thesis (Ph.D.)--University of Washington, 2016-06

Two-Dimensional Failure Modeling with Minimal Repair

In this paper, we discuss two-dimensional failure modeling for a system where degradation is due to age and usage. We extend the concept of minimal repair for the one-dimensional case to the two-dimensional case and characterize the failures over a two-dimensional region under minimal repair. An application of this important result to a rnanufacturer's servicing costs for a two-dimensional warranty policy is given and we compare the minimal repair strategy with the strategy of replacement of failure. (C) 2003 Wiley Periodicals, Inc.

Delayed administration of darbepoetin or erythropoietin protects against ischemic acute renal injury and failure

Administration of human recombinant erythropoietin ( EPO) at time of acute ischemic renal injury ( IRI) inhibits apoptosis, enhances tubular epithelial regeneration, and promotes renal functional recovery. The present study aimed to determine whether darbepoetin-alfa ( DPO) exhibits comparable renoprotection to that afforded by EPO, whether pro or antiapoptotic Bcl-2 proteins are involved, and whether delayed administration of EPO or DPO 6 h following IRI ameliorates renal dysfunction. The model of IRI involved bilateral renal artery occlusion for 45 min in rats ( N = 4 per group), followed by reperfusion for 1-7 days. Controls were sham-operated. Rats were treated at time of ischemia or sham operation ( T0), or post-treated ( 6 h after the onset of reperfusion, T6) with EPO ( 5000 IU/kg), DPO ( 25 mu g/kg), or appropriate vehicle by intraperitoneal injection. Renal function, structure, and immunohistochemistry for Bcl-2, Bcl-XL, and Bax were analyzed. DPO or EPO at T0 significantly abrogated renal dysfunction in IRI animals ( serum creatinine for IRI 0.17 +/- 0.05mmol/l vs DPO-IRI 0.08 +/- 0.03mmol/l vs EPO-IRI 0.04 +/- 0.01mmol/l, P = 0.01). Delayed administration of DPO or EPO ( T6) also significantly abrogated subsequent renal dysfunction ( serum creatinine for IRI 0.17 +/- 0.05mmol/l vs DPO-IRI 0.06 +/- 0.01mmol/l vs EPO-IRI 0.03 +/- 0.03mmol/l, P = 0.01). There was also significantly decreased tissue injury ( apoptosis, P < 0.05), decreased proapoptotic Bax, and increased regenerative capacity, especially in the outer stripe of the outer medulla, with DPO or EPO at T0 or T6. These results reaffirm the potential clinical application of DPO and EPO as novel renoprotective agents for patients at risk of ischemic acute renal failure or after having sustained an ischemic renal insult.

What is English for? Language structure and the curriculum for English

This article uses Bernstein’s theory of pedagogic discourse to account for both the processes by which curriculum change occurs and the failure of efforts to introduce meaningful attention to language structure into national curricula.

Deformation and failure of welded steels used in offshore constructions

Hydrocarbons are the most common form of energy used to date. The activities involving exploration and exploitation of large oil and gas fields are constantly in operation and have extended to such hostile environments as the North Sea. This enforces much greater demands on the materials which are used, and the need for enhancing the endurance of the existing ones which must continue parallel to the explorations. Due to their ease in fabrication, relatively high mechanical properties and low costs, steels are the most widely favoured material for the construction of offshore platforms. The most critical part of an offshore structure prone to failure are the welded nodal joints, particulary those which are used within the vicinity of the splash zones. This is an area of high complex stress concentrations, varying mechanical and metallurgical properties in addition to severe North Sea environmental conditions. The main are of this work has been concerned with the durability studies of this type of steel, based on the concept of the worst case analysis, consisting of combinations of welds of varying qualities, various degrees of stress concentrations and the environmental conditions of stress corrosion and hydrogen embrittlement. The experiments have been designed to reveal significance of defects as sites of crack initiation in the welded steels and the extent to which stress corrosion and hydrogen embrittlement will limit their durability. This has been done for various heat treatments and in some experiments deformation has been forced through the welded zone of the specimens to reveal the mechanical properties of the welds themselves to provide data for finite element simulations. A comparison of the results of these simulations with the actual deformation and fracture behaviour has been done to reveal the extent to which both mechanical and metallurgical factors control behaviour of the steels in the hostile environments of high stress, corrosion, and hydrogen embrittlement at their surface.

Democratic purgatory: The failure of democracy in Venezuela

This research provides an understanding of the conditions that presage the failure of consolidated democratic political regimes through constitutional processes. In seeking to answer the question of how democracy might fail through democratic means, this study has revealed a gap in the literature on democratization. Venezuela was selected as a heuristic case study to explain this phenomenon. Heuristic case studies place less emphasis on the more configurative or descriptive elements of the case itself, and instead see the case as a point of departure for the formulations of theoretical propositions. While in-case hypotheses are possible, heuristic case studies make it an explicit research plan to tease out mechanisms that exist in a particular case study that might survive in other situations. ^ This study demonstrates that the elements in society that act as direct participants in the establishment of a democratic political system are able to maintain their position in the new order largely through an expansion of their ability to meet popular demands through clientelistic arrangements. While these corporatist groups may serve to facilitate social mobilization during the establishment of democratic regimes, they do so only in so far as they can maintain social control of in-group membership without fully providing for representative democracy. Once these democratic institutions are consolidated as key parts of the democratic structure, these corporatist arrangements provide for a type of unstable democratic purgatory: democracy is not fully representative, yet it is not completely unresponsive to the demands of the electorate. ^ The condition of democratic purgatory produces a paradox whereby democracy can be undemocratic under certain conditions. The stability of these regimes allows for democratic consolidation, despite the undemocratic basis of legitimacy. While these regimes can undergo consolidation, ultimately, this condition is unstable: either these regimes must establish an endogenous basis of political legitimacy (one that is not simply a function of the corporatist/clientelistic political structure), or the democracy will suffer a qualitative decline that may result in a democratic breakdown. Furthermore, this study finds that the viability of any type of democratic regime rests upon its adaptability to ensure adequate representativeness. ^

Life expectancy for community-based patients with heart failure from time of diagnosis

AIMS: Heart failure has been demonstrated in previous studies to have a dismal prognosis. However, the modern-day prognosis of patients with new onset heart failure diagnosed in the community managed within a disease management programme is not known. The purpose of this study is to report on prognosis of patients presenting with new onset heart failure in the community who are subsequently followed in a disease management program.

METHODS AND RESULTS: A review of patients referred to a rapid access heart failure diagnostic clinic between 2002 and 2012 was undertaken. Details of diagnosis, demographics, medical history, medications, investigations and mortality data were analysed. A total of 733 patients were seen in Rapid Access Clinic for potential new diagnosis of incident of heart failure. 38.9% (n=285) were diagnosed with heart failure, 40.7% (n=116) with HF-REF and 59.3% (n=169) with HF-PEF. There were 84 (29.5%) deaths in the group of patients diagnosed with heart failure; 41 deaths (35.3%) occurred in patients with HF-REF and 43 deaths (25.4%) occurred in patients with HF-PEF. In patients with heart failure, 52.4% (n=44) died from cardiovascular causes. 63.8% of HF patients were alive after 5 years resulting on average in a month per year loss of life expectancy over that period compared with aged matched simulated population.

CONCLUSIONS: In this community-based cohort, the prognosis of heart failure was better than reported in previous studies. This is likely due to the impact of prompt diagnosis, the improvement in therapies and care within a disease management structure.

Importance of risk factor management in diabetic patients and reduction in Stage B heart failure

BACKGROUND: A number of studies have demonstrated the presence of a diabetic cardiomyopathy, increasing the risk of heart failure development in this population. Improvements in present-day risk factor control may have modified the risk of diabetes-associated cardiomyopathy.

AIM: We sought to determine the contemporary impact of diabetes mellitus (DM) on the prevalence of cardiomyopathy in at-risk patients with and without adjustment for risk factor control.

DESIGN: A cross-sectional study in a population at risk for heart failure.

METHODS: Those with diabetes were compared to those with other cardiovascular risk factors, unmatched, matched for age and gender and then matched for age, gender, body mass index, systolic blood pressure and low density lipoprotein cholesterol.

RESULTS: In total, 1399 patients enrolled in the St Vincent's Screening to Prevent Heart Failure (STOP-HF) cohort were included. About 543 participants had an established history of DM. In the whole sample, Stage B heart failure (asymptomatic cardiomyopathy) was not found more frequently among the diabetic cohort compared to those without diabetes [113 (20.8%) vs. 154 (18.0%), P = 0.22], even when matched for age and gender. When controlling for these risk factors and risk factor control Stage B was found to be more prevalent in those with diabetes [88 (22.2%)] compared to those without diabetes [65 (16.4%), P = 0.048].

CONCLUSION: In this cohort of patients with established risk factors for Stage B heart failure superior risk factor management among the diabetic population appears to dilute the independent diabetic insult to left ventricular structure and function, underlining the importance and benefit of effective risk factor control in this population on cardiovascular outcomes.