Phylogenetic group distribution among Escherichia coli isolated from rivers in Sao Paulo State, Brazil

The phylogenetic group distribution of Escherichia coli strains isolated from the Sorocaba and Jaguari Rivers located in the State of Sao Paulo, Brazil, is described. E. coli strains from group D were found in both rivers while one strain from group B2 was isolated from the Sorocaba river. These two groups often include strains that can cause extraintestinal diseases. Most of the strains analyzed were allocated into the phylogenetic groups A and B1, supporting the hypothesis that strains from these phylogenetic groups are more abundant in tropical areas. Though both rivers are located in urbanized and industrialized areas where the main source of water pollution is considered to derive from domestic sewage, our results suggest that the major sources of contamination in the sampling sites of both rivers might have originated from animals and not humans.

Age-dependent changes in adenosine A(1) receptor distribution and density within the nucleus tractus solitarii of normotensive and hypertensive rats

This study shows the distribution and density of adenosine A1 receptor (A(1)R) within the nucleus tractus solitarii (NTS) of Wistar Kyoto (WKY) and spontaneously hypertensive rats (SHR) from birth to adulthood (1, 15, 30 and 90 days old). The NTS shows heterogeneous distribution of A(1)R in dorsomedial/dorsolateral, subpostremal and medial/intermediate subnuclei. A(1)R decrease from rostral to caudal within dorsomedial/dorsolateral subnucleus in 15-, 30- and 90-day-old WKY and SHR. A(1)R increase from rostral to caudal subpostremal subnucleus in 30- and 90-day-old WKY, and in 15-, 30- and 90-day-old SHR. Furthermore, A(1)Rs are increased in SHR as compared with WKY within dorsomedial/dorsolateral in 30- and 90-day-old and within subpostremal of 15-, 30- and 90-day-old rats. Finally, A(1)Rs increase from 1- to 30-day-old rats. Medial/intermediate did not show any changes in A(1)R from rostral to caudal levels, age or strain. In summary, our result highlights the importance of A1 adenosine system regarding the neural control of blood pressure and the development of hypertension.

Effect of abutment's height and framework alloy on the load distribution of mandibular cantilevered implant-supported prosthesis

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Effect of cantilever length and framework alloy on the stress distribution of mandibular-cantilevered implant-supported prostheses

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Pathology and Tissue Distribution of Turkey Coronavirus in Experimentally Infected Chicks and Turkey Poults

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Cortical Bone Stress Distribution in Mandibles with Different Configurations Restored with Prefabricated Bar-Prosthesis Protocol: A Three-Dimensional Finite-Element Analysis

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Distribution and hydrolytic enzyme characteristics of Candida albicans strains isolated from diabetic patients and their non-diabetic consorts

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Distribution and biological role of the oligopeptide-binding protein (OppA) in Xanthomonas species

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Study of stress distribution with finite element method in a root with prefabricated threaded split shaft post - Part I

A finite element analysis was carried out to study the role of prefabricated threaded split shaft post (Flexi-Post) on dentinal stress in pulpless tooth. Three dimensional plane strain model of mesio-distal section of a human maxillary central incisor without restoration was analysed with the MSC/NASTRAN (MacNeal/ Schwendler) general purpose finite analysis program was executed on a microcomputer. The model as discretized into 48.954 axisymmetric finite elements defined by 10.355 nodes. Each element was assigned unique elastic properties to represent the materials modeled. Homogeneity, isotropy and linear elasticity were assume for all material. A simulation of static load of 100N was applied to the incisal edge of the post; vertical. Maximal principal stresses and von Mises equivalent stress were calculated. Using the element analysis model employed in this study, the following can be concluded concerning threaded split shaft post (Flexi-Post): Maximum principal stresses in dentin were located at cervical place and at the post apex. The apical threads of the post not redirecting stresses away from the root.

Distribution of exoantigens and a 43-kDa glycoprotein (gp43) in the yeast and mycelial forms of Paracoccidioides brasiliensis

Objective. Paracoccidioides brasiliensis antigens (strain 113) were located at ultrastructural level in both yeast and mycelial forms of the fungus. The reactivity of the sera employed was analysed. Materials and methods. Immunofluorescence and ultrastructural protein A-gold immunolabelling techniques were performed using two polyclonal antisera: one against P. brasiliensis exoantigens and the other against a 43-kDa glycoprotein (gp43). Immunoblotting assays were employed to define reactivity of these antisera with somatic and metabolic antigens of both forms of the fungus. Results. The techniques employed revealed in both yeast and mycelial forms of P. brasiliensis a similar antigenic distribution. The antigens deposits were seen within the cytoplasm, and over the cell wall of the fungus. The anti-exoantigen serum recognized several bands in both forms of the fungus. The anti-gp43 serum reacted strongly with the 43-kDa fraction and weakly with few other fractions. Conclusions. Immunocytochemical techniques suggest a protein synthesis within the cytoplasm followed by excretion through the cell wall. Similar results employing both polyclonal antisera were obtained.

Transposon Tn1721 distribution among strains of Xylella fastidiosa

Transposons are mobile genetic elements found within the genomes of various organisms including bacteria, fungi, plants and animals. Fragments of the transposon Tn1721 were found included in the genome of Xylella fastidiosa strain 9a5c. Regions from such fragments were PCR-amplified using specially designed primers (TNP1 and TNP2). In order to detect insertions of the Tn1721 element, both primers were used and one of them included a region of the transposon (TNP1) and the other one had the right repeat and part of the bacterial chromosome (TNP2). The PCR products obtained from strain 9a5c were used as a pattern for fragment size comparisons when DNA samples from other X. fastidiosa strains were used as template for the PCR assays. Differences were observed concerning the PCR products of such amplifications when some X. fastidiosa strains isolated from grapevine and plum were used. For the citrus-derived strains only the strains U187d and GP920b produced fragments with different sizes or weak band intensity. Such variations in the X. fastidiosa genome related to disrupted Tn1721 copies are probably due to the possibility of such a transposon element being still able to duplicate even after deletion events might have taken place and also because the bacterial strains in which the main differences were detected are derived from different host plants cultivated under different climate conditions from the one used as reference. © 2002 Federation of European Microbiological Societies. Published by Elsevier Science B.V. All rights reserved.

Influence of microthreads and platform switching on stress distribution in bone using angled abutments

Purpose: To evaluate the stress distribution in peri-implant bone by simulating the effect of an implant with microthreads and platform switching on angled abutments through tridimensional finite element analysis. The postulated hypothesis was that the presence of microthreads and platform switching would reduce the stress concentration in the cortical bone. Methods: Four mathematical models of a central incisor supported by an implant (5.0mm×13mm) were created in which the type of thread surface in the neck portion (microthreaded or smooth) and the diameter of the angled abutment connection (5.0 and 4.1mm) were varied. These models included the RM (regular platform and microthreads), the RS (regular platform and smooth neck surface), the SM (platform switching and microthreads), and the SS (platform switching and smooth neck). The analysis was performed using ANSYS Workbench 10.0 (Swanson Analysis System). An oblique load (100N) was applied to the palatine surface of the central incisor. The bone/implant interface was considered to be perfectly integrated. Values for the maximum (σmax) and minimum (σmin) principal stress, the equivalent von Mises stress (σvM), and the maximum principal elastic strain (e{open}max) for cortical and trabecular bone were obtained. Results: For the cortical bone, the highest σmax (MPa) were observed for the RM (55.1), the RS (51.0), the SM (49.5), and the SS (44.8) models. The highest σvM (MPa) were found for the RM (45.4), the SM (42.1), the RS (38.7), and the SS models (37). The highest values for σmin were found for the RM, SM, RS and SS models. For the trabecular bone, the highest σmax values (MPa) were observed in the RS model (6.55), followed by the RM (6.37), SS (5.6), and SM (5.2) models. Conclusion: The hypothesis that the presence of microthreads and a switching platform would reduce the stress concentration in the cortical bone was partially rejected, mainly because the microthreads increased the stress concentration in cortical bone. Only platform switching reduced the stress in cortical bone. © 2012 Japan Prosthodontic Society.

Bone stress and strain after use of a miniplate for molar protraction and uprighting: a 3-dimensional finite element analysis

The aim of this study was to use the finite element method to evaluate the distribution of stresses and strains on the local bone tissue adjacent to the miniplate used for anchorage of orthodontic forces. Methods: A 3-dimensional model composed of a hemimandible and teeth was constructed using dental computed tomographic images, in which we assembled a miniplate with fixation screws. The uprighting and mesial movements of the mandibular second molar that was anchored with the miniplate were simulated. The miniplate was loaded with horizontal forces of 2, 5, and 15 N. A moment of 11.77 N.mm was also applied. The stress and strain distributions were analyzed, and their correlations with the bone remodeling criteria and miniplate stability were assessed. Results: When orthodontic loads were applied, peak bone strain remained within the range of bone homeostasis (100-1500 mu m strain) with a balance between bone formation and resorption. The maximum deformation was found to be 1035 mu m strain with a force of 5 N. At a force of 15 N, bone resorption was observed in the region of the screws. Conclusions: We observed more stress concentration around the screws than in the cancellous bone. The levels of stress and strain increased when the force was increased but remained within physiologic levels. The anchorage system of miniplate and screws could withstand the orthodontic forces, which did not affect the stability of the miniplate.

Detection of an untyped strain of bovine respiratory syncytial virus in a dairy herd

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Pathology and virus tissue distribution of Turkey Coronavirus (TCoV) in experimentally infected chicks and turkey poults

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)