Heterogenitás és technikai hatékonyság - a magyar specializált szántóföldi növénytermesztő üzemek esete = Heterogeneity and technical efficiency - the case of Hungary's specialized arable crop production units

A cikkben paneladatok segítségével a magyar gabonatermesztő üzemek 2001 és 2009 közötti technikai hatékonyságát vizsgáljuk. A technikai hatékonyság szintjének becslésére egy hagyományos sztochasztikus határok modell (SFA) mellett a látens csoportok modelljét (LCM) használjuk, amely figyelembe veszi a technológiai különbségeket is. Eredményeink arra utalnak, hogy a technológiai heterogenitás fontos lehet egy olyan ágazatban is, mint a szántóföldi növénytermesztés, ahol viszonylag homogén technológiát alkalmaznak. A hagyományos, azonos technológiát feltételező és a látens osztályok modelljeinek összehasonlítása azt mutatja, hogy a gabonatermesztő üzemek technikai hatékonyságát a hagyományos modellek alábecsülhetik. _____ The article sets out to analyse the technical efficiency of Hungarian crop farms between 2001 and 2009, using panel data and employing both standard stochastic frontier analysis and the latent class model (LCM) to estimate technical efficiency. The findings suggest that technological heterogeneity plays an important role in the crop sector, though it is traditionally assumed to employ homogenous technology. A comparison of standard SFA models that assumes the technology is common to all farms and LCM estimates highlights the way the efficiency of crop farms can be underestimated using traditional SFA models.

Three essays on hospital efficiency

This dissertation analyzes hospital efficiency using various econometric techniques. The first essay provides additional and recent evidence to the presence of contract management behavior in the U.S. hospital industry. Unlike previous studies, which focus on either an input-demand equation or the cost function of the firm, this paper estimates the two jointly using a system of nonlinear equations. Moreover, it addresses the longitudinal problem of institutions adopting contract management in different years, by creating a matched control group of non-adopters with the same longitudinal distribution as the group under study. The estimation procedure then finds that labor, and not capital, is the preferred input in U.S. hospitals regardless of managerial contract status. With institutions that adopt contract management benefiting from lower labor inefficiencies than the simulated non-contract adopters. These results suggest that while there is a propensity for expense preference behavior towards the labor input, contract managed firms are able to introduce efficiencies over conventional, owner controlled, firms. Using data for the years 1998 through 2007, the second essay investigates the production technology and cost efficiency faced by Florida hospitals. A stochastic frontier multiproduct cost function is estimated in order to test for economies of scale, economies of scope, and relative cost efficiencies. The results suggest that small-sized hospitals experience economies of scale, while large and medium sized institutions do not. The empirical findings show that Florida hospitals enjoy significant scope economies, regardless of size. Lastly, the evidence suggests that there is a link between hospital size and relative cost efficiency. The results of the study imply that state policy makers should be focused on increasing hospital scale for smaller institutions while facilitating the expansion of multiproduct production for larger hospitals. The third and final essay employs a two staged approach in analyzing the efficiency of hospitals in the state of Florida. In the first stage, the Banker, Charnes, and Cooper model of Data Envelopment Analysis is employed in order to derive overall technical efficiency scores for each non-specialty hospital in the state. Additionally, input slacks are calculated and reported in order to identify the factors of production that each hospital may be over utilizing. In the second stage, we employ a Tobit regression model in order to analyze the effects a number of structural, managerial, and environmental factors may have on a hospital’s efficiency. The results indicated that most non-specialty hospitals in the state are operating away from the efficient production frontier. The results also indicate that the structural make up, managerial choices, and level of competition Florida hospitals face have an impact on their overall technical efficiency.

Eficiência e concentração na indústria bancária

O objectivo deste trabalho é a análise da eficiência produtiva e dos efeitos da concentração sobre os custos bancários, tendo por base a indústria bancária portuguesa. O carácter multiproduto da empresa bancária sugere a necessidade de se adoptar formas multiproduto da função custo (tipo Fourier). Introduzimos variáveis de homogeneidade e de estrutura que permitem o recurso a formas funcionais uniproduto (Cobb-Douglas) à banca. A amostra corresponde a 22 bancos que operavam em Portugal entre 1995-2001, base não consolidada e dados em painel. Para o estudo da ineficiência recorreu-se ao modelo estocástico da curva fronteira (SFA), para as duas especificações. Na análise da concentração, introduziram-se variáveis binárias que pretendem captar os efeitos durante quatro anos após a concentração. Tanto no caso da SFA como no da concentração, os resultados encontrados são sensíveis à especificação funcional adoptada. Concluindo, o processo de concentração bancário parece justificar-se pela possibilidade da diminuição da ineficiência-X. This study addresses the productive efficiency and the effects of concentration over the banking costs, stressing its focus on the Portuguese banking market. The multiproduct character of the banking firm suggests the use of functional forms as Fourier. The introduction of variables of structure and of homogeneity allows the association of the banking activity (multiproduct) with a single product function (Cobb-Douglas type). The sample covers 22 banks which operated in Portugal from 1995-2001, non consolidated base with a panel data structure. The study about inefficiency is elaborated through the stochastic frontier model (SFA), for the two specifications selected. As a methodology to analyze the concentration, we introduced binary variables, which intend to catch the effects through four years after the concentration process. The results obtained, through SFA and concentration approach, are influenced by the kind of specifications selected. Summing up, the concentration process of the Banking Industry sounds to be justified by the possibility of the X-inefficiency.

Efficiency Measures in the Agricultural Sector: The Beginning

Copyright © 2013 Springer Netherlands.

Efficiency Measures in the Agricultural Sector: With Applications

Copyright 2013 Springer Netherlands.

Eficiência e concentração na indústria bancária

O objectivo deste trabalho é a análise da eficiência produtiva e dos efeitos da concentração sobre os custos bancários, tendo por base a indústria bancária portuguesa. O carácter multiproduto da empresa bancária sugere a necessidade de se adoptar formas multiproduto da função custo (tipo Fourier). Introduzimos variáveis de homogeneidade e de estrutura que permitem o recurso a formas funcionais uniproduto (Cobb-Douglas) à banca. A amostra corresponde a 22 bancos que operavam em Portugal entre 1995-2001, base não consolidada e dados em painel. Para o estudo da ineficiência recorreu-se ao modelo estocástico da curva fronteira (SFA), para as duas especificações. Na análise da concentração, introduziram-se variáveis binárias que pretendem captar os efeitos durante quatro anos após a concentração. Tanto no caso da SFA como no da concentração, os resultados encontrados são sensíveis à especificação funcional adoptada. Concluindo, o processo de concentração bancário parece justificar-se pela possibilidade da diminuição da ineficiência-X.

Benchmarking in primary health care: An application of the stochasticd frontier analysis and the grades of membership approach to Portuguese family health units

A Work Project, presented as part of the requirements for the Award of a Masters Degree in Economics from the NOVA – School of Business and Economics

Cooperative production and efficiency

We characterize the sharing rule for which a contribution mechanism achieves efficiency in a cooperative production setting when agents are heterogeneous. The sharing rule bears no resemblance to those considered by the previous literature. We also show for a large class of sharing rules that if Nash equilibrium yields efficient allocations, the production function displays constant returns to scale, a case in which cooperation in production is useless.

Production risk, pesticide use and GM crop technology in South Africa

Technology involving genetic modification of crops has the potential to make a contribution to rural poverty reduction in many developing countries. Thus far, pesticide-producing Bacillus thuringensis (Bt) varieties of cotton have been the main GM crops under cultivation in developing nations. Several studies have evaluated the farm-level performance of Bt varieties in comparison to conventional ones by estimating production technology, and have mostly found Bt technology to be very successful in raising output and/or reducing pesticide input. However, the production risk properties of this technology have not been studied, although they are likely to be important to risk-averse smallholders. This study investigates the output risk aspects of Bt technology by estimating two 'flexible risk' production function models allowing technology to independently affect the mean and higher moments of output. The first is the popular Just-Pope model and the second is a more general 'damage control' flexible risk model. The models are applied to cross-sectional data on South African smallholders, some of whom used Bt varieties. The results show no evidence that a 'risk-reduction' claim can be made for Bt technology. Indeed, there is some evidence to support the notion that the technology increases output risk, implying that simple (expected) profit computations used in past evaluations may overstate true benefits.

Output risk aspects of genetically modified crop technology in South Africa

Technology involving genetic modification of crops has the potential to make a contribution to rural poverty reduction in many developing countries. Thus far, insecticide-producing 'Bt' varieties of cotton have been the main GM crops under cultivation in developing nations. Several studies have evaluated the farm-level performance of Bt varieties in comparison to conventional ones by estimating production technology, and have mostly found Bt technology to be very successful in raising output and/or reducing insecticide input. However, the production risk properties of this technology have not been studied, although they are likely to be important to risk-averse smallholders. This study investigates the output risk aspects of Bt technology using a three-year farm-level dataset on smallholder cotton production in Makhathini flats, Kwa-Zulu Natal, South Africa. Stochastic dominance and stochastic production function estimation methods are used to examine the risk properties of the two technologies. Results indicate that Bt technology increases output risk by being most effective when crop growth conditions are good, but being less effective when conditions are less favourable. However, in spite of its risk increasing effect, the mean output performance of Bt cotton is good enough to make it preferable to conventional technology even for risk-averse smallholders.

Production risk, pesticide use and GM crop technology in South Africa

Technology involving genetic modification of crops has the potential to make a contribution to rural poverty reduction in many developing countries. Thus far, pesticide-producing Bacillus thuringensis (Bt) varieties of cotton have been the main GM crops under cultivation in developing nations. Several studies have evaluated the farm-level performance of Bt varieties in comparison to conventional ones by estimating production technology, and have mostly found Bt technology to be very successful in raising output and/or reducing pesticide input. However, the production risk properties of this technology have not been studied, although they are likely to be important to risk-averse smallholders. This study investigates the output risk aspects of Bt technology by estimating two 'flexible risk' production function models allowing technology to independently affect the mean and higher moments of output. The first is the popular Just-Pope model and the second is a more general 'damage control' flexible risk model. The models are applied to cross-sectional data on South African smallholders, some of whom used Bt varieties. The results show no evidence that a 'risk-reduction' claim can be made for Bt technology. Indeed, there is some evidence to support the notion that the technology increases output risk, implying that simple (expected) profit computations used in past evaluations may overstate true benefits.

Tropospheric ozone and winter wheat production in England and Wales: A note

Tropospheric ozone is an air pollutant thought to reduce crop yields across Europe. Much experimental scientific work has been completed or is currently underway to quantify yield effects at ambient ozone levels. In this research, we seek to directly evaluate whether such effects are observed at the farm level. This is done by intersecting a farm level panel dataset for winter wheat farms in England & Wales with information on ambient ozone, and estimating a production function with ozone as a fixed input. Panel data methods, Generalised Method of Moments (GMM) techniques and nested exogeneity tests are employed in the estimation. The results confirm a small, but nevertheless statistically significant negative effect of ambient ozone levels on wheat yields.

Testing production functions used in empirical growth studies

We estimate and test two alternative functional forms, which have been used in the growth literature, representing the aggregate production function for a panel of countries: the model of Mankiw, Romer and Weil (Quarterly Journal of Economics, 1992), and a mincerian formulation of schooling-returns to skills. Estimation is performed using instrumental-variable techniques, and both functional forms are confronted using a Box-Cox test, since human capital inputs enter in levels in the mincerian specification and in logs in the extended neoclassical growth model.

Testing production functions used in empirical growth studies

We estimate and test two alternative functional forms representing the aggregate production function for a panel of countries: the extended neoclassical growth model, and a mincerian formulation of schooling-returns to skills. Estimation is performed using instrumentalvariable techniques, and both functional forms are confronted using a Box-Cox test, since human capital inputs enter in levels in the mincerian specification and in logs in the extended neoclassical growth model. Our evidence rejects the extended neoclassical growth model in favor of the mincerian specification, with an estimated capital share of about 42%, a marginal return to education of about 7.5% per year, and an estimated productivity growth of about 1.4% per year. Differences in productivity cannot be disregarded as an explanation of why output per worker varies so much across countries: a variance decomposition exercise shows that productivity alone explains 54% of the variation in output per worker across countries.

Três ensaios sobre o gasto local no Brasil: descentralização, eficiência e voto

Partindo de uma avaliação sobre o contexto mundial de descentralização fiscal e de democratização em que o Brasil se encontrava no final do século XX, essa tese apresenta na primeira parte uma análise empírica para países em desenvolvimento evidenciando o condicionamento do tipo de regime de governo na relação entre descentralização fiscal e tamanho de governo. Estimações por system-GMM para países em desenvolvimento mostram que existe um nível de descentralização fiscal, entre 20% e 30%, que uma vez superado, resulta em democracias com tamanhos de governos menores do que as ditaduras. Esses resultado, que chama a atenção tanto para os governos locais, como para a influência da democracia no gasto público, estimulou a continuação da pesquisa na avaliação da eficiência dos gastos municipais no Brasil e sua relação com o voto. Assim, no segundo ensaio, são calculados indicadores de evolução da eficiência e da produtividade do gasto municipal (fatores de Malmquist) entre 2004 e 2008, para as áreas da saúde e educação. Os resultados da análise por fronteira estocástica mostram que tanto na educação, como na saúde, houve avanços na fronteira de produção (TFPC, em média, de 18.7%, na educação e de 14.2% na saúde) por avanços de mudança técnica (Technical Change - TC), ao invés de elevação da eficiência (Technical Efficiency Change – TEC). No último ensaio, os indicadores de eficiência e de produtividade são usados para testar a hipótese de que o eleitor municipal premia com o voto os prefeitos que melhoraram a eficiência do gasto da educação e/ou saúde em sua gestão. Os resultados não rejeitam a hipótese para a educação, mas rejeitam para a saúde. A fim de tratar prováveis erros de medida das variáveis de produtividade, as estimações são instrumentalizadas em regressões por dois estágios.