Technical terms in fishing gear materials and gear fabrication

Papers dealing with technical terms in fisheries science are few. This paper however, covers only one or two aspects of the subject, namely fishing gear materials and fishing gear fabrication. Similar papers on other aspects are also planned. Short explanations or descriptions are also given wherever considered necessary.

A preliminary account and review of the simple methods for determining the operational parameters of fishing gear, underwater, with notes on its application

An account and review of the simple methods for determining the operational parameters of fishing gear, underwater, such a tilt of otter boards (outwards or inwards, forwards or afterwards), vertical height of net, its horizontal spread, angle of divergence at bosom, spread between wing tips, angle of inclination of danlenos, butterfly, slope of legs and sweep-line has been given. The relationship of distance between the otter boards spread and the vertical height of net has been obtained as generally linear. The possibilities of regulating the vertical height of net (dependent variate) and spread of otter boards (independent variate) for increasing the fishing efficiency has been discussed. The angle of attack of oval shaped otter boards used during the operations still remain undetermined, however, it has been explained how the best angle of attack for increasing the efficiency of gear can be obtained by regulating the ratio of depth to warp for a given net. The inadequacy of the mere indices of catch per hour of trawling in comparing the relative efficiency of trawls in gear research studies has been indicated. The importance of estimating the operational parameters and its application to commercial fisheries depending upon the distribution pattern of fish and in gear research has been discussed. The efficiency of the jelly bottle method has been compared statistically with the observations made on the trawl gear underwater with instruments.

Fishing gear and methods of the river Brahmaputra in Assam

Potentially the inland fishery resources of the country are of very high order. But the present level of their exploitation is far from optimum, mainly because of the inadequacies of the existing fishing gear and methods. There is vast scope for increasing the fish production from inland waters by improving the existing gear and methods. This would require a thorough study of the fishing gear and methods in vogue, of which very little is known at present. In the present communication the authors discuss the fishing gear and methods of the river Brahmaputra, in Assam, based on a survey carried out by them during January-February 1964. The survey covers a 640 km stretch of the Brahmaputra River, its important tributaries and connected bheels, from Dhubri to Dibrugarh. As a result of the survey about 19 types of fishing nets, which could be grouped into eight classes, were identified. The salient technological features of the gears and their methods of operation are discussed class-wise. The characteristics of the individual types are shown in tables. The materials used for gear and gear accessories, are briefly discussed. The classification and relative importance of different types of gear are examined. Besides, the influence of the ecological and topographical features of the river on the development of different types of fishing gears, is also discussed.

Mechanization of fishing craft and the use of improved fishing gear

Since the year 1925, attention has been focused periodically on the stagnation in the local fishing industry, and those who have studied the subject have been unanimous about the need to introduce modern fishing craft which are capable of working more fishing gear. This report outlines the stages through which the evolution of more effective fishing operations has progressed, both in the gradually increasing use of mechanical propulsion for boats and in the adoption of more modern gear and techniques by local fishermen. No reference is made in this report to the operation of deep-sea trawlers (Sivalingam, 1956) a phase of development which has hitherto not influenced the local fishing industry to any appreciable extent.

Fishing gear research at the Central Institute of Fisheries Technology

The Craft and Gear Wing of the Central Institute of Fisheries Technology was established to develop the country's fishing boats and implements scientifically and systematically. The Wing was organized in the year 1957 as a part of the fisheries development schemes included under the Second Five Year Plan.

Instrumentation in fishing gear research

The general method of study of the performance of any dynamic system is to have an understanding of the various influencing factors. These include the dynamic parameters developed by the system as well as the external factors. In the case of a trawl net under operation there are many hydrodynamic forces acting on it. Since the trawl net is operated much below the water surface, visual observation is rather difficult. Model testing is an alternative method. However, as a model cannot be an exact replica of the original in all respects, model testing has only a limited application and an ultimate test with the actual gear in the true field conditions is necessary.

Sirahu Valai: a passive fishing gear in Ceylon

There are many types of passive fishing gear in use in the estuarine waters and lagoons in Ceylon such as the stake seine net or Kattudel, the tat trap or Jalcottu and the wing net or Sirahu valai. Of these Siraku valai is very popular in the shallow and near shore areas of the sea in north Ceylon. Sirahu valai is popular since it is relatively more economical, less time consuming and more efficient than other forms of fishing gear in shallow waters. More over the fishermen do not have to remain in the fishing grounds while his gear is fishing. Pearson (1923) described this gear as a stake net having a complicated arrangement. Sirahu valai is also referred to as Siraku valai or Kurukku valai.

Fishing gear and methods for off-shore fishing in Sri Lanka

The author describes the commercial viable off-shore fishing methods for catching known commercial resources available around Sri Lanka. He also describes the in-shore fishing methods such as bait fishery which are related and of prime importance for carrying out certain off-shore methods. The paper is intended as a background for the description of fishing methods. The methods discussed are: (1) Longlining for large pelagic species such as large tuna (yellow fin, big eye), shark, spearfish and others; (2) Drift-netting for small and large tuna species (skipjack, yellow fin and others), shark, spearfish, etc.; (3) Pole and line for all deep-sea pelagic species such as skipjack, yellow fin, frigate mackerel, etc.; and (4) Purse seining (small scale) for small pelagic species suitable as bait fish for pole and line and longline fisheries.

Challenges to effective fishing and preferred fishing gear in a hydrodynamic freshwater system

Challenges to fishing and preferred gear of multiple used Lake, whose water depth is controlled by opening of its dam gate were investigated. Geographic survey, interview and focused group discussion of fishermen were used to assess factors influencing effectiveness of fishing and the preferred gear of Asejire Lake. Water usage (s) such as frequency of Complete and Partial Opening of Dams Gate (CODG and PODG) were investigated as indices for hydrodynamic condition. Response during focused group discussion with about 33% of fishermen of the Lake were obtained on sources of disturbance to effective fishing (SDEF), most effective gear (MEG)- least environmentally perturbed gear, comparability of catch structure of preferred gear to conventional gear and sustainability of superiority of preferred gears in situations outside hydrodynamic condition (SSPPG). The PODG occurred 1-7times/Month-dry season, 15-18times/Month-wet season; CODG occurred 1-2times/Month in both season; Interval of CODG was 3-17 and 5-12days (dry and wet season). It affected set-net and catch. The SDEF were gear availability, weather condition, dam’s gate opening, religion activities and Health of fisher-folks. 50% respondents accepted opening of dams gate as most important disturbance while religion was least (5% respondents accepted). 60% respondents accepted traps as MEG being the least affected while 75% respondents accepted Gura cage trap as the MEG among traps.90% respondents accepted that among traps, its catch structure was closest (comparable) to conventional gear. However, 75% respondents rejected SSPPG. Opening of dams’ gate creates hydrodynamic condition and it affects fishing. Gura trap was preferred for fishing hydrodynamic condition.

Fishing gear in freshwater reservoirs of India

Consequent on the great emphasis given to irrigation, power generation and flood control, several river valley reservoirs have been formed. The fact that these reservoirs support a fairly rich fishery potential needs no special mention. The total reservoir water area in the country is 6.4 lakh h.a. (16 lakh acres) and the yield is 5 to 8 kgm/h. a. in certain reservoirs, rising up to 40 kgm/h.a. in some of the highly productive ones.

Synthetic fibres for fishing gear

A variety of synthetic fibres are at present in use as fishing gear material, the earliest one being the polyvinyl chloride group introduced for traps in 1936 (von. Brandt 1957). Since then synthetic fibres became increasingly popular among the advanced fishing nations of the world. The latest synthetic fibre which has been successfully used in fishing is polypropylene developed in Italy in 1954.

Mesh regulation in backwater prawn fishing gear

Size grade composition of different species of prawn caught by various back water fishing gear have been enumerated. 57 to 75% of P. indicus captured was less than 10 cm in length. M. dobsoni and M. monoceros captured were less than 10 cm in length. A cod end mesh size of 20-25 mm has been recommended for stake nets for the capture of P. indicus of 10 cm length along with other species.

A demersal trawling gear for inshore waters along the west coast

Results of comprehensive efficiency tests of three tested designs of 15m bulged belly, 15.8m six seam and 29.26m longwing type trawls in combination with 114x57cm both rectangular flat and horizontal curved wooden otter boards are reported. Of the possible six combinations, the bulged-belly trawl with flat rectangular otter boards has performed better in landing prawns. Further this study has indicated the selective action of the different designs.