990 resultados para Spatial Variations
Resumo:
The solar and longwave environmental irradiance geometry (SOLWEIG) model simulates spatial variations of 3-D radiation fluxes and mean radiant temperature (T mrt) as well as shadow patterns in complex urban settings. In this paper, a new vegetation scheme is included in SOLWEIG and evaluated. The new shadow casting algorithm for complex vegetation structures makes it possible to obtain continuous images of shadow patterns and sky view factors taking both buildings and vegetation into account. For the calculation of 3-D radiation fluxes and T mrt, SOLWEIG only requires a limited number of inputs, such as global shortwave radiation, air temperature, relative humidity, geographical information (latitude, longitude and elevation) and urban geometry represented by high-resolution ground and building digital elevation models (DEM). Trees and bushes are represented by separate DEMs. The model is evaluated using 5 days of integral radiation measurements at two sites within a square surrounded by low-rise buildings and vegetation in Göteborg, Sweden (57°N). There is good agreement between modelled and observed values of T mrt, with an overall correspondence of R 2 = 0.91 (p < 0.01, RMSE = 3.1 K). A small overestimation of T mrt is found at locations shadowed by vegetation. Given this good performance a number of suggestions for future development are identified for applications which include for human comfort, building design, planning and evaluation of instrument exposure.
Resumo:
The Bollène-2002 Experiment was aimed at developing the use of a radar volume-scanning strategy for conducting radar rainfall estimations in the mountainous regions of France. A developmental radar processing system, called Traitements Régionalisés et Adaptatifs de Données Radar pour l’Hydrologie (Regionalized and Adaptive Radar Data Processing for Hydrological Applications), has been built and several algorithms were specifically produced as part of this project. These algorithms include 1) a clutter identification technique based on the pulse-to-pulse variability of reflectivity Z for noncoherent radar, 2) a coupled procedure for determining a rain partition between convective and widespread rainfall R and the associated normalized vertical profiles of reflectivity, and 3) a method for calculating reflectivity at ground level from reflectivities measured aloft. Several radar processing strategies, including nonadaptive, time-adaptive, and space–time-adaptive variants, have been implemented to assess the performance of these new algorithms. Reference rainfall data were derived from a careful analysis of rain gauge datasets furnished by the Cévennes–Vivarais Mediterranean Hydrometeorological Observatory. The assessment criteria for five intense and long-lasting Mediterranean rain events have proven that good quantitative precipitation estimates can be obtained from radar data alone within 100-km range by using well-sited, well-maintained radar systems and sophisticated, physically based data-processing systems. The basic requirements entail performing accurate electronic calibration and stability verification, determining the radar detection domain, achieving efficient clutter elimination, and capturing the vertical structure(s) of reflectivity for the target event. Radar performance was shown to depend on type of rainfall, with better results obtained with deep convective rain systems (Nash coefficients of roughly 0.90 for point radar–rain gauge comparisons at the event time step), as opposed to shallow convective and frontal rain systems (Nash coefficients in the 0.6–0.8 range). In comparison with time-adaptive strategies, the space–time-adaptive strategy yields a very significant reduction in the radar–rain gauge bias while the level of scatter remains basically unchanged. Because the Z–R relationships have not been optimized in this study, results are attributed to an improved processing of spatial variations in the vertical profile of reflectivity. The two main recommendations for future work consist of adapting the rain separation method for radar network operations and documenting Z–R relationships conditional on rainfall type.
Resumo:
Long term meteorological records (> 100 years) from stations associated with villages are generally classified as rural and assumed to have no urban influence. Using networks installed in two European villages, the local and microclimatic variations around two of these rural-village sites are examined. An annual average temperature difference ($\Delta{T}$) of 0.6 and 0.4 K was observed between the built-up village area and the current meteorological station in Geisenheim (Germany) and Haparanda (Sweden), respectively. Considerably larger values were recorded for the minimum temperatures and during summer. The spatial variations in temperature within the villages are of the same order as recorded over the past 100+ years in these villages (0.06 to 0.17 K/10 years). This suggests that the potential biases in the long records of rural-villages also warrant careful consideration like those of the more commonly studied large urban areas effects.
Resumo:
Field observations of new particle formation and the subsequent particle growth are typically only possible at a fixed measurement location, and hence do not follow the temporal evolution of an air parcel in a Lagrangian sense. Standard analysis for determining formation and growth rates requires that the time-dependent formation rate and growth rate of the particles are spatially invariant; air parcel advection means that the observed temporal evolution of the particle size distribution at a fixed measurement location may not represent the true evolution if there are spatial variations in the formation and growth rates. Here we present a zero-dimensional aerosol box model coupled with one-dimensional atmospheric flow to describe the impact of advection on the evolution of simulated new particle formation events. Wind speed, particle formation rates and growth rates are input parameters that can vary as a function of time and location, using wind speed to connect location to time. The output simulates measurements at a fixed location; formation and growth rates of the particle mode can then be calculated from the simulated observations at a stationary point for different scenarios and be compared with the ‘true’ input parameters. Hence, we can investigate how spatial variations in the formation and growth rates of new particles would appear in observations of particle number size distributions at a fixed measurement site. We show that the particle size distribution and growth rate at a fixed location is dependent on the formation and growth parameters upwind, even if local conditions do not vary. We also show that different input parameters used may result in very similar simulated measurements. Erroneous interpretation of observations in terms of particle formation and growth rates, and the time span and areal extent of new particle formation, is possible if the spatial effects are not accounted for.
Resumo:
P>Estimates of effective elastic thickness (T(e)) for the western portion of the South American Plate using, independently, forward flexural modelling and coherence analysis, suggest different thermomechanical properties for the same continental lithosphere. We present a review of these T(e) estimates and carry out a critical reappraisal using a common methodology of 3-D finite element method to solve a differential equation for the bending of a thin elastic plate. The finite element flexural model incorporates lateral variations of T(e) and the Andes topography as the load. Three T(e) maps for the entire Andes were analysed: Stewart & Watts (1997), Tassara et al. (2007) and Perez-Gussinye et al. (2007). The predicted flexural deformation obtained for each T(e) map was compared with the depth to the base of the foreland basin sequence. Likewise, the gravity effect of flexurally induced crust-mantle deformation was compared with the observed Bouguer gravity. T(e) estimates using forward flexural modelling by Stewart & Watts (1997) better predict the geological and gravity data for most of the Andean system, particularly in the Central Andes, where T(e) ranges from greater than 70 km in the sub-Andes to less than 15 km under the Andes Cordillera. The misfit between the calculated and observed foreland basin subsidence and the gravity anomaly for the Maranon basin in Peru and the Bermejo basin in Argentina, regardless of the assumed T(e) map, may be due to a dynamic topography component associated with the shallow subduction of the Nazca Plate beneath the Andes at these latitudes.
Resumo:
Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)
Resumo:
O objetivo deste trabalho foi estudar a influência das superfícies geomórficas na variação espacial da perda de solo por erosão na região de Pereira Barreto, São Paulo (SP). Os solos foram amostrados nos pontos de cruzamento de uma malha, georreferenciados, com intervalos de 350m, na profundidade de 0,0-0,2m, totalizando 67 pontos. Foram feitas determinações da composição granulométrica e do conteúdo de matéria orgânica. Foram avaliados os fatores de erosão locais, tais como erosividade (R), erodibilidade (K), fator topográfico (LS), uso e manejo (C), práticas conservacionistas (P), potencial natural de erosão (PNE), perda de solo com e sem práticas conservacionistas (A e *A), tolerância de perda de solo (T) e risco de erosão (RE). As variáveis A, PNE e RE apresentaram forte correlação espacial com o fator topográfico (LS), indicando a forte relação do relevo sobre os fatores de erosão. As perdas de solo (A e *A) apresentaram comportamento coerente com a conceituação de superfícies geomórficas, evidenciando as relações de dependência do processo erosivo do solo aos ambientes geomórficos.
Resumo:
This study sprang from the hypothesis that spatial variations in the morbidity rate for dengue fever within the municipality of Natal are related to intra-city socioeconomic and environmental variations. The objective of the project was to classify the different suburbs of Natal according to their living conditions and establish if there was any correlation between this classification and the incidence rate for dengue fever, with the aim of enabling public health planners to better control this disease. Data on population density, access to safe drinking water, rubbish collection, sewage disposal facilities, income level, education and the incidence of dengue fever during the years 2001 and 2003 was drawn from the Brazilian Demographic Census 2000 and from the Reportable Disease Notification System -SINAN. The study is presented here in the form of two papers, corresponding to the types of analysis performed: a classification of the urban districts into quartiles according to the living conditions which exist there, in the first article; and the incidence of dengue fever in each of these quartiles, in the second. By applying factorial analysis to the chosen socioeconomic and environmental indicators for the year 2000, a compound index of living condition (ICV) was obtained. On the basis of this index, it was possible to classify the urban districts into quartiles. On undertaking this grouping (paper 1), a heterogeneous distribution of living conditions was found across the city. As to the incidence rate for dengue fever (paper 2), it was discovered that the quartile identified as having the best living conditions presented incidence rates of 15.62 and 15.24 per 1000 inhabitants respectively in the years 2001 and 2003; whereas the quartile representing worst living conditions showed incidence rates of 25.10 and 10.32 for the comparable periods. The results suggest that dengue fever occurs in all social classes, and that its incidence is not related in any evident way to the chosen formula for living conditions
Resumo:
The aim of the present study was to examine the benthic fauna in a marginal pond lateral to the Paranapanema River and to identify the main controlling factors of its distribution. Considering the small size of the lacustrine ecosystem, we expected that seasonal variations of the benthic community attributes are more important than spatial variations; Methods: Two samplings, one in March and another in August, were carried out at nine sites in the pond. Sediment samples were obtained through a Van Veen grab for invertebrate sorting, granulometric analysis, and for quantification of organic matter in sediment. Other abiotic factors were measured, such as water transparency, dissolved oxygen, pH, electric conductivity, temperature, and depth of sediment sampling sites. Regarding the comparative analysis at spatial scale, no significant variations in density of the benthic invertebrate community were found. Results: In relation to the studied abiotic factors, only depth presented significant differences among sampling sites; All the measured environmental parameters presented significant differences among sampling months, except depth and the physical and chemical characteristics of the sediment. The abundance of Chaoboridae and Chironomidae was the unique attribute with a significant difference in comparing the two months. A higher abundance of taxa occurred in August, especially for Oligochaeta, Nematoda, Chaoboridae, and Chironomidae; Conclusions: Because of the low structural complexity of the studied pond, we concluded that the changes in benthic macroinvertebrate community attributes were mainly due to seasonal effects.
Resumo:
Sedimentation rates of particulate material and some physicochemical parameters of water were determined in October, January, April and July 1990-91 at seven stations in the Jurumirim Reservoir (São Paulo, Brazil), three located in the Paranapanema arm, three in the Taquari arm and one near the dam. Higher sedimentation rates of tripton were found in the Paranapanema arm, followed by those from the Taquari arm and the dam. Suspended matter (2.5-48.7 mg · 1-1) and chlorophyll-a (0.7-8.1 mg · m-3) concentrations in the Paranapanema arm were in general higher resulting in lower water transparency (0.3-1.7m) than in the Taquari arm. Temporal and spatial variations in the tripton sedimentation rates were mainly influenced by allochthonous input at the stations near the river mouth. The settling fluxes at station near the dam of the reservoir were affected rather by a small autochthonous production (65 g C ass m-2 ;yr-1), indicated by a higher organic content (64-87%). Therefore, sedimentation rates measured by bottom traps were affected by sediment ressuspension especially at isothermal conditions. With respect to sedimentation, the riverine, the transition and the lacustrine zones commonly found in reservoires could be distinguished. The extent of the riverine zone in each arm of the Jurumirim Reservoir depends on the seasonal change of allochthonous input.
Resumo:
Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)
Resumo:
Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
As associações macrobentonicas estuarinas de regiões costeiras amazônicas foram caracterizadas usando diferentes aberturas de malha e profundidades de amostragem. As amostragens aconteceram na ilha de Algodoal e península de Ajuruteua (PA), nos períodos chuvoso e seco (junho e dezembro de 2007, respectivamente), nos habitats borda do mangue, mangue, areno-lamoso e arenoso. Em cada habitat foram coletadas oito amostras biológicas, utilizando tubo cilíndrico de 0,0079 m², assim como amostras para caracterização do substrato (textura, umidade e concentrações de matéria orgânica), e concentrações de clorofila a e feopigmentos. Cada amostra biológica foi dividida em três estratos (0-5, 5-10 e 10-20 cm), sendo cada estrato peneirado em malhas de 1,0, 0,5, 0,3 e 0,25 mm de abertura. Foram utilizadas técnicas univariadas (ANOVA) e multivariadas (MDS, ANOSIM, SIMPER e BIOENV) para a analise dos dados. A macrofauna foi composta por 68 táxons com dominância de Annelida (Tubificidae e Capitellidae). As malhas de 0,3 e 0,25 mm foram as mais eficientes na retenção de organismos e espécies, enquanto a malha de 1,0 mm perdeu quantidades significativas de organismos, sobretudo de Tubificidae. As amostras coletadas a 10 e 20 cm de profundidade não diferiram significativamente quanto numero de táxons e organismos. Foram observadas variações espaciais significativas na estrutura da macrofauna entre habitats em ambos os locais e ocasiões de amostragem, com densidade e riqueza superiores nos habitats lamosos. As variáveis ambientais mais correlacionas com a fauna foram a quantidade de argila, a concentração orgânica e o teor de umidade nos sedimentos. Foi possível concluir que: 1. A fauna bentônica na ilha de Algodoal e península de Ajuruteua foi composta por poucos táxons, sendo eles tipicamente estuarinas e de pequenas dimensões, dominada por Annelida; 2. para a caracterização da macrofauna bentônica e necessário a tomada de amostras somente ate a profundidade de 10 cm de sedimento e o peneiramento em malha de 0,3 mm de abertura; 3. os habitats lamosos tiveram geralmente maiores densidades e riqueza; 4. apenas na ilha de Algodoal se observou variação temporal na estrutura da macrofauna; 5. a quantidade de argila, feopigmentos e teor de umidade nos sedimentos foram os principais fatores responsáveis pela estruturação da fauna.
Resumo:
O estudo de comunidades de peixes estuarinos tem recebido a atenção de pesquisadores, pelo fato destes ecossistemas apresentarem uma grande variedade e abundância de peixes. Muitas destas espécies possuem interesse comercial, constituido-se numa ferramenta fundamental para a avaliação dos estoques pesqueiros, contribuindo também para a conservação dos ambientes estuarinos e costeiros. O estuário do rio Curuçá localiza-se na costa norte, região do salgado paraense, apesar da pesca ser a principal atividade econômica das cidades da região, existem poucos estudos a respeito da ictiofauna local. O objetivo principal deste trabalho foi de caracterizar a ictiofauna demersal dos canais principais do estuário do rio Curuçá, identificando as variações anuais e espaciais na composição, densidade e biomassa, bem como os fatores abióticos que influenciam nestas variações. Para isto, foram realizadas coletas bimestrais, utilizando uma rede de arrasto de fundo, nos dois canais principais do estuário. Ao final do estudo foram capturados 18.989 indivíduos, pertecentes a 73 espécies, destas Ophichthus cylindroideus, Hippocampus reidi, Sygnathus pelagicus e Butis koilomatodon ainda não haviam sido registradas para a costa norte. As famílias Sciaenidae, Engraulidae e Ariidae, foram as mais representativas em número de espécies, densidade e biomassa, dominando as capturas. As 20 espécies classificadas como estuarinas foram a maioria, e apresentaram as maiores densidades e biomassa em todos os meses e estações de coleta. A densidade média (0,12 ind/m²) foi significativamente maior na estação chuvosa, já para a biomassa (1,11 g/m²) não houve diferenças significativas entre os meses de coleta. Entre os perfis, Curuçá apresentou uma maior riqueza de espécies, densidade e biomassa. Esta diferença está relacionada principalmente a uma maior heterogenidade de substratos deste perfil, fazendo com que este possua uma maior disponibilidade de microhabitat. Os parâmetros físicos-químicos da água se apresentaram homogêneos ao longo dos pontos de coletas tendo pouca influência sobre a distribuição espacial da ictiofauna. O fato de encontrarmos novos registros de espécies para a região, reforça a importância de novos estudos para uma maior compreensão da ictiofauna local, que é um importante recurso econômico para as populações locais.