The use of non-reflecting boundary conditions in soil dynamics

In this paper some aspects of the use of non-reflecting boundaries in dynamic problems, analyzed in time domain, are considered. Current trends for treating the above mentioned problems are summarized with a particular emphasis on the use of numerical techniques, such as Boundary Element Method (BEM) or mixed and hybrid formulations, Finite Element Method (FEM) plus BEM. As an alternative to these methods, an easy time domain boundary condition, obtained from the well known consistent transmitting boundary developed by Waas for frequency domain analysis, can be applied to represent the reactions of the unbounded soil on the interest zone. The behaviour of this proposed boundary condition is studied when waves of different frequency to the one used for its obtention are acting on the physical edge of the model. As an application example,an analysis is made of the soil-structure interaction of a rigid strip foundation on a horizontal non-linear elastic layer on bed rock. The results obtained suggest the need of time domain solutions for this type of problem

Effects of soil management in vineyard on soil physical and chemical characteristics

Cover crops in Mediterranean vineyards are scarcely used due to water competition between the cover crop and the grapevine; however, bare soil management through tillage or herbicides tends to have negative effects on the soil over time (organic matter decrease, soil structure and soil fertility degradation, compaction, etc). The objective of this study was to understand how soil management affects soil fertility, compaction and infiltration over time. To this end, two bare soil techniques were compared, tillage (TT) and total herbicide (HT) with two cover crops; annual cereal (CT) and annual grass (AGT), established for 8 years. CT treatment showed the highest organic matter content, having the biggest amount of biomass incorporated into the soil. The annual adventitious vegetation in TT treatment (568 kg dry matter ha-1) that was incorporated into the soil, kept the organic matter content higher than HT levels and close to AGT level, in spite of the greater aboveground annual biomass production of this treatment (3632 kg dry matter ha-1) whereas only its roots were incorporated into the soil. TT presented the highest bulk density under the tractor track lines and a greatest resistance to penetration (at 0.2 m depth). AGT presented bulk density values (upper 0.4 m) lower than TT and penetration resistance in CT lower (at 0.20 m depth) than TT too. Effects of soil management in vineyard on soil physical and chemical characteristics - ResearchGate. Available from: http://www.researchgate.net/publication/268520480_Effects_of_soil_management_in_vineyard_on_soil_physical_and_chemical_characteristics [accessed May 20, 2015].

Volume, Surface, Connectivity and Size Distribution of Soil Pore Space in CT Images: Comparison of Samples at Different Depths from Nearby Natural and Tillage Areas

The study of soil structure, i.e., the pores, is of vital importance in different fields of science and technology. Total pore volume (porosity), pore surface, pore connectivity and pore size distribution are some (probably the most important) of the geometric measurements of pore space. The technology of X-ray computed tomography allows us to obtain 3D images of the inside of a soil sample enabling study of the pores without disturbing the samples. In this work we performed a set of geometrical measures, some of them from mathematical morphology, to assess and quantify any possible difference that tillage may have caused on the soil. We compared samples from tilled soil with samples from a soil with natural vegetation taken in a very close area. Our results show that the main differences between these two groups of samples are total surface area and pore connectivity per unit pore volume.

Morphological Functions with Parallel Sets for the Pore Space of X-ray CT Images of Soil Columns

During the last few decades, new imaging techniques like X-ray computed tomography have made available rich and detailed information of the spatial arrangement of soil constituents, usually referred to as soil structure. Mathematical morphology provides a plethora of mathematical techniques to analyze and parameterize the geometry of soil structure. They provide a guide to design the process from image analysis to the generation of synthetic models of soil structure in order to investigate key features of flow and transport phenomena in soil. In this work, we explore the ability of morphological functions built over Minkowski functionals with parallel sets of the pore space to characterize and quantify pore space geometry of columns of intact soil. These morphological functions seem to discriminate the effects on soil pore space geometry of contrasting management practices in a Mediterranean vineyard, and they provide the first step toward identifying the statistical significance of the observed differences.

Analysis of the problems associated with dynamic interaction between train, track and structure at transition zones

El gran desarrollo experimentado por la alta velocidad en los principales países de la Unión Europea, en los últimos 30 años, hace que este campo haya sido y aún sea uno de los principales referentes en lo que a investigación se refiere. Por otra parte, la aparición del concepto super − alta velocidad hace que la investigación en el campo de la ingeniería ferroviaria siga adquiriendo importancia en los principales centros de investigación de los países en los que se desea implantar este modo de transporte, o en los que habiendo sido ya implantado, se pretenda mejorar. Las premisas de eficacia, eficiencia, seguridad y confort, que este medio de transporte tiene como razón de ser pueden verse comprometidas por diversos factores. Las zonas de transición, definidas en la ingeniería ferroviaria como aquellas secciones en las que se produce un cambio en las condiciones de soporte de la vía, pueden afectar al normal comportamiento para el que fue diseñada la infraestructura, comprometiendo seriamente los estándares de eficiencia en el tiempo de viaje, confort de los pasajeros y aumentando considerablemente los costes de mantenimiento de la vía, si no se toman las medidas oportunas. En esta tesis se realiza un estudio detallado de la zonas de transición, concretamente de aquellas en las que existe una cambio en la rigidez vertical de la vía debido a la presencia de un marco hidráulico. Para realizar dicho estudio se lleva a cabo un análisis numérico de interacción entre el vehículo y la estructura, con un modelo bidimensional de elemento finitos, calibrado experimentalmente, en estado de tensión plana. En este análisis se tiene en cuenta el efecto de las irregularidades de la vía y el comportamiento mecánico de la interfaz suelo-estructura, con el objetivo de reproducir de la forma más real posible el efecto de interacción entre el vehículo, la vía y la estructura. Otros efectos como la influencia de la velocidad del tren y los asientos diferenciales, debidos a deformaciones por consolidación de los terraplenes a ambos lados el marco hidráulico, son también analizados en este trabajo. En esta tesis, los cálculos de interacción se han llevado a cabo en dos fases diferentes. En la primera, se ha considerado una interacción sencilla debida al paso de un bogie de un tren Eurostar. Los cálculos derivados de esta fase se han denominado cálculos a corto plazo. En la segunda, se ha realizado un análisis considerando múltiples pasos de bogie del tren Eurostar, conformando un análisis de degradación en el que se tiene en cuenta, en cada ciclo, la deformación de la capa de balasto. Los cálculos derivados de esta fase, son denominados en el texto como cálculos a largo plazo. Los resultados analizados muestran que la utilización de los denominados elementos de contacto es fundamental cuando se desea estudiar la influencia de asientos diferenciales, especialmente en transiciones terraplén-estructura en las que la cuña de cimentación no llega hasta la base de cimentación de la estructura. Por otra parte, tener en cuenta los asientos del terraplén, es sumamente importante, cuando se desea realizar un análisis de degradación de la vía ya que su influencia en la interacción entre el vehículo y la vía es muy elevada, especialmente para valores altos de velocidad del tren. En cuanto a la influencia de las irregularidades de la vía, en los cálculos efectuados, se revela que su importancia es muy notable, siendo su influencia muy destacada cuanto mayor sea la velocidad del tren. En este punto cabe destacar la diferencia de resultados derivada de la consideración de perfiles de irregularidades de distinta naturaleza. Los resultados provenientes de considerar perfiles artificiales son en general muy elevados, siendo estos más apropiados para realizar estudios de otra índole, como por ejemplo de seguridad al descarrilamiento. Los resultados provenientes de perfiles reales, dados por diferentes Administradores ferroviarios, presentan resultados menos elevados y más propios del problema analizar. Su influencia en la interacción dinámica entre el vehículo y la vía es muy importante, especialmente para velocidades elevadas del tren. Además el fenómeno de degradación conocido como danza de traviesas, asociado a zonas de transición, es muy susceptible a la consideración de irregularidades de la vía, tal y como se desprende de los cálculos efectuados a largo plazo. The major development experienced by high speed in the main countries of the European Union, in the last 30 years, makes railway research one of the main references in the research field. It should also be mentioned that the emergence of the concept superhigh − speed makes research in the field of Railway Engineering continues to gain importance in major research centers in the countries in which this mode of transportation is already implemented or planned to be implemented. The characteristics that this transport has as rationale such as: effectiveness, efficiency, safety and comfort, may be compromised by several factors. The transition zones are defined in railway engineering as a region in which there is an abrupt change of track stiffness. This stiffness variation can affect the normal behavior for which the infrastructure has been designed, seriously compromising efficiency standards in the travel time, passenger comfort and significantly increasing the costs of track maintenance, if appropriate measures are not taken. In this thesis a detailed study of the transition zones has been performed, particularly of those in which there is a change in vertical stiffness of the track due to the presence of a reinforced concrete culvert. To perform such a study a numerical interaction analysis between the vehicle, the track and the structure has been developed. With this purpose a two-dimensional finite element model, experimentally calibrated, in a state of plane stress, has been used. The implemented numerical models have considered the effects of track irregularities and mechanical behavior of soil-structure interface, with the objective of reproducing as accurately as possible the dynamic interaction between the vehicle the track and the structure. Other effects such as the influence of train speed and differential settlement, due to secondary consolidation of the embankments on both sides of culvert, have also been analyzed. In this work, the interaction analysis has been carried out in two different phases. In the first part a simple interaction due to the passage of a bogie of a Eurostar train has been considered. Calculations derived from this phase have been named short-term analysis. In the second part, a multi-load assessment considering an Eurostar train bogie moving along the transition zone, has been performed. The objective here is to simulate a degradation process in which vertical deformation of the ballast layer was considered. Calculations derived from this phase have been named long-term analysis. The analyzed results show that the use of so-called contact elements is essential when one wants to analyze the influence of differential settlements, especially in embankment-structure transitions in which the wedge-shaped backfill does not reach the foundation base of the structure. Moreover, considering embankment settlement is extremely important when it is desired to perform an analysis of track degradation. In these cases the influence on the interaction behaviour between the vehicle and the track is very high, especially for higher values of speed train. Regarding the influence of the track irregularities, this study has proven that the track’s dynamic response is heavily influenced by the irregularity profile and that this influence is more important for higher train velocities. It should also be noted that the difference in results derived from consideration of irregularities profiles of different nature. The results coming from artificial profiles are generally very high, these might be more appropriate in order to study other effects, such as derailment safety. Results from real profiles, given by the monitoring works of different rail Managers, are softer and they fit better to the context of this thesis. The influence of irregularity profiles on the dynamic interaction between the train and the track is very important, especially for high-speeds of the train. Furthermore, the degradation phenomenon known as hanging sleepers, associated with transition zones, is very susceptible to the consideration of track irregularities, as it can be concluded from the long-term analysis.

Amelioration of a degraded acid soil from SW Spain by no-tillage and Ca-amendment

En los suelos, el exceso de acidez lleva asociado deficiencias en ciertos nutrientes y una alta disponibilidad de aluminio, tóxico para los cultivos propios del ambiente mediterráneo. Su laboreo, provoca la pérdida de materia orgánica (MO), deteriora su estructura y reduce la actividad biológica, provocando en última instancia una menor calidad del suelo. Es de esperar pues que cuando se labran suelos ácidos, sus problemáticas particulares tiendan a agravarse. En nuestra zona de estudio, la “raña” de Cañamero (Extremadura, España), predominan los suelos muy ácidos y degradados por un laboreo inadecuado. Las rañas constituyen amplias plataformas casi horizontales, con unos suelos muy viejos (Palexerults), que se caracterizan por tener el complejo de cambio dominado por el aluminio, y un pH ácido que decrece en profundidad. Poseen un potente horizonte Bt rico en arcillas caoliníticas, que propicia que en periodos con exceso de lluvia, se generen capas colgadas de agua cercanas a la superficie. En torno a los años 1940’s estos suelos, que previamente sostenían un alcornocal, o su matorral de sustitución, se pusieron en cultivo. El laboreo aceleró la mineralización de la materia orgánica, agravó los problemas derivados del exceso de acidez y condujo al abandono de los campos cultivados por falta de productividad. Para recuperar la calidad de estos suelos degradados y obtener unos rendimientos compatibles con su uso agrícola es necesario, por un lado, aplicar enmiendas que eleven el pH y reduzcan la toxicidad del aluminio y, por otro, favorecer el incremento en el contenido en MO. En 2005 se implantó en esta raña un ensayo de campo para estudiar la influencia del no laboreo y de la utilización de una enmienda cálcica en parámetros relacionados con la calidad del suelo en un cultivo forrajero. El diseño experimental fue en parcelas divididas con cuatro repeticiones donde el factor principal fue el tipo de laboreo, no laboreo (NL) frente a laboreo convencional (LC), y el factor secundario el uso o no de una enmienda cálcica. La enmienda consistió básicamente en una mezcla de espuma de azucarería y yeso rojo y se incorporó al comienzo del ensayo hasta los 7 cm de profundidad. Desde el comienzo del ensayo el NL influyó positivamente en el contenido de carbono orgánico total (COT) y particulado (COP), mientras que la enmienda tuvo una ligera influencia al principio del ensayo en ambos pero su efecto positivo se desvaneció con el paso del tiempo. Los mayores contenidos en COT y POC se observaron cuando se combinó el NL con la enmienda. La enmienda incrementó con rapidez el pH, y el Ca, y disminuyó el contenido en aluminio hasta una profundidad de 50 cm, incluso en NL, y mejoró ligeramente la agregación del suelo. El NL por sí solo, gracias al aumento en POC, TOC y las proteínas del suelo relacionadas con la glomalina (PSRG), que son capaces de formar compuestos estables no tóxicos con el aluminio, también contribuyó a la reducción de la toxicidad de aluminio en la capa más superficial. Cuando en las campañas con exceso de precipitaciones se generaron capas colgadas de agua próximas a la superficie, el NL generó unas condiciones más favorables para la germinación y desarrollo del cultivo, resultando en una producción más alta que el LC. A ello contribuyó la mayor capacidad de almacenamiento de agua y la mayor transmisividad de esta hacia abajo, en la capa más superficial (0-5 cm) que propició una menor saturación por agua que el LC. Respecto a los parámetros relacionados con la agregación, el NL aumentó los macroagregados hasta los 10 cm de profundidad y favoreció la acumulación de CO y N en todas las fracciones de tamaño de agregados. Sin embargo, la recuperación del grado de macroagregación tras el cese del laboreo resulta lenta en comparación con otros suelos, posiblemente debido al bajo contenido en arcilla en el horizonte Ap. En comparación con el NL, la enmienda mostró también un efecto positivo, aunque muy ligero, en la agregación del suelo. En contradicción con otros estudios en suelos ácidos, nuestros resultados indican la existencia de una jerarquía de agregados, y destacan el papel importante de la MO en la mejora de la agregación. Tanto el NL como la enmienda favorecieron por separado varias propiedades químicas, físicas y biológicas del suelo, pero, en general, encontramos los mayores beneficios con su uso combinado. Además, a largo plazo el efecto positivo de NL en las propiedades del suelo fue en aumento, mientras que el efecto beneficioso de la enmienda se limitó básicamente a las propiedades químicas y se desvaneció en pocos años. Destacamos que las condiciones meteorológicas a lo largo del ensayo beneficiaron la producción de biomasa en NL, y en consecuencia las propiedades relacionadas con la materia orgánica, por lo que son un factor a tener en cuenta a la hora de evaluar los efectos de la enmienda y el laboreo sobre las propiedades del suelo, especialmente en zonas donde esas condiciones son muy variables entre una campaña y otra. Los resultados de este estudio han puesto de manifiesto que el NL no ha mermado la eficacia de la enmienda caliza, posiblemente gracias a la alta solubilidad de la enmienda aplicada, es más, el manejo con NL y enmienda es el que ha favorecido en mayor medida ciertos parámetros de calidad del suelo. Por el contrario el LC sí parece anular los beneficios de la enmienda en relación con las propiedades relacionadas con la MO. Por tanto, cabe concluir que la combinación de NL y la enmienda es una práctica adecuada para mejorar las propiedades químicas y físicas de suelos ácidos degradados por el laboreo. ABSTRACT Excessive acidity in soils is associated with deficiencies in certain nutrients and high concentrations of available aluminum, which is toxic for most Mediterranean crops. Tilling these soils results in the loss of soil organic matter (SOM), damages soil structure and reduces biological activity, ultimately degrading soil quality. It is expected, therefore, that when acid soils are tilled, their particular problems will tend to get worse. In our study area, the "Cañamero’s Raña” (Extremadura, Spain), acid soils degraded by an inappropriate tillage prevail. Rañas are large and flat platforms with very old soils (Palexerults), which are characterized by an exchange complex dominated by aluminum and an acid pH which decreases with depth. These soils have a strong Bt horizon rich in kaolinite clays, which encourages the formation of perched water-tables near the soil surface during periods of excessive rain. During the first third of the 20th century, these soils, that previously supported cork oak or its scrub replacement, were cultivated. Tillage accelerated the mineralization of the SOM, aggravating the problems of excessive acidity, which finally led to the abandonment of the land due to low productivity. To recover the quality of these degraded soils and to obtain consistent yields it is necessary, first, to apply amendments to raise the pH and reduce aluminum toxicity, and second to encourage the accumulation of SOM. In 2005 a field trial was established in the Raña to study the influence of no-tillage and the use of a Ca-amendment on soil quality related parameters in a forage crop agrosystem. The experimental design was a split-plot with four replicates where the main factor was tillage type, no-tillage (NT) versus traditional tillage (TT) and the secondary factor was the use or not of a Ca-amendment. The Ca-amendment was a mixture of sugar foam and red gypsum that was incorporated into the top 7 cm of the soil. Since the beginning of the experiment, NT had a positive influence on total and particulate organic carbon (TOC and POC, respectively), while the Ca-amendment had a small positive influence at the beginning of the study but its effect diminished with time. The highest TOC and POC contents were observed when NT and the Ca-amendment were combined. The Ca-amendment, even under NT, rapidly increased pH and Ca, and decreased the aluminum content to a depth of 50 cm, as well as improving soil aggregation slightly. NT, due to the increased POC, TOC and Glomalin-related soil proteins (GRSP), which can form stable non-toxic compounds with aluminum, also contributed to the reduction of aluminum toxicity in the upper layer. When perched water-tables near the soil surface were formed in campaigns with excessive rainfall, NT provided more favorable conditions for germination and crop development, resulting in higher yields compared with TT. This was directly related to the higher water storage capacity and the greater transmissivity of the water downwards from the upper layers, which led to lower water saturation under NT compared with TT. With regards to the aggregation-related parameters, NT increased macroaggregation to a depth of 10 cm and favored the accumulation of OC and N in all aggregate size fractions. However, the degree of recovery of macroaggregation after tillage ceased was slow compared with other soils, possibly due to the low clay content in the Ap horizon. Compared with NT, the Ca-amendment had a slight positive effect on soil aggregation. In contrast to other studies in acid soils, our results indicate the existence of an aggregate hierarchy, and highlight the important role of SOM in improving aggregation. Both NT and the Ca-amendment separately favored various chemical, physical and biological soil properties, but in general we found the greatest benefits when the two treatments were combined. In addition, the positive effect of NT on soil properties increased with time, while the beneficial effect of the Ca-amendment, which was limited to the chemical properties, vanished after a few years. It is important to note that the meteorological conditions throughout the experiment benefited biomass production under NT and, as a consequence, organic matter related properties. This suggests that meteorological conditions are a factor to consider when evaluating the effects of Ca-amendments and tillage on soil properties, especially in areas where such conditions vary significantly from one campaign to another. The results of this study show that NT did not diminish the effectiveness of the Ca-amendment, possibly due to the high solubility of the selected amendment. Moreover, the combination of NT and the Ca-amendment was actually the management that favored certain soil quality parameters the most. By contrast, TT seemed to nullify the benefits of the Ca-amendment with regards to the OM related properties. In conclusion, the combination of NT and the application of a Ca-amendment is an advisable practice for improving the chemical and physical properties of acid soils degraded by tillage.

Soil quality response to land-use change for sugarcane expansion in Brazil

Globally, increasing demands for biofuels have intensified the rate of land-use change (LUC) for expansion of bioenergy crops. In Brazil, the world\'s largest sugarcane-ethanol producer, sugarcane area has expanded by 35% (3.2 Mha) in the last decade. Sugarcane expansion has resulted in extensive pastures being subjected to intensive mechanization and large inputs of agrochemicals, which have direct implications on soil quality (SQ). We hypothesized that LUC to support sugarcane expansion leads to overall SQ degradation. To test this hypothesis we conducted a field-study at three sites in the central-southern region, to assess the SQ response to the primary LUC sequence (i.e., native vegetation to pasture to sugarcane) associated to sugarcane expansion in Brazil. At each land use site undisturbed and disturbed soil samples were collected from the 0-10, 10-20 and 20-30 cm depths. Soil chemical and physical attributes were measured through on-farm and laboratory analyses. A dataset of soil biological attributes was also included in this study. Initially, the LUC effects on each individual soil indicator were quantified. Afterward, the LUC effects on overall SQ were assessed using the Soil Management Assessment Framework (SMAF). Furthermore, six SQ indexes (SQI) were developed using approaches with increasing complexity. Our results showed that long-term conversion from native vegetation to extensive pasture led to soil acidification, significant depletion of soil organic carbon (SOC) and macronutrients [especially phosphorus (P)] and severe soil compaction, which creates an unbalanced ratio between water- and air-filled pore space within the soil and increases mechanical resistance to root growth. Conversion from pasture to sugarcane improved soil chemical quality by correcting for acidity and increasing macronutrient levels. Despite those improvements, most of the P added by fertilizer accumulated in less plant-available P forms, confirming the key role of organic P has in providing available P to plants in Brazilian soils. Long-term sugarcane production subsequently led to further SOC depletions. Sugarcane production had slight negative impacts on soil physical attributes compared to pasture land. Although tillage performed for sugarcane planting and replanting alleviates soil compaction, our data suggested that the effects are short-term with persistent, reoccurring soil consolidation that increases erosion risk over time. These soil physical changes, induced by LUC, were detected by quantitative soil physical properties as well as by visual evaluation of soil structure (VESS), an on-farm and user-friendly method for evaluating SQ. The SMAF efficiently detected overall SQ response to LUC and it could be reliably used under Brazilian soil conditions. Furthermore, since all of the SQI values developed in this study were able to rank SQ among land uses. We recommend that simpler and more cost-effective SQI strategies using a small number of carefully chosen soil indicators, such as: pH, P, K, VESS and SOC, and proportional weighting within of each soil sectors (chemical, physical and biological) be used as a protocol for SQ assessments in Brazilian sugarcane areas. The SMAF and SQI scores suggested that long-term conversion from native vegetation to extensive pasture depleted overall SQ, driven by decreases in chemical, physical and biological indicators. In contrast, conversion from pasture to sugarcane had no negative impacts on overall SQ, mainly because chemical improvements offset negative impacts on biological and physical indicators. Therefore, our findings can be used as scientific base by farmers, extension agents and public policy makers to adopt and develop management strategies that sustain and/or improving SQ and the sustainability of sugarcane production in Brazil.

Aggregate stability of soils from Western United States and Canada; measurement procedure, correlations with soil constituents

Cover title.

Structure repair of a compacted vertisol with wet-dry cycles and crops

We hypothesized that the four rotation crops: wheat (Triticum aestivum L.), sorghum [Sorghum bicolor (L.) Merr.], lablab [Lablab purpureus (L.) Sweet] and mung bean [ Vigna radiata (L.) R. Wilczek] differ in their ability to repair soil structure. The study was conducted on a Typic Haplustert, Queensland, Australia, locally termed a Black Earth and considered a prime cropping soil. Large (0.5-m depth by 0.3-m diam.) soil cores, collected from compacted wheel furrows in an irrigated cotton (Gossypium hirsutum L.) field, were subjected to three, six, or nine wet-dry cycles that simulated local flood irrigation practices. After each cycle, soil profiles were sampled for clod bulk density, image analysis of soil structure, and evapotranspiration. Generally, all crops improved soil structure over the initial field condition but lablab and mung bean gave improvements to greater depths and more rapidly than wheat and sorghum. Mung bean and lablab caused up to a threefold increase in clod porosity in the 0.1- to 0.4-m soil layer after only three wet-dry cycles, whereas sorghum required nine wet-dry cycles to increase clod porosity in only the 0.2- to 0.3-m layer, and wheat gave no improvement even after nine wet-dry cycles. Image analysis of soil structure showed that lablab and mung bean rapidly (by three wet-dry cycles) produced smaller peds with more interconnected pore space than wheat and sorghum. By nine wet-dry cycles, sorghum achieved deep cracking of the soil but the material between the cracks remained large and dense. Evapotranspiration was double under lablab and mung bean compared with wheat and sorghum. Our results indicate greater cycles of wetting and drying under lablab and mung bean than wheat and sorghum that have led to rapid repair of soil compaction.

Soil water dynamics and availability for citrus and peanut along a hillslope at the Sunjia Red Soil Critical Zone Observatory (CZO)

Acknowledgments This work was granted by the China-UK jointed Red Soil Critical Zone project from National Natural Science Foundation of China (NSFC: 41571130053; 41301233) and from Natural Environmental Research Council (NERC: Code: NE/N007611/1), and by the National Key Technology R&D Program of China (2011BAD31B04). We thank two anonymous reviewers for their constructive comments.

Seismic Response Analysis of a Full-Scale Base-Isolated Structure via Measurements and Modeling

The full-scale base-isolated structure studied in this dissertation is the only base-isolated building in South Island of New Zealand. It sustained hundreds of earthquake ground motions from September 2010 and well into 2012. Several large earthquake responses were recorded in December 2011 by NEES@UCLA and by GeoNet recording station nearby Christchurch Women's Hospital. The primary focus of this dissertation is to advance the state-of-the art of the methods to evaluate performance of seismic-isolated structures and the effects of soil-structure interaction by developing new data processing methodologies to overcome current limitations and by implementing advanced numerical modeling in OpenSees for direct analysis of soil-structure interaction.

This dissertation presents a novel method for recovering force-displacement relations within the isolators of building structures with unknown nonlinearities from sparse seismic-response measurements of floor accelerations. The method requires only direct matrix calculations (factorizations and multiplications); no iterative trial-and-error methods are required. The method requires a mass matrix, or at least an estimate of the floor masses. A stiffness matrix may be used, but is not necessary. Essentially, the method operates on a matrix of incomplete measurements of floor accelerations. In the special case of complete floor measurements of systems with linear dynamics, real modes, and equal floor masses, the principal components of this matrix are the modal responses. In the more general case of partial measurements and nonlinear dynamics, the method extracts a number of linearly-dependent components from Hankel matrices of measured horizontal response accelerations, assembles these components row-wise and extracts principal components from the singular value decomposition of this large matrix of linearly-dependent components. These principal components are then interpolated between floors in a way that minimizes the curvature energy of the interpolation. This interpolation step can make use of a reduced-order stiffness matrix, a backward difference matrix or a central difference matrix. The measured and interpolated floor acceleration components at all floors are then assembled and multiplied by a mass matrix. The recovered in-service force-displacement relations are then incorporated into the OpenSees soil structure interaction model.

Numerical simulations of soil-structure interaction involving non-uniform soil behavior are conducted following the development of the complete soil-structure interaction model of Christchurch Women's Hospital in OpenSees. In these 2D OpenSees models, the superstructure is modeled as two-dimensional frames in short span and long span respectively. The lead rubber bearings are modeled as elastomeric bearing (Bouc Wen) elements. The soil underlying the concrete raft foundation is modeled with linear elastic plane strain quadrilateral element. The non-uniformity of the soil profile is incorporated by extraction and interpolation of shear wave velocity profile from the Canterbury Geotechnical Database. The validity of the complete two-dimensional soil-structure interaction OpenSees model for the hospital is checked by comparing the results of peak floor responses and force-displacement relations within the isolation system achieved from OpenSees simulations to the recorded measurements. General explanations and implications, supported by displacement drifts, floor acceleration and displacement responses, force-displacement relations are described to address the effects of soil-structure interaction.

Soil Health, Soil Biology, Soilborne Diseases and Sustainable Agriculture

Soil Health, Soil Biology, Soilborne Diseases and Sustainable Agriculture provides readily understandable information about the bacteria, fungi, nematodes and other soil organisms that not only harm food crops but also help them take up water and nutrients and protect them from root diseases. Complete with illustrations and practical case studies, it provides growers and their consultants with holistic solutions for building an active and diverse soil biological community capable of improving soil structure, enhancing plant nutrient uptake and suppressing root pests and pathogens.

Soil surface textures, Cumberland County, New Jersey /

"October 1986."

Soil surface textures, Cumberland County, New Jersey /

"October 1986."

Soil surface textures, Salem County, New Jersey /

"October 1986."