Effect of zirconia surface treatments on the shear strength of zirconia/veneering ceramic composites

Aim of the investigation was to assess the effect of different surface treatments on the bond strength of veneering ceramics to zirconia. In a shear test, the influences of polishing, sandblasting, and silica-coating of the zirconia surface on bonding were assessed with five different veneering ceramics. In addition the effect of liner application was examined. With one veneering ceramic, the impact of regeneration firing of zirconia was also evaluated. Statistical analysis was performed with one-way ANOVA and post hoc Scheffé's test. Failure in every case occurred in the veneering ceramic adjacent to the interface with a thin layer of ceramic remaining on the zirconia surface, indicating that bond strength was higher than the cohesive strength of the veneering ceramic. Shear strength ranged from 23.5 +/- 3.4 MPa to 33.0 +/- 6.8 MPa without explicit correlation to the respective surface treatment. Regeneration firing significantly decreased the shear strength of both polished and sandblasted surfaces. Findings of this study revealed that bonding between veneering ceramics and zirconia might be based on chemical bonds. On this note, sandblasting was not a necessary surface pretreatment to enhance bond strength and that regeneration firing was not recommended.

Means and method for soil testing

An inexpensive device which is easily operated to accurately measure the Coulomb parameters of the soil. The Coulomb parameters are used in Coulomb's equation to calculate the shearing stresses along a failure surface of the soil. The device includes an instrument to test soil shear strength to which several weights have been added. To obtain the Coulomb parameters, the instrument is placed on the soil to be tested and weights are incrementally added to it. The instrument is rotated at each weight increment and the shearing stresses are read from its calibrated dial. The stresses are plotted on a graph from which the Coulomb parameters are determined. The shearing stress of the soil with any known force applied to it can then be determined.