Nonlinearly coupled localized plasmon resonances: Resonant second-harmonic generation

The efficient resonant nonlinear coupling between localized surface plasmon modes is demonstrated in a simple and intuitive way using boundary integral formulation and utilizing second-order optical nonlinearity. The nonlinearity is derived from the hydrodynamic description of electron plasma and originates from the presence of material interfaces in the case of small metal particles. The coupling between fundamental and second-harmonic modes is shown to be symmetry selective and proportional to the spatial overlap between polarization dipole density of the second-harmonic mode and the square of the polarization charge density of the fundamental mode. Particles with high geometrical symmetry will convert a far-field illumination into dark nonradiating second-harmonic modes, such as quadrupoles. Effective second-harmonic susceptibilities are proportional to the surface-to-volume ratio of a particle, emphasizing the nanoscale enhancement of the effect.

Freeze-Dried Strawberries Lower Serum Cholesterol and Lipid Peroxidation in Adults with Abdominal Adiposity and Elevated Serum Lipids

Dietary flavonoid intake, especially berry flavonoids, has been associated with reduced risks of cardiovascular disease (CVD) in large prospective cohorts. Few clinical studies have examined the effects of dietary berries on CVD risk factors. We examined the hypothesis that freeze-dried strawberries (FDS) improve lipid and lipoprotein profiles and lower biomarkers of inflammation and lipid oxidation in adults with abdominal adiposity and elevated serum lipids. In a randomized dose-response controlled trial, 60 volunteers [5 men and 55 women; aged 49 ± 10 y; BMI: 36 ± 5 kg/m2 (means ± SDs)] were assigned to consume 1 of the following 4 beverages for 12 wk: 1) low-dose FDS (LD-FDS; 25 g/d); 2) low-dose control (LD-C); 3) high-dose FDS (HD-FDS; 50 g/d); and 4) high-dose control (HD-C). Control beverages were matched for calories and total fiber. Blood draws, anthropometrics, blood pressure, and dietary data were collected at screening (0 wk) and after 12-wk intervention. Dose-response analyses revealed significantly greater decreases in serum total and LDL cholesterol and nuclear magnetic resonance (NMR)–derived small LDL particle concentration in HD-FDS [33 ± 6 mg/dL, 28 ± 7 mg/dL, and 301 ± 78 nmol/L, respectively (means ± SEMs)] vs. LD-FDS (−3 ± 11 mg/dL, −3 ± 9 mg/dL, and −28 ± 124 nmol/L, respectively) over 12 wk (0–12 wk; all P < 0.05). Compared with controls, only the decreases in total and LDL cholesterol in HD-FDS remained significant vs. HD-C (0.7 ± 12 and 1.4 ± 9 mg/dL, respectively) over 12 wk (0–12 wk; all P < 0.05). Both doses of strawberries showed a similar decrease in serum malondialdehyde at 12 wk (LD-FDS: 1.3 ± 0.2 μmol/L; HD-FDS: 1.2 ± 0.1 μmol/L) vs. controls (LD-C: 2.1 ± 0.2 μmol/L; HD-C: 2.3 ± 0.2 μmol/L) (P < 0.05). In general, strawberry intervention did not affect any measures of adiposity, blood pressure, glycemia, and serum concentrations of HDL cholesterol and triglycerides, C-reactive protein, and adhesion molecules. Thus, HD-FDS exerted greater effects in lowering serum total and LDL cholesterol and NMR-derived small LDL particles vs. LD-FDS in the 12-wk study. These findings warrant additional investigation in larger trials. This trial was registered at clinicaltrials.gov as NCT01883401.

Mechanisms of lipid malabsorption in Cystic Fibrosis: the impact of essential fatty acids deficiency

Affiliation: CHU-Sainte-Justine, Université de Montréal

Les effets du dalcetrapib, un inhibiteur de la protéine de transfert des esters de cholestérol (CETP), sur la structure et la fonction des lipoprotéines de haute densité (HDL) dans l’étude dal-PLAQUE2

Introduction : Le dalcetrapib, inhibiteur de la glycoprotéine hydrophobe de transfert des esters de cholestérol (CETP), a été étudié dans le cadre de l’essai clinique de phase II dal-PLAQUE2 (DP2). L’objectif principal est d’étudier l’effet du dalcetrapib après 1 an de traitement sur la structure et la fonction des HDL dans une sous-population de la cohorte DP2. Méthode : Les sujets de la cohorte DP2 ayant une série de mesures de cIMT et des échantillons de plasma et sérum au baseline et à 1 an de traitement furent sélectionnés (379 sujets: 193 du groupe placebo (PCB) et 186 du groupe dalcetrapib (DAL)). Des données biochimiques prédéterminées, le profil des concentrations et tailles des sous-classes de HDL et LDL en résonance magnétique nucléaire (RMN) et 2 mesures de capacité d’efflux de cholestérol (CEC) du sérum ont été explorées. Les données statistiques furent obtenues en comparant les changements à un an à partir du « baseline » avec un ANOVA ou ANCOVA. La procédure normalisée de fonctionnement d’essai d’efflux de cholestérol permet de calculer l’efflux fractionnel (en %) de 3H-cholestérol des lignées cellulaires BHK-ABCA1 (fibroblastes) et J774 (macrophages, voie ABCA1) et HepG2 (hépatocytes, voie SR-BI), vers les échantillons sériques de la cohorte DP2. Résultats : Pour la biochimie plasmatique, un effet combiné des changements d’activité de CETP dans les 2 groupes a causé une réduction de 30% dans le groupe DAL. Après 1 an de traitement dans le groupe DAL, la valeur de HDL-C a augmenté de 35,5% (p < 0,001) et l’apoA-I a augmenté de 14,0% (p < 0,001). Au profil RMN, dans le groupe DAL après 1 an de traitement, il y a augmentation de la taille des HDL-P (5,2%; p < 0,001), des grosses particules HDL (68,7%; p < 0,001) et des grosses particules LDL (37,5%; p < 0,01). Les petites particules HDL sont diminuées (-9,1%; p < 0,001). Il n’y a aucune différence significative de mesure de cIMT entre les deux groupes après 1 an de traitement. Pour la CEC, il y a augmentation significative par la voie du SR-BI et une augmentation via la voie ABCA1 dans le groupe DAL après 1 an de traitement. Conclusion : Après un an de traitement au dalcetrapib, on note une hausse de HDL-C, des résultats plutôt neutres au niveau du profil lipidique par RMN et une CEC augmentée mais trop faible pour affecter la valeur de cIMT chez les échantillons testés.

Magnetic coupling in the weac ferromagnet CuF2

CuF2 is known to be an antiferromagnetic compound with a weak ferromagnetism due to the anisotropy of its monoclinic unit cell (Dzialoshinsky-Moriya mechanism). We investigate the magnetic ordering of this compound by means of ab initio periodic unrestricted Hartree-Fock calculations and by cluster calculations which employ state-of-the-art configuration interaction expansions and modern density functional theory techniques. The combined use of periodic and cluster models permits us to firmly establish that the antiferromagnetic order arises from the coupling of one-dimensional subunits which themselves exhibit a very small ferromagnetic coupling between Cu neighbor cations. This magnetic order could be anticipated from the close correspondence between CuF2 and rutile crystal structures.

High-temperature hysteresis and magnetization reversal in nanocomposite FeCo plus MnO

The hysteretic behavior of mechanically alloyed nanocomposites FeCo + MnO was studied at high temperatures. These composites present an unusual high and thermally stable coercivity, compared to FeCo milled at equal conditions. Coercivity enhancement was observed in hysteresis loops obtained between room temperature and 750 K. It is attributed to the isolation of the FeCo ferromagnetic particles by the paramagnetic MnO (T(N) = 120 K). The M(rev)(M(irr))(H) curves are clearly linear for the composite, indicating that coherent rotation is the reversal mechanism in these materials. (C) 2008 Elsevier B.V. All rights reserved.

Synthesis of YAP phase by a polymeric method and phase progression mechanisms

The phase formation kinetics of YAP (YAlO(3)) synthesized through the polymeric precursor method was investigated by thermal analysis, X-ray diffraction and FT-IR spectroscopy. We demonstrated that the YAP synthesis is highly dependent on the heat and mass transport during all stages of the synthesis route. In the first stages, during the preparation of amorphous precursor, ""hot spots"" need to be suppressed to avoid the occurrence of chemical inhomogeneities. Very high heating rates combined with small amorphous particles are advantageous in the last stage during the formation of crystalline phase. We were able to synthesize nanosized particles of YAP single phase at temperatures around 1100 A degrees C for future preparation of phosphors or ceramics for optics.

Performance of suspended and attached growth MBR systems in treating high strength synthetic wastewater

The performance of laboratory-scale attached growth (AG) and suspended growth (SG) membrane bioreactors (MBRs) was evaluated in treating synthetic wastewater simulating high strength domestic wastewater. This study investigated the influence of sponge suspended carriers in AG-MBR system, occupying 15% reactor volume, on the removal of chemical oxygen demand (COD), total nitrogen (TN) and total phosphorus (TP), and compared it to that of SG-MBR. Results showed that the removal efficiencies of COD, TN and TP in AG-MBR were 98%, 89% and 58%, respectively as compared to 98%, 74% and 38%, respectively in SG-MBR. Improved TN removal in AG-MBR systems was primarily based on simultaneous nitrification and denitrification (SND) process. These results infer that the presence of small bio-particles having higher microbial activity and the growth of complex biomass captured within the suspended sponge carriers resulted in improved TN and TP removal in AG-MBR.

Release of allergens in respirable aerosols : a link between grass pollen and asthma

Background: Asthma incidence has long been linked to pollen, even though pollen grains are too large to penetrate into the airways where asthmatic responses originate. Pollen allergens found in small, respirable particles have been implicated in a number of asthma epidemics, particularly ones following rainfall or thunderstorms.

Objective: The aim of this study was to determine how pollen allergens form the respirable aerosols necessary for triggering asthma.

Methods: Flowering grasses were humidified and then dried in a controlled-environment chamber connected to a cascade impactor and an aerosol particle counter. Particles shed from the flowers were analyzed with high-resolution microscopy and immunolabeled with rabbit anti-Phl p 1 antibody, which is specific for group 1 pollen allergens.

Results: Contrary to what has been reported in other published accounts, most of the pollen in this investigation remained on the open anthers of wind pollinated plants unless disturbed—eg, by wind. Increasing humidity caused anthers to close. After a cycle of wetting and drying followed by wind disturbance, grasses flowering within a chamber produced an aerosol of particles that were collected in a cascade impactor. These particles consisted of fragmented pollen cytoplasm in the size range 0.12 to 4.67 μm; they were loaded with group 1 allergens.

Conclusion: Here we provide the first direct observations of the release of grass pollen allergens as respirable aerosols. They can emanate directly from the flower after a moisture-drying cycle. This could explain asthmatic responses associated with grass pollination, particularly after moist weather conditions.

Plane wave scattering by a spherical di-electric particle in motion : a relativistic extension of the Mie theory

Light scattering from small spherical particles has applications in a vast number of disciplines including astrophysics, meteorology optics and particle sizing. Mie theory provides an exact analytical characterization of plane wave scattering from spherical dielectric objects. There exist many variants of the Mie theory where fundamental assumptions of the theory has been relaxed to make generalizations. Notable such extensions are generalized Mie theory where plane waves are replaced by optical beams, scattering from lossy particles, scattering from layered particles or shells and scattering of partially coherent (non-classical) light. However, no work has yet been reported in the literature on modifications required to account for scattering when the particle or the source is in motion relative to each other. This is an important problem where many applications can be found in disciplines involving moving particle size characterization. In this paper we propose a novel approach, using special relativity, to address this problem by extending the standard Mie theory for scattering by a particle in motion with a constant speed, which may be very low, moderate or comparable to the speed of light. The proposed technique involves transforming the scattering problem to a reference frame co-moving with the particle, then applying the Mie theory in that frame and transforming the scattered field back to the reference frame of the observer.

Effect of magnetic treatment on microstructure and cycle performance of LiFePO4/C cathode material

LiFePO4/C composite was prepared by hydrothermal synthesis along with a magnetic treatment method. The LiFePO4/C composite synthesized without magnetic treatment is an integrated rhombic shape crystal, whereas the LiFePO4/C material synthesized with magnetic treatment presents a rhombus shape which is self-assembled by a number of small crystal particles with an average size of about 100 nms. The capacity retention for the LiFePO4/C cathode material synthesized without magnetic treatment is only 77% after 30 charge-discharge cycles at 0.2 C, but the LiFePO4/C composite synthesized with magnetic treatment has a capacity retention of 100% after 100 charge-discharge cycles at 1 C and 5 C. It suggests that magnetic treatment can remove Fe3+ cations effectively during the preparation process and enhance the cycle performance of the LiFePO4/C material.

Nanopartíulas de magnetita com oxacilina obtida por moagem de alta energia para aplicações biomédicas

The drug targeting has been the subject of extensive studies in order to develop site-specific treatments that minimize side effects and become more effective anticancer therapy. Despite considerable interest in this class, drugs like antibiotics also have limitations, and have been neglected. Using new pharmaceutical technologies, the use of magnetic vectors appear as promising candidate for drug delivery systems in several studies. Small magnetic particles bound to the drug of interest can be modulated according to the orientation of a magnet outside the body, locating and holding in a specific site. In this work, we propose the use of High Energy Milling (HEM) for synthesis of a magnetic vector with characteristics suitable for biomedical applications by intravenous administration, and for the formation of an oxacillin-carrier complex to obtain a system for treating infections caused by Staphylococcus aureus. The results of the variation of milling time showed that the size and structural properties of the formed material change with increasing milling time, and in 60 hours we found the sample closest to the ideal conditions of the material. The vector-drug system was studied in terms of structural stability and antimicrobial activity after the milling process, which revealed the integrity of the oxacillin molecule and its bactericidal action on cultures of Staphylococcus aureus ATCC

Alterações nos atributos químicos de um Latossolo distroférrico decorrentes da granulometria e doses de calcário em sistemas plantio direto e convencional

Atualmente, percebe-se o interesse na calagem superficial, sem prévia incorporação, para instalação do sistema plantio direto (SPD). Dessa forma, objetivou-se determinar os efeitos de granulometria e doses de calcários no SPD, em fase de implantação, e no sistema de plantio convencional (SPC) sobre o pH, H + Al, Ca2+ e Mg2+. O experimento foi realizado no ano agrícola de 1998/99, na FCA/UNESP-Botucatu (SP), em Latossolo Vermelho. O delineamento experimental foi de blocos ao acaso, com parcelas subsubdivididas e quatro repetições. As parcelas representaram os sistemas de plantio (SPD e SPC); as subparcelas, a granulometria dos calcários [grosso (PRNT = 56 %) e fino (PRNT = 90 %)], e as subsubparcelas, as doses de 2, 4 e 6 t ha-1 (calcário grosso) e 1,2; 2,4 e 3,6 t ha-1 (fino). O solo foi amostrado, a 0-5, 5-10, 10-20 e 20-40 cm de profundidade, 1, 3 e 12 meses após a aplicação dos corretivos. A análise de variância não detectou interação tripla entre os fatores. A aplicação de calcário superficial no SPD, independentemente da granulometria e da dose, alterou positivamente os atributos químicos do solo (0-5 e 5-10 cm), 12 meses após a calagem. O corretivo continuou reagindo, independentemente do sistema de plantio, de forma intensa, mesmo após três meses. A aplicação de doses mais elevadas de calcário, com maior granulometria, sugeriu efeito residual prolongado.

Structure of redispersible SnO2 nanoparticles

Suspensions of undoped SnO2 nanoparticles and containing Eu3+ ions were prepared by a sol-gel procedure. Using the classical synthesis method ( precipitation), the particles tend to grow by a coarsening process in order to minimize the surface free energy. This effect can strongly be reduced by the addition of an amide and surfactant during the synthesis, which decreases the surface free energy of the colloidal particles. These additives promote the formation of powders composed of very small primary particles formed by a crystallite of 10 Angstrom, and exhibit good redispersion properties. The local and long order structures of the redispersible powder were studied by X-rays absorption spectroscopy at Sn L-I edge and X-rays diffraction, respectively. The structure of the colloidal aggregates in suspension was investigated by small angle X-rays scattering (SAXS). SAXS results indicate the sol are composed by a polidisperse system of hard spheres resulting of agglomeration of the primary particles and their size increasing by agglomeration for progressively higher Eu3+ content.

Influence of seed particle frequency on the phase formation and on the microstructure of 0.88 PZN-0.07 BT-0.05 PT ceramic

The Pechini method as well as the simultaneous addition of seeds particles and dopant solutions of BaTiO3 (BT) and PbTiO3 (PT) were used to prepare the perovskite phase 0.88 PZN-0.07 BT-0.05 PT. To study the influence of seed particle frequency on the synthesis of the PZN ceramic, two ranges of seed particle size were used: the range from 30 to 100 nm, termed small seed particles (frequency of 10(15) particles/cm(3)); and the range from 100 to 900 nm, termed large seed particles (frequency of 10(13) particles/cm(3)). The crystalline nuclei size influenced the calcining process, the sintering process and the microstructure. Samples prepared with lower seed frequency displayed more amount of pyroclore phase, need higher temperatures for sintering and showed a more heterogeneous microstructure with poor dielectric properties. (C) 2000 Elsevier B.V. Ltd and Techna S.r.l. All rights reserved.