Desarrollo de un sistema automático de detección de disgrafías en niños de 4 a 5 años

La escritura es una actividad psicomotora muy importante en el desarrollo infantil. Tanto es así que su correcto aprendizaje condicionará el futuro de una persona, pues estará presente en todo tipo de situaciones cotidianas. La disgrafía es el término utilizado para referirse a los problemas relacionados con la escritura, y se manifiesta cuando la escritura de un determinado sujeto es ilegible o lenta como resultado de un aprendizaje fallido de los procesos motores de la escritura. Estos problemas intentan resolverse durante el desarrollo infantil mediante diferentes pruebas que miden las capacidades visomotoras de los niños basándose en criterios de forma (número y posición correcta de trazos). Sin embargo, a lo largo de los años estos criterios han demostrado no ser totalmente precisos en la detección prematura de posibles casos de disgrafía. Por ello, en este proyecto se ha desarrollado una aplicación que ayuda a ampliar la fiabilidad de los test actuales, utilizando un criterio cinemático. Esta aplicación, desarrollada para una tableta Android, muestra al niño una serie de figuras que él debe copiar en la tableta haciendo uso de un lápiz óptico. Los trazos registrados por la aplicación son analizados para valorar aspectos como la fluidez, continuidad y regularidad, ampliando así la fiabilidad de los test actuales, lo que permite desechar falsos positivos y detectar irregularidades que antes no podían ser detectadas. La aplicación desarrollada ha sido validada con un total de ocho niños de cuatro años y siete meses de media de edad, confirmando que cumple con las expectativas planteadas. ABSTRACT. Writing is a very important psychomotor activity in child development because it will be present in all kinds of everyday situations; therefore its proper learning will determine the future of the individual. Dysgraphia is the term used to refer to the problems related to writing, and it takes place when a particular person’s writing is unreadable or slow-moving as a result of a failed learning of writing motor processes. These problems are usually detected by different tests that measure children’s visual motor abilities based on shape criteria (correct number and position of strikes). However, over the years these criteria haven’t proved to be completely accurate in the early detection of possible cases of dysgraphia. Therefore, in this project is presented an application that extends the reliability of current test, using a kinematic approach. This application, developed for an Android tablet, displays a series of figures that the child must copy to the tablet by using a stylus. Strokes recorded by the application are then analyzed to assess aspects such as fluidity, continuity and regularity, expanding the reliability of the current test, discarding false positives created by the conventional criteria and detecting irregularities that previously could not be detected. The developed application has been validated with a total of eight children about four years and seven months in average age, confirming that the application fulfills the initial expectations.

The use of flow control devices to improve the flow pattern and throughput of sieve trays

Compared to packings trays are more cost effective column internals because they create a large interfacial area for mass transfer by the interaction of the vapour on the liquid. The tray supports a mass of froth or spray which on most trays (including the most widely used sieve trays) is not in any way controlled. The two important results of the gas/liquid interaction are the tray efficiency and the tray throughput or capacity. After many years of practical experience, both may be predicted by empirical correlations, despite the lack of understanding. It is known that the tray efficiency is in part determined by the liquid flow pattern and the throughput by the liquid froth height which in turn depends on the liquid hold-up and vapour velocity. This thesis describes experimental work on sieve trays in an air-water simulator, 2.44 m in diameter. The liquid flow pattern, for flow rates similar to those used in commercial scale distillation, was observed experimentally by direct observation; by water-cooling, to simulate mass transfer; use of potassium permanganate dye to observe areas of longer residence time; and by height of clear liquid measurements across the tray and in the downcomer using manometers. This work presents experiments designed to evaluate flow control devices proposed to improve the gas liquid interaction and hence improve the tray efficiency and throughput. These are (a) the use of intermediate weirs to redirect liquid to the sides of the tray so as to remove slow moving/stagnant liquid and (b) the use of vapour-directing slots designed to use the vapour to cause liquid to be directed towards the outlet weir thus reducing the liquid hold-up at a given rate i.e. increased throughput. This method also has the advantage of removing slow moving/stagnant liquid. In the experiments using intermediate weirs, which were placed in the centre of the tray. it was found that in general the effect of an intermediate weir depends on the depth of liquid downstream of the weir. If the weir is deeper than the downstream depth it will cause the upstream liquid to be deeper than the downstream liquid. If the weir is not as deep as deep as the downstream depth it may have little or no effect on the upstream depth. An intermediate weir placed at an angle to the direction of flow of liquid increases the liquid towards the sides of the tray without causing an increase in liquid hold-up/ froth height. The maximum proportion of liquid caused to flow sideways by the weir is between 5% and 10%. Experimental work using vapour-directing slots on a rectangular sieve tray has shown that the horizontal momentum that is imparted to the liquid is dependent upon the size of the slot. If too much momentum is transferred to the liquid it causes hydraulic jumps to occur at the mouth of the slot coupled with liquid being entrained, The use of slots also helps to eliminate the hydraulic gradient across sieve trays and provides a more uniform froth height on the tray. By comparing the results obtained of the tray and point efficiencies, it is shown that a slotted tray reduces both values by approximately 10%. This reduction is due to the fact that with a slotted tray the liquid has a reduced residence time Ion the tray coupled also with the fact that large size bubbles are passing through the slots. The effectiveness of using vapour-directing slots on a full circular tray was investigated by using dye to completely colour the biphase. The removal of the dye by clear liquid entering the tray was monitored using an overhead camera. Results obtained show that the slots are successful in their aim of reducing slow moving liquid from the sides of the tray, The net effect of this is an increase in tray efficiency. Measurements of slot vapour-velocity found it to be approximately equal to the hole velocity.

A high-efficiency solar rankine engine with isothermal expansion

Though the principle of the solar Rankine cycle is well known, with several examples reported in the literature, there is yet a scarcity of engines that could be efficiently applied in small-scale (<100 KW) applications. Hence, this paper presents a variant of the engine that uses an isothermal expansion to achieve a theoretical efficiency close to the Carnot limit. Generation of steam inside the power cylinder obviates the need for an external boiler. The device is suitable for slow-moving applications and is of particular interest for driving a batch-desalination process. Preliminary experiments have shown cycle efficiency of 16%, and a high work ratio of 0.997. ©The Author 2013. Published by Oxford University Press. All rights reserved.

Everglades Ridge, Slough, and Tree Island Mosaics: Year 2 Annual Report

Status and history of the Ridge-Slough Mosaic The Florida Everglades is a large subtropical wetland with diverse hydrologic, edaphic, and vegetative characteristics. Historically, a significant portion of this system was a slow moving river originating from the Kissimmee River floodplain, flowing into the vast but shallow Lake Okeechobee, and draining south-southwest over extensive peatlands into Florida Bay (McVoy 2011). Human-induced alterations to the hydrologic regime, including reduction, stabilization, and impoundment of water flow through diversion and compartmentalization of water via canals and levees have degraded pre-drainage vegetation patterns and microtopographic structure (Davis and Ogden 1994, Ogden 2005, McVoy 2011). The Everglades peatland emerged 5,000 years ago with the stabilization of sea level at approximately current elevations (Loveless 1959, Gleason and Stone 1994). This, combined with subtropical rainfalls, allowed a vast mass of water to slowly flow over a limestone bedrock platform 160 km long and 50 km wide at a near uniform descent totaling about 6 m, ultimately reaching Florida Bay (Stephens 1956, Gleason and Stone 1994, McVoy 2011). Vegetation quickly colonized the area, and peat, in the absence of adequate respiration, accumulated on the limestone bedrock to a depth of 3-3.7 m (Gleason and Stone 1994, McVoy et al. 2011). The “River of Grass” referenced by Douglas (1947) alludes to the dually intertwined processes of the historic riverine nature of the Everglades and the vast sawgrass (Cladium jamaicense) communities that have dominated the landscape for about the last 1,000 years (Bernhardt and Willard 2009).

A new water weed, giant salvinia (Salvinia molesta), invades Lake Kyoga

Giant salvinia (Salvinia molesta) is an introduced invasive water weed in the tropics and subtropics It is a free floating weed that grows rapidly and forms extensive dense mats over still or slow moving waters.

Analysis of N-nitrosames in water using micellar electrokinetic chromatography (MEKC) and development of online and offline methods of extraction and enrichment of neutral polar analytes

Evaluation of the quality of the environment is essential for human wellness as pollutants in trace amounts can cause serious health problem. Nitrosamines are a group of compounds that are considered potential carcinogens and can be found in drinking water (as disinfection byproducts), foods, beverages and cosmetics. To monitor the level of these compounds to minimize daily intakes, fast and reliable analytical techniques are required. As these compounds are relatively highly polar, extraction and enrichment from environmental samples (aqueous) are challenging. Also, the trend of analytical techniques toward the reduction of sample size and minimization of organic solvent use demands new methods of analysis. In light of fulfilling these requirements, a new method of online preconcentration tailored to an electrokinetic chromatography is introduced. In this method, electroosmotic flow (EOF) was suppressed to increase the interaction time between analyte and micellar phase, therefore the only force to mobilize the neutral analytes is the interaction of analyte with moving micelles. In absence of EOF, polarity of applied potential was switched (negative or positive) to force (anionic or cationic) micelles to move toward the detector. To avoid the excessive band broadening due to longer analysis time caused by slow moving micelles, auxiliary pressure was introduced to boost the micelle movement toward the detector using an in house designed and built apparatus. Applying the external auxiliary pressure significantly reduced the analysis times without compromising separation efficiency. Parameters, such as type of surfactants, composition of background electrolyte (BGE), type of capillary, matrix effect, organic modifiers, etc., were evaluated in optimization of the method. The enrichment factors for targeted analytes were impressive, particularly; cationic surfactants were shown to be suitable for analysis of nitrosamines due to their ability to act as hydrogen bond donors. Ammonium perfluorooctanoate (APFO) also showed remarkable results in term of peak shapes and number of theoretical plates. It was shown that the separation results were best when a high conductivity sample was paired with a BGE of lower conductivity. Using higher surfactant concentrations (up to 200 mM SDS) than usual (50 mM SDS) for micellar electrokinetic chromatography (MEKC) improved the sweeping. A new method for micro-extraction and enrichment of highly polar neutral analytes (N-Nitrosamines in particular) based on three-phase drop micro-extraction was introduced and its performance studied. In this method, a new device using some easy-to-find components was fabricated and its operation and application demonstrated. Compared to conventional extraction methods (liquid-liquid extraction), consumption of organic solvents and operation times were significantly lower.

In situ characterization of sediment oxygen demand across the spectrum of non-resuspension to full resuspension with varying bed shear stress

Sediment oxygen demand (SOD) can be a significant oxygen sink in various types of water bodies, particularly slow-moving waters with substantial organic sediment accumulation. In most settings where SOD is a concern, the prevailing hydraulic conditions are such that the impact of sediment resuspension on SOD is not considered. However, in the case of Bubbly Creek in Chicago, Illinois, the prevailing slack water conditions are interrupted by infrequent intervals of very high flow rates associated with pumped combined sewer overflow (CSO) during intense hydrologic events. These events can cause resuspension of the highly organic, nutrient-rich bottom sediments, resulting in precipitous drawdown of dissolved oxygen (DO) in the water column. While many past studies have addressed the dependence of SOD on near-bed velocity and bed shear stress prior to the point of sediment resuspension, there has been limited research that has attempted to characterize the complex and dynamic phenomenon of resuspended-sediment oxygen demand. To address this issue, a new in situ experimental apparatus referred to as the U of I Hydrodynamic SOD Sampler was designed to achieve a broad range of velocities and associated bed shear stresses. This allowed SOD to be analyzed across the spectrum of no sediment resuspension associated with low velocity/ bed shear stress through full sediment resuspension associated with high velocity / bed shear stress. The current study split SOD into two separate components: (1) SODNR is the sediment oxygen demand associated with non-resuspension conditions and is a surface sink calculated using traditional methods to yield a value with units (g/m2/day); and (2) SODR is the oxygen demand associated with resuspension conditions, which is a volumetric sink most accurately characterized using non-traditional methods and units that reflect suspension in the water column (mg/L/day). In the case of resuspension, the suspended sediment concentration was analyzed as a function of bed shear stress, and a formulation was developed to characterize SODR as a function of suspended sediment concentration in a form similar to first-order biochemical oxygen demand (BOD) kinetics with Monod DO term. The results obtained are intended to be implemented into a numerical model containing hydrodynamic, sediment transport, and water quality components to yield oxygen demand varying in both space and time for specific flow events. Such implementation will allow evaluation of proposed Bubbly Creek water quality improvement alternatives which take into account the impact of SOD under various flow conditions. Although the findings were based on experiments specific to the conditions in Bubbly Creek, the techniques and formulations developed in this study should be applicable to similar sites.

Environmental and grazing influence on spatial variability of intertidal biofilm on subtropical rocky shores

Epilithic biofilm on rocky shores is regulated by physico-chemical and biological factors and is important as a source of food for benthic organisms. The influences of environmental and grazing pressure on spatial variability of biomass of biofilm were evaluated on shores on the north coast of São Paulo State (SE Brazil). A general trend of greater abundance of microalgae was observed lower on the shore, but neither of the environmental factors evaluated (wave exposure and shore level) showed consistent effects, and differences were found among specific shores or times (September 2007 and March 2008). The abundance of slow-moving grazers (limpets and littorinids) showed a negative correlation with chlorophyll a concentration on shores. However, experimental exclusion of these grazers failed to show consistent results at small spatial scales. Observations of divergent abundances of the isopod Ligia exotica and biomass of biofilm on isolated boulders on shores led to a short exclusion experiment, where the grazing pressure by L. exotica significantly decreased microalgal biomass. The result suggests that grazing activities of this fast-moving consumer probably mask the influence of slow-moving grazers at small spatial scales, while both have an additive effect at larger scales that masks environmental influences. This is the first evaluation of the impact of the fast-moving herbivore L. exotica on microalgal biomass on rocky shores and opens an interesting discussion about the role of these organisms in subtropical coastal environments.

Cosmic Explosions: Observations Of Infant Hydrogen-Free Supernovae Towards An Understanding Of Their Parent Systems

Radiation in the first days of supernova explosions contains rich information about physical properties of the exploding stars. In the past three years, I used the intermediate Palomar Transient Factory to conduct one-day cadence surveys, in order to systematically search for infant supernovae. I show that the one-day cadences in these surveys were strictly controlled, that the realtime image subtraction pipeline managed to deliver transient candidates within ten minutes of images being taken, and that we were able to undertake follow-up observations with a variety of telescopes within hours of transients being discovered. So far iPTF has discovered over a hundred supernovae within a few days of explosions, forty-nine of which were spectroscopically classified within twenty-four hours of discovery.

Our observations of infant Type Ia supernovae provide evidence for both the single-degenerate and double-degenerate progenitor channels. On the one hand, a low-velocity Type Ia supernova iPTF14atg revealed a strong ultraviolet pulse within four days of its explosion. I show that the pulse is consistent with the expected emission produced by collision between the supernova ejecta and a companion star, providing direct evidence for the single degenerate channel. By comparing the distinct early-phase light curves of iPTF14atg to an otherwise similar event iPTF14dpk, I show that the viewing angle dependence of the supernova-companion collision signature is probably responsible to the difference of the early light curves. I also show evidence for a dark period between the supernova explosion and the first light of the radioactively-powered light curve. On the other hand, a peculiar Type Ia supernova iPTF13asv revealed strong near-UV emission and absence of iron in the spectra within the first two weeks of explosion, suggesting a stratified ejecta structure with iron group elements confined to the slow-moving part of the ejecta. With its total ejecta mass estimated to exceed the Chandrasekhar limit, I show that the stratification and large mass of the ejecta favor the double-degenerate channel.

In a separate approach, iPTF found the first progenitor system of a Type Ib supernova iPTF13bvn in the pre-explosion HST archival mages. Independently, I used the early-phase optical observations of this supernova to constrain its progenitor radius to be no larger than several solar radii. I also used its early radio detections to derive a mass loss rate of 3e-5 solar mass per year for the progenitor right before the supernova explosion. These constraints on the physical properties of the iPTF13bvn progenitor provide a comprehensive data set to test Type Ib supernova theories. A recent HST revisit to the iPTF13bvn site two years after the supernova explosion has confirmed the progenitor system.

Moving forward, the next frontier in this area is to extend these single-object analyses to a large sample of infant supernovae. The upcoming Zwicky Transient Facility with its fast survey speed, which is expected to find one infant supernova every night, is well positioned to carry out this task.

Asymptotic throughput capacity analysis of VANETs exploiting mobility diversity

Vehicular ad hoc networks (VANETs) rely on intervehicle relay to extend the communication range of individual vehicles for message transmissions to roadside units (RSUs). With the presence of a large number of quickly moving vehicles in the network, the end-to-end transmission performance from individual vehicles to RSUs through intervehicle relaying is, however, highly unreliable due to the violative intervehicle connectivity. As an effort toward this issue, this paper develops an efficient message routing scheme that can maximize the message delivery throughput from vehicles to RSUs. Specifically, we first develop a mathematical framework to analyze the asymptotic throughput scaling of VANETs. We demonstrate that in an urban-like layout, the achievable uplink throughput per vehicle from vehicle to RSUs scales as Θ(1/ log n) when the number of RSUs scales as Θ(n/log n) with n denoting vehicle population. By noting that the network throughput is bottlenecked by the unbalanced data traffic generated by hotspots of realistic urban areas, which may overload the RSUs nearby, a novel packet-forwarding scheme is proposed to approach the optimal network throughput by exploiting the mobility diversity of vehicles to balance the data traffic across the network. Using extensive simulations based on realistic traffic traces, we demonstrate that the proposed scheme can improve the network throughput approaching the asymptotic throughput capacity.

Desafíos de la movilización social para generar transformaciones en las instituciones: la movilización fallida en Egipto periodo 2010-2013

Este estudio de caso busca evaluar los alcances y limitaciones que tiene la movilización social para lograr transformaciones en las instituciones a partir del estudio de la movilización social en Egipto durante el período 2010-2013. Se analiza y se explica en qué sentido las instituciones de movimiento lento, como las estructuras de poder y estructuras mentales, han frustrado lo acontecido en Egipto conocido como la primavera árabe. Siguiendo la perspectiva de las instituciones de Gérard Roland y Alejandro Portes, se avanza hacia el resultado de la investigación de que las instituciones de movimiento lento tienen en cuenta aspectos estructurales de una sociedad tales como el poder y la cultura. Por ello, no pueden ser cambiadas con facilidad ya que cuentan con bases sólidas que han sido construidas mediante procesos históricos fundamentados en ideologías y valores.

Side impact protection in production vehicles MDB-to-car side impact test of a 26 degree crabbed moving deformable barrier to a 1983 Mazda 626 at 33.4 mph. Test Report.

Mode of access: Internet.

Side impact protection in production vehicles: MDB-to-car side impact test of a 26 [degree] crabbed moving deformable barrier to a 1987 Nissan Sentra at 33.5 mph. Test report.

Mode of access: Internet.

Accelerated computation of cyclic steady state for simulated-moving-bed processes

Industrial applications of the simulated-moving-bed (SMB) chromatographic technology have brought an emergent demand to improve the SMB process operation for higher efficiency and better robustness. Improved process modelling and more-efficient model computation will pave a path to meet this demand. However, the SMB unit operation exhibits complex dynamics, leading to challenges in SMB process modelling and model computation. One of the significant problems is how to quickly obtain the steady state of an SMB process model, as process metrics at the steady state are critical for process design and real-time control. The conventional computation method, which solves the process model cycle by cycle and takes the solution only when a cyclic steady state is reached after a certain number of switching, is computationally expensive. Adopting the concept of quasi-envelope (QE), this work treats the SMB operation as a pseudo-oscillatory process because of its large number of continuous switching. Then, an innovative QE computation scheme is developed to quickly obtain the steady state solution of an SMB model for any arbitrary initial condition. The QE computation scheme allows larger steps to be taken for predicting the slow change of the starting state within each switching. Incorporating with the wavelet-based technique, this scheme is demonstrated to be effective and efficient for an SMB sugar separation process. Moreover, investigations are also carried out on when the computation scheme should be activated and how the convergence of the scheme is affected by a variable stepsize.