Subcritical fatigue in fuse networks

We obtain the Paris law of fatigue crack propagation in a fuse network model where the accumulated damage in each resistor increases with time as a power law of the local current amplitude. When a resistor reaches its fatigue threshold, it burns irreversibly. Over time, this drives cracks to grow until the system is fractured into two parts. We study the relation between the macroscopic exponent of the crack-growth rate -entering the phenomenological Paris law-and the microscopic damage accumulation exponent, gamma, under the influence of disorder. The way the jumps of the growing crack, Delta a, and the waiting time between successive breaks, Delta t, depend on the type of material, via gamma, are also investigated. We find that the averages of these quantities, <Delta a > and <Delta t >/< t(r)>, scale as power laws of the crack length a, <Delta a > proportional to a(alpha) and <Delta t >/< t(r)> proportional to a(-beta), where < t(r)> is the average rupture time. Strikingly, our results show, for small values of gamma, a decrease in the exponent of the Paris law in comparison with the homogeneous case, leading to an increase in the lifetime of breaking materials. For the particular case of gamma = 0, when fatigue is exclusively ruled by disorder, an analytical treatment confirms the results obtained by simulation. Copyright (C) EPLA, 2012

Association of fatigue and psychological distress with quality of life in patients with a previous venous thromboembolic event

Health-related quality of life (QoL) has been associated with several social and medical conditions in patients with deep vein thrombosis (DVT) and pulmonary embolism (PE). To the best of our knowledge, there is no study investigating the relationship of QoL with psychological variables in this patient population. We assumed as a hypothesis an association between heightened levels of fatigue and psychological distress, as well as decreased QoL in patients with an objectively diagnosed venous thromboembolic event. Study participants were 205 consecutively enrolled out-patients (47.4 years, 54.6% men) with DVT and/or PE. Approximately 10 days before blood collection for thrombophilia work-up, QoL, fatigue, and psychological distress were assessed using the Short Form Health Survey (SF-12), the Multidimensional Fatigue Symptom Inventory Short Form (MFSI-SF) as well as the Hospitality Anxiety and Depression scale (HADS). After controlling for demographic and medical factors, fatigue (p < 0.01) but not psychological distress (p>0.05) was negatively associated with physical QoL, explaining 11.0% of the variance. Fatigue (p < 0.001) and psychological distress (p < 0.001) were significant predictors of mental QoL, explaining an additional 36.2% and 3.6% of the variance. Further analyses revealed that all subscales of the HADS (e.g. anxiety and depression) and of the MFSI-SF (e.g. general fatigue, physical fatigue, emotional fatigue, mental fatigue and vigor) were significant predictors of mental QoL. MFSI-SF subscales also predicted physical QoL. The findings suggest that fatigue and psychological distress substantially predict QoL in patients with a previous venous thromboembolic event above and beyond demographic factors.

Independent association of sleep quality, fatigue, and vital exhaustion with platelet count in patients with a previous venous thromboembolic event

Elevated platelet count might reflect increased inflammation as an etiological factor for venous thromboembolism (VTE). Poor sleep, fatigue, and exhaustion are all associated with inflammation and are also common sequelae of chronic psychological stress that previously predicted increased risk of VTE. We hypothesized that platelet count would be high in patients with VTE who sleep poorly and who are fatigued and exhausted. We investigated 205 patients scheduled for thrombophilia work-up > or =3 months after an objectively diagnosed venous thromboembolic event. They completed the Jenkins Sleep Questionnaire to rate subjective sleep quality and the short forms of the Multidimensional Fatigue Symptom Inventory and Maastricht Vital Exhaustion Questionnaire. Platelet count was determined by a mechanical Coulter counter. Analyses controlled for age, sex, body mass index, time since the index event, and medication. After taking into account these covariates, poorer sleep quality (p = 0.001; DeltaR(2)= 0.046), high fatigue (p = 0.008; DeltaR(2)= 0.032), and vital exhaustion (p = 0.050; DeltaR(2)= 0.017) were all associated with elevated platelet count. In addition, high level of fatigue mediated the relationship between poor sleep quality and elevated platelet count (p = 0.046). Poor sleep quality, high levels of fatigue, and vital exhaustion were identified as correlates of an elevated platelet count in patients with a previous episode of VTE. Given the emerging role of inflammatory processes in VTE, the findings suggest a mechanism through which behavioral and chronic psychological stressors might contribute to incident and recurrent venous thrombotic events.

The moderating role of personal mastery on the relationship between caregiving status and multiple dimensions of fatigue

OBJECTIVE: A substantial proportion of chronically-stressed spousal dementia caregivers report fatigue. The objective of this study was to examine whether personal mastery moderates the relationship between caregiving status (caregiver/non-caregiver) and multiple dimensions of fatigue. METHODS: Seventy-three elderly Alzheimer's caregivers and 41 elderly non-caregivers completed the Multidimensional Fatigue Symptom Inventory-Short Form (MFSI-SF) and questionnaires assessing mastery. RESULTS: Regression analyses indicated that global fatigue was significantly higher for caregivers (M = 38.0 +/- 21.0) compared to non-caregivers (M = 18.2 +/- 10.4). However, personal mastery moderated the relation between caregiving status and global fatigue (t = -2.03, df = 107, p = 0.045), such that for those with low mastery, caregivers' fatigue scores were 18.1 points higher than non-caregivers, and for those with high mastery, this difference was only 7.5 points. For specific dimensions of fatigue, mastery moderated the relations between caregiving status and both emotional (t = -2.01, df = 107, p = 0.047) and physical (t = -2.51, df = 107, p = 0.014) fatigue. Specifically, association between caregiving status and emotional fatigue was greater when mastery was low than when mastery was high. Caregiving status was significantly associated with physical fatigue when mastery was low, but not when mastery was high. Significant main effects were found between mastery and general fatigue and vigor. CONCLUSION: Given the proportion of fatigued caregivers and the impact fatigue has on health; these findings provide important information regarding mastery's relationship with fatigue and may inform interventions aiming to alleviate fatigue in caregivers. Copyright (c) 2009 John Wiley ; Sons, Ltd.

AROUSAL, FATIGUE AND MENTAL PERFORMANCE: THE EFFECTS OF FASTING ON COGNITION

This study examined the effects of skipping breakfast on selected aspects of children's cognition, specifically their memory (both immediate and one week following presentation of stimuli), mental tempo, and problem solving accuracy. Test instruments used included the Hagen Central/Incidental Recall Test, Matching Familiar Figures Test, McCarthy Digit Span and Tapping Tests. The study population consisted of 39 nine-to eleven year old healthy children who were admitted for overnight stays at a clinical research setting for two nights approximately one week apart. The study was designed to be able to adequately monitor and control subjects' food consumption. The design chosen was the cross-over design where randomly on either the first or second visit, the child skipped breakfast. In this way, subjects acted as their own controls. Subjects were tested at noon of both visits, this representing an 18-hour fast.^ Analysis focused on whether or not fasting for this period of time affected an individual's performance. Results indicated that for most of the tests, subjects were not significantly affected by skipping breakfast for one morning. However, on tests of short-term central and incidental recall, subjects who had skipped breakfast recalled significantly more of the incidental cues although they did so at no apparent expense to their storing of central information. In the area of problem-solving accuracy, subjects skipping breakfast at time two made significantly more errors on hard sections of the MFF Test. It should be noted that although a large number of tests were conducted, these two tests showed the only significant differences.^ These significant results in the areas of short-term incidental memory and in problem solving accuracy were interpreted as being an effect of subject fatigue. That is, when subjects missed breakfast, they were more likely to become fatigued and in the novel environment presented in the study setting, it is probable that these subjects responded by entering Class II fatigue which is characterized by behavioral excitability, diffused attention and altered performance patterns. ^

Laser Shock Processing: An Emerging Technique for the Enhancement of Surface Properties and Fatigue Life of High Strength Metal Alloys

Profiting by the increasing availability of laser sources delivering intensities above 10 9 W/cm 2 with pulse energies in the range of several Joules and pulse widths in the range of nanoseconds, laser shock processing (LSP) is being consolidating as an effective technology for the improvement of surface mechanical and corrosion resistance properties of metals and is being developed as a practical process amenable to production engineering. The main acknowledged advantage of the laser shock processing technique consists on its capability of inducing a relatively deep compression residual stresses field into metallic alloy pieces allowing an improved mechanical behaviour, explicitly, the life improvement of the treated specimens against wear, crack growth and stress corrosion cracking. Following a short description of the theoretical/computational and experimental methods developed by the authors for the predictive assessment and experimental implementation of LSP treatments, experimental results on the residual stress profiles and associated surface properties modification successfully reached in typical materials (specifically steels and Al and Ti alloys) under different LSP irradiation conditions are presented

Application of high-intensity short-pulse lasers to the mechanical and surface properties improvement of high reliability metallic components by shock processing

Outline: • Introduction • Process Experimental Setup • Experimental Procedure • Experimental Results for Al2024-T351 and Ti6Al4V - Residual stresses - Tensile Strength - Fatigue Life • Discussion and Outlook - Prospects for technological applications of LSP

Aircraft accident report : collision with trees and crash short of the runway, Corporate Airlines flight 5966, BAE systems BAE-J3201, N875JX, Kirksville, Missouri, October 19, 2004 /

On October 19, 2004, about 1937 central daylight time, Corporate Airlines (doing business as American Connection) flight 5966, a BAE Systems BAE-J3201, N875JX, struck trees on final approach and crashed short of runway 36 at the Kirksville Regional Airport (IRK), Kirksville, Missouri. The flight was operating under the provisions of 14 Code of Federal Regulations Part 121 as a scheduled passenger flight from Lambert-St. Louis International Airport, in St. Louis, Missouri, to IRK. The captain, first officer, and 11 of the 13 passengers were fatally injured, and 2 passengers received serious injuries. The airplane was destroyed by impact and a post impact fire. Night instrument meteorological conditions (IMC) prevailed at the time of the accident, and the flight operated on an instrument flight rules flight plan. The National Transportation Safety Board determines that the probable cause of the accident was the pilots' failure to follow established procedures and properly conduct a nonprecision instrument approach at night in IMC, including their descent below the minimum descent altitude (MDA) before required visual cues were available (which continued unmoderated until the airplane struck the trees) and their failure to adhere to the established division of duties between the flying and nonflying (monitoring) pilot. Contributing to the accident was the pilots' failure to make standard callouts and the current Federal Aviation Regulations that allow pilots to descend below the MDA into a region in which safe obstacle clearance is not assured based upon seeing only the airport approach lights. The pilots' unprofessional behavior during the flight and their fatigue likely contributed to their degraded performance. The safety issues in this report focus on operational and human factors issues, including the pilots' professionalism and sterile cockpit procedures, nonprecision instrument approach procedures, flight and duty time regulations, fatigue, and flight data/image recorder requirements.

Randomized controlled trial of an educational intervention for managing fatigue in women receiving adjuvant chemotherapy for early-stage breast cancer

Purpose To evaluate the efficacy of a psychoeducational intervention in improving cancer-related fatigue. Patients and Methods This randomized controlled trial involved 109 women commencing adjuvant chemotherapy for stage I or II breast cancer in five chemotherapy treatment centers. Intervention group patients received an individualized fatigue education and support program delivered in the clinic and by phone over three 10- to 20-minute sessions 1 week apart. Instruments included a numeric rating scale assessing confidence with managing fatigue; 11-point numeric rating scales measuring fatigue at worst, average, and best; the Functional Assessment of Cancer Therapy-Fatigue and Piper Fatigue Scales; the Cancer Self-Efficacy Scale; the European Organisation for Research and Treatment of Cancer Quality of Life Questionnaire C30; and the Hospital Anxiety and Depression Scale. For each outcome, separate analyses of covariance of change scores between baseline (T1) and the three follow-up time points (T2, T3, and T4) were conducted, controlling for the variable's corresponding baseline value. Results Compared with the intervention group, mean difference scores between the baseline (T1) and immediate after the test (T2) assessments increased significantly more for the control group for worst and average fatigue, Functional Assessment of Cancer Therapy-Fatigue, and Piper fatigue severity and interference measures. These differences were not observed between baseline and T3 and T4 assessments. No significant differences were identified for any pre- or post-test change scores for confidence with managing fatigue, cancer self-efficacy, anxiety, depression, or quality of life. Conclusion Preparatory education and support has the potential to assist women to cope with cancer-related fatigue in the short term. However, further research is needed to identify ways to improve the potency and sustainability of psychoeducational interventions for managing cancer-related fatigue.

Fatigue crack initiation and propagation from defects in aluminium welds

Fatigue crack initiation and propagation in aluminium butt welds has been investigated. It is shown that the initiation of cracks from both buried defects and. from the weld reinforcement may be quantified by predictive laws based on either linear elastic fracture mechanics, or on Neuber's rule of stress and strain ooncentrations. The former is preferable on the grounds of theoretical models of crack tip plasticity, although either may be used as the basis of an effeotive design criteria against crack initiation. Fatigue lives fol1owing initiation were found to follow predictions based on the integration of a Paris type power law. The effect of residual stresses from the welding operation on both initiation and propagation was accounted for by a Forman type equation. This incorporated the notional stress ratio produced by the residual stresses after various heat treatments. A fracture mechanics analysis was found to be useful in describing the fatigue behaviour of the weldments at increased temperatures up to 300°C. It is pointed out, however, that the complex interaction of residual stresses, frequency, and changes in fracture mode necessitate great caution in the application of any general design criteria against crack initiation and growth at elevated. temperatures.

Examination variability in short-wavelength automated perimetry

The study evaluated sources of within- and between-subject variability in standard white-on-white (W-W) perimetry and short-wavelength automated perimetry (SWAP). The Influence of staircase strategy on the fatigue effect in W-W perimetry was investigated for a 4 dB single step, single reversal strategy; a variable step size, single reversal dynamic strategy; and the standard 4-2 dB double reversal strategy. The fatigue effect increased as the duration of the examination Increased and was greatest in the second eye for all strategies. The fatigue effect was lowest for the 4dB strategy, which exhibited the shortest examination time and was greatest for the 4-2 dB strategy, which exhibited the longest examination time. Staircase efficiency was lowest for the 4 dB strategy and highest for the dynamic strategy which thus offers a reduced examination time and low inter-subject variability. The normal between-subject variability of SWAP was determined for the standard 4-2 dB double reversal strategy and the 3 dB single reversal FASTPAC strategy and compared to that of W-W perimetry, The decrease in sensitivity with Increase in age was greatest for SWAP. The between-subject variability of SWAP was greater than W-W perimetry. Correction for the Influence of ocular media absorption reduced the between-subject variability of SWAP, The FASTPAC strategy yielded the lowest between-subject variability In SWAP, but the greatest between-subject variability In WoW perimetry. The greater between-subject variability of SWAP has profound Implications for the delineation of visual field abnormality, The fatigue effect for the Full Threshold strategy in SWAP was evaluated with conventional opaque, and translucent occlusion of the fellow eye. SWAP exhibited a greater fatigue effect than W-W perimetry. Translucent occlusion reduced the between-subject variability of W-W perimetry but Increased the between-subject variability of SWAP. The elevation of sensitivity was greater with translucent occlusion which has implications for the statistical analysis of W-W perimetry and SWAP. The influence of age-related cataract extraction and IOL implantation upon the visual field derived by WoW perimetry and SWAP was determined. Cataract yielded a general reduction In sensitivity which was preferentially greater in SWAP, even after the correction of SWAP for the attenuation of the stimulus by the ocular media. There was no correlation between either backward or forward light scatter and the magnitude of the attenuation of W-W or SWAP sensitivity. The post-operative mean deviation in SWAP was positive and has ramifications for the statistical Interpretation of SWAP. Short-wavelength-sensitive pathway isolation was assessed as a function of stimulus eccentricity using the two-colour Increment threshold method. At least 15 dB of SWS pathway Isolation was achieved for 440 nm, 450 nm and 460 nm stimuli at a background luminance of 100 cdm-2, There was a slight decrease In SWS pathway Isolation for all stimulus wavelengths with increasing eccentricity which was not of clinical significance. Adopting a 450 nm stimulus may reduce between-subject variability In SWAP due to a reduction In ocular media absorption and macular pigment absorption.

Fatigue cracking from stress concentration in mild steel

Pulsating; tension fatigue tests have been carried out on edge notched specimens of a mild steel. An electrical potential drop technique was used to determine the number of cycles taken to initiate cracks and the rate at which the cracks grew across the specimen. The results could be described by the range of stress intensity factor, which for crack initiation was modified to take account of the notch root radius. Analysis of elastic stress distributions at cracks and notches and models of plasticity at crack tips are used to discuss the results. Limited evidence in the literature indicates that the fracture mechanics approach may provide a general description of crack initiation and growth in notched specimens, and a simple graphical method of calculating fatigue lives is described. The results are used to illustrate the effects of specimen size and geometry on the fatigue life of notched specimens. The relevance of the work to the assessment of the significance of defects in welds is discussed.

Fatigue crack propagation in some PM steels

Mechanisms of fatigue crack growth have been studied for a range of PM steels at relative densities of 0.90 and 1.0, for which strength, fracture toughness, and microstructural information was also available. It is shown that the Paris exponents for steady state crack growth are between 8 and 18 when ρr is approximately 0.9 but when ρr is approximately 1.0 the exponents are between 2.6 and 4.0, i.e in the range typical of wrought steels (2-4). At both densities, threshold stress intensities are between 5.5 and 10.8 MPa m1/2 when R = 0.1. Combinations of these thresholds and yield strengths are comparable with those for wrought steels. When R = 0.8, reductions in threshold to between 2.7 and 5 MPa m1/2 are attributed to crack closure effects. At ρr = 0.90, Fe-0.5C fails by progressive rupture of sinter necks. Astaloy A, with 0.2%C and 0.6%C, and Distaloy AB-0.6C have smaller plastic zone sizes and the cracks follow more difficult paths through particles as well as necks. When ρr is approximately 1.0, fracture is partially by true fatigue modes and partly by cleavage, the bursts of cleavage being more noticeable when Kmax is high.

Fatigue in SiC-particulate-reinforced aluminium alloy composites

The fatigue behaviour in SiC-particulate-reinforced aluminium alloy composites has been briefly reviewed. The improved fatigue life reported in stress-controlled test results from the higher stiffness of the composites; therefore it is generally inferior to monolithic alloys at a constant strain level. The role of SiC particulate reinforcement has been examined for fatigue crack initiation, short-crack growth and long-crack growth. Crack initiation is observed to occur at matrix-SiC interface in cast composites and either at or near the matrix-SiC interface or at cracked SiC particles in powder metallurgy processed composites depending on particle size and morphology. The da/dN vs ΔK relationship in the composites is characterized by crack growth rates existing within a narrow range of ΔK and this is because of the lower fracture toughness and relatively high threshold values in composites compared with those in monolithic alloys. An enhanced Paris region slope attributed to the monotonic fracture contribution are reported and the extent of this contribution is found to depend on particle size. The effects of the aging condition on crack growth rates and particle size dependence of threshold values are also treated in this paper. © 1991.

Modelling short crack growth behaviour in nickel-base superalloys

This paper provides a description of the features and mechanisms of facetted short crack growth in Ni-base superalloys, and briefly reviews existing short crack growth models in terms of their application to Ni-base alloys. The concept of “soft barriers” is introduced to produce a new two-phase model for local microstructural effects on short crack growth in Waspaloy. This is derived from detailed observations of crack growth through individual grains. The model differs from all previous approaches in highlighting the importance of crack path perturbations within grains. Potential applications of the model in alloy development are discussed.