Shading effects on the yield of an Argentinian wheat cultivar

Shading treatments of 50% of the incident radiation were applied to the semidwarf wheat cultivar Leones INTA before and after anthesis in two field experiments in Argentina in 1987 and 1988. The treatments reduced biological (above-ground dry matter) yield, grain yield and number of grains/m2. Number of grains/m2 was closely and linearly correlated with ear dry weight at anthesis and with the photothermal quotient, calculated from 20 days before to 10 days after anthesis. Grain yield was sink limited, and the shading treatments reduced sink strength. The contribution of preanthesis assimilates to grain yield was smaller in the shaded crops than in the unshaded controls; in unshaded crops, almost 40% of grain yield was contributed by preanthesis assimilates whilst in preanthesis shaded crops this contribution was negligible. The proportion of preanthesis assimilates contributed to the grain was closely related to the decrease in stem dry weight during grain filling. The effects of shading on main stems and tillers were the same.

Electrical pump & probe and injected carrier losses quantification in Er doped Si slot waveguides

Electrically driven Er3+ doped Si slot waveguides emitting at 1530 nm are demonstrated. Two different Er3+ doped active layers were fabricated in the slot region: a pure SiO2 and a Si-rich oxide. Pulsed polarization driving of the waveguides was used to characterize the time response of the electroluminescence (EL) and of the signal probe transmission in 1 mm long waveguides. Injected carrier absorption losses modulate the EL signal and, since the carrier lifetime is much smaller than that of Er3+ ions, a sharp EL peak was observed when the polarization was switched off. A time-resolved electrical pump & probe measurement in combination with lock-in amplifier techniques allowed to quantify the injected carrier absorption losses. We found an extinction ratio of 6 dB, passive propagation losses of about 4 dB/mm, and a spectral bandwidth > 25 nm at an effective d.c. power consumption of 120 μW. All these performances suggest the usage of these devices as electro-optical modulators.

Assessing trends in insured losses from floods in Spain 1971-2008

Economic impacts from floods have been increasing over recent decades, a fact often attributed to a changing climate. On the other hand, there is now a significant body of scientific scholarship all pointing towards increasing concentrations and values of assets as the principle cause of the increasing cost of natural disasters. This holds true for a variety of perils and across different jurisdictions. With this in mind, this paper examines the time history of insured losses from floods in Spain between 1971 and 2008. It as- sesses whether any discernible residual signal remains after adjusting the data for the increase in the number and value of insured assets over this period of time. Data on insured losses from floods were sourced from Consorcio de Com- pensacíon de Seguros (CCS). Although a public institution, CCS compensates homeowners for the damage produced by floods, and thus plays a role similar to that of a private insurance company. Insured losses were adjusted using two proxy measures: first, changes in the total amount of annual surcharges (premiums) paid by customers to CCS, and secondly, changes in the total value of dwellings per year. The adjusted data reveals no significant trend over the period 1971-2008 and serves again to confirm that at this juncture, societal in- fluences remain the prime factors driving insured and economic losses from natural disasters.

Stochasticity in economic losses increases the value of reputation in indirect reciprocity.

Recent theory predicts harsh and stochastic conditions to generally promote the evolution of cooperation. Here, we test experimentally whether stochasticity in economic losses also affects the value of reputation in indirect reciprocity, a type of cooperation that is very typical for humans. We used a repeated helping game with observers. One subject (the "Unlucky") lost some money, another one (the "Passer-by") could reduce this loss by accepting a cost to herself, thereby building up a reputation that could be used by others in later interactions. The losses were either stable or stochastic, but the average loss over time and the average efficiency gains of helping were kept constant in both treatments. We found that players with a reputation of being generous were generally more likely to receive help by others, such that investing into a good reputation generated long-term benefits that compensated for the immediate costs of helping. Helping frequencies were similar in both treatments, but players with a reputation to be selfish lost more resources under stochastic conditions. Hence, returns on investment were steeper when losses varied than when they did not. We conclude that this type of stochasticity increases the value of reputation in indirect reciprocity.

Bernoulli correction to viscous losses: Radial flow between two parallel discs

For a massless fluid (density = 0), the steady flow along a duct is governed exclusively by viscous losses. In this paper, we show that the velocity profile obtained in this limit can be used to calculate the pressure drop up to the first order in density. This method has been applied to the particular case of a duct, defined by two plane-parallel discs. For this case, the first-order approximation results in a simple analytical solution which has been favorably checked against numerical simulations. Finally, an experiment has been carried out with water flowing between the discs. The experimental results show good agreement with the approximate solution

Using computational fluid dynamics to predict head losses in the auxiliary elements of a microirrigation sand filter

It is often assumed that total head losses in a sand filter are solely due to the filtration media and that there are analytical solutions, such as the Ergun equation, to compute them. However, total head losses are also due to auxiliary elements (inlet and outlet pipes and filter nozzles), which produce undesirable head losses because they increase energy requirements without contributing to the filtration process. In this study, ANSYS Fluent version 6.3, a commercial computational fluid dynamics (CFD) software program, was used to compute head losses in different parts of a sand filter. Six different numerical filter models of varying complexities were used to understand the hydraulic behavior of the several filter elements and their importance in total head losses. The simulation results show that 84.6% of these were caused by the sand bed and 15.4% were due to auxiliary elements (4.4% in the outlet and inlet pipes, and 11.0% in the perforated plate and nozzles). Simulation results with different models show the important role of the nozzles in the hydraulic behavior of the sand filter. The relationship between the passing area through the nozzles and the passing area through the perforated plate is an important design parameter for the reduction of total head losses. A reduced relationship caused by nozzle clogging would disproportionately increase the total head losses in the sand filter

Job losses, outsourcing and relocation: empirical evidence using microdata

Using microdata, we analyse the determinants of firm relocation and conventional outsourcing decisions as a way to reduce employment. The results for a sample of 32 countries show the relevance of factors not considered previously in the literature. Firms that are below average in quality or innovation have a higher propensity to externalise part of their production through outsourcing, while lower relative profitability and longer time to market for new products each imply a higher probability of relocation.

Eddy-current losses in rotor surface mounted permanent magnets

The aim of the work is to study the existing analytical calculation procedures found in literature to calculate the eddy-current losses in surface mounted permanent magnets within PMSM application. The most promising algorithms are implemented with MATLAB software under the dimensional data of LUT prototype machine. In addition finite elements analyze, utilized with help of Flux 2D software from Cedrat Ltd, is applied to calculate the eddy-current losses in permanent magnets. The results obtained from analytical methods are compared with numerical results.

Algorismes de shading moderns|h[Recurs electrònic] :|b implementació i comparativa

Elmercat de jocs i de pel•lícules d'entreteniment demana constantment entornsmés realistes i efectes que sorprenguin a l'espectador.Els gràfics 3D interactius (per exemple, dels jocs) han vist una evoluciósorprenent en les dues últimes dècades. Hem passat de representacions moltesquemàtiques i simplificades dels entorns, a una qualitat visual que aviatserà indistingible de la realitat. El projecte tracta de desenvolupar un motor 3D des de zero. Es podria haver utilitzatun motor 3D ja disponible com a base, com per exemple el popular Unity,però s’ha decidit crear-lo ja que això dóna l’ oportunitat de conèixer com funcionen els motoscomercials i provar noves idees. En resum, és un treball difícil, però moltenriquidor, la qual cosa comporta una gran motivacio.S’han utilitzat noves tecnologies. No només s’ha volgut desenvoluparun motor 3D des de zero, si no que s’han volgut provar noves llibreries gràfiques i nous formats de dades 3d. El mercat té força oferta de les duess, per la qualcosa s’ha aprofitat l’ oportunitat per aprendre duess tecnologies noves.El procés de desenvolupar un projecte utilitzant tecnologies desconegudes permetrà aprendre els seus punts forts i febles, podent fer-neuna anàlisi crítica, que d'altra manera no es tindria.Finalment, s’ha implementat i comparat quatre algorismes de shading.La selecció dels quatre algorismes ha estat en base a les diferentsnecessitats que intenten cobrir. El primer, el Forward Shading, és l'algorismeclàssic, utilitzat des de fa dècades, però que teòricament escala malament respecte a la quantitat de llums. El segon, el Deferred Shading, teòricament,escala molt bé amb moltes llums, però té un cost base elevat, i un consum altde memòria. El tercer, el Deferred Lighting, és una variació de l'anterior queintenta reduir el cost base i l'úss de memòria. L'últim, el Inferred Lighting,intenta explotar la baixa freqüència de la il•luminació dels entorns 3D, persuportar una gran quantitat de llums amb un molt bon rendiment.Un cop implementats aquests quatre algorismes, s’han pogut compararrespecte el seu ús de la GPU, i el seu comportament en diferents tipusd'escenes, per tal de tenir una visió global de quin algorisme és adequat encada situació

Initial development and gas exchange of Talisia subalbens (Mart.) Radlk. under different shading conditions

Ecophysiological studies under semi-controlled conditions in nurseries and greenhouses are essential to enable the use of native species to recover degraded areas and for commercial planting. Talisia subalbens (Mart) Radlk, 'cascudo', is a native fruiting species of the Cerrado on the verge of extinction. The ecophysiological performance of this species was evaluated in nursery conditions under different levels of shading (full sunshine, 30%, 50% and 70%). Initial growth, biomass allocation, gas exchange and chlorophyll content of the plants were analyzed. Full sunshine cultivated plants showed a higher accumulation of total, shoot, and root dry biomass. There was no significant difference in the root/shoot ratio among the treatments. Seedlings cultivated under full sunshine and 30% shading showed higher values for height, basal diameter, and leaf area. Differences in stomata conductance and photosynthesis rate were not observed among the different shading levels. Plants cultivated under 70% of shading had higher contents of chlorophyll a, b, and total. During the initial phase with higher levels of radiation were fundamental for the development of T. subalbens seedlings.

Influence of the sample area in the variability of losses in the mechanical harvesting of soybeans

The mechanical harvesting is an important stage in the production process of soybeans and, in this process; the loss of a significant number of grains is common. Despite the existence of mechanisms to monitor these losses, it is still essential to use sampling methods to quantify them. Assuming that the size of the sample area affects the reliability and variability between samples in quantifying losses, this paper aimed to analyze the variability and feasibility of using different sizes of sample area (1, 2 and 3 m²) in quantifying losses in the mechanical harvesting of soybeans. Were sampled 36 sites and the cutting losses, losses by other mechanisms of the combine and total losses were evaluated, as well as the water content in seeds, straw distribution and crop productivity. Data were subjected to statistical analysis (descriptive statistics and analysis of variance) and Statistical Control Process (SCP). The coefficients of variation were similar for the three frames available. Combine losses showed stable behavior, whereas cutting losses and total losses showed unstable behavior. The frame size did not affect the quantification and variability of losses in the mechanical harvesting of soybeans, thus a frame of 1 m² can be used for determining losses.

Financial losses in pork supply chain: a study of the pre-slaughter handling impacts

Brazil is amongst the world’s largest swine producers. However, its competitiveness has been vulnerable due to a lack of cooperation between the supply chain players. This condition makes the financial losses to be evaluated taking into account only an individual node, and most of the time, these damages are imputed by swine breeders. Living weight losses occur between the farm to slaughterhouses, and the main cause of these losses is the pre-slaughter handling, especially during animal transportation. In this research, we analyzed the pre-slaughter handling in a swine farm in Brasilândia, MS, Brazil. Analyzed data were provided by five slaughterhouses (farm clients) from the studied region, in which it was considered living weight losses, carcass bruising, animal injury, and death rate. The results indicated that total financial losses represent 160 thousand dollars per year, when taking into account the supply chain management.

Natural shading and productivity index of broiler chickens

The appropriate use of natural resources in the design of broiler houses provides a reduction in farming operating costs and optimization of production conditions. Therefore, the natural shading around the broiler house can be an alternative for improving internal conditions of comfort. This study verified the efficiency of natural shading in the broiler productivity index (PI) in East-West oriented commercial housings. The PI of 32 commercial broiler houses in five flocks divided throughout a year was compared. The sheds had the same management, density and the same structural features, except from tree shading: on the North face; on the South face; on both faces and without shading. It was observed that broiler house in East-West direction with shading on the South face had higher productivity index compared to houses with shading only on the North face or on both sides, between autumn and spring. For the summer period, sheds without shading showed productivity indexes superior to others.