Tolerância de perdas de solo na bacia do rio Itiquira, Mato Grosso, Brasil

The geographic area of the present study corresponds to the basin of the Itiquira river high course (Figure 1), in the portion that extends from the tributaries of its source, in the east of the plateau Correntes/Itiquira, in the neighbourhoods the city of Alto Garç as, to the scarp of the São Jerônimo mountain range, toward the west of Itiquira, in the state of Mato Grosso, totalizing 5,361 km 2. The area is placed in the eastern part of the Alto Paraguai basin, in the western portion of the Paraná Sedimentary Basin plateau. Through GIS techniques, it was possible to asses total soil losses from the Itiquira river basin, considering the years of 1966, 1985 and 1996, being based on the Universal Soil Loss Equation. Thus, in 1966 the basin lost 201,546.94 ton of soil, with an average loss of 0.37 ton/ha/year. Considering that the total area of the Itiquira river basin is of 536,100 ha, while in 1985 the soil losses had passed to 1,760,833.40 ton, with an increase of approximately 8.5 times. The average of soil losses in 1985 was of 3.28 ton/ha/year. In 1996 the basin lost 1,662,043.24 ton, with a reduction of only 9.4% in relation to 1985 but, in relation the 1966, the increase continued in the order of 8 times. The average losses per hectare in this year was in the order of 3.10 ton/ha/year (Chart 1). The map of potential of the laminar erosion for 1966 (Figure 3), shows to the highest values in small areas, situated in the northeast of the area, in Alto Garças, with values between 10 the 20 ton/ha/year and some spots in sources of the Itiquira and Ariranha rivers, with values between 1 the 5 ton/ha/year. In a general way, however, the area presents low soil loss for laminar erosion in this year, with inferior values to 1 ton/ha/year. The higher class of erosion, over 10 ton/ha/year, occupied 2,947 ha in 1966. In the year of 1985 (Figure 4), the erosive process spread over the entire studied area, and the class of erosion over of 10 ton/ha/year, already started to occupy 78,437 ha, implying an increase of approximately 27 times in 19 years. A strong increment in the erosive process was noticed in the western part of the area, to along the BR-163 road, exactly where great areas of natural vegetation (open pasture) had been transformed in culture and pasture areas. In the north-eastern part of the area it was also noticed an increment in the erosive process in agreement with the increase of culture areas and reduction of the natural areas, but it was not of so intense form as in the western portion of the area. In the year of 1996 (Figure 5), the class of erosion over of 10 ton/ha/year had diminished for a total of 53.499 ha noticing a retraction of the erosive process in the western part of the area, alongside the BR-163 road. On the other hand, it occurred a strong increment in the northern part of the area, in the neighbourhoods of the city of Alto Garças, alongside the BR-364 road and part of the MT-040 road. In a general way, in the outskirts of the city of Itiquira, in the central part of the area, it was verified an increase of the amount of zones with erosion between 0-1 ton/ha/year, passing to the immediately superior class, of 1-3 ton/ha/year; scarce data of hydrosedimentology in the UHE Itiquira (1999), shows good agreement with the values gotten for the EUPS (Chart 2). Based on the hydric classification proposal for FAO (1967) (Chart 3), it is noticed that areas with high degree of erosion (> 50) in the analysed area are very restricted, occupying 493 ha in 1985 and 332 ha in 1996 (Chart 4). In 1996 appeared as isolated spots in the north of Itiquira and Alto Garças, however beyond limits of the Itiquira river basin. These areas require special cares in its use as agricultural areas. Aiming at identifying and indicating the areas of potential risk of erosion and that need implementation of conservation practices, it was elaborated the map of limit of tolerance to the soil losses. In 1966 (Figure 6), areas with soil losses over of the tolerable were restricted to small spots located in the eastern part of the area, occupying 0.43% of the total of the area; already in 1985 (Figure 7), this percentage passed to 5.86%, spreading for all the area; in 1996 (Figure 8) it is observed a fast reduction of the areas with soil losses over of the tolerance limit, passing 5.43% of the total of the area. All the areas with losses over of the tolerable value must be considered as risk areas and were done in these areas studies for implementation of conservation practices.

Facies sedimentares e ambientes deposicionais da Formação Barbalha no vale do cariri, bacia do araripe, nordeste do Brasil

The Aptian Barbalha Formation represents the first unit of the post-rift sequence of the Araripe Basin and crops out at the slopes of the Aranpe plateau in the eastern part ot Aranpe Basin. The unit has also been named Kio da Batateira Formation, but this name is here used in its original definition as Batateira Beds, an interval of great lateral continuity and characterized by the presence of bituminous shales of the Alagoas Stage (P-270 palynological biozone). This paper presents the results of a stratigraphic analysis carried out along the outcrop belt in order to establish the facies architecture and to interpret deposicional environments of the siliciclastic Barbalha Formation. Detailed stratigraphic vertical sections were measured and correlated. They allowed the recognition of two depositional sequences characterized by fining upward arrangement of facies, beginning with fluvial deposits and ending with lacustrine deposits at their tops. The end of the first cycle is represented by black shales and brecciated limestones of the Batateira Beds that record a geologic event of regional magnitude and serve as meaningful long-distance stratigraphic mark. The second deposicional sequence overlies disconformably the Batateira Beds and begins with clast-supported conglomerates, which are covered by a succession of fluvial sandstones and minor intervals of pelitic rocks. The sandstone content diminishes towards the top and the upper part of the unit is characterized by the presence of ostracode-rich green shales. The Barbalha Formation is conformably overlaid by Late Aptian lacustrine limestones belonging to the Crato Member of the Santana Formation.

Diques clásticos na formação corumbataí (p) no nordeste da bacia do paraná, SP: Análise sistemática e significações estratigráficas, sedimentológicas e tectônicas

This paper aims to present the results of systematic survey on clastic dykes in the Corumbataí Formation (Permian), in the northeast region of the State of São Paulo. Besides this, the paper analyses genetic aspects of those features as well as their stratigraphic and sedimentologic implications in terms of geologic evolution of the northeastern Paraná Sedimentary Basin during Permian times. The field works had been developed in 3 main Corumbataí Formation outcrops (2 road cuts and a quarry) supposed to show the most important clastic dikes occurrences in the studied area. Basically, the sedimentary intrusions are formed by fine sand or silt size particles and had penetrated host rocks as near-vertical, centimeter thick, dykes (most common form) or as horizontal sheets, forming clastic sills (subsidiary form), both with variable geometric forms and dimensions. A lot of dyke walls show undulations suggesting pre-diagenetic clastic intrusions, probably near the ancient depositional surface. Almost all intrusions occur in the superior third portion of the Corumbataí Formation and some similar features seem to appear in the adjoining superposed Pirambóia Formation base. In this article the authors defend a seismic origin hypothesis for the clastic intrusions. It is important to mention that clastic intrusions tend to occur linked to expressive seismic events, with magnitude upper to 5. The analysis of isopach maps of the Permian and Mesozoic units of the Paraná Sedimentary Basin in the study area suggests a depositional system changing, from epicontinental sea conditions to shallow platform and, finally, to coastal deserts. Probably, this environmental change was driven by regional uplift accompanied by seismic events. It is possible that ancient seismicity triggered liquefaction processes and the resulting clastic intrusions. In this sense, those clastic features might be properly namedseismites.

Grupo itararé (P - C da bacia do Paraná) nas regiões de Limeira e Piracicaba - SP: Contribuição ao estudo das litofácies

The Permian-Carboniferous Itararé Group is one complexe lithostratigraphic unit of the Paraná Basin, southeastern Brazil, typically marked by discontinuity of its lithofacies. Under the exploratory point of view, the unit represents one of the most significant intervals of the basin, since several occurrences of mineral and energetic resources are associated to it, as groundwater, petroleum and coal. The prospection and exploitation of these resources depend on a good understanding of the stratigraphic architecture and the paleogeography. There are many contributions on the specialized literature which deal with this subject, although the regions of Limeira and Piracicaba (superior portion of the unit) still lack new investigations, which may contribute to the understanding of its lithofacies and related sedimentary processes. It was analyzed the sedimentary sets pilling up, followed by stratigraphic correlations between the two regions. Moreover, from sedimentary structures, it was made paleocurrent measurement with the purpose of obtaining indicative patterns of the sedimentary polarity, contributing for the comprehension of the paleogeography. Recent studies in the Domo de Pitanga region (between Rio Claro and Piracicaba cities) and in the Corumbataí river drainage basin, were taken also as basis for possible correlations. It was obtained a frame of the lithofacies arrangement, their vertical and lateral relations, as well as their depositional polarities.

Evolução do rifteamento e paleogeografia da margem Atlântica Equatorial do Brasil: Triássico ao Holoceno

The Equatorial Atlantic Margin evolved from three rift systems recorded by a complex set of sedimentary basins developed since Upper Triassic to the Lower Cretaceous (Albian). The first rift system formed Foz do Amazonas Basin in Upper Triassic; the second phase formed Marajó Basin in Berriasian, a new rift in Foz do Amazonas Basin in Valanginian and Bragança-Viseu, Ilha Nova, São Luís e Barreirinhas basins in Aptian; the third phase formed Barreirinhas and Pará- Maranhão basins and a new rifting in the Foz do Amazonas Basin between the Aptian and Albian and evolved to continental break up. The main paleostress field during rift evolution was NE-SW and after the continental break up took the E-W direction, from the development of transform zones in the oceanic crust. From Miocene, South America was subjected to intraplate tectonics, which resulted in formation of E-W transcurrent faults that generated transtensive and transpressive segments that formed sedimentary basins and hills, resulting in changes in the drainage network. In Quaternary the landscape was modified by the last ice age that changed the sea level; the coastal drainage network was drowning resulting in the formation of the current line coast.

Polarização induzida aplicada no estudo de ocorrencia de cobre localizada a nordeste de Caçapava do Sul (RS)

Mineral research works are fundamentals for recognition and incorporation of new reserves. This paper present an integrated analysis of geologic and metallogenetics data, with results gotten from the application of the Induced Polarization geophysical method, in an copper ore occurrence, inserted in Camaquã sedimentary basin, situated in northeast of Caçapava do Sul city (RS). In area ocurr arkosean arenites average coarse, the intensely silicified and recrystallized, pertaining to Passo da Promessa Formation. The presence of azurita and malachite in breakings and high porosity zones of the host rock characterizes the mineral occurrence in surface, located in the crossing two fault families. The inversion models indicate the predominance of high chargeability in vulcanics tuff, rock of high porosity in relation to the andesites and metaconglomerates gifts in the area. The strong structural control of the mineral occurrence associated the high chargeability in volcanic tuff is indications of the hydrothermal fluid access by means of faults, until rocks with great porosity, where it occurred disseminations of copper sulfides in depth and carbonates in surface.

Zoneamento geoambiental da região compreendida pelas folhas topográficas São José dos Campos e Jacareí-SP

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Vulnerabilidade natural à poluição dos recursos hídricos subterrâneos da área de Araraquara (SP)

Pós-graduação em Geociências e Meio Ambiente - IGCE

Uma contribuição ao conhecimento geomorfológico da região de Cássia, sudoeste de Minas Gerais

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Avaliação da taxa de remoção de material dissolvido devido ao intemperismo químico da formação Serra Geral na bacia do Ribeirão Preto

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Correlação entre dados geofísicos e geológicos em ocorrência de cobre localizada na bacia sedimentar do Camaquã - RS

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

O relevo e o sistema de afastamento e tratamento de esgoto da cidade de Marília-SP

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Estudo dos altos estruturais de Pitanga, Artemis, Pau D'Alho e Jibóia (flanco nordeste da bacia sedimentar do Paraná), através dos métodos geofísicos da gravimetria e magnetometria terrestres

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Hidrogeologia e hidroquímica do Sistema Aqüífero Guarani na porção ocidental da bacia sedimentar do Paraná

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Geomorfologia fluvial, mudanças ambientais e evolução do megaleque do Rio São Lourenço, quaternário do pantanal mato-grossense

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)