The normative dimension of social life from a second-person perspective

This thesis argues that insofar as we want to account for the normative dimension of social life, we must be careful to avoid construing that normative dimension in such a way as to exclude that which the second-person perspective reveals is important to social life and our ability to participate in it.¦The second-person perspective reveals that social life ought to be understood as a mix or balance of the regular and the irregular, where, in addition, those one interacts with are always to some extent experienced as other in a way that is neither immediately, nor perhaps ultimately, understandable. For persons to be able to participate in social life, conceived of in this way, they must have abilities that allow them to be, to some extent, hesitant and tentative in their relations with others, and thus tolerant of ambiguity, uncertainty and unpredictability, and responsive to and capable of learning from the otherness of others in the course of interacting with them.¦Incorporating the second-person perspective means we have to make some changes to the way we think about the normative in general, and the normative dimension of social life in particular. It does not mean giving up on the distinction between the normative and the regular - that continues to be fundamentally important but it does mean not excluding, as part of social life and as worthy of explanation, all that which is irregular. A radical way of putting it would be to say that there must be a sense in which the irregular is part of the normative. A less radical way, and the way adopted by this thesis, is to say that any account of the normative dimension of social life must not be such as to exclude the importance of irregularity from social life. This will mean 1) not characterising conventions, norms and rules as determinants of appropriateness and inappropriateness; 2) not thinking of them as necessary; 3) not thinking of them as necessarily governing minds; and 4) not thinking of them as necessarily shared.¦-¦L'argument principal de la thèse est que, pour rendre compte de la dimension normative de la vie sociale, il faut veiller à ne pas exclure la perspective de la deuxième personne - une perspective importante pour comprendre la vie sociale et la capacité requise pour y participer.¦Cette perspective nous permet d'imaginer la vie sociale comme un mélange ou un équilibre entre le régulier et l'irrégulier, l'interaction entre des individus pouvant être appréhendée comme l'expérience de chaque personne avec «l'autre» d'une manière qui n'est pas immédiatement compréhensible, et qui ne peut pas, peut-être, être ultimement comprise. Pour participer à la vie sociale, l'on doit avoir la capacité de rester hésitant et «réactif» dans ses relations avec les autres, de rester ouvert à leur altérité et de tolérer l'ambiguïté, l'incertitude et l'imprévisibilité des interactions sociales.¦Adopter une perspective «à la deuxième personne» conduit à une autre manière de penser la normativité en général, et la dimension normative de la vie sociale en particulier. Cela ne veut pas dire qu'il faut abandonner la distinction entre le normatif et le régulier - une distinction qui garde une importance fondamentale - mais qu'il faut reconnaître l'irrégulier comme faisant partie de la vie sociale et comme étant digne, en tant que tel, d'être expliqué. Une conception radicale pourrait même concevoir l'irrégulier comme faisant partie intégrante de la normativité. Une approche moins radicale, qui est celle adoptée dans cette thèse, est de dire que tout compte-rendu de la dimension normative de la vie sociale doit prendre en considération l'importance de l'irrégularité dans la vie sociale. Une telle approche implique que les conventions, normes et règles (1) ne déterminent pas ce qui est approprié ou inapproprié; (2) ne sont pas toujours nécessaires ; (3) ne gouvernent pas le fonctionnement de l'esprit ; et (4) ne sont pas nécessairement partagées.

Decision-theoretic analysis of forensic sampling criteria using Bayesian decision networks

Sampling issues represent a topic of ongoing interest to the forensic science community essentially because of their crucial role in laboratory planning and working protocols. For this purpose, forensic literature described thorough (Bayesian) probabilistic sampling approaches. These are now widely implemented in practice. They allow, for instance, to obtain probability statements that parameters of interest (e.g., the proportion of a seizure of items that present particular features, such as an illegal substance) satisfy particular criteria (e.g., a threshold or an otherwise limiting value). Currently, there are many approaches that allow one to derive probability statements relating to a population proportion, but questions on how a forensic decision maker - typically a client of a forensic examination or a scientist acting on behalf of a client - ought actually to decide about a proportion or a sample size, remained largely unexplored to date. The research presented here intends to address methodology from decision theory that may help to cope usefully with the wide range of sampling issues typically encountered in forensic science applications. The procedures explored in this paper enable scientists to address a variety of concepts such as the (net) value of sample information, the (expected) value of sample information or the (expected) decision loss. All of these aspects directly relate to questions that are regularly encountered in casework. Besides probability theory and Bayesian inference, the proposed approach requires some additional elements from decision theory that may increase the efforts needed for practical implementation. In view of this challenge, the present paper will emphasise the merits of graphical modelling concepts, such as decision trees and Bayesian decision networks. These can support forensic scientists in applying the methodology in practice. How this may be achieved is illustrated with several examples. The graphical devices invoked here also serve the purpose of supporting the discussion of the similarities, differences and complementary aspects of existing Bayesian probabilistic sampling criteria and the decision-theoretic approach proposed throughout this paper.

Large multi-gene phylogenetic trees of the grasses (Poaceae): progress towards complete tribal and generic level sampling.

In this paper we included a very broad representation of grass family diversity (84% of tribes and 42% of genera). Phylogenetic inference was based on three plastid DNA regions rbcL, matK and trnL-F, using maximum parsimony and Bayesian methods. Our results resolved most of the subfamily relationships within the major clades (BEP and PACCMAD), which had previously been unclear, such as, among others the: (i) BEP and PACCMAD sister relationship, (ii) composition of clades and the sister-relationship of Ehrhartoideae and Bambusoideae + Pooideae, (iii) paraphyly of tribe Bambuseae, (iv) position of Gynerium as sister to Panicoideae, (v) phylogenetic position of Micrairoideae. With the presence of a relatively large amount of missing data, we were able to increase taxon sampling substantially in our analyses from 107 to 295 taxa. However, bootstrap support and to a lesser extent Bayesian inference posterior probabilities were generally lower in analyses involving missing data than those not including them. We produced a fully resolved phylogenetic summary tree for the grass family at subfamily level and indicated the most likely relationships of all included tribes in our analysis.

A critical application of securitization theory: overcoming the normative dilemma of writing security

This article addresses the normative dilemma located within the application of `securitization,’ as a method of understanding the social construction of threats and security policies. Securitization as a theoretical and practical undertaking is being increasingly used by scholars and practitioners. This scholarly endeavour wishes to provide those wishing to engage with securitization with an alternative application of this theory; one which is sensitive to and self-reflective of the possible normative consequences of its employment. This article argues that discussing and analyzing securitization processes have normative implications, which is understood here to be the negative securitization of a referent. The negative securitization of a referent is asserted to be carried out through the unchallenged analysis of securitization processes which have emerged through relations of exclusion and power. It then offers a critical understanding and application of securitization studies as a way of overcoming the identified normative dilemma. First, it examines how the Copenhagen School’s formation of securitization theory gives rise to a normative dilemma, which is situated in the performative and symbolic power of security as a political invocation and theoretical concept. Second, it evaluates previous attempts to overcome the normative dilemma of securitization studies, outlining the obstacles that each individual proposal faces. Third, this article argues that the normative dilemma of applying securitization can be avoided by firstly, deconstructing the institutional power of security actors and dominant security subjectivities and secondly, by addressing countering or alternative approaches to security and incorporating different security subjectivities. Examples of the securitization of international terrorism and immigration are prominent throughout.

The Security Council and the Legitimacy of the Use of Force: Legal, Normative, and Social Aspects.

Tal i com estableix la Carta de les Nacions Unides, el Consell de Seguretat determina l’existència d’una amenaça a la pau, un trencament de la pau o un acte d’agressió i decideix les mesures que han de fer-se servir per restaurar la pau i seguretat internacionals, també l’ús de la força. L’objectiu d’aquest article és explorar la legitimitat d’aquest ús de la força. Amb aquest objectiu, el text parteix d’una definició centrada en les seves dimensions legal, normativa i social. En segon lloc, s’analitzarà com aquestes dimensions estan representades als debats del Consell de Seguretat de la guerra d’Irak de 2003, un dels usos de la força més controvertits i que més debat ha generat als darrers anys. Finalment, l’anàlisi proposat permet treure algunes conclusions sobre les bases canviants de la legitimitat de l’ús de la força.

Interpolation and sampling in small Bergman spaces

"Vegeu el resum a l'inici del document del fitxer adjunt."

Spin-labeling coronary MR angiography with steady-state free precession and radial k-space sampling: initial results in healthy volunteers.

The purpose of this study was to prospectively compare free-breathing navigator-gated cardiac-triggered three-dimensional steady-state free precession (SSFP) spin-labeling coronary magnetic resonance (MR) angiography performed by using Cartesian k-space sampling with that performed by using radial k-space sampling. A new dedicated placement of the two-dimensional selective labeling pulse and an individually adjusted labeling delay time approved by the institutional review board were used. In 14 volunteers (eight men, six women; mean age, 28.8 years) who gave informed consent, signal-to-noise ratio (SNR), contrast-to-noise ratio (CNR), vessel sharpness, vessel length, and subjective image quality were investigated. Differences between groups were analyzed with nonparametric tests (Wilcoxon, Pearson chi2). Radial imaging, as compared with Cartesian imaging, resulted in a significant reduction in the severity of motion artifacts, as well as an increase in SNR (26.9 vs 12.0, P < .05) in the coronary arteries and CNR (23.1 vs 8.8, P < .05) between the coronary arteries and the myocardium. A tendency toward improved vessel sharpness and vessel length was also found with radial imaging. Radial SSFP imaging is a promising technique for spin-labeling coronary MR angiography.

Solid phase microextraction as a short-term sampling technique for BTEX occupational exposure

Solid phase microextraction (SPME) has been widely used for many years in various applications, such as environmental and water samples, food and fragrance analysis, or biological fluids. The aim of this study was to suggest the SPME method as an alternative to conventional techniques used in the evaluation of worker exposure to benzene, toluene, ethylbenzene, and xylene (BTEX). Polymethylsiloxane-carboxen (PDMS/CAR) showed as the most effective stationary phase material for sorbing BTEX among other materials (polyacrylate, PDMS, PDMS/divinylbenzene, Carbowax/divinylbenzene). Various experimental conditions were studied to apply SPME to BTEX quantitation in field situations. The uptake rate of the selected fiber (75 microm PDMS/CAR) was determined for each analyte at various concentrations, relative humidities, and airflow velocities from static (calm air) to dynamic (> 200 cm/s) conditions. The SPME method also was compared with the National Institute of Occupational Safety and Health method 1501. Unlike the latter, the SPME approach fulfills the new requirement for the threshold limit value-short term exposure limit (TLV-STEL) of 2.5 ppm for benzene (8 mg/m(3))

Active Learning of Very-High Resolution Optical Imagery with SVM: Entropy vs Margin Sampling

An active learning method is proposed for the semi-automatic selection of training sets in remote sensing image classification. The method adds iteratively to the current training set the unlabeled pixels for which the prediction of an ensemble of classifiers based on bagged training sets show maximum entropy. This way, the algorithm selects the pixels that are the most uncertain and that will improve the model if added in the training set. The user is asked to label such pixels at each iteration. Experiments using support vector machines (SVM) on an 8 classes QuickBird image show the excellent performances of the methods, that equals accuracies of both a model trained with ten times more pixels and a model whose training set has been built using a state-of-the-art SVM specific active learning method

Comparison between splenic and lymph node aspirations as sampling methods for the parasitological detection of Leishmania chagasi infection in dogs

The sensitivities of spleen and lymph node cultures for the diagnosis of canine visceral leishmaniasis were compared in 64 anti-Leishmania antibody positive dogs from an endemic area in Brazil. The sensitivity of spleen cultures for Leishmania detection was 97.9%; in lymph node cultures it was 25%. Positive spleen culture was more frequent (p = 0.048, Fisher's exact probability test) in symptomatic (28 out of 33 animals) than in asymptomatic animals (19 out of 31 animals). These results support the use of spleen instead of lymph node aspiration as the choice method for the parasitological diagnosis of the infection.

Which European Public Sphere? Normative Standards and Empirical Insights from Multilingual Switzerland

Since the beginning of the 1990s, the EU has been increasingly criticised for its democratic deficit, which is intrinsically linked to the absence of a public sphere at the European level. Whereas scholars consider the emergence of such a public sphere as a necessary requirement for the democratisation of the EU, they disagree on the conceptualisation and normative requirements for a meaningful public sphere at the European level. This article takes an empirical perspective and draws on the nation-state context of multilingual Switzerland to get insights into what a European public sphere might realistically look like. Based on a content analysis of the leading quality paper from each German- and French-speaking Switzerland by means of political claims analysis, it shows that three of the most often cited criteria for a European public sphere - horizontal openness and interconnectedness, shared meaning structures, and inclusiveness - are hardly met in the Swiss context. On this basis, it concludes that the normative barrier for finding a European public sphere might be unrealistically high and should be reconsidered.

Ascending aorta measurements as assessed by ECG-gated multi-detector computed tomography : a pilot study to etablish normative values for transcatheters therapies

Rapport de synthèse : Mesures de l'aorte ascendante par scanner synchronisé au rythme cardiaque: une étude pilote pour établir des valeurs normatives dans le cadre des futures thérapies par transcathéter. Objectif : L'objectif de cette étude est d'établir les valeurs morphométriques normatives de l'aorte ascendante à l'aide de l'angiographie par scanner synchronisé au rythme cardiaque, afin d'aider au développement des futurs traitements par transcathéter. Matériels et méthodes : Chez soixante-dix-sept patients (âgé de 22 à 83 ans, âge moyen: 54,7 ans), une angiographie par scanner synchronisé au rythme cardiaque a été réalisée pour évaluation des vaisseaux coronaires. Les examens ont été revus afin d'étudier l'anatomie de la chambre de chasse du ventricule gauche jusqu'au tronc brachio-céphalique droit. A l'aide de programmes de reconstructions multiplanaires et de segmentation automatique, différents diamètres et longueurs considérés comme importants pour les futurs traitements par transcathéter ont été mesurés. Les valeurs sont exprimées en moyennes, médianes, maximums, minimums, écart-types et en coefficients de variation. Les variations de diamètre de l'aorte ascendante durant le cycle cardiaque ont été aussi considérées. Résultats : Le diamètre moyen de la chambre de chasse du ventricule gauche était de 20.3+/-3.4 mm. Au niveau du sinus coronaire de l'aorte, il était de 34.2+/-4.1 mm et au niveau de la jonction sinotubulaire il était de 29.7+/-3.4 mm. Le diamètre moyen de l'aorte ascendante était de 32.7+/-3.8 mm. Le coefficient de variation de ces mesures variait de 12 à 17%. La distance moyenne entre l'insertion proximale des valvules aortiques et le départ du tronc brachio-céphalique droit était de 92.6+/-11.8 mm. La distance moyenne entre l'insertion proximale des valvules aortiques et l'origine de l'artère coronaire proximale était de 12.1+/-3.7 mm avec un coefficient de variation de 31%. La distance moyenne entre les deux ostia coronaires était de 7.2+/-3.1 mm avec un coefficient de variation de 43%. La longueur moyenne du petit arc de l'aorte ascendante entre l'artère coronaire gauche et le tronc brachio-céphalique droit était de 52.9+/-9.5 mm. La longueur moyenne de la continuité fibreuse entre la valve aortique et la valvule mitrale antérieure était de 14.6+/-3.3 mm avec un coefficient de variation de 23%. L'aire moyenne de la valve aortique était de 582.0+/-131.9 mm2. La variation du diamètre antéro-postérieur et transverse de l'aorte ascendante était respectivement de 8.4% et de 7.3%. Conclusion Il existe d'importantes variations inter-individuelles dans les mesures de l'aorte ascendante avec cependant des variations intra-individuelles faibles durant le cycle cardiaque. De ce fait, une approche personnalisée pour chaque patient est recommandée dans la confection des futures endoprothèses de l'aorte ascendante. Le scanner synchronisé au rythme cardiaque jouera un rôle prépondérant dans le bilan préthérapeutique. Abstract : The aim of this study was to provide an insight into normative values of the ascending aorta in regards to novel endovascular procedures using ECG-gated multi-detector CT angiography. Seventy-seven adult patients without ascending aortic abnormalities were evaluated. Measurements at relevant levels of the aortic root and ascending aorta were obtained. Diameter variations of the ascending aorta during cardiac cycle were also considered. Mean diameters (mm) were as follows: LV outflow tract 20.3+/-3.4, coronary sinus 34.2+/-4.1, sinotubular junction 29.7+-3.4 and mid ascending aorta 32.7+/-3.8 with coefficients of variation (CV) ranging from 12 to 17%. Mean distances (mm) were: from the plane passing through the proximal insertions of the aortic valve cusps to the right brachio-cephalic artery (BCA) 92.6111.8, from the plane passing through the proximal insertions of the aortic valve cusps to the proximal coronary ostium 12.1+/-3.7, and between both coronary ostia 7.2+/-3.1, minimal arc of the ascending aorta from left coronary ostium to right BCA 52.9 X9.5, and the fibrous continuity between the aortic valve and the anterior leaflet of the mitral valve 14.óf3.3, CV 13-43%. Mean aortic valve area was 582+-131.9 mm2. The variations of the antero-posterior and transverse diameters of the ascending aorta during the cardiac cycle were 8.4% and 7.3%, respectively. Results showed large inter-individual variations in diameters and distances but with limited intra-individual variations during the cardiac cycle. A personalized approach for planning endovascular devices must be considered.