One-dimensional models for organic magnetic materials

In the preparation of small organic paramagnets, these structures may conceptually be divided into spin-containing units (SCs) and ferromagnetic coupling units (FCs). The synthesis and direct observation of a series of hydrocarbon tetraradicals designed to test the ferromagnetic coupling ability of m-phenylene, 1,3-cyclobutane, 1,3- cyclopentane, and 2,4-adamantane (a chair 1,3-cyclohexane) using Berson TMMs and cyclobutanediyls as SCs are described. While 1,3-cyclobutane and m-phenylene are good ferromagnetic coupling units under these conditions, the ferromagnetic coupling ability of 1,3-cyclopentane is poor, and 1,3-cyclohexane is apparently an antiferromagnetic coupling unit. In addition, this is the first report of ferromagnetic coupling between the spins of localized biradical SCs.

The poor coupling of 1,3-cyclopentane has enabled a study of the variable temperature behavior of a 1,3-cyclopentane FC-based tetraradical in its triplet state. Through fitting the observed data to the usual Boltzman statistics, we have been able to determine the separation of the ground quintet and excited triplet states. From this data, we have inferred the singlet-triplet gap in 1,3-cyclopentanediyl to be 900 cal/mol, in remarkable agreement with theoretical predictions of this number.

The ability to simulate EPR spectra has been crucial to the assignments made here. A powder EPR simulation package is described that uses the Zeeman and dipolar terms to calculate powder EPR spectra for triplet and quintet states.

Methods for characterizing paramagnetic samples by SQUID magnetometry have been developed, including robust routines for data fitting and analysis. A precursor to a potentially magnetic polymer was prepared by ring-opening metathesis polymerization (ROMP), and doped samples of this polymer were studied by magnetometry. While the present results are not positive, calculations have suggested modifications in this structure which should lead to the desired behavior.

Source listings for all computer programs are given in the appendix.

Seismic structure above and below the core-mantle boundary

Seismic structure above and below the core-mantle boundary (CMB) has been studied through use of travel time and waveform analyses of several different seismic wave groups. Anomalous systematic trends in observables document mantle heterogeneity on both large and small scales. Analog and digital data has been utilized, and in many cases the analog data has been optically scanned and digitized prior to analysis.

Differential travel times of S - SKS are shown to be an excellent diagnostic of anomalous lower mantle shear velocity (V s) structure. Wavepath geometries beneath the central Pacific exhibit large S- SKS travel time residuals (up to 10 sec), and are consistent with a large scale 0(1000 km) slower than average V_s region (≥3%). S - SKS times for paths traversing this region exhibit smaller scale patterns and trends 0(100 km) indicating V_s perturbations on many scale lengths. These times are compared to predictions of three tomographically derived aspherical models: MDLSH of Tanimoto [1990], model SH12_WM13 of Suet al. [1992], and model SH.10c.17 of Masters et al. [1992]. Qualitative agreement between the tomographic model predictions and observations is encouraging, varying from fair to good. However, inconsistencies are present and suggest anomalies in the lower mantle of scale length smaller than the present 2000+ km scale resolution of tomographic models. 2-D wave propagation experiments show the importance of inhomogeneous raypaths when considering lateral heterogeneities in the lowermost mantle.

A dataset of waveforms and differential travel times of S, ScS, and the arrival from the D" layer, Scd, provides evidence for a laterally varying V_s velocity discontinuity at the base of the mantle. Two different localized D" regions beneath the central Pacific have been investigated. Predictions from a model having a V_s discontinuity 180 km above the CMB agree well with observations for an eastern mid-Pacific CMB region. This thickness differs from V_s discontinuity thicknesses found in other regions, such as a localized region beneath the western Pacific, which average near 280 km. The "sharpness" of the V_s jump at the top of D", i.e., the depth range over which the V_s increase occurs, is not resolved by our data, and our data can in fact may be modeled equally well by a lower mantle with the increase in V_s at the top of D" occurring over a 100 krn depth range. It is difficult at present to correlate D" thicknesses from this study to overall lower mantle heterogeneity, due to uncertainties in the 3-D models, as well as poor coverage in maps of D" discontinuity thicknesses.

P-wave velocity structure (V_p) at the base of the mantle is explored using the seismic phases SKS and SPdKS. SPdKS is formed when SKS waves at distances around 107° are incident upon the CMB with a slowness that allows for coupling with diffracted P-waves at the base of the mantle. The P-wave diffraction occurs at both the SKS entrance and exit locations of the outer core. SP_dKS arrives slightly later in time than SKS, having a wave path through the mantle and core very close to SKS. The difference time between SKS and SP_dKS strongly depends on V_p at the base of the mantle near SK Score entrance and exit points. Observations from deep focus Fiji-Tonga events recorded by North American stations, and South American events recorded by European and Eurasian stations exhibit anomalously large SP_dKS - SKS difference times. SKS and the later arriving SP_dKS phase are separated by several seconds more than predictions made by 1-D reference models, such as the global average PREM [Dziewonski and Anderson, 1981] model. Models having a pronounced low-velocity zone (5%) in V_p in the bottom 50-100 km of the mantle predict the size of the observed SP_dK S-SKS anomalies. Raypath perturbations from lower mantle V_s structure may also be contributing to the observed anomalies.

Outer core structure is investigated using the family of SmKS (m=2,3,4) seismic waves. SmKS are waves that travel as S-waves in the mantle, P-waves in the core, and reflect (m-1) times on the underside of the CMB, and are well-suited for constraining outermost core V_p structure. This is due to closeness of the mantle paths and also the shallow depth range these waves travel in the outermost core. S3KS - S2KS and S4KS - S3KS differential travel times were measured using the cross-correlation method and compared to those from reflectivity synthetics created from core models of past studies. High quality recordings from a deep focus Java Sea event which sample the outer core beneath the northern Pacific, the Arctic, and northwestern North America (spanning 1/8th of the core's surface area), have SmKS wavepaths that traverse regions where lower mantle heterogeneity is pre- dieted small, and are well-modeled by the PREM core model, with possibly a small V_p decrease (1.5%) in the outermost 50 km of the core. Such a reduction implies chemical stratification in this 50 km zone, though this model feature is not uniquely resolved. Data having wave paths through areas of known D" heterogeneity (±2% and greater), such as the source-side of SmKS lower mantle paths from Fiji-Tonga to Eurasia and Africa, exhibit systematic SmKS differential time anomalies of up to several seconds. 2-D wave propagation experiments demonstrate how large scale lower mantle velocity perturbations can explain long wavelength behavior of such anomalous SmKS times. When improperly accounted for, lower mantle heterogeneity maps directly into core structure. Raypaths departing from homogeneity play an important role in producing SmKS anomalies. The existence of outermost core heterogeneity is difficult to resolve at present due to uncertainties in global lower mantle structure. Resolving a one-dimensional chemically stratified outermost core also remains difficult due to the same uncertainties. Restricting study to higher multiples of SmKS (m=2,3,4) can help reduce the affect of mantle heterogeneity due to the closeness of the mantle legs of the wavepaths. SmKS waves are ideal in providing additional information on the details of lower mantle heterogeneity.

2D modeling of lower mantle structure with WKM synthetics

The Earth is very heterogeneous, especially in the region close to the surface of the Earth, and in regions close to the core-mantle boundary (CMB). The lowermost mantle (bottom 300km of the mantle) is the place for fast anomaly (3% faster S velocity than PREM, modeled from Scd), for slow anomaly (-3% slower S velocity than PREM, modeled from S,ScS), for extreme anomalous structure (ultra-low velocity zone, 30% lower inS velocity, 10% lower in P velocity). Strong anomaly with larger dimension is also observed beneath Africa and Pacific, originally modeled from travel time of S, SKS and ScS. Given the heterogeneous nature of the earth, more accurate approach (than travel time) has to be applied to study the details of various anomalous structures, and matching waveform with synthetic seismograms has proven effective in constraining the velocity structures. However, it is difficult to make synthetic seismograms in more than 1D cases where no exact analytical solution is possible. Numerical methods like finite difference or finite elements are too time consuming in modeling body waveforms. We developed a 2D synthetic algorithm, which is extended from 1D generalized ray theory (GRT), to make synthetic seismograms efficiently (each seismogram per minutes). This 2D algorithm is related to WKB approximation, but is based on different principles, it is thus named to be WKM, i.e., WKB modified. WKM has been applied to study the variation of fast D" structure beneath the Caribbean sea, to study the plume beneath Africa. WKM is also applied to study PKP precursors which is a very important seismic phase in modeling lower mantle heterogeneity. By matching WKM synthetic seismograms with various data, we discovered and confirmed that (a) The D" beneath Caribbean varies laterally, and the variation is best revealed with Scd+Sab beyond 88 degree where Sed overruns Sab. (b) The low velocity structure beneath Africa is about 1500 km in height, at least 1000km in width, and features 3% reduced S velocity. The low velocity structure is a combination of a relatively thin, low velocity layer (200 km thick or less) beneath the Atlantic, then rising very sharply into mid mantle towards Africa. (c) At the edges of this huge Africa low velocity structures, ULVZs are found by modeling the large separation between S and ScS beyond 100 degree. The ULVZ to the eastern boundary was discovered with SKPdS data, and later is confirmed by PKP precursor data. This is the first time that ULVZ is verified with distinct seismic phase.

Modelagem hidrológica da bacia hidrográfica do rio Bengalas, Nova Friburgo, RJ, utilizando o potencial de geotecnologias na definição de áreas de risco de inundação.

A presente pesquisa concentra-se no estudo hidrológico utilizando o potencial das geotecnologias na modelagem do escoamento na bacia do rio Bengalas, cujo rio principal de mesmo nome, corta o município de Nova Friburgo, RJ, no sentido Sul-Norte. Esse município, um dos mais importantes da região serrana, sofre frequentemente com inundações e deslizamentos, onde, dados históricos e acontecimentos recentes mostram que a ocupação inadequada de encostas e calhas dos rios são as áreas destacada e negativamente afetadas. A metodologia tem suporte no uso de um SIG, extraindo informações, que por sua vez, serão entrada de dados na fase de modelagem, e reforçando a apresentação dos resultados das simulações através de mapas. Ela está divida basicamente em três etapas: "SIG", "Modelagem" e "Suporte à Tomada de Decisão/Simulação". Esse primeiro estudo permitiu compor um banco de dados geográfico com as características fisiográficas da bacia; a seleção criteriosa de uma modelagem matemática e encadeamento de seus parâmetros com os componentes do ciclo hidrológico; realizar a calibração do modelo de transformação chuva-vazão, Soil Conservation Service (CN); e simular a passagem dos volumes gerados pela precipitação efetiva na calha do rio Bengalas, com o objetivo de identificar e analisar as áreas suscetíveis a inundações na porção central da cidade de Nova Friburgo. Modelagem dessa natureza vem sendo empregada, principalmente, no gerenciamento de recursos hídricos, onde a tomada de decisões embasada nos resultados de simulações computacionais, contribuem para evitar prejuízos materiais e financeiros, e ainda, perdas de vidas humanas em áreas de risco, neste caso, aquelas suscetíveis a inundações. Analisando os resultados encontrados temos que a área suscetível à inundação para uma chuva com tempo de recorrência de 50 anos, o mais crítico estudado, seja de aproximadamente 1,0 km, distribuídos nos seus 8,5km na região central de Nova Friburgo-RJ, sendo está, ora delimitada, prioritariamente edificada.

Relação chuva-vazão nos telhados verdes modulares sob chuva simulada induzida.

A perda de vegetação natural e o aumento das superfícies impermeáveis decorrentes da expansão urbana têm mostrado que os tradicionais sistemas de drenagem urbana são insuficientes e pouco adaptáveis às alterações de uso do solo. Uma das consequências disso é o aumento da velocidade do escoamento superficial (runoff) que favorece as inundações, com enormes prejuízos materiais e ambientais. As inundações ocorrem geralmente quando ha ocorrência de chuvas de alta intensidade. O objetivo deste trabalho foi estudar a contribuição dos telhados verdes modulares submetidos a chuvas de alta intensidade, 155mm/h com duração de 7,0 minutos para retenção e retardo do escoamento superficial. Além disso, foram determinados valores para parâmetros de modelos clássicos chuva-vazão: Método Racional (C) e CN (SCS), que poderá, futuramente, servir de modelagem hidrológica dos impactos da adoção de telhados verdes no controle das enchentes urbanas. A metodologia adotada foi de natureza experimental e envolveu a construção de bancadas com inclinação regulável para suporte dos módulos experimentais e um sistema para indução de chuvas com intensidade controlada. Foram estudados três modelos de sistema modular para telhado verde que permitem o armazenamento de água no fundo da bandeja que compõe os módulos, sendo 2 de 17,0 L (M-17 e F-17) e 1 de 4,0 L (M-4), nas condições de solo seco e solo úmido. Em cada módulo vegetado foram utilizadas 3 espécies de vegetação: Portulaca oleracea (Onze horas), Callisia repens (Dinheiro em penca) e Apnia cordfolia (Rosinha do sol). Os resultados demonstraram que os volumes retidos, calculados a partir da observação do runoff, nas diferentes situações, foram coerentes entre si e com dados relatados na literatura. Os módulos vegetados produziram os melhores resultados com solo seco e os piores resultados com solo úmido. O percentual médio de retenção, considerando todos os tipos de módulos, foi de 58% do volume total de água induzida, com retardo médio de 12 minutos no runoff. Os valores médios de C (Método Racional) foram 0,4, 0,48, 0,36, para os módulos M-17, M-4 e F-17, respectivamente e os de CN (SCS) foram 93, 95, 93, para os mesmos módulos. Conforme esperado, os maiores valores de CN foram para solos úmidos, mantendo a relação que quanto menor o volume retido, maior o runoff e o CN. O módulo F-17 foi o que apresentou melhor desempenho em todos os aspectos (redução do escoamento, retenção hídrica e retardo do runoff). Este estudo demonstra a boa contribuição que esse tipo de sistema pode proporcionar na retenção e retardo do escoamento superficial, mesmo para chuvas intensas de curta duração, principalmente após período de curta estiagem, situação comum em locais de clima tropical. Futuros estudos deverão avaliar o desempenho dos sistemas modulares de telhados verdes com outras características e intensidades de chuvas. A adoção de telhados verdes deve ser cautelosa, sobretudo pela carga extra que esse tipo de sistema representa.

Structural features of geostrophic circulation in open region of the South China Sea

On the basis of observation data of water temperature and salinity the mean seasonal geostrophic circulation in open region of the South China Sea (SCS) was computed by the dynamic method relative to the 800 decibar reference surface. The results of computation let go to following notices: In both main monsoons (winter and summer) there are two main geostrophic eddies: the anticlockwise eddy in the northern and northwestern part, and the clockwise eddy in the southern part of the SCS with corresponding divergent and convergent zones. The main frontal zones go along the middle latitudes of the sea from the southern continental shelf of Vietnam to the area west of Luzon Island. The strength and stability of the current in winter are higher than in summer. The Kuroshio has an enough strong branch intruding into the SCS through Bashi Strait in winter creating in the sea the water structure similar to that of the Northwest Pacific subtropical and tropical regions. In summer the Kuroshio water can intrude directly only into the area southwest of Taiwan.

Chemical surface modification of poly-ε-caprolactone improves Schwann cell proliferation for peripheral nerve repair.

Poly-ε-caprolactone (PCL) is a biodegradable and biocompatible polymer used in tissue engineering for various clinical applications. Schwann cells (SCs) play an important role in nerve regeneration and repair. SCs attach and proliferate on PCL films but cellular responses are weak due to the hydrophobicity and neutrality of PCL. In this study, PCL films were hydrolysed and aminolysed to modify the surface with different functional groups and improve hydrophilicity. Hydrolysed films showed a significant increase in hydrophilicity while maintaining surface topography. A significant decrease in mechanical properties was also observed in the case of aminolysis. In vitro tests with Schwann cells (SCs) were performed to assess film biocompatibility. A short-time experiment showed improved cell attachment on modified films, in particular when amino groups were present on the material surface. Cell proliferation significantly increased when both treatments were performed, indicating that surface treatments are necessary for SC response. It was also demonstrated that cell morphology was influenced by physico-chemical surface properties. PCL can be used to make artificial conduits and chemical modification of the inner lumen improves biocompatibility.

Geomagnetic paleointensity dating of South China Sea sediments for the last 130 kyr

Relative paleointensity records from the northern South China Sea, northwest Pacific Ocean were studied in two gravity piston cores. Continuous mineral magnetic and paleomagnetic measurements were made using discrete sediment samples. Detailed rock magnetic parameters, such as thermomagnetic and high-field hysteresis data, indicate that pseudo-single domain magnetite in a narrow range of grain-size and concentration is the main contributor to the remanent magnetization. The uniform magnetic mineralogy meets the commonly accepted criteria for establishing relative paleointensity records. The relative paleointensity (RPI) curves were constructed by normalizing the natural remanent magnetization (NRM) with isothermal remanent magnetization (IRM), both in the 20-60 mT demagnetization state. Dating constraints have been provided by radiocarbon ages in the upper 400 cm of both cores. Furthermore, we have correlated our paleointensity records with NAPIS-75, S.Atlantic-1089, Sint-200 and NOPAPIS-250 to determine the chronological RPI framework for the South China Sea (SCS-PIS). Although some temporal offsets of paleointensity features between the different records have been recognized, their similar shape suggests that relative paleointensity on the 10(3)-10(4) year scale is globally coherent and can provide an age framework for sediments independent of delta O-18 ages.

径流曲线法在黄土区小流域地表径流预测中的初步应用

径流曲线法是目前国际上预测无径流观测资料地区降水地表产流的主要模型,由于气候、水文及下垫面的差异,在黄土高原地区的应用受到限制。利用黄土高原地区3个小流域的303场降雨径流资料,针对黄土高原降雨地表径流特点优化模型中的初损率λ,并提出降雨强度修正函数,将降雨强度因子引入径流曲线法。优化后的模型效率E达到0.812,实测径流深与预测径流深的线性回归决定系数R2达到0.822。改进后的SCS-CN模型可用于黄土区小流域降雨地表产流预报,对黄土高原无资料地区侵蚀产流预报、指导水土保持工程配置和设计具有重要的理论和工程实践意义。

EV共聚物序列中的两种结构因素

系统描述了ＥＶ共聚物序列中两种结构因素对共聚物主链中亚甲基和次甲基１３ＣＮＭＲ化学位移的贡献，将ＳＣＳ方法与半经验方法结合起来，阐明了常数项δＬＥ和δ０的物理意义，提出了以聚乙烯链反式构象化学位移δｔ为基准计算上述亚甲基和次甲基化学位移的公式：δｃ＝δｔ＋ΣｎｉＳｉ＋ΣＰｊγｊ并在此基础上，讨论了聚乙烯，聚丙烯的特殊情况和乙丙共聚物的链结构.

15个乙烯-乙烯基化合物共聚物的取代基参数

本文应用取代基参数(SCS)方法处了15个EV共聚物的~(12)C NMR谱.它们是:(1)乙烯-α-烯烃共聚物,即乙烯-丙烯共聚物.乙烯-丁烯-1共聚物,乙烯-4-甲基-1-戊烯共聚物,乙烯-己烯-1共聚物和乙烯-辛烯-1共聚物;(2)乙烯-含氧乙烯基共聚物,即乙烯-甲基丙烯酸N,N-二甲基胺乙酯共聚物,乙烯-丙烯酸甲酯共聚物.乙烯-丙烯酸共聚物,乙烯-乙酸乙烯酯,乙烯-乙烯醇,乙烯-氧化碳共聚物(ECO)(?)乙烯-卤代乙烯共聚物及其它EV共聚物,即乙烯-氯化乙烯共聚物(包含氯化聚乙烯),乙烯-溴化乙烯共聚物,乙烯-苯乙烯共聚物(包含氢化丁二烯-苯乙烯共聚物)和乙烯-丙烯腈共聚物、得到了15种取代基的SCS参数.

SEQUENCE STRUCTURE OF ETHYLENE-VINYL SUBSTITUTED COPOLYMER WITH C-13 NMR .4.

The substituent chemical shift (SCS) has been applied to the assignment of the C-13 NMR spectrum of chlorinated polyethylene (CPE). CPE of different chlorine contents has been employed and their sequence structure discussed. The results show that characteristic of CPE with medium chlorine content is the dichloroethane structure in molecular chain. SCS parameters have been obtained from the C-13 NMR spectra. It was found that the effects of chlorine content and temperature on SCS are negligible, but the substituent parameter S1 reduced by 0.39 ppm when C2Cl4 was added to solvent ODCB.

含氧类乙烯基共聚褥的序列结构

共聚物的序列结构与其性能密切相关.近年来,乙烯基共聚物序列结构的研究在观念与方法上取得了较大的突破.如取代基效应(SCS)方法对乙烯基共聚物的应用,半经验的旋转异构态(RIS)理论由均聚物到共聚物的扩展及非经验的量子化学方法的尝试.

取代基效应与乙烯-α-烯烃共聚物的序列结构——5.乙烯-乙烯醇共聚物

本文应用取代基效应(SCS)方法研究了乙烯-乙烯醇(EVA)共聚物,得到了羟基(-OH)在两种不同溶剂中的SCS参数:在苯酚+重水(80/20W/W)中参数为S_1=42.77±0.08ppm,S_2=7.155±0.06ppm,S_3(s)=-4.08±0.02ppm,S_3(t)=-3.09±0.02ppm,S_4=0.48±0.03ppm,S_5=0.26±0.05ppm,在以邻二氯苯为溶剂时参数为S_1=44.97±0.61ppm,S_2=7.40±0.00ppm,S_3(s)=-4.51±0.17ppm,S_3(t)=-3.13±0.00ppm,S_4=0.63±0.04ppm,S_5=0.36±0.00ppm,同时利用所得到的SCS参数对该共聚物的~(13)C NMR谱进行了归属。