939 resultados para Rubber based units
Resumo:
This paper presents four teaching curriculum units for primary level students based on Simple and Complex TAGS (Teacher Assessment of Grammatical Structures), teaching vocabulary and language structure.
Resumo:
Thermally stable elastomeric composites based on ethylene-propylene-diene monomer (EPDM) and conducting polymer-modified carbon black (CPMCB) additives were produced by casting and crosslinked by compression molding. CPMCB represent a novel thermally stable conductive compound made via ""in situ"" deposition of intrinsically conducting polymers (ICP) such as polyaniline or polypyrrole on carbon black particles. Thermogravimetric analysis showed that the composites are thermally stable with no appreciable degradation at ca. 300 degrees C. Incorporating CPMCB has been found to be advantageous to the processing of composites, as the presence of ICP lead to a better distribution of the filler within the rubber matrix, as confirmed by morphological analysis. These materials have a percolation threshold range of 5-10 phr depending on the formulation and electrical dc conductivity values in the range of 1 x 10(-3) to 1 x 10(-2) S cm(-1) above the percolation threshold. A less pronounced reinforcing effect was observed in composites produced with ICP-modified additives in relation to those produced only with carbon black. The results obtained in this study show the feasibility of this method for producing stable, electrically conducting composites with elastomeric characteristics. POLYM. COMPOS., 30:897-906, 2009. (C) 2008 Society of Plastics Engineers
Resumo:
There is recognition that the first-year of university study is a critical phase in the preparation, motivation and retention of science, mathematics, engineering and technology (SMET) students. First-year provides the foundation/generic skills upon which students will base their undergraduate studies and professional practice; first-year is where many poorly prepared/at risk students will drop out and contribute to the poor student retention rate observed in the SMET disciplines; and first-year is when students may lose the motivation to pursue their chosen career direction if they find the studies at the commencement of their undergraduate program appear to bear no relationship to their intended career. In 2003, the Learning Resources Advisory Group of the Deakin University School of Engineering and Technology was requested to undertake a review of first-year units in the School’s programs. The information contained in anonymous unit evaluation questionnaires from the years 2000-2002 was used as the basis for analysing student perceptions of first-year units. In unit evaluations, students reported a wide range of issues that impacted negatively on their perception of the content and conduct of first-year units. It was noted that units service taught by other Schools form a significant element of the first-year of all of the Engineering and Technology undergraduate programs – typically 25 to 50 percent of the content. The significant influence of these units on the perceptions of the first-year of the School’s commencing students means that the School should exercise some control over the content and delivery of these units.
Resumo:
There are many proposals for managing biodiversity by using surrogates, such as umbrella, indicator, focal, and flagship species. We use the term biodiversity management unit for any ecosystem-based classificatory scheme for managing biodiversity. The sufficiency of biodiversity management unit classification schemes depends upon (1) whether different biotic elements (e.g., trees, birds, reptiles) distinguish between biodiversity management units within a classification (i.e., coherence within classes}; and (2) whether different biotic elements agree upon similarities and dissimilarities among biodiversity management unit classes (i.e., conformance among classes). Recent evaluations suggest that biodiversity surrogates based on few or single taxa are not useful. Ecological vegetation classes are an ecosystem-based classification scheme used as one component for biodiversity management in Victoria, Australia. Here we evaluated the potential for ecological vegetation classes to be used as biodiversity management units in the box-ironbark ecosystem of central Victoria, Australia. Eighty sites distributed among 14 ecological vegetation classes were surveyed in the same ways for tree species, birds, mammals, reptiles, terrestrial invertebrates, and nocturnal flying insects. Habitat structure and geographic separations also were measured, which, with the biotic elements, are collectively referred to as variables. Less than half of the biotic element-ecological vegetation class pairings were coherent. Generalized Mantel tests were used to examine conformance among variables with respect to ecological vegetation classes. While most tests were not significant, birds, mammals, tree species, and habitat structure together showed significant agreement on the rating of similarities among ecological vegetation classes. In this system, use of ecological vegetation classes as biodiversity management units may account reasonably well for birds, mammals, and trees; but reptiles and invertebrates would not be accommodated. We conclude that surrogates will usually have to be augmented or developed as hierarchies to provide general representativeness.
Resumo:
We found an interesting relation between convex optimization and sorting problem. We present a parallel algorithm to compute multiple order statistics of the data by minimizing a number of related convex functions. The computed order statistics serve as splitters that group the data into buckets suitable for parallel bitonic sorting. This led us to a parallel bucket sort algorithm, which we implemented for many-core architecture of graphics processing units (GPUs). The proposed sorting method is competitive to the state-of-the-art GPU sorting algorithms and is superior to most of them for long sorting keys.
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
Nanocomposites were prepared from mixture of different concentrations of ferroelectric nanoparticles in an elastomeric matrix based on the vulcanized natural rubber. The morphological characterization of nanocomposites was carried out using Scanning electron microscopy (SEM), Transmission electron microscopy (TEM) and Atomic force microscopy (AFM). The nanocrystalline ferroelectric oxide is potassium strontium niobate (KSN) with stoichiometry KSr2Nb5O15, and was synthesized by the chemical route using a modified polyol method, obtaining particle size and microstrain equal to 20 nm and 0.32, respectively. These ferroelectric nanoparticles were added into the natural rubber in concentrations equal to 1, 3, 5, 10, 20 and 50 phr (parts per hundred of rubber) forming ferroelectric nanocomposites (NR/KSN). Using morphological characterization, we identified the maximum value of surface roughness at low concentrations, in particular, sample with 3 phr of nanoparticles and factors such as encapsulation and uniformity in the distribution of nanoparticles into the natural rubber matrix are investigated and discussed.
Resumo:
Background: Breast cancer is the most frequently diagnosed cancer and the leading cause of cancer deaths among women worldwide. The use of mobile mammography units to offer screening to women living in remote areas is a rational strategy to increase the number of women examined. This study aimed to evaluate results from the first 2 years of a government-organized mammography screening program implemented with a mobile unit (MU) and a fixed unit (FU) in a rural county in Brazil. The program offered breast cancer screening to women living in Barretos and the surrounding area. Methods: Based on epidemiologic data, 54 238 women, aged 40 to 69 years, were eligible for breast cancer screening. The study included women examined from April 1, 2003 to March 31, 2005. The chi-square test and Bonferroni correction analyses were used to evaluate the frequencies of tumors and the importance of clinical parameters and tumor characteristics. Significance was set at p < 0.05. Results: Overall, 17 964 women underwent mammography. This represented 33.1% of eligible women in the area. A mean of 18.6 and 26.3 women per day were examined in the FU and MU, respectively. Seventy six patients were diagnosed with breast cancer (41 (54%) in the MU). This represented 4.2 cases of breast cancer per 1000 examinations. The number of cancers detected was significantly higher in women aged 60 to 69 years than in those aged 50 to 59 years (p < 0.001) or 40 to 49 years (p < 0.001). No difference was observed between women aged 40 to 49 years and those aged 50 to 59 years (p = 0.164). The proportion of tumors in the early (EC 0 and EC I) and advanced (CS III and CS IV) stages of development were 43.4% and 15.8%, respectively. Conclusions: Preliminary results indicate that this mammography screening program is feasible for implementation in a rural Brazilian territory and favor program continuation.
Resumo:
A new series of donor acceptor copolymers were synthesized via the Witting route and applied as an active layer in organic thin-films solar cells. These copolymers are composed of fluorene thiophene and phenylene thiophene units. The ratio between those was systematically varied, and copolymers containing 0%, 50%, and 75% of phenylene thiophene were characterized and evaluated when used in photovoltaic devices. The copolymers' composition, photophysical, electrical, and morphological properties are addressed and correlated with device performance. The 50% copolymer ratio was found to be the best copolymer of the series, yielding a power conversion efficiency (PCE) under air mass (AM) 1.5 conditions of 2.4% in the bilayer heterojunction with the C-60 molecule. Aiming at flexible electronics applications, solutions based on the heterojunction of this copolymer with PCBM (6,6-phenyl-C-61-butyric acid methyl ester) were also successfully deposited using an inkjet printing method and used as an active layer in solar cells.
Resumo:
The aim of this survey was to investigate clinicians' current approach to the haemodynamic management and resuscitation endpoints in septic shock.
Resumo:
This paper presents an approach to create what we have called a Unified Sentiment Lexicon (USL). This approach aims at aligning, unifying, and expanding the set of sentiment lexicons which are available on the web in order to increase their robustness of coverage. One problem related to the task of the automatic unification of different scores of sentiment lexicons is that there are multiple lexical entries for which the classification of positive, negative, or neutral {P, Z, N} depends on the unit of measurement used in the annotation methodology of the source sentiment lexicon. Our USL approach computes the unified strength of polarity of each lexical entry based on the Pearson correlation coefficient which measures how correlated lexical entries are with a value between 1 and -1, where 1 indicates that the lexical entries are perfectly correlated, 0 indicates no correlation, and -1 means they are perfectly inversely correlated and so is the UnifiedMetrics procedure for CPU and GPU, respectively. Another problem is the high processing time required for computing all the lexical entries in the unification task. Thus, the USL approach computes a subset of lexical entries in each of the 1344 GPU cores and uses parallel processing in order to unify 155802 lexical entries. The results of the analysis conducted using the USL approach show that the USL has 95.430 lexical entries, out of which there are 35.201 considered to be positive, 22.029 negative, and 38.200 neutral. Finally, the runtime was 10 minutes for 95.430 lexical entries; this allows a reduction of the time computing for the UnifiedMetrics by 3 times.
Resumo:
Recent research works have concluded that corn cob may have interesting material properties, in particular, lightness, and thermal and sound insulation abilities. In this research work, corn cob is proposed as an alternative sustainable aggregate for lightweight concrete masonry unit (CMU) manufacturing. The corn cob requires to be granulated previously in order to obtain adequate particle size grade. Subsequently, the particles are wrapped in a cement paste with the purpose of reducing their water abortion and adherent capacities. CMU are current applied in the building of partition walls. The main goal of this research work consists on studying the fire behaviour of partition walls built with CMU of processed corn cob granulate (CMU-PCC).