From the cathedral to the classroom : the emergence of new discourses on religious education

In 2009, Religious Education is a designated key learning area in Catholic schools in the Archdiocese of Brisbane and, indeed, across Australia. Over the years, though, different conceptualisations of the nature and purpose of religious education have led to the construction of different approaches to the classroom teaching of religion. By investigating the development of religious education policy in the Archdiocese of Brisbane from 1984 to 2003, the study seeks to trace the emergence of new discourses on religious education. The study understands religious education to refer to a lifelong process that occurs through a variety of forms (Moran, 1989). In Catholic schools, it refers both to co-curricula activities, such as retreats and school liturgies, and the classroom teaching of religion. It is the policy framework for the classroom teaching of religion that this study explores. The research was undertaken using a policy case study approach to gain a detailed understanding of how new conceptualisations of religious education emerged at a particular site of policy production, in this case, the Archdiocese of Brisbane. The study draws upon Yeatman’s (1998) description of policy as occurring “when social actors think about what they are doing and why in relation to different and alternative possible futures” (p. 19) and views policy as consisting of more than texts themselves. Policy texts result from struggles over meaning (Taylor, 2004) in which specific discourses are mobilised to support particular views. The study has a particular interest in the analysis of Brisbane religious education policy texts, the discursive practices that surrounded them, and the contexts in which they arose. Policy texts are conceptualised in the study as representing “temporary settlements” (Gale, 1999). Such settlements are asymmetrical, temporary and dependent on context: asymmetrical in that dominant actors are favoured; temporary because dominant actors are always under challenge by other actors in the policy arena; and context - dependent because new situations require new settlements. To investigate the official policy documents, the study used Critical Discourse Analysis (hereafter referred to as CDA) as a research tool that affords the opportunity for researchers to map and chart the emergence of new discourses within the policy arena. As developed by Fairclough (2001), CDA is a three-dimensional application of critical analysis to language. In the Brisbane religious education arena, policy texts formed a genre chain (Fairclough, 2004; Taylor, 2004) which was a focus of the study. There are two features of texts that form genre chains: texts are systematically linked to one another; and, systematic relations of recontextualisation exist between the texts. Fairclough’s (2005) concepts of “imaginary space” and “frameworks for action” (p. 65) within the policy arena were applied to the Brisbane policy arena to investigate the relationship between policy statements and subsequent guidelines documents. Five key findings emerged from the study. First, application of CDA to policy documents revealed that a fundamental reconceptualisation of the nature and purpose of classroom religious education in Catholic schools occurred in the Brisbane policy arena over the last twenty-five years. Second, a disjuncture existed between catechetical discourses that continued to shape religious education policy statements, and educational discourses that increasingly shaped guidelines documents. Third, recontextualisation between policy documents was evident and dependent on the particular context in which religious education occurred. Fourth, at subsequent links in the chain, actors created their own “imaginary space”, thereby altering orders of discourse within the policy arena, with different actors being either foregrounded or marginalised. Fifth, intertextuality was more evident in the later links in the genre chain (i.e. 1994 policy statement and 1997 guidelines document) than in earlier documents. On the basis of the findings of the study, six recommendations are made. First, the institutional Church should carefully consider the contribution that the Catholic school can make to the overall pastoral mission of the diocese in twenty-first century Australia. Second, policymakers should articulate a nuanced understanding of the relationship between catechesis and education with regard to the religion classroom. Third, there should be greater awareness of the connections among policies relating to Catholic schools – especially the connection between enrolment policy and religious education policy. Fourth, there should be greater consistency between policy documents. Fifth, policy documents should be helpful for those to whom they are directed (i.e. Catholic schools, teachers). Sixth, “imaginary space” (Fairclough, 2005) in policy documents needs to be constructed in a way that allows for multiple “frameworks for action” (Fairclough, 2005) through recontextualisation. The findings of this study are significant in a number of ways. For religious educators, the study highlights the need to develop a shared understanding of the nature and purpose of classroom religious education. It argues that this understanding must take into account the multifaith nature of Australian society and the changing social composition of Catholic schools themselves. Greater recognition should be given to the contribution that religious studies courses such as Study of Religion make to the overall religious development of a person. In view of the social composition of Catholic schools, there is also an issue of ecclesiological significance concerning the conceptualisation of the relationship between the institutional Catholic Church and Catholic schools. Finally, the study is of significance because of its application of CDA to religious education policy documents. Use of CDA reveals the foregrounding, marginalising, or excluding of various actors in the policy arena.

A numerical method to quantify differential axial shortening in concrete buildings

Differential distortion comprising axial shortening and consequent rotation in concrete buildings is caused by the time dependent effects of “shrinkage”, “creep” and “elastic” deformation. Reinforcement content, variable concrete modulus, volume to surface area ratio of elements and environmental conditions influence these distortions and their detrimental effects escalate with increasing height and geometric complexity of structure and non vertical load paths. Differential distortion has a significant impact on building envelopes, building services, secondary systems and the life time serviceability and performance of a building. Existing methods for quantifying these effects are unable to capture the complexity of such time dependent effects. This paper develops a numerical procedure that can accurately quantify the differential axial shortening that contributes significantly to total distortion in concrete buildings by taking into consideration (i) construction sequence and (ii) time varying values of Young’s Modulus of reinforced concrete and creep and shrinkage. Finite element techniques are used with time history analysis to simulate the response to staged construction. This procedure is discussed herein and illustrated through an example.

The design and testing of a daylighting device : optimising the energy and optical performance of Australian commercial buildings

The effective daylighting of multistorey commercial building interiors poses an interesting problem for designers in Australia’s tropical and subtropical context. Given that a building exterior receives adequate sun and skylight as dictated by location-specific factors such as weather, siting and external obstructions; then the availability of daylight throughout its interior is dependant on certain building characteristics: the distance from a window façade (room depth), ceiling or window head height, window size and the visible transmittance of daylighting apertures. The daylighting of general stock, multistorey commercial buildings is made difficult by their design limitations with respect to some of these characteristics. The admission of daylight to these interiors is usually exclusively by vertical windows. Using conventional glazing, such windows can only admit sun and skylight to a depth of approximately 2 times the window height. This penetration depth is typically much less than the depth of the office interiors, so that core areas of these buildings receive little or no daylight. This issue is particularly relevant where deep, open plan office layouts prevail. The resulting interior daylight pattern is a relatively narrow perimeter zone bathed in (sometimes too intense) light, contrasted with a poorly daylit core zone. The broad luminance range this may present to a building occupant’s visual field can be a source of discomfort glare. Furthermore, the need in most tropical and subtropical regions to restrict solar heat gains to building interiors for much of the year has resulted in the widespread use of heavily tinted or reflective glazing on commercial building façades. This strategy reduces the amount of solar radiation admitted to the interior, thereby decreasing daylight levels proportionately throughout. However this technique does little to improve the way light is distributed throughout the office space. Where clear skies dominate weather conditions, at different times of day or year direct sunlight may pass unobstructed through vertical windows causing disability or discomfort glare for building occupants and as such, its admission to an interior must be appropriately controlled. Any daylighting system to be applied to multistorey commercial buildings must consider these design obstacles, and attempt to improve the distribution of daylight throughout these deep, sidelit office spaces without causing glare conditions. The research described in this thesis delineates first the design optimisation and then the actual prototyping and manufacture process of a daylighting device to be applied to such multistorey buildings in tropical and subtropical environments.

Shifting interpretations of interiors and buildings: the impact of colour

The ability of a designer – for example, interior designer, architect, landscape architect, etc. – to design for a particular target group (user and/or clients) is potentially enhanced through more targeted studies relating colour in situ. The study outlined in this paper involved participant responses to five achromatic scenes of different built environments prior to viewing the same scenes in colour. Importantly, in this study the participants, who were young designers, came to realise that colour potentially holds the power to impact on the identity of an architectural form, an interior space and/or particular elements such as doorways, furniture settings, etc., as well as influence atmosphere. Prior to discussing the study, a selection of other research, which links colour to meaning and emotions, introduces how people understand and/or feel in relation to colour. For example, yellow is said to be connected to happiness; or red evokes feelings of anger. Secondly, the need for spatial designers to understand colour in context is raised. An overview of the study is then provided. It was found that the impact of colour includes a shift in perception of aspects such as its atmosphere and youthfulness. Through studio/class discussions it was also noted the predicted age of the place, the function, and in association, the potential users when colour was added (or deleted) were often challenged.

Use of lifts and refuge floors for fire evacuation in high rise apartment buildings

If current population and accommodation trends continue, Australian cities will, in the future, have noticeable numbers of apartment buildings over 60 storeys high. With an aging population it follows that a significant proportion of those occupying these buildings will be senior citizens, many of whom will have some form of disability. For these occupants a fire emergency in a high rise building presents a serious problem. Currently lifts cannot be used for evacuation and going down 60 storeys in a fire isolated staircase would be physically impossible for many. Therefore, for many, the temptation to remain in one’s unit will be very strong. With an awareness of this behaviour trend in older residents, many researchers have, in recent years, explored the possible wider use of lifts in a fire emergency. So far the use of lifts for evacuation has been approved for a small number of buildings but wide acceptance of this solution is still to be achieved. This paper concludes that even in high-rise apartment buildings where lifts are approved for evacuation, architects should design the building with alternative evacuation routes and provide suitable safe refuge areas for those who cannot use the stairs when the lifts are unavailable.