Cork industry wastewater partition by ultra/nanofiltration: A biodegradation and valorisation study

Wastewater from cork processing industry present high levels of organic and phenolic compounds, such as tannins, with a low biodegradability and a significant toxicity. These compounds are not readily removed by conventional municipal wastewater treatment, which is largely based on primary sedimentation followed by biological treatment. The purpose of this work is to study the biodegradability of different cork wastewater fractions, obtained through membrane separation, in order to assess its potential for biological treatment and having in view its valorisation through tannins recovery, which could be applied in other industries. Various ultrafiltration and nanofiltration membranes where used, with molecular weight cut-offs (MWCO) ranging from 0.125 to 91 kDa. The wastewater and the different permeated fractions were analyzed in terms of Total Organic Carbon (TOC), Chemical Oxygen Demand (COD), Biochemical Oxygen Demand (BOD), Total Phenols (TP), Tannins, Color, pH and Conductivity. Results for the wastewater shown that it is characterized by a high organic content (670.5-1056.8 mg TOC/L, 2285-2604 mg COD/L, 1000-1225 mg BOD/L), a relatively low biodegradability (0.35-0.38 for BODs/COD and 0.44-0.47 for BOD20/COD) and a high content of phenols (360-410 mg tannic acid/L) and tannins (250-270 mg tannic acid/L). The results for the wastewater fractions shown a general decrease on the pollutant content of permeates, and an increase of its biodegradability, with the decrease of the membrane MWCO applied. Particularly, the permeated fraction from the membrane MWCO of 3.8 kDa, presented a favourable index of biodegradability (0.8) and a minimized phenols toxicity that enables it to undergo a biological treatment and so, to be treated in a municipal wastewater treatment plant. Also, within the perspective of valorisation, the rejected fraction obtained through this membrane MWCO may have a significant potential for tannins recovery. Permeated fractions from membranes with MWCO lower than 3.8 kDa, presented a particularly significant decline of organic matter and phenols, enabling this permeates to be reused in the cork processing and so, representing an interesting perspective of zero discharge for the cork industry, with evident environmental and economic advantages. (C) 2010 Elsevier Ltd. All rights reserved.

Goldra: premier gisement karstique en Algarve, faune et industries

A bone breccia from Goldra, near Loulé, is studied. It corresponds to the infilling of a karst depression, consisting of: rather worn and probably transported dolomite pebbles at the bottom; accumulations of frequently burnt bone scraps, much broken and with acute edges (no transport), certainly debris of human food, suggesting habitat level (s); in association with the former, stone (flint, quartz, quartzite, graywacke) rather uncharacteristic artifacts that seem compatible with middle and upper Paleolithic, or with Epipaleolithic; and small mammal teeth and bones. Fauna includes an extinct species, Microtus brecciensis recognized for the first time in Portugal. It is not older than Riss-Wiirm interglacial, and may be of this age or later, maybe that of one of wurm's first interstades. Fauna points out to a varied landscape with open country and woods; and to a rather warm and dry temperate, or dry subtropical mediterranean climate. Climate differences should not be significant in comparison with the extant situation. The presence of the mammal species found so far is consistent with modern distribution.

Managerial strategies in canning industries: A case study of early twentieth century Portugal

Business History, Vol, 51 Issue 1, p45-58

Multilevel model of safety climate for furniture industries

BACKGROUND: Furniture companies can analyze their safety status using quantitative measures. However, the data needed are not always available and the number of accidents is under-reported. Safety climate scales may be an alternative. However, there are no validated Portuguese scales that account for the specific attributes of the furniture sector. OBJECTIVE: The current study aims to develop and validate an instrument that uses a multilevel structure to measure the safety climate of the Portuguese furniture industry. METHODS: The Safety Climate in Wood Industries (SCWI) model was developed and applied to the safety climate analysis using three different scales: organizational, group and individual. A multilevel exploratory factor analysis was performed to analyze the factorial structure. The studied companies’ safety conditions were also analyzed. RESULTS: Different factorial structures were found between and within levels. In general, the results show the presence of a group-level safety climate. The scores of safety climates are directly and positively related to companies’ safety conditions; the organizational scale is the one that best reflects the actual safety conditions. CONCLUSIONS: The SCWI instrument allows for the identification of different safety climates in groups that comprise the same furniture company and it seems to reflect those groups’ safety conditions. The study also demonstrates the need for a multilevel analysis of the studied instrument.

Shoprite Holdings Ltd: Equity research

A Work Project, presented as part of the requirements for the Award of a Masters Degree in Finance from the NOVA – School of Business and Economics

Cash conversion cycle across industries

A Work Project, presented as part of the requirements for the Award of a Masters Degree in Management from the NOVA – School of Business and Economics

The internationalization process of born global firms in high-tech and low-tech industries: Is there any difference?

A Work Project, presented as part of the requirements for the Award of a Masters Degree in Management from the NOVA – School of Business and Economics

Performance analysis of an SRI screen based on employment quality in high and low capital industries: International evidence

A Work Project, presented as part of the requirements for the Award of a Masters Degree in Finance from the NOVA – School of Business and Economics and Maastricht University School of Business and Economics

Evaluating the potential of yeast strains to produce added value products for the food and/or pharmaceutical industries

This study focus in the valorization of the apple pomace with the main goal of obtaining added value products. For that, hot compressed water technology was used for the extraction of phenolic compounds and hydrolysis of polysaccharides presents in the lignocellulosic structure of apple pomace to obtain simple sugars. The sugars have been utilized as alternative carbon source for growth, lipid accumulation and carotenoids production by five different yeast Yarrowia lipolytica, Rhodotorula mucilaginosa, Rhodotorula glutinis, Rhodosporidium babjevae and Rhodosporidium toruloides. Hydrolysis experiments were carried out with constant pressure of 100 bar, flow rate of 2mL/min and temperatures between 50°C and 250°C. The amount of total sugars present in apple pomace hydrolysates showed maximum values for the hydrolysis temperatures of 110°C and 190°C. In fact, these temperatures revealed the best results regarding the monosaccharides quantities. The amount of 5-HMF and furfural in each hydrolysate varied through the different temperatures. Maximum values for 5-HMF were obtained with 170°C, while furfural showed to be maximum at 210°C. Extraction of phenolic compounds were performed in simultaneously with hydrolysis reactions. Total phenolic compounds (TPC) increased along the temperature, however with small variations between 170°C and 250°C. Hydrolysates were then used as alternative carbon source to yeast growth. R. mucilaginosa shows the highest optical density, with the hydrolysate obtained at 130°C. Carotenoids produced by these yeast scored a total of 7.02μg carotenoids/g cell dry weight, while for the control assay, the same yeast scored 9.31μg caratonoides/g cell dry weight. β-carotene was quantified by HPLC, were 33% of the carotenoid production by R. mucilaginosa with hydrolysate as carbon source, corresponded to β-caroteno.

Internationalization strategy of reliance to Brazil

This Work Project was focused, firstly, in an internal analysis to assess the possible competitive advantage sources of the firm and to identify the key weakness that the firm should improve before advancing with the internationalization strategy. Completed the analysis was possible to verify that the source of sustainable competitive advantage of Relance is the use of specific raw materials and that its biggest weaknesses are the lack of capacity and the excessive dependence on key employees. Overall, it was possible to conclude that the firm is in position of competing in the international markets. Secondly, due to its crucial importance, the country selection was made with a deep objective analysis, resulting with the selection of Brazil as the country with the highest market potential. Regarding the strategy to actually enter in Brazil’s market, after the study of 12 modes of entry it was possible to conclude that there is no ideal mode. However, the study performed allowed to undertake the conclusion that in order to obtain long-term optimization on the process, the adaptation, to the firm´s situation, of the Uppsala model progressive stages is the ideal. At the course of this Work Project it was inferred that the critical success factors are the choice of the distributor and the promotion of Relance as a premium brand.

Primera Reservoir Ltd. strategic position analysis

The purpose of this work is to understand the internal and external structure in which the company operates to provide an idea of the strategic actions needed to accomplish their organizational objectives. A strategic software was employed to build up phase one and phase two, phase one involved analysing internal and external factors that influence the company, comprehending their core competences, factors that influence the market and identification of strengths and weaknesses. Phase two consisted on providing an idea of their real competitive position and the suggestion of a development strategy, given the possible limitations in the external factors, the company should carefully analyse some of the opportunities present in the industry overseas to continue to develop their business and increase its profitability. Furthermore, a source of competitive advantage was found in their outbound logistics which could serve a differentiator between their competitors.

East African Breweries LTD Alcoholic beverages industry

Equity research report

Multilevel model of safety climate for furniture industries

BACKGROUND: Furniture companies can analyze their safety status using quantitative measures. However, the data needed are not always available and the number of accidents is under-reported. Safety climate scales may be an alternative. However, there are no validated Portuguese scales that account for the specific attributes of the furniture sector. OBJECTIVE: The current study aims to develop and validate an instrument that uses a multilevel structure to measure the safety climate of the Portuguese furniture industry. METHODS: The Safety Climate in Wood Industries (SCWI) model was developed and applied to the safety climate analysis using three different scales: organizational, group and individual. A multilevel exploratory factor analysis was performed to analyze the factorial structure. The studied companies’ safety conditions were also analyzed. RESULTS: Different factorial structures were found between and within levels. In general, the results show the presence of a group-level safety climate. The scores of safety climates are directly and positively related to companies’ safety conditions; the organizational scale is the one that best reflects the actual safety conditions. CONCLUSIONS: The SCWI instrument allows for the identification of different safety climates in groups that comprise the same furniture company and it seems to reflect those groups’ safety conditions. The study also demonstrates the need for a multilevel analysis of the studied instrument.

Innovation in “low-tech” industries: Portuguese footwear industry

ICEIM – International Conference in Entrepreneurship and Innovation Management, Roma, 17-18 de setembro de 2015.

L’imaginaire et la reliance dans la sociologie de Durkheim

[Excerto] Le positivisme durkheimien n’a jamais fait l’ombre d’un doute. Dans Les règles de la méthode sociologique, Durkheim s’est fixé la tâche de définir a priori le statut de la sociologie en se réclamant explicitement du rationalisme, entendu comme modèle théorique et pratique : « Notre principal objectif, en effet, est d’étendre à la conduite humaine le rationalisme scientifique, en faisant voir que, considérée dans le passé, elle est réductible à des rapports de cause à effet qu’une opération non moins rationnelle peut transformer ensuite en règles d’action pour l’avenir 1. » La science sociologique a donc pour vocation de faire accéder ce qui est encore irrationnel à l’ordre du rationnel en le rendant intelligible et d’apporter ainsi sa contribution à un projet de transformation de la société selon les canons de la raison.