Performance Analysis of IP based WSNs in real time systems

Wireless sensor networks (WSNs) are the key enablers of the internet of things (IoT) paradigm. Traditionally, sensor network research has been to be unlike the internet, motivated by power and device constraints. The IETF 6LoWPAN draft standard changes this, defining how IPv6 packets can be efficiently transmitted over IEEE 802.15.4 radio links. Due to this 6LoWPAN technology, low power, low cost micro- controllers can be connected to the internet forming what is known as the wireless embedded internet. Another IETF recommendation, CoAP allows these devices to communicate interactively over the internet. The integration of such tiny, ubiquitous electronic devices to the internet enables interesting real-time applications. This thesis work attempts to evaluate the performance of a stack consisting of CoAP and 6LoWPAN over the IEEE 802.15.4 radio link using the Contiki OS and Cooja simulator, along with the CoAP framework Californium (Cf). Ultimately, the implementation of this stack on real hardware is carried out using a raspberry pi as a border router with T-mote sky sensors as slip radios and CoAP servers relaying temperature and humidity data. The reliability of the stack was also demonstrated during scalability analysis conducted on the physical deployment. The interoperability is ensured by connecting the WSN to the global internet using different hardware platforms supported by Contiki and without the use of specialized gateways commonly found in non IP based networks. This work therefore developed and demonstrated a heterogeneous wireless sensor network stack, which is IP based and conducted performance analysis of the stack, both in terms of simulations and real hardware.

Diseño de un sistema de telefonía IP para implementarse en el cantón Santa Marta municipio de Ciudad Victoria, Cabañas

Diseño de un sistema de telefonía utilizando el protocolo VoIP, el cual se implementó en el cantón Santa Marta, municipio de Ciudad Victoria, Cabañas, usando enlaces inalámbricos a 24.6 Hz. El sistema permite la integración de teléfonos Smartphone gracias al uso del software FreePbx el cual corre dentro de un dispositivo Raspberry PI

Diseño e implementación de un sistema por telemetría medición de la resistividad del suelo

La resistividad aparente del suelo resulta útil para conocer las características geofísicas del suelo, para sistemas de puesta a tierra e incluso para la exploración de minerales. Los métodos de prospección geoeléctrica permiten obtener el valor de resistividad del suelo en distintos puntos del terreno mediante la inyección de corriente eléctrica continua utilizando electrodos ubicados en el suelo. El procedimiento de obtener diferentes medidas de resistividad en distintos puntos y de manera continua resulta un proceso complicado y demorado. Por tales motivos, el objetivo de este proyecto consiste en diseñar e implementar un sistema telemétrico para la medición de la resistividad del suelo, el cual realice la conmutación automática de los electrodos para obtener mediciones en distintos puntos y que transmita los datos a una estación fija mediante módulos de radio frecuencia. La estación fija posee un minicomputador Raspberry PI que recibe los datos, los visualiza a tiempo real en una pantalla LCD y los guarda en un archivo de texto. Adicionalmente tiene instalado un servidor FTP que permite la descarga de los archivos. Para realizar las mediciones se utilizan dos métodos de prospección geoeléctrica: sondeo eléctrico vertical y calicata eléctrica mediante las configuraciones de electrodos, Wenner y Schlumberger. Los datos de resistividad obtenidos con estos métodos permiten realizar gráficas de la variación de resistividad con respecto a la profundidad y la distancia. Además, se comparan los datos de resistividad con respecto a las precipitaciones pluviales ocurridas en un rango de tiempo determinado y se obtiene una relación inversamente proporcional.

Un sistema di domotica per il controllo energetico domestico con tecnologie open-source.

Data la sempre maggiore richiesta di fabbisogno energetico, si è sviluppata una nuova filosofia nella gestione dei consumi energetici, il DSM (demand side management), che ha lo scopo di incoraggiare il consumatore ad usare energia in modo più intelligente e coscienzioso. Questo obiettivo, unito all’accumulo di energia da fonti rinnovabili, permetterà un abbassamento dell’utilizzo dell’energia elettrica proveniente dal consumo di fonti non rinnovabili e altamente inquinanti come quelle a combustibili fossili ed una diminuzione sia del consumo energetico, sia del costo per produrre energia che dell’energia stessa. L’home automation e la domotica in ambiente domestico rappresentano un esempio di DSM. L’obiettivo di questa tesi è quello di creare un sistema di home automation utilizzando tecnologie opensource. Sono stati utilizzati device come board Arduino UNO, Raspberry Pi ed un PC con sistema operativo GNU/Linux per creare una simulazione di un sistema di home automation abbinato alla gestione di celle fotovoltaiche ed energy storaging. Il sistema permette di poter spegnere un carico energetico in base a delle particolari circostanze come, per esempio, il superamento di una certa soglia di consumo di energia elettrica. Il software utilizzato è opensource e mira a poter ottimizzare il consumo energetico secondo le proprie finalità. Il tutto a dimostrare che si può creare un sistema di home automation da abbinare con il presente e futuro delle fonti rinnovabili utilizzando tecnologie libere in modo tale da preservare privacy e security oltre che customizzazione e possibilità di adattamento a diverse circostanze. Nella progettazione del sistema è stato implementato un algoritmo per gestire varie situazioni all’interno di un ambiente domestico. La realizzazione di tale algoritmo ha prodotto ottimi risultati nella raggiungimento degli obiettivi prefissati. Il progetto di questa tesi può essere ulteriormente ampliato ed il codice è reperibile in un repository pubblico.

Routex: un Router Multitecnologia per Internet of Things

L'Internet of Things (IoT) è oggetto di grande interesse per la ricerca e per l'industria. Le numerose tecnologie che sono state sviluppate rendono possibile la creazione di nuovi e utili servizi, ma introducono problemi legati alla reciproca incompatibilità. Nell'elaborato si analizza nel dettaglio questa situazione e si descrive l'implementazione di un sistema che ha come obiettivo la realizzazione di una rete composta da dispositivi che fanno uso di tecnologie differenti. Il progetto usa un Raspberry Pi come router, il cui scopo è quello di gestire le differenze fra gli standard di comunicazione utilizzati. Le tecnologie wireless supportate sono: WiFi, Bluetooth, ZigBee, nRF24L01 e moduli radio 433MHz. Sulla rete cosi formata è inoltre possibile lo sviluppo di applicazioni IoT, grazie alle logiche di funzionamento messe a disposizione dal sistema.

Indoor positioning system for mobile devices using radio frequency and perfect sequences

Recent advancements in the area of nanotechnology have brought us into a new age of pervasive computing devices. These computing devices grow ever smaller and are being used in ways which were unimaginable before. Recent interest in developing a precise indoor positioning system, as opposed to existing outdoor systems, has given way to much research heading into the area. The use of these small computing devices offers many conveniences for usage in indoor positioning systems. This thesis will deal with using small computing devices Raspberry Pi’s to enable and improve position estimation of mobile devices within closed spaces. The newly patented Orthogonal Perfect DFT Golay coding sequences will be used inside this scenario, and their positioning properties will be tested. After that, testing and comparisons with other coding sequences will be done.

Sistemi integrati per il monitoraggio dell’ambiente e la salvaguardia dei libri nei locali universitari

Negli ultimi anni l’evoluzione tecnologica ha avuto un incremento esponenziale; ogni anno, numerose innovazioni, hanno portato notevoli cambiamenti sulla vita dei consumatori e sul modo in cui essi interagiscono. Al giorno d’oggi, la tecnologia ha raggiunto livelli tali da renderne necessario l’utilizzo per poter soddisfare vari tipi di bisogni. In questa situazione, lo sviluppo di Internet ha consentito di poter entrare in una nuova era, quella dell’Internet of Things (IoT). Questo nuovo modello sarebbe in grado di portare grossi benefici nella vita di tutte le persone, partendo dalle grandi aziende, fino ad arrivare ai singoli consumatori. L’idea di questo progetto di tesi è di posizionare un dispositivo, in grado di poter rilevare temperatura ed umidità dell’ambiente, nei locali universitari nei quali sono immagazzinati i libri, in modo tale da poter monitorare l’andamento termico degli spazi ed eventualmente effettuare delle operazioni di ripristino della temperatura e dell’umidità per evitare il danneggiamento e il deterioramento dei materiali. In questo documento di tesi andremo ad approfondire l’implementazione del dispositivo IoT in grado di rilevare i dati dell’ambiente. Nello specifico analizzeremo l’ambito applicativo di questo dispositivo, l’implementazione del sistema su una scheda Raspberry Pi 4, sfruttando anche un componente aggiuntivo contenente in sensori necessari al funzionamento del sistema, e vedremo nello specifico anche l’implementazione della pagina Web creata per la visualizzazione dei dati. Negli ultimi anni abbiamo vissuto una grande crisi a livello sanitario e oggi stiamo passando un periodo di difficoltà economica dovuta all’aumento del costo di alcune materie prime quali elettricità e gas. I futuri sviluppi su questo progetto potrebbero portare a risolvere in piccolo alcuni di questi problemi.

Spacecraft Collision Probability Calculation from Conjunction Data Message and High Precision Orbit Propagator

The increasing number of Resident Space Objects (RSOs) is a threat to spaceflight operations. Conjunction Data Messages (CDMs) are sent to satellite operators to warn for possible future collision and their probabilities. The research project described herein pushed forward an algorithm that is able to update the collision probability directly on-board starting from CDMs and the state vector of the hosting satellite which is constantly updated thanks to an onboard GNSS receiver. A large set of methods for computing the collision probability was analyzed in order to find the best ones for this application. The selected algorithm was then tested to assess and improve its performance. Finally, parts of the algorithm and external software were implemented on a Raspberry Pi 3B+ board to demonstrate the compatibility of this approach with computational resources similar to those typically available onboard modern spacecraft.

Design and implementation of a vibrational condition monitoring system

Industrial companies, particularly those with induction motors and gearboxes as integral components of their systems, are utilizing Condition Monitoring (CM) systems more frequently in order to discover the need for maintenance in advance, as traditional maintenance only performs tasks when a failure has been identified. Utilizing a CM system is essential to boost productivity and minimize long-term failures that result in financial loss. The more exact and practical the CM system, the better the data analysis, which adds to a more precise maintenance forecast. This thesis project is a cooperation with PEI Vibration Monitoring s.r.l. to design and construct a low-cost vibrational condition monitoring system to check the health of induction motors and gearboxes automatically. Moreover, according to the company's request, such a system should have specs comparable to NI 9234, one of the company's standard Data Acquisition (DAQ) boards, but at a significantly cheaper price. Additionally, PEI VM Company has supplied all hardware and electronic components. The suggested CM system is capable of highprecision autonomous monitoring of induction motors and gearboxes, and it consists of a Raspberry Pi 3B and MCC 172 DAQ board.

Nuclear incoherent photoproduction of pi(0) and eta from 4 to 12 GeV

The mechanism of incoherent pi(0) and eta photoproduction from complex nuclei is investigated from 4 to 12 GeV with an extended version of the multicollisional Monte Carlo (MCMC) intranuclear cascade model. The calculations take into account the elementary photoproduction amplitudes via a Regge model and the nuclear effects of photon shadowing, Pauli blocking, and meson-nucleus final-state interactions. The results for pi(0) photoproduction reproduced for the first time the magnitude and energy dependence of the measured rations sigma(gamma A)/sigma(gamma N) for several nuclei (Be, C, Al, Cu, Ag, and Pb) from a Cornell experiment. The results for eta photoproduction fitted the inelastic background in Cornell's yields remarkably well, which is clearly not isotropic as previously considered in Cornell's analysis. With this constraint for the background, the eta -> gamma gamma. decay width was extracted using the Primakoff method, combining Be and Cu data [Gamma(eta ->gamma gamma) = 0.476(62) keV] and using Be data only [Gamma(eta ->gamma gamma) = 0.512(90) keV]; where the errors are only statistical. These results are in sharp contrast (similar to 50-60%) with the value reported by the Cornell group [Gamma(eta ->gamma gamma). = 0.324(46) keV] and in line with the Particle Data Group average of 0.510(26) keV.

Detailed study of the K(L)->pi(0)pi(0)pi(0) Dalitz plot

Using a sample of 68.3x10(6) K(L)->pi(0)pi(0)pi(0) decays collected in 1996-1999 by the KTeV (E832) experiment at Fermilab, we present a detailed study of the K(L)->pi(0)pi(0)pi(0) Dalitz plot density. We report the first observation of interference from K(L)->pi(+)pi(-)pi(0) decays in which pi(+)pi(-) rescatters to pi(0)pi(0) in a final-state interaction. This rescattering effect is described by the Cabibbo-Isidori model, and it depends on the difference in pion scattering lengths between the isospin I=0 and I=2 states, a(0)-a(2). Using the Cabibbo-Isidori model, and fixing (a(0)-a(2))m(pi)(+)=0.268 +/- 0.017 as measured by the CERN-NA48 collaboration, we present the first measurement of the K(L)->pi(0)pi(0)pi(0) quadratic slope parameter that accounts for the rescattering effect: h(000)=(+0.59 +/- 0.20(stat)+/- 0.48(syst)+/- 1.06(ext))x10(-3), where the uncertainties are from data statistics, KTeV systematic errors, and external systematic errors. Fitting for both h(000) and a(0)-a(2), we find h(000)=(-2.09 +/- 0.62(stat)+/- 0.72(syst)+/- 0.28(ext))x10(-3), and m(pi)(+)(a(0)-a(2))=0.215 +/- 0.014(stat)+/- 0.025(syst)+/- 0.006(ext); our value for a(0)-a(2) is consistent with that from NA48.

Search for the rare decay K(L)->pi(0)pi(0)gamma

The KTeV E799 experiment has conducted a search for the rare decay K(L)->pi(0)pi(0)gamma via the topology K(L)->pi(0)pi(0)(D)gamma (where pi(0)(D)->gamma e(+)e(-)). Because of Bose statistics of the pi(0) pair and the real nature of the photon, the K(L)->pi(0)pi(0)gamma decay is restricted to proceed at lowest order by the CP conserving direct emission (DE) of an E2 electric quadrupole photon. The rate of this decay is interesting theoretically since chiral perturbation theory predicts that this process vanishes at level O(p(4)). Therefore, this mode probes chiral perturbation theory at O(p(6)). In this paper we report a determination of an upper limit of 2.43x10(-7) (90% CL) for K(L)->pi(0)pi(0)gamma. This is approximately a factor of 20 lower than previous results.

Final results from the KTeV experiment on the decay KL ->pi(0)gamma gamma

We report on a new measurement of the branching ratio B(K(L) -> pi(0)gamma gamma) using the KTeV detector. We reconstruct 1982 events with an estimated background of 608, that results in B(K(L) -> pi(0)gamma gamma)=(1.29 +/- 0.03(stat) +/- 0.05(syst)) x 10(-6). We also measure the parameter, a(V), which characterizes the strength of vector meson exchange terms in this decay. We find a(V) = -0.31 +/- 0.05(stat) +/- 0.07(syst). These results utilize the full KTeV data set collected from 1997 to 2000 and supersede earlier KTeV measurements of the branching ratio and a(V).

Cross section and double helicity asymmetry for eta mesons and their comparison to pi(0) production in p plus p collisions at root s=200 GeV

Measurements of double-helicity asymmetries in inclusive hadron production in polarized p + p collisions are sensitive to helicity-dependent parton distribution functions, in particular, to the gluon helicity distribution, Delta g. This study focuses on the extraction of the double-helicity asymmetry in eta production ((p) over right arrow + (p) over right arrow -> eta + X), the eta cross section, and the eta/pi(0) cross section ratio. The cross section and ratio measurements provide essential input for the extraction of fragmentation functions that are needed to access the helicity-dependent parton distribution functions.

High p(T) direct photon and pi(0) triggered azimuthal jet correlations and measurement of k(T) for isolated direct photons in p plus p collisions at root s=200 GeV

Correlations of charged hadrons of 1< p(T) < 10 Gev/c with high pT direct photons and pi(0) mesons in the range 5< p(T) < 15 Gev/c are used to study jet fragmentation in the gamma + jet and dijet channels, respectively. The magnitude of the partonic transverse momentum, k(T), is obtained by comparing to a model incorporating a Gaussian kT smearing. The sensitivity of the associated charged hadron spectra to the underlying fragmentation function is tested and the data are compared to calculations using recent global fit results. The shape of the direct photon-associated hadron spectrum as well as its charge asymmetry are found to be consistent with a sample dominated by quark-gluon Compton scattering. No significant evidence of fragmentation photon correlated production is observed within experimental uncertainties.