A proteomic approach to identifying proteins differentially expressed in conidia and mycelium of the entomopathogenic fungus Metarhizium acridum

Metarhizium spp. is an important worldwide group of entomopathogenic fungi used as an interesting alternative to chemical insecticides in programs of agricultural pest and disease vector control. Metarhizium conidia are important in fungal propagation and also are responsible for host infection. Despite their importance, several aspects of conidial biology, including their proteome, are still unknown. We have established conidial and mycelial proteome reference maps for Metarhizium acridum using two-dimensional gel electrophoresis (2-DE) and matrix-assisted laser desorption/ionization-time of flight-mass spectrometry (MALDI-TOF MS). In all, 1130 +/- 102 and 1200 +/- 97 protein spots were detected in ungerminated conidia and fast-growing mycelia, respectively. Comparison of the two protein-expression profiles reveled that only 35 % of the protein spots were common to both developmental stages. Out of 94 2-DE protein spots (65 from conidia, 25 from mycelia and two common to both) analyzed using mass spectrometry, seven proteins from conidia, 15 from mycelia and one common to both stages were identified. The identified protein spots exclusive to conidia contained sequences similar to known fungal stress-protector proteins (such as heat shock proteins (HSP) and 6-phosphogluconate dehydrogenase) plus the fungal allergen Alt a 7, actin and the enzyme cobalamin-independent methionine synthase. The identified protein spots exclusive to mycelia included proteins involved in several cell housekeeping biological processes. Three proteins (HSP 90, 6-phosphogluconate dehydrogenase and allergen Alt a 7) were present in spots in conidial and mycelial gels, but they differed in their locations on the two gels. (c) 2010 The British Mycological Society. Published by Elsevier Ltd. All rights reserved.

Stereotactic disconnection of hypothalamic hamartoma to control seizure and behavior disturbance: case report and literature review

An 18-year-old boy with refractory epilepsy and aggressiveness associated to a hypothalamic hamartoma was submitted to a stereotactically guided lesion by thermocoagulation. The target was based on magnetic resonance (MR) images merged with computed tomography scan images taken on the day of surgery while patient was on a stereotactic frame. In order to reveal structures not discernible in MR images, the Schaltenbrand digital brain atlas was merged onto the patient`s images. Target and trajectory of the depth electrode were chosen based on three-dimensional imaging reconstructions. A surgical plan was devised to disconnect the hypothalamic hamartoma from the hypothalamus, medial forebrain bundle, fasciculus princeps, and dorsal longitudinal fasciculus. Our target was placed at the inferior portion of the posterolateral component of the hamartoma, bordering the normal hypothalamus. The patient evolved with marked lessening of aggressiveness. Seizure frequency was reduced from several seizures per day to less than one tonic-clonic seizure during sleep per month and only two episodes suggestive of partial complex seizures during daytime. These results have remained consistent over a 24-month postoperative follow-up. Functional neuroanatomy of hypothalamic connections involved in seizure propagation and aggressive behavior was reviewed.

Investigation of ultrasonic properties of PAG and MAGIC polymer gel dosimeters

Ultrasonic speed of propagation and attenuation were investigated as a function of absorbed radiation dose in PAG and MAGIC polymer gel dosimeters. Both PAG and MAGIC gel dosimeters displayed a dependence of ultrasonic parameters on absorbed dose with attenuation displaying significant changes in the dose range investigated. The ultrasonic attenuation dose sensitivity at 4 MHz in MAGIC gels was determined to be 4.7 +/- 0.3 dB m(-1) Gy(-1) and for PAG 3.9 +/- 0.3 dB m(-1) Gy(-1). Ultrasonic speed dose sensitivities were 0.178 +/- 0.006 m s(-1) Gy(-1) for MAGIC gel and -0.44 +/- 0.02 m s(-1) Gy(-1) for PAG. Density and compressional elastic modulus were investigated to explain the different sensitivities of ultrasonic speed to radiation for PAG and MAGIC gels. The different sensitivities were found to be due to differences in the compressional elastic modulus as a function of dose for the two formulations. To understand the physical phenomena underlying the increase in ultrasonic attenuation with dose, the viscoelastic properties of the gels were studied. Results suggest that at ultrasonic frequencies, attenuation in polymer gel dosimeters is primarily due to volume viscosity. It is concluded that ultrasonic attenuation significantly increases with absorbed dose. Also, the ultrasonic speed in polymer gel dosimeters is affected by changes in dosimeter elastic modulus that are likely to be a result of polymerization. It is suggested that ultrasound is a sufficiently sensitive technique for polymer gel dosimetry.

Cultivo in vitro de Crambe abyssinica Hochst. : germinação, micropropagação, estabilidade genética e anatomia foliar

Crambe (Crambe abyssinica) pertence à família Brassicaceae, originário da Etiópia e principalmente destinado à produção de forragem (30 a 32% de proteína bruta). Atualmente, tem sido bastante cultivado visando à extração de óleo vegetal. Com os atuais incentivos à busca de fontes de energias renováveis, o cultivo de crambe vem ganhando papel de destaque na produção de biodiesel por suas diversas vantagens, como: (a) rápido ciclo de vida (colhida em torno de 90 dias); (b) alta produção de biomassa; (c) alta produtividade de sementes (1000 e 1500 kg ha-1); (d) menor custo de produção em relação a outras fontes oleaginosas, como, canola, girassol e soja; (e) um percentual de óleo total na semente entre 32 e 38%, superando, por exemplo, a soja; (f) potencial de fitorremediação, eficiente na descontaminação de arsênio, cromo e outros metais pesados; e (g) elevado percentual de ácido erúcico (50 a 60%) sendo útil na indústria de plástico e lubrificante. Devido aos poucos trabalhos realizados com crambe, abre-se um vasto campo de investigações científicas que tenham como objetivo desenvolver as potencialidades dessa cultura e, consequentemente, melhorar os aspectos agronômicos e tecnológicos para seu emprego na indústria de biodiesel. Nesse contexto, as técnicas de cultivo in vitro foram importantes tanto para a propagação massal, quanto como ferramenta para uma possível aplicação de outras técnicas biotecnológicas, contribuindo para uma produção homogênea, fiel e em larga escala. Portanto, este trabalho teve como objetivo geral avaliar as condições mais favoráveis à germinação, estabelecimento in vitro e micropropagação de Crambe abyssinica Hochst., além de verificar possíveis alterações genéticas e anatômicas, possibilitando a regeneração e produção de plântulas viáveis. Para a germinação e estabecimento in vitro de crambe, as condições mais favoráveis foram em meio B5 ou WPM, na presença ou ausência de pericarpo e na presença de luz. Na micropropagação dessa espécie, uma frequência satisfatória de regeneração de brotos foi obtida a partir de segmentos apicais utilizados como explante em meio contendo 5 μM de BAP (6- benzilaminopurina), e o alongamento foi satisfatório com 1 μM de GA3 (ácido giberélico). Os marcadores moleculares ISSR (Inter-Simples Sequence Repeats) utilizados para a análise da estabilidade genética indicaram que o segmento apical de crambe é um explante confiável para a micropropagação de plantas geneticamente verdadeiras (true-to-tipe), ou seja, mantém a estabilidade genética. As diversas fontes de citocininas e concentrações utilizadas neste trabalho não promoveram mudanças, no sentido de alterar a organização e/ou a espessura em relação ao controle, e as alterações observadas na estrutura e espessura das folhas dos tratamentos de aclimatização prejudicaram o processo de estabelecimento da plântula ex vitro. Contudo, existe a necessidade de um enraizamento e aclimatização eficiente para completa propagação in vitro de crambe. Portanto, este protocolo de regeneração de plantas in vitro de crambe pode ser útil no processo de criação e desenvolvimento de novas cultivares em um tempo mais curto e no melhoramento genético usando explantes apicais.

The source of the 1722 Algarve earthquake: evidence from MCS and tsunami data

The 27 December 1722 Algarve earthquake destroyed a large area in southern Portugal generating a local tsunami that inundated the shallow areas of Tavira. It is unclear whether its source was located onshore or offshore and, in any case, what was the tectonic source responsible for the event. We analyze available historical information concerning macroseismicity and the tsunami to discuss the most probable location of the source. We also review available seismotectonic knowledge of the offshore region close to the probable epicenter, selecting a set of four candidate sources. We simulate tsunamis produced by these candidate sources assuming that the sea bottom displacement is caused by a compressive dislocation over a rectangular fault, as given by the half-space homogeneous elastic approach, and we use numerical modeling to study wave propagation and run-up. We conclude that the 27 December 1722 Tavira earthquake and tsunami was probably generated offshore, close to 37 degrees 01'N, 7 degrees 49'W.

From local to global importance measures of uncertainty propagation in composite structures

The influence of uncertainties of input parameters on output response of composite structures is investigated in this paper. In particular, the effects of deviations in mechanical properties, ply angles, ply thickness and on applied loads are studied. The uncertainty propagation and the importance measure of input parameters are analysed using three different approaches: a first-order local method, a Global Sensitivity Analysis (GSA) supported by a variance-based method and an extension of local variance to estimate the global variance over the domain of inputs. Sample results are shown for a shell composite laminated structure built with different composite systems including multi-materials. The importance measures of input parameters on structural response based on numerical results are established and discussed as a function of the anisotropy of composite materials. Needs for global variance methods are discussed by comparing the results obtained from different proposed methodologies. The objective of this paper is to contribute for the use of GSA techniques together with low expensive local importance measures.

A VLF to UHF propagation model for evaluation of high-speed railway electromagnetic interference in RF monitoring base-stations

Considering that recent european high-speed railway system has a traction power system of kV 50 Hz, which causes electromagnetic emission for the outside world, it is important to dimension the railway system emissions, using a frequency/distance dependent propagation model. This paper presents an enhanced theoretical model for VLF to UHF propagation, railway system oriented. It introduces the near field approach (crucial in low frequency propagation) and also considers the source characteristics and type of measuring antenna. Simulations are presented, and comparisons are set with earlier far field models. Using the developed model, a real case study was performed in partnership with Refer Telecom (portuguese telecom operator for railways). The new propagation model was used in order to predict the future high-speed railway electromagnetic emissions in the Lisbon north track. The results show the model's prediction capabilities and also its applicability to realistic scenarios.

Probabilistic tsunami hazard in the Northeast Atlantic from near- and far-field tectonic sources

In this article, we present the first study on probabilistic tsunami hazard assessment for the Northeast (NE) Atlantic region related to earthquake sources. The methodology combines the probabilistic seismic hazard assessment, tsunami numerical modeling, and statistical approaches. We consider three main tsunamigenic areas, namely the Southwest Iberian Margin, the Gloria, and the Caribbean. For each tsunamigenic zone, we derive the annual recurrence rate for each magnitude range, from Mw 8.0 up to Mw 9.0, with a regular interval, using the Bayesian method, which incorporates seismic information from historical and instrumental catalogs. A numerical code, solving the shallow water equations, is employed to simulate the tsunami propagation and compute near shore wave heights. The probability of exceeding a specific tsunami hazard level during a given time period is calculated using the Poisson distribution. The results are presented in terms of the probability of exceedance of a given tsunami amplitude for 100- and 500-year return periods. The hazard level varies along the NE Atlantic coast, being maximum along the northern segment of the Morocco Atlantic coast, the southern Portuguese coast, and the Spanish coast of the Gulf of Cadiz. We find that the probability that a maximum wave height exceeds 1 m somewhere in the NE Atlantic region reaches 60 and 100 % for 100- and 500-year return periods, respectively. These probability values decrease, respectively, to about 15 and 50 % when considering the exceedance threshold of 5 m for the same return periods of 100 and 500 years.

The influence of nitrogen and oxygen additions on the thermal characteristics of aluminium-based thin films

The ternary aluminium oxynitride (AlNxOy) system offers the possibility to obtain a wide range of properties by tailoring the ratio between pure Al, AlNx and AlOy and therefore opening a significant number of possible applications. In this work the thermal behaviour of AlNxOy thin films was analysed by modulated infrared radiometry (MIRR), taking as reference the binary AlOy and AlNx systems. MIRR is a non-contact and non-destructive thermal wave measurement technique based on the excitation, propagation and detection of temperature oscillations of very small amplitudes. The intended change of the partial pressure of the reactive gas (N2 and/or O2) influenced the target condition and hence the deposition characteristics which, altogether, affected the composition and microstructure of the films. Based on the MIRR measurements and their qualitative and quantitative interpretation, some correlations between the thermal transport properties of the films and their chemical/physical properties have been found. Furthermore, the potential of such technique applied in this oxynitride system, which present a wide range of different physical responses, is also discussed. The experimental results obtained are consistent with those reported in previous works and show a high potential to fulfil the demands needed for the possible applications of the systems studied. They are clearly indicative of an adequate thermal response if this particular thin film system is aimed to be applied in small sensor devices or in electrodes for biosignal acquisition, such as those for electroencephalography or electromyography as it is the case of the main research area that is being developed in the group.

Combinatorial Anti-arenaviral Therapy with the Small Molecule SKI-1/S1P Inhibitor PF-429242 and Ribavirin

Arenaviruses are enveloped negative strand viruses that cause acute and chronic infections. Several Arenaviruses can cause severe hemorrhagic fever in humans. In West Africa Lassa virus causes several hundred thousand infections per year, while Junin, Machupo, Guanarito, and Sabia virus have emerged in South America. So far, only one drug is licensed against arenaviruses, the nucleoside analogue Ribavirin (Rib), which is effective when given early in disease, but shows only minor therapeutic effects in late stages of the infection. Previous works demonstrated that processing of the arenavirus glycoprotein precursor (GPC) by the cellular proprotein convertase site 1 protease (S1P), also known as subtilisin-kexinisozyme 1 (SKI-1), is crucial for cell-to-cell propagation of infectionand production of infectious virus. Recently, the SKI-1/S1P inhibitor PF-429242wasshownto inhibit Old World arenavirusGPCprocessing, cell-to-cell propagation, and infectious virus production. In the present study, we assessed the activity of PF-429242 against processing of the GPCs of the genetically and structurally more distant New World arenaviruses and found potent inhibition of processing of the GPCs of Junin, Machupo, and Guanarito virus. Using the prototypic arenavirus lymphocytic choriomeningitis virus (LCMV), we studied the potency of PF-429242 in the context of acute and chronic infection. In line with published data, PF-429242 potently inhibited acute LCMV infection. PF-429242 was also highly active against chronic infection and drug treatment resulted in rapid extinction of the virus without emergence of drug-resistant variants. In a combinatorial drug approach, we found that PF-429242 potentiated the anti-viral effect of Rib in treatment of acute andchronic infection. Taken together, we showed that the SKI-1/S1P inhibitor PF-429242 is broadly active against GPC processing of all major human pathogenic arenaviruses. Apart from being potent in acute infection, the drug is remarkably active in clearing chronic infection and potentiated the anti-arenaviral activity of Rib.

Role and regulation of polyphosphate in leishmania parasites

Le protozoaire unicellulaire Leishmania est l'agent responsable de la leishmaniose, une maladie parasitaire humaine qui se manifeste par des lésions de la peau, se résolvant le plus souvent spontanément, jusqu'à des lésions viscérales fatales. Le parasite est transmis de l'insecte à l'hôte mammifère lors d'un repas sanguin de la mouche des sables et y réside respectivement sous formes extra- et intracellulaires. On estime que cette maladie touche environ 12 millions de personnes dans 98 pays. Etant donné que les médicaments disponibles à ce jour sont faiblement efficaces et/ou hautement toxiques, il est indispensable de consolider les connaissances sur le fonctionnement et la survie du parasite pour pouvoir développer de nouvelles stratégies de traitements et de préventions. Tous les organismes vivants, dont Leishmania, contiennent du polyphopshate (polyP). Cette molécule chargée négativement est constituée de trois jusqu'à plusieurs centaines de résidus de phosphates reliées par des liaisons à haute énergie. Le polyP sert donc de source d'énergie et de réservoir de phosphate; dans certaines espèces, il joue aussi un rôle dans l'adaptation au stress et la virulence de pathogènes. Ceci nous a amené à étudier le rôle du polyP dans le parasite Leishmania. L'enzyme responsable de la synthèse de polyP a été identifié récemment dans la levure : il s'agit de la chaperone de transport vacuolaire 4 (Vtc4). Nous avons identifié un homologue de Vtc4 chez les Trypanosomatidae, et avons donc décidé d'examiner sa fonction dans le métabolisme du polyP chez Leishmania. En éliminant l'expression de Vtc4 chez L. major et L. guyanensis, nous avons pu démontrer qu'il est indispensable pour la production de polyP chez Leishmania. De plus, nous avons constaté que ces parasites possèdent des chaînes de polyP allant de trois jusqu'à environ 300 résidus de phosphate. Le taux de polyP dans la cellule est précisément régulé et varie entre un très haut niveau durant la phase proliférative des promastigotes à un niveau bas en phase stationnaire tardive, alors que l'expression de Vtc4p reste stable. Dans les amastigotes intracellulaires, seulement des petites quantités de polyP et de Vtc4p sont détectées. En outre, l'absence de Vc4p et de polyP n'a pas d'effet significatif sur les infections in vivo de souris, ce qui indique que le polyP n'est pas nécessaire au développement de la leishmaniose. Ceci suggère que Vtc4p n 'est pas une bonne cible pour le développement de nouveaux traitements contre Leishmania. "Néanmoins, la présence du polyP favorise fortement la survie du parasite suite à un choc de température (37°C) et aide ainsi à sa persistance intracellulaire pendant les premiers jours d'infection de macrophages. En résumé, nos résultats indiquent que si le polyP a peu d'importance pendant l'infection et le développement de la leishmaniose chez la souris, il est par contre crucial pour l'adaptation à des situations de stress comme l'augmentation de la température. Le fait que le polyP a été conservé dans tous les organismes durant l'évolution suggère toutefois que cette molécule joue un rôle fondamental. Etant donné que l'absence de polyP n'a pas d'effet sur la survie des amastigotes, il pourrait être plus important dans la forme promastigote infectant la mouche des sables. - The unicellular protozoan parasite Leishmania is the causative agent of the human disease leishmaniasis, which can range from self-healing skin lesions to fatal visceral lesions. The parasite is transmitted from the insect vector to the mammalian host when the sand fly takes its blood meal and exists in an extra- and an intracellular form, respectively. The disease is estimated to affect 12 million people in 98 countries and currently available drug treatments are of relatively low potency and/or high toxicity. Thus, investigating parasite survival mechanisms and parasite adaptation to the two host environments contributes to the general understanding of Leishmania propagation and might therefore help to develop future treatments or preventions. All living cells, including Leishmania, contain a negatively charged polymer of a few up to several hundred phosphate residues. These so-called polyphosphates (polyPs) serve as an energy source and phosphate reservoir. In some organisms, polyP is also involved in adaptation to stresses and virulence of pathogens. Therefore we were interested in investigating the importance of polyP in Leishmania parasites. Recently, an eukaryotic enzyme responsible for polyP synthesis has been identified as the vacuolar transporter chaperone 4 (Vtc4) in yeast. We, and others, found a Vtc4 homologue in trypanosomatids and decided to examine its potential function in polyP metabolism. By generating VTC4 knock-out cell lines in L. major and Vtc4 knock-down cell lines in L. guyanensis, we were able to demonstrate that Vtc4p is responsible for the total amount of cellular polyP. We also observed that Leishmania polyP chain length ranges from a few up to around 300 residues and that its level is tightly regulated. PolyP abundance is highest during the logarithmic proliferating phase of promastigotes and decreases in the stationary phase, while Vtc4 protein expression remains stable during both phases. In the intracellular amastigote form, only low amounts of polyP and Vtc4p were detectable. Furthermore, absence of Vtc4p and polyP did not have a significant effect on in vivo mouse infections, indicating that polyP is not necessary for Leishmania disease progression. This suggests that Vtc4p would be a poor drug target against Leishmania infection. However, presence of the polymer strongly supported parasite survival during heat shock (37°C) and thereby promoted intracellular persistence during the first days of macrophage infections. Taken together, we found that polyP has little importance in Leishmania {in vivo) infection but that it plays a crucial role during adaptation to stress, such as heat shock. Given that polyP has been preciously conserved in all organisms during evolution it seems to play a fundamental role. Since absence of polyP does not affect amastigote survival, it might be significant for promastigote existence in the sand fly vector.

Resting-State Functional Connectivity Emerges from Structurally and Dynamically Shaped Slow Linear Fluctuations.

Brain fluctuations at rest are not random but are structured in spatial patterns of correlated activity across different brain areas. The question of how resting-state functional connectivity (FC) emerges from the brain's anatomical connections has motivated several experimental and computational studies to understand structure-function relationships. However, the mechanistic origin of resting state is obscured by large-scale models' complexity, and a close structure-function relation is still an open problem. Thus, a realistic but simple enough description of relevant brain dynamics is needed. Here, we derived a dynamic mean field model that consistently summarizes the realistic dynamics of a detailed spiking and conductance-based synaptic large-scale network, in which connectivity is constrained by diffusion imaging data from human subjects. The dynamic mean field approximates the ensemble dynamics, whose temporal evolution is dominated by the longest time scale of the system. With this reduction, we demonstrated that FC emerges as structured linear fluctuations around a stable low firing activity state close to destabilization. Moreover, the model can be further and crucially simplified into a set of motion equations for statistical moments, providing a direct analytical link between anatomical structure, neural network dynamics, and FC. Our study suggests that FC arises from noise propagation and dynamical slowing down of fluctuations in an anatomically constrained dynamical system. Altogether, the reduction from spiking models to statistical moments presented here provides a new framework to explicitly understand the building up of FC through neuronal dynamics underpinned by anatomical connections and to drive hypotheses in task-evoked studies and for clinical applications.

Effects of anomalous propagation conditions on weather radar observations

In this chapter our objective is to provide an overview of the effects of anomalous propagation conditions on weather radar observations, based mostly on studies performed by the authors during the last decade, summarizing results from recent publications, presentations, or unpublished material. We believe this chapter may be useful as an introductory text for graduate students, or researchers and practitioners dealing with this topic. Throughout the text a spherical symmetric atmosphere is assumed and the focus is on the occurrence of ground and sea clutter and subsequent problems for weather radar applications. Other related topics such as long-path, over-the-horizon propagation and detection of radar targets (either clutter or weather systems) at long ranges is not considered here; however readers should be aware of the potential problems these phenomena may have as range aliasing may cause these echoes appear nearer than they are ¿ for more details see the discussion about second trip echoes by Zrnic, this volume.

Fatigue study of the fillet weld waving on weld toe and the penetration in the weld root based on the effective notch stress approach

The fatigue failure of structures under fluctuating loads in fillet weld joints raises a demand to determine the parameters related to this type of loading. In this study, the stress distribution in the susceptible area of weld toe and weld root in fillet welded models analyzed by finite element method applying FEMAP software. To avoid the geometrical singularity on the path of analytical stress analysis in the toe and root area of a weld model the effective notch stress approach applied by which a proper fictitious rounding that mostly depend on the material of structure is applied. The models with different weld toe waving width and radius are analyzed while the flank angle of weld varied in 45 and 30 degrees. The processed results shows that the waving compare to the straight weld toe makes differences in the value of stress and consequently the stress concentration factor between the tip and depth of the waves in the weld toe which helps to protect the crack of propagation and gives enough time and tools to be informed of the crack initiation in the structure during the periodical observation of structure. In the weld root study the analyses among the models with the welding penetration percentage from non-penetration to the full-penetration shows a slightly increase in the root area stress value which comparing with the stiffening effect of penetration conclude that the half-penetration can make an optimization between the stress increase and stiffening effect of deep penetration.

In vitro culture of Phyllanthus stipulatus (Euphorbiaceae)

An efficient micropropagation protocol was developed for the medicinal plant Phyllanthus stipulatus (Euphorbiaceae) using nodal segments for axillary shoot proliferation. Maximum multiplication rates (8-9 shoots per explant) was achieved on MS media supplemented with either 2.5-5.0 muM IBA. The best basal media for axillary shoot proliferation when 0.62 muM BA was supplemented were MS, MS/2 and AR (4-5 shoots per explant). Rooting was achieved with 100% of the microshoots on MS medium without growth regulators. Regenerated plants were successfully acclimatized and about 88% of plantlets survived under ex vitro conditions. Flowering was observed in 81% of the ex vitro grown plantlets after 12 weeks of acclimatization. High frequency callus initiation and growth was achieved when nodal segment explants were inoculated either in the vertical position, in the light on MS medium supplemented with 5.0 muM NAA or horizontally oriented, in the dark on MS supplemented with 5.0 muM NAA or 1.25-5.0 muM BA or 2iP. Root cultures were successfully established on MS medium containing 1.1 muM NAA. The optimized micropropagation, callus and root culture protocols offer the possibility to use cell/organ culture techniques for vegetative propagation and secondary metabolism studies.