Asymmetric post-natal development of superior cervical ganglion of paca (Agouti paca)

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Structural and electrochemical properties of LiCoO2 prepared by combustion synthesis

LiCoO2 powders were prepared by combustion synthesis, using metallic nitrates as the oxidant and metal sources and urea as fuel. A small amount of the LiCoO2 phase was obtained directly from the combustion reaction, however, a heat treatment was necessary for the phase crystallization. The heat treatment was performed at the temperature range from 400 up to 700 degreesC for 12 h. The powders were characterized by X-ray diffraction (XRD), X ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM) and specific surface area values were obtained by BET isotherms. Composite electrodes were prepared using a mixture of LiCoO2, carbon black and poly(vinylidene fluoride) (PVDF) in the 85:10:5% w/w ratio. The electrochemical behavior of these composites was evaluated in ethylene carbonate/dimethylcarbonate solution, using lithium perchlorate as supporting electrolyte. Cyclic voltammograms showed one reversible redox process at 4.0/3.85 V and one irreversible redox process at 3.3 V for the LiCoO2 obtained after a post-heat treatment at 400 and 500 degreesC.Raman spectroscopy showed the possible presence of LiCoO2 with cubic structure for the material obtained at 400 and 500 degreesC. This result is in agreement with X-ray data with structural refinement for the LiCoO2 powders obtained at different temperatures using the Rietveld method. Data from this method showed the coexistence of cubic LiCoO2 (spinel) and rhombohedral (layered) structures when LiCoO2 was obtained at lower temperatures (400 and 500 degreesC). The single rhombohedral structure for LiCoO2 was obtained after post-heat treatment at 600 degreesC. The maximum energy capacity in the first discharge was 136 mA g(-1) for the composite electrode based on LiCoO2 obtained after heat treatment at 700 degreesC. (C) 2002 Elsevier B.V. B.V. All rights reserved.

Structural abnormalities of the thalamus in juvenile myoclonic epilepsy

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Short-Term Antiandrogen Flutamide Treatment Causes Structural Alterations in Somatic Cells Associated with Premature Detachment of Spermatids in the Testis of Pubertal and Adult Guinea Pigs

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Structural resistance in immature teeth using root reinforcements in vitro

The purpose of this study was to evaluate in vitro the efficacy of root reinforcements by light-cured composite resin or zirconium fiber post in simulated immature non-vital teeth. Fifty-six bovine incisors teeth were used for this study. The crown of each tooth was removed in the medium third to obtain a standard length of 30 mm. The specimens were divided into four groups (n = 14): G1) the root canals were instrumented and enlarged to simulate immature non-vital teeth and were reinforced with a light-cured composite resin using a translucent curing post (Luminex system); (G2) the specimens were instrumented, enlarged and they received root reinforcement with zirconium fiber post; G3 (positive control): they received similar treatment to the G1 and G2 groups, but did not receive root reinforcement; G4 (negative control): the roots were not weakened and did not receive reinforcement. Every tooth was submitted to compressive force using an Instron testing machine with an angle of 45&DEG; at a speed of 1 mm min(-1) until the fracture. The results showed a markedly increased resistance to fracture in the G1 and G2 (122.38 and 122.08 kgf, respectively). Among the results of G1 and G2 there was not any significant difference (P > 0.05) but they were significantly different from the control groups (P < 0.05). The conclusion is that the use of root reinforcements with zirconiun fiber post or composite resin can increase significantly the structural resistance of the weakened teeth, decreasing the risk of the fracture.

Rift to post-rift evolution of a passive continental margin: the Ponta Grossa Arch, SE Brazil

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Structural analyzes of the use of residues of tires in reinforced concrete

The search for an adequate destination to the tires without use is a problem for many countries. The use of tire rubber in concrete through the partial substitution of the small aggregate has for objective the withdrawal of this material of the environment besides serving as alternative material in places that present sand scarcity. However, to use this type of concrete in civil construction it's necessary to verify its structural behavior. The behavior of the adherence enters the bar of armor and the concrete surrounding it has decisive importance with relation to the load capacity of the structures of reinforced concrete. In this context, this work presents, argues and evaluates the results of the experimental studies for determination of the adherence tension according to pulling up assays pull-out normalized for CEB RC6 and also related in the ASTM C-234 in concrete with and without rubber residues. Armors of nominal diameter of 10,0; 12,5 and 16 mm had been used and concrete contend 10% of rubber fibres in substitution to the sand in volume.

Structural reforms, macroeconomic fluctuations and income distribution in Brazil

Includes bibliography

Employment and structural mobility. Revisiting a Prebischian theme

Includes bibliography

The Caribbean and the post-2015 development agenda

This paper will contend that the post-2015 development agenda presents a major opportunity for Caribbean countries to reverse decades of lagging economic performance and make the transition to balanced, holistic, and people-centred growth and development. The MDGs, while valuable in promoting gains in poverty reduction, health, education, nutrition, and maternal well-being were not tailored to the growth and development needs of the region. This can now be changed by a post-2015 development agenda which goes beyond improving the welfare of citizens by meeting basic needs and enhancing access to primary services. The necessary scaling-up of the MDG framework will require that the sustainable development goals, which will anchor the post- 2015 development agenda, are capable of promoting structural change, competitiveness and output gains while advancing social development and meeting environmental concerns. They must also address the unfinished business of the millennium development goals, primarily in the area of human development.

Immediate graft histological assay, post pig's liver transplantation

PURPOSE: To describe the vascular and tissue histopathological changes in seven sequential experimental liver transplantations in pigs. METHODS: Fourteen female pigs, Sus domesticus species, with body mass between 5 and 8 kg were utilized. After the end of all anastomoses of the graft implantation in the receptor, the animal was monitored for 30 minutes, and at its end one of the biopsies was collected for histological analysis. The histological criteria utilized were: lytic hepatocyte necrosis, density of septal and portal inflammatory infiltrated, sinusoidal congestion and hemorrhage. The analysis was performed separately for the portal region in zone 1, 2 and 3. RESULTS: Among the structural changes undergone by the graft, those with greater frequency and intensity were vascular congestion and steatosis, which stood out in transplantations 5, 6 and 7. CONCLUSIONS: The technique demonstrated vascular alterations represented by vasocongestion, edema and minimum inflammatory reaction. In relation to the parenchyma, was observed macrovacuolar pan-acinar steatosis, focal lytic and occasional hemorrhages, beyond the accumulation of hemosiderin in Kuppfer's cells.

Structure and post-translational modifications of the web silk protein spidroin-1 from Nephila spiders

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Using Proteomic Strategies for Sequencing and Post-Translational Modifications Assignment of Antigen-5, a Major Allergen from the Venom of the Social Wasp Polybia paulista

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Biophysical and Structural Characterization of the Recombinant Human eIF3L

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

P-I class metalloproteinase from Bothrops moojeni venom is a post-proline cleaving peptidase with kininogenase activity: Insights into substrate selectivity and kinetic behavior

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)