Secondary Towns Association, formed for the purchasing of one or more special survey or surveys of land in South Australia, for sites for secondary towns. Statement of the proceedings of the directors for the information of the proprietors.

Mode of access: Internet.

Vocabulary of the language spoken by the aborigines of the Southern and Eastern portions of the settled districts of South Australia, viz., by the tribes in the vicinity of Encounter Bay, and (with slight variations) by those extending along the coast to the Eastward around Lake Alexandrina and for distance up the River Murray: preceded by a grammar, showing the construction of the language as far as at present known,

Mode of access: Internet.

Handbook of South Australia.

Mode of access: Internet.

Report on cotton growing : the suitableness of the soil and climate of the Northern Territory of South Australia for the cultivation and production of cotton /

Mode of access: Internet.

Factors supporting the non-persistence of fruit fly populations in South Australia

For purposes of interstate and international fruit trade, it is necessary to demonstrate that in areas in which fruit fly species have not previously established permanent populations, but which are subject to introductions of fruit flies from outside the area, the introduced population once detected, has not become established. In this paper, we apply methodology suggested mainly by Carey (1991, 1995) to introductions of Mediterranean fruit fly (Medfly), Ceratitis capitata Weid., and Queensland fruit fly (QFF) Bactrocera tryoni Froggatt (Diptera: Tephritidae) to South Australia, a state in which these species do not occur naturally and in which introductions, once detected, are actively treated. By analysing historical data associated with fruit fly outbreaks in South Australia, we demonstrate that: (i) fruit flies occur seasonally, as would occur in established populations, except there is no evidence of the critical spring generation of either species; (ii) there is no evidence of increasing frequency of outbreaks, trapped flies or larval occurrences over 29 years; (iii) there is no evidence of decreasing time between catches of adult flies as the years progress; (iv) there is no decrease in the mean number of years between outbreaks in the same locations; (v) there is no statistically significant recurrence of outbreaks in the same locations in successive years; (vi) there is no evidence of spread of outbreaks outwards from a central location; (vii) the likelihood of outbreaks in a city or town is related to the size of the human population; (viii) introduction pathways by road from Western Australia (for Medfly) and eastern Australia (for QFF) are shown to exist and to illegally or accidentally carry considerable amounts of fruit into South Australia; and (ix) there was no association between the numbers of either Queensland fruit fly or Medfly and the spatial pattern of either loquat or cumquat trees as sources of larval food in spring. This analysis supports the hypothesis that most fruit fly outbreaks in South Australia have been the result of separate introductions of infested fruit by vehicular traffic and that most of the resultant fly outbreaks were detected and died out within a few weeks of the application of eradication procedures. An alternative hypothesis, that populations of fruit flies are established in South Australia at below detectable levels, is impossible to disprove with conventional technology, but the likelihood of it being true is minimised by our analysis. Both hypotheses could be tested soon with newly developed genetic techniques.

Concerning the house museum and the picturesque landscape in the work of Sir John Soane : with raw hints for post-heritage museum space

The picturesque aesthetic in the work of Sir John Soane, architect and collector, resonates in the major work of his very personal practice – the development of his house museum, now the Soane Museum in Lincoln’s Inn Fields in London. Soane was actively involved with the debates, practices and proponents of picturesque and classical practices in architecture and landscape and his lectures reveal these influences in the making of The Soane, which was built to contain and present diverse collections of classical and contemporary art and architecture alongside scavenged curiosities. The Soane Museum has been described as a picturesque landscape, where a pictorial style, together with a carefully defined itinerary, has resulted in the ‘apotheosis of the Picturesque interior’. Soane also experimented with making mock ruinscapes within gardens, which led him to construct faux architectures alluding to archaeological practices based upon the ruin and the fragment. These ideas framed the making of interior landscapes expressed through spatial juxtapositions of room and corridor furnished with the collected object that characterise The Soane Museum. This paper is a personal journey through the Museum which describes and then reviews aspects of Soane’s work in the context of contemporary theories on ‘new’ museology. It describes the underpinning picturesque practices that Soane employed to exceed the boundaries between interior and exterior landscapes and the collection. It then applies particular picturesque principles drawn from visiting The Soane to a speculative project for a house/landscape museum for the Oratunga historic property in outback South Australia, where the often, normalising effects of conservation practices are reviewed using minimal architectural intervention through a celebration of ruinous states.

Work at hand : an exploration of gesture in the context of work and everyday life to inform the design of gestural input devices

This research explores gestures used in the context of activities in the workplace and in everyday life in order to understand requirements and devise concepts for the design of gestural information applicances. A collaborative method of video interaction analysis devised to suit design explorations, the Video Card Game, was used to capture and analyse how gesture is used in the context of six different domains: the dentist's office; PDA and mobile phone use; the experimental biologist's laboratory; a city ferry service; a video cassette player repair shop; and a factory flowmeter assembly station. Findings are presented in the form of gestural themes, derived from the tradition of qualitative analysis but bearing some similarity to Alexandrian patterns. Implications for the design of gestural devices are discussed.

Promoting the use of cycling as an environmentally and socially sustainable form of transport.

Solar Cities Congress 2008 “Energising Sustainable Communities – Options for Our Future” THEME 3: Climate Change. Impact on Society and Culture. Sub Theme: planning and implementing holistic strategies for sustainable transport Abstract Promoting the use of cycling as an environmentally and socially sustainable form of transport. We need to reduce carbon emissions. We need to reduce fuel consumption. We need to reduce pollution. We need to reduce traffic congestion. As obesity levels and associated health problems in the developed nations continue to increase we need to adopt a healthier lifestyle. Few if any would argue with these statements. In fact many would consider these problems to be amongst the most urgent that our society faces. What if we had a vehicle that uses no fossil fuel to power it, creates no pollution, takes up far less space on the roads and promotes an active, healthy lifestyle. What if this machine would have energy efficiency levels 50 times greater than the car? This is a solution that is here, now and ready to go and many of us already own one. It is the humble bicycle. Although bicycle sales in Australia now outnumber car sales, bicycle use as a form of transport (as opposed to recreation) only constitutes around 3% to 4% of all trips. So, why are bicycles the forgotten form of transport if they promise to deliver the benefits that I have just outlined? This paper examines the underlying reasons for the relatively low use of bicycles as a means of transport. It identifies the areas of greatest potential for encouraging the use of the world’s most efficient form of transport. Tim Williams - May 2007

Validation of 3D models of the outer and inner surfaces of an ovine femur

The validation of Computed Tomography (CT) based 3D models takes an integral part in studies involving 3D models of bones. This is of particular importance when such models are used for Finite Element studies. The validation of 3D models typically involves the generation of a reference model representing the bones outer surface. Several different devices have been utilised for digitising a bone’s outer surface such as mechanical 3D digitising arms, mechanical 3D contact scanners, electro-magnetic tracking devices and 3D laser scanners. However, none of these devices is capable of digitising a bone’s internal surfaces, such as the medullary canal of a long bone. Therefore, this study investigated the use of a 3D contact scanner, in conjunction with a microCT scanner, for generating a reference standard for validating the internal and external surfaces of a CT based 3D model of an ovine femur. One fresh ovine limb was scanned using a clinical CT scanner (Phillips, Brilliance 64) with a pixel size of 0.4 mm2 and slice spacing of 0.5 mm. Then the limb was dissected to obtain the soft tissue free bone while care was taken to protect the bone’s surface. A desktop mechanical 3D contact scanner (Roland DG Corporation, MDX 20, Japan) was used to digitise the surface of the denuded bone. The scanner was used with the resolution of 0.3 × 0.3 × 0.025 mm. The digitised surfaces were reconstructed into a 3D model using reverse engineering techniques in Rapidform (Inus Technology, Korea). After digitisation, the distal and proximal parts of the bone were removed such that the shaft could be scanned with a microCT (µCT40, Scanco Medical, Switzerland) scanner. The shaft, with the bone marrow removed, was immersed in water and scanned with a voxel size of 0.03 mm3. The bone contours were extracted from the image data utilising the Canny edge filter in Matlab (The Mathswork).. The extracted bone contours were reconstructed into 3D models using Amira 5.1 (Visage Imaging, Germany). The 3D models of the bone’s outer surface reconstructed from CT and microCT data were compared against the 3D model generated using the contact scanner. The 3D model of the inner canal reconstructed from the microCT data was compared against the 3D models reconstructed from the clinical CT scanner data. The disparity between the surface geometries of two models was calculated in Rapidform and recorded as average distance with standard deviation. The comparison of the 3D model of the whole bone generated from the clinical CT data with the reference model generated a mean error of 0.19±0.16 mm while the shaft was more accurate(0.08±0.06 mm) than the proximal (0.26±0.18 mm) and distal (0.22±0.16 mm) parts. The comparison between the outer 3D model generated from the microCT data and the contact scanner model generated a mean error of 0.10±0.03 mm indicating that the microCT generated models are sufficiently accurate for validation of 3D models generated from other methods. The comparison of the inner models generated from microCT data with that of clinical CT data generated an error of 0.09±0.07 mm Utilising a mechanical contact scanner in conjunction with a microCT scanner enabled to validate the outer surface of a CT based 3D model of an ovine femur as well as the surface of the model’s medullary canal.

(Neo)Liberal doses of inequality : advance Australia where?

The relationship between social background and achievement has preoccupied educational researchers since the mid-20th century with major studies in the area reaching prominence in the late 60s. Despite five decades of research and innovation since, recent studies using OECD data have shown that the relationship is strengthening rather than weakening. In this paper, the systematic destabilisation of public education in Australia is examined as a philosophical problem stemming from a fundamental shift in political orientation, where “choice” and “aspiration” work to promote and disguise survivalism. The problem for education however extends far deeper than the inequity in Federal government funding. Whilst this is a major problem, critical scrutiny must also focus on what states can do to turn back aspects of their own education policy that work to exacerbate and entrench social disadvantage.