Análise do Desempenho de Amplificadores Ópticos Semiconductores Reflectivos em Redes Ópticas de Acesso da Próxima Geração

O constante crescimento de aplicações Internet têm vindo a contribuir para a necessidade do aumento de largura de banda na rede de acesso, o que fomenta a procura de novas soluções para redes de acesso de fibra óptica. Nesse contexto, soluções conhecidas como transmissores independentes do comprimento de onda (WIT wavelengthindependent transmitters) isto é, soluções para emissores que possam operar numa ampla gama de comprimentos de onda, poderão ser muito úteis. Sendo uma das mais promissoras o amplificador óptico semiconductor reflectivo (RSOA). Nesta dissertação foi implementado um modelo simplificado do RSOA que permite eficientemente determinar as suas características estáticas e dinâmicas. Foi também implementado um modelo de simulação, em Matlab, que permita estudar o desempenho de um sistema de comunicação por fibra óptica que utiliza RSOA e técnicas de modulação digital por desvio de fase com M estados (M-PSK M-ary Phase Shift Keying). Com o modelo de simulação foi avaliada qual a taxa de transmissão máxima atingível. A avaliação do desempenho foi feita através do cálculo da magnitude do vector erro (EVM Error Vector Magnitude), considerando os vários blocos implementados. Foi determinado o ponto óptimo de funcionamento do RSOA, sendo também avaliado do desempenho de sistema de transmissão, usando diferentes parâmetros do sinal M-PSK (M=4,16,64) com taxa de transmissão de 1Gbits/s e 10 Gbits/s considerando vários comprimentos de fibra óptica.

BPSK to ASK signal conversion using injection-locked oscillators-Part I: theory

This paper presents a new method and circuit for the conversion of binary phase-shift keying (BPSK) signals into amplitude shift keying signals. The basic principles of the conversion method are the superharmonic injection and locking of oscillator circuits, and interference phenomena. The first one is used to synchronize the oscillators, while the second is used to generate an amplitude interference pattern that reproduces the original phase modulation. When combined with an envelope detector, the proposed converter circuit allows the coherent demodulation of BPSK signals without need of any explicit carrier recovery system. The time response of the converter circuit to phase changes of the input signal, as well as the conversion limits, are discussed in detail.

BPSK to ASK signal conversion using injection-locked oscillators-part II: experiment

This paper demonstrates the feasibility of a new circuit for the conversion of binary phase-shift keying signals into amplitude-shift keying signals. In its simplest form, the converter circuit is composed by a power divider, a couple of second harmonic injection-locked oscillators, and a power combiner. The operation of the converter circuit relies on the frequency synchronization of both oscillators and the generation of an interference pattern by combining their outputs, which reproduces the original phase modulation. Two prototypes of the converter have been implemented. The first one is a hybrid version working in the 400-530-MHz frequency range. The second one has been implemented using multichip-module technology, and is intended to work in the 1.8-2.2-GHz frequency range.

Symmetric Brownian motor

In this paper, we present a model of a symmetric Brownian motor which changes the sign of its velocity when the temperature gradient is inverted. The velocity, external work, and efficiency are studied as a function of the temperatures of the baths and other relevant parameters. The motor shows a current reversal when another parameter (a phase shift) is varied. Analytical predictions and results from numerical simulations are performed and agree very well. Generic properties of this type of motor are discussed.

The Gaussian assumption in second-order estimation problems in digital communications

This paper deals with the goodness of the Gaussian assumption when designing second-order blind estimationmethods in the context of digital communications. The low- andhigh-signal-to-noise ratio (SNR) asymptotic performance of the maximum likelihood estimator—derived assuming Gaussiantransmitted symbols—is compared with the performance of the optimal second-order estimator, which exploits the actualdistribution of the discrete constellation. The asymptotic study concludes that the Gaussian assumption leads to the optimalsecond-order solution if the SNR is very low or if the symbols belong to a multilevel constellation such as quadrature-amplitudemodulation (QAM) or amplitude-phase-shift keying (APSK). On the other hand, the Gaussian assumption can yield importantlosses at high SNR if the transmitted symbols are drawn from a constant modulus constellation such as phase-shift keying (PSK)or continuous-phase modulations (CPM). These conclusions are illustrated for the problem of direction-of-arrival (DOA) estimation of multiple digitally-modulated signals.

Cue-dependent circuits for illusory contours in humans.

NlmCategory="UNASSIGNED">Objects' borders are readily perceived despite absent contrast gradients, e.g. due to poor lighting or occlusion. In humans, a visual evoked potential (VEP) correlate of illusory contour (IC) sensitivity, the "IC effect", has been identified with an onset at ~90ms and generators within bilateral lateral occipital cortices (LOC). The IC effect is observed across a wide range of stimulus parameters, though until now it always involved high-contrast achromatic stimuli. Whether IC perception and its brain mechanisms differ as a function of the type of stimulus cue remains unknown. Resolving such will provide insights on whether there is a unique or multiple solutions to how the brain binds together spatially fractionated information into a cohesive perception. Here, participants discriminated IC from no-contour (NC) control stimuli that were either comprised of low-contrast achromatic stimuli or instead isoluminant chromatic contrast stimuli (presumably biasing processing to the magnocellular and parvocellular pathways, respectively) on separate blocks of trials. Behavioural analyses revealed that ICs were readily perceived independently of the stimulus cue-i.e. when defined by either chromatic or luminance contrast. VEPs were analysed within an electrical neuroimaging framework and revealed a generally similar timing of IC effects across both stimulus contrasts (i.e. at ~90ms). Additionally, an overall phase shift of the VEP on the order of ~30ms was consistently observed in response to chromatic vs. luminance contrast independently of the presence/absence of ICs. Critically, topographic differences in the IC effect were observed over the ~110-160ms period; different configurations of intracranial sources contributed to IC sensitivity as a function of stimulus contrast. Distributed source estimations localized these differences to LOC as well as V1/V2. The present data expand current models by demonstrating the existence of multiple, cue-dependent circuits in the brain for generating perceptions of illusory contours.

Study of Control Methods of a High-Frequency Cycloconverter for Domestic Induction Heating Appliances

A high-frequency cyclonverter acts as a direct ac-to-ac power converter circuit that does not require a diode bidge rectifier. Bridgeless topology makes it possible to remove forward voltage drop losses that are present in a diode bridge. In addition, the on-state losses can be reduced to 1.5 times the on-state resistance of switches in half-bridge operation of the cycloconverter. A high-frequency cycloconverter is reviewed and the charging effect of the dc-capacitors in ``back-to-back'' or synchronous mode operation operation is analyzed. In addition, a control method is introduced for regulating dc-voltage of the ac-side capacitors in synchronous operation mode. The controller regulates the dc-capacitors and prevents switches from reaching overvoltage level. This can be accomplished by variating phase-shift between the upper and the lower gate signals. By adding phase-shift between the gate signal pairs, the charge stored in the energy storage capacitors can be discharged through the resonant load and substantially, the output resonant current amplitude can be improved. The above goals are analyzed and illustrated with simulation. Theory is supported with practical measurements where the proposed control method is implemented in an FPGA device and tested with a high-frequency cycloconverter using super-junction power MOSFETs as switching devices.

Detection of acute cerebral hemorrhage in rabbits by magnetic induction

Acute cerebral hemorrhage (ACH) is an important clinical problem that is often monitored and studied with expensive devices such as computed tomography, magnetic resonance imaging, and positron emission tomography. These devices are not readily available in economically underdeveloped regions of the world, emergency departments, and emergency zones. We have developed a less expensive tool for non-contact monitoring of ACH. The system measures the magnetic induction phase shift (MIPS) between the electromagnetic signals on two coils. ACH was induced in 6 experimental rabbits and edema was induced in 4 control rabbits by stereotactic methods, and their intracranial pressure and heart rate were monitored for 1 h. Signals were continuously monitored for up to 1 h at an exciting frequency of 10.7 MHz. Autologous blood was administered to the experimental group, and saline to the control group (1 to 3 mL) by injection of 1-mL every 5 min. The results showed a significant increase in MIPS as a function of the injection volume, but the heart rate was stable. In the experimental (ACH) group, there was a statistically significant positive correlation of the intracranial pressure and MIPS. The change of MIPS was greater in the ACH group than in the control group. This high-sensitivity system could detect a 1-mL change in blood volume. The MIPS was significantly related to the intracranial pressure. This observation suggests that the method could be valuable for detecting early warning signs in emergency medicine and critical care units.

Qualité du sommeil et de la vigilance suite à un ajustement circadien partiel lors d’une simulation de travail de nuit.

Le travail de nuit est associé avec plusieurs problèmes de santé. Le désalignement entre la phase circadienne et le cycle éveil-sommeil cause une désynchronie interne considérée comme la principale source de ces problèmes. L’ajustement circadien au travail de nuit est proposé comme contremesure. Normalement, l’ajustement circadien complet n’est pas recommandé puisqu’il engendre un désalignement circadien lors du retour à l’horaire de jour, causant des changements de phase répétés et la désynchronie interne. L’ajustement circadien partiel est alors proposé comme compromis afin de stabiliser les rythmes circadiens des travailleurs de nuit. Cependant, l’ampleur de l’ajustement circadien partiel nécessaire à l’amélioration du sommeil et de la vigilance demeure vague. Les ajustements partiels obtenus par délai ou avance de phase sont quantifiés non seulement par la phase du début de la sécrétion de mélatonine en lumière tamisée, mais également par le recoupement de l’épisode de sécrétion de mélatonine avec les périodes d’éveil et de sommeil. Les effets sur le sommeil et la vigilance d’un petit ajustement circadien partiel significatifs sont investigués dans une simulation de travail de nuit en laboratoire pour déterminer leurs implications cliniques. Les effets modestes suggèrent qu’un petit délai de phase peut réduire l’accumulation de la dette de sommeil, alors que l’avance de phase améliore subjectivement la vigilance et l’humeur nocturne. L’ampleur absolue du changement de phase est associée à une amélioration subjective de la vigilance et de l’humeur nocturne. Des études en milieux de travail permettraient de déterminer si ces stratégies sont applicables et bénéfiques aux travailleurs de nuit.

Electron Density Determination of Laser Induced Plasma from Polymethyl Methacrylate Using Phaseshift Detection Technique

Irradiation of a Polymethyl methacrylate target using a pulsed Nd-YAG laser causes plasma formation in the vicinity of the target. The refractive index gradient due to the presence of the plasma is probed using phase-shift detection technique. The phase-shift technique is a simple but sensitive technique for the determination of laser ablation threshold of solids. The number density of laser generated plasma above the ablation threshold from Polymethyl methacrylate is calculated as a function of laser fluence. The number density varies from 2×1016 cm-3 to 2×1017 cm-3 in the fluence interval 2.8-13 J · cm-2.

Chemical gas sensors based on functionalized self-actuated piezo-resistive cantilevers

Der Schwerpunkt dieser Arbeit liegt in der Anwendung funktionalisierter Mikrocantilever mit integrierter bimorpher Aktuation und piezo-resistiver Detektion als chemische Gassensoren für den schnellen, tragbaren und preisgünstigen Nachweis verschiedener flüchtiger Substanzen. Besondere Beachtung erfährt die Verbesserung der Cantilever-Arbeitsleistung durch den Betrieb in speziellen Modi. Weiterer Schwerpunkt liegt in der Untersuchung von spezifischen Sorptionswechselwirkungen und Anwendung von innovativen Funktionsschichten, die bedeutend auf die Sensorselektivität wirken.

Transport of Sub-micron Aerosols in Bifurcations

The convective-diffusive transport of sub-micron aerosols in an oscillatory laminar flow within a 2-D single bifurcation is studied, using order-of-magnitude analysis and numerical simulation using a commercial software (FEMLAB®). Based on the similarity between momentum and mass transfer equations, various transient mass transport regimes are classified and scaled according to Strouhal and beta numbers. Results show that the mass transfer rate is highest at the carinal ridge and there is a phase-shift in diffusive transport time if the beta number is greater than one. It is also shown that diffusive mass transfer becomes independent of the oscillating outer flow if the Strouhal number is greater than one.

Improved and optimal dual circular 32-QAM for MB-OFDM

Quadrature Phase Shift Keying (QPSK) and Dual Carrier Modulation (DCM) are currently used as the modulation schemes for Multiband Orthogonal Frequency Division Multiplexing (MB-OFDM) in the ECMA-368 defined Ultra-Wideband (UWB) radio platform. ECMA-368 has been chosen as the physical radio platform for many systems including Wireless USB (W-USB), Bluetooth 3.0 and Wireless HDMI; hence ECMA-368 is an important issue to consumer electronics and the users’ experience of these products. To enable the transport of high-rate USB, ECMA-368 offers up to 480 Mb/s instantaneous bit rate to the Medium Access Control (MAC) layer, but depending on radio channel conditions dropped packets unfortunately result in a lower throughput. This paper presents improvement on a high data rate modulation scheme that fits within the configuration of the current standard increasing system throughput by achieving 600 Mb/s (reliable to 3.2 meters) thus maintaining the high rate USB throughput even with a moderate level of dropped packets. The modulation system is termed improved and optimal Dual Circular 32-QAM (DC 32-QAM). The system performance for improved and optimal DC 32-QAM modulation is presented and compared with previous DC 32- QAM, 16-QAM and DCM.

Changes in light intensity can influence age at sexual maturity in domestic pullets

1. Shaver White and ISA Brown pullets were reared to 140 d in groups of 8 in cages on a 10-h photoperiod of incandescent light and maintained at an illuminance of 3 or 25 lux, or transferred from 3 to 25 lux or from 25 to 3 lux at 63 or 112 d of age. 2. There was no significant difference in sexual maturity, measured as eggs per 100 bird.d at 139 and 140 d, for ISA Brown maintained on 3 or 25 lux, but Shaver White pullets exposed to constant 3 lux matured significantly later than those maintained on 25 lux. 3. In Shaver Whites, sexual maturity was significantly delayed by an increase from 3 to 25 lux at 63 and 112 d, and advanced by a decrease from 25 to 3 lux at 112 d. Sexual maturity of ISA Browns was not significantly affected by a change in illuminance at 63 or 112 d, though responses were in the same direction as for Shaver Whites. 4. In both breeds, total feed consumed to 112 d was higher for birds on 3 lux than 25 lux, but lower between 112 d and 140 d when birds on 25 lux underwent rapid sexual development. In both breeds, body weight at 63 d was higher for birds exposed to 3 lux than 25 lux, but body weight gain thereafter was similar for the two light intensities. 5. In both breeds, plasma luteinising hormone (LH) concentration at 63 and 112 d was lower in birds maintained on 3 lux than 25 lux. At 63 and 112 d, transfers from 25 to 3 lux depressed, whereas transfers from 3 to 25 lux at 63 d, but not at 112 d, increased plasma LH. 6. Advances or delays in sexual maturity induced by changes in illuminance were not correlated with differences in feed intake, body weight gain, or with changes in plasma LH. 7. One possible explanation for the inverse relationship between the direction of change in illuminance at 63 and 112 d in pullets exposed to a 10-h photoperiod and the age at which they became sexually mature is that changes in light intensity and/or spectral composition affect the entrainment of the circadian rhythm of photoinducibility, to effect a phase shift in the photoinducible phase and/or the responsiveness of phototransduction pathways.

Development of a method fon non-destructive testing of fruits using scanning laser vibrometry (SLV)

Quality control on fruits requires reliable methods, able to assess with reasonable accuracy and possibly in a non-destructive way their physical and chemical characteristics. More specifically, a decreased firmness indicates the presence of damage or defects in the fruit or else that the fruit has exceeded its “best before date”, becoming unsuitable for consumption. In high-value exotic fruits, such as mangoes, where firmness cannot be easily measured from a simple observation of texture, colour changes and unevenness of fruits surface, the use of non-destructive techniques is highly recommendable. In particular, the application of Laser vibrometry, based on the Doppler effect, a non-contact technique sensitive to differences in displacements inferior to the nanometre, appears ideal for a possible on-line control on food. Previous results indicated that a phase shift can be in a repeatable way associated with the presence of damage on the fruit, whilst a decreased firmness results in significant differences in the displacement of the fruits under the same excitation signal. In this work, frequency ranges for quality control via the application of a sound chirp are suggested, based on the measurement of the signal coherence. The variations of the average vibration spectrum of a grid of points, or of point-by-point signal velocity allows the go-no go recognition of “firm” and “over-ripe” fruits, with notable success in the particular case of mangoes. The future exploitation of this work will include the application of this method to allow on-line control during conveyor belt distribution of fruits.