A Comparative Policy Analysis of Seat Belt Laws, RB37-013, 2014

This analysis examined data from a variety of sources to estimate the benefit of enhancing Iowa’s current law to require all passengers to use seat belts. In addition to assessing Iowans’ opinions about changing the law, a literature review, a legislative policy review, and analysis of Iowa crash data were completed. Currently 28 states enforce seat belt laws for all passengers. Belted passengers riding with an unbelted passenger are 2 to 5 times more likely to suffer fatal injuries in a crash relative to when all occupants are using seat belts. Iowans are highly compliant (90%-94%) with the current seat belt law for front seat occupants. Of more than 1000 Iowans surveyed, 85% said they always use a seat belt when riding in the front seat, but only 36% always do so when they ride in the back seat. The most common reasons given for not using seat belts in the back seat are forgetting to buckle up and because it is not the law. Iowans widely support strengthening Iowa’s seat belt law — 62% said Iowa law should require all rear seat passengers to use seat belts. Four out of five respondents said they would use seat belts more often when sitting in the rear seat if it was the law. It is estimated rear seat fatalities would decrease about 48%, from 13 to 7 fatalities annually, if an all-passenger law was implemented in Iowa.

Modeling and Synthesis of Tracking Control for the Belt Drive System

Usingof belt for high precision applications has become appropriate because of the rapid development in motor and drive technology as well as the implementation of timing belts in servo systems. Belt drive systems provide highspeed and acceleration, accurate and repeatable motion with high efficiency, long stroke lengths and low cost. Modeling of a linear belt-drive system and designing its position control are examined in this work. Friction phenomena and position dependent elasticity of the belt are analyzed. Computer simulated results show that the developed model is adequate. The PID control for accurate tracking control and accurate position control is designed and applied to the real test setup. Both the simulation and the experimental results demonstrate that the designed controller meets the specified performance specifications.

High-pressure metamorphism in the Adula nappe - Guide to the excursion of the Swiss Society of Mineralogy and Petrology (September 29 - October 5, 1991)

1st day: Lithology and structure of the northern Adula nappe around Zervreila 2nd day: High-pressure rocks of the Suretta nappe, the middle Adula nappe and its Mesozoic cover - Eclogite near Innerferrara, Suretta nappe - Crossite-bearing prasinite from schistes lustres near Nufenen - Eclogites south of Hinterrhein, Adula nappe - Blueschists and eclogites from Neu-Wahli, Misox zone 3 days: Eclogite boudin and associated whiteschists in the uppermost Calanca valley, middle Adula nappe 4th day: Eclogites, associated metapelites and granitoid gneisses of Trescolmen, middle Adula nappe 5th day: The ultramafic-mafic suite of the Cima Lunga nappe around Cima di Gagnone 6th day: Garnet peridotites and eclogites from Alpe Arami, Cima Lunga nappe

Dynamic analysis of belt-drives using the absolute nodal coordinate formulation

Belt-drive systems have been and still are the most commonly used power transmission form in various applications of different scale and use. The peculiar features of the dynamics of the belt-drives include highly nonlinear deformation,large rigid body motion, a dynamical contact through a dry friction interface between the belt and pulleys with sticking and slipping zones, cyclic tension of the belt during the operation and creeping of the belt against the pulleys. The life of the belt-drive is critically related on these features, and therefore, amodel which can be used to study the correlations between the initial values and the responses of the belt-drives is a valuable source of information for the development process of the belt-drives. Traditionally, the finite element models of the belt-drives consist of a large number of elements thatmay lead to computational inefficiency. In this research, the beneficial features of the absolute nodal coordinate formulation are utilized in the modeling of the belt-drives in order to fulfill the following requirements for the successful and efficient analysis of the belt-drive systems: the exact modeling of the rigid body inertia during an arbitrary rigid body motion, the consideration of theeffect of the shear deformation, the exact description of the highly nonlinear deformations and a simple and realistic description of the contact. The use of distributed contact forces and high order beam and plate elements based on the absolute nodal coordinate formulation are applied to the modeling of the belt-drives in two- and three-dimensional cases. According to the numerical results, a realistic behavior of the belt-drives can be obtained with a significantly smaller number of elements and degrees of freedom in comparison to the previously published finite element models of belt-drives. The results of theexamples demonstrate the functionality and suitability of the absolute nodal coordinate formulation for the computationally efficient and realistic modeling ofbelt-drives. This study also introduces an approach to avoid the problems related to the use of the continuum mechanics approach in the definition of elastic forces on the absolute nodal coordinate formulation. This approach is applied to a new computationally efficient two-dimensional shear deformable beam element based on the absolute nodal coordinate formulation. The proposed beam element uses a linear displacement field neglecting higher-order terms and a reduced number of nodal coordinates, which leads to fewer degrees of freedom in a finite element.

Bioinspired electronic white cane implementation based on a LIDAR, a tri-axial accelerometer and a tactile belt

This work proposes the creation of a bioinspired electronic white cane for blind people using the whiskers principle for short-range navigation and exploration. Whiskers are coarse hairs of an animal's face that tells the animal that it has touched something using the nerves of the skin. In this work the raw data acquired from a low-size terrestrial LIDAR and a tri-axial accelerometer is converted into tactile information using several electromagnetic devices configured as a tactile belt. The LIDAR and the accelerometer are attached to the user’s forearm and connected with a wire to the control unit placed on the belt. Early validation experiments carried out in the laboratory are promising in terms of usability and description of the environment.

Stratigraphy and petrology of the Miocene Montjuic delta: (Barcelona, Spain).

The Neogene rift in the Catalan Coastal Ranges, which is located in the NE part of the Eastern Iberian Margin, corresponds to a system of grabens formed at the nort h - we s t e rn edge of the Valencia Trough. In the central part of the Catalan Coastal Ranges are the Valls - Peneds half-graben in the onshore and the Barcelona half-graben in the offshore, which are separated by the Garraf and the Collserola-Montnegre horsts. Montjuc hill is a tilted block, which is located to the S of the Barcelona city, between the Collserola-Montn egre horst and the Barcelona half-graben . The Middle Miocene section of Montjuc is constituted by an alternation of conglomerate, sandstone, mudstone and marlstone beds. The Montjuc section was divided into four lithostratigraphic units from base to top: (1) The Morrot conglomerate and sandstone Unit, interpreted as delta plain deposits; (2) the Castell conglomerate, sandstone and mudstone Unit considered as proximal delta front deposits; (3) the Miramar marlstone Unit attributed

Centralized Motion Control of a Linear Tooth Belt Drive: Analysis of the Performance and Limitations

A centralized robust position control for an electrical driven tooth belt drive is designed in this doctoral thesis. Both a cascaded control structure and a PID based position controller are discussed. The performance and the limitations of the system are analyzed and design principles for the mechanical structure and the control design are given. These design principles are also suitable for most of the motion control applications, where mechanical resonance frequencies and control loop delays are present. One of the major challenges in the design of a controller for machinery applications is that the values of the parameters in the system model (parameter uncertainty) or the system model it self (non-parametric uncertainty) are seldom known accurately in advance. In this thesis a systematic analysis of the parameter uncertainty of the linear tooth beltdrive model is presented and the effect of the variation of a single parameter on the performance of the total system is shown. The total variation of the model parameters is taken into account in the control design phase using a Quantitative Feedback Theory (QFT). The thesis also introduces a new method to analyze reference feedforward controllers applying the QFT. The performance of the designed controllers is verified by experimentalmeasurements. The measurements confirm the control design principles that are given in this thesis.

Belt conveyor energy efficiency analysis and energy model development

An energy model of a belt conveyor was designed. Operation of a belt conveyor was researched. Operational indexes were calculated. Energy optimization process and recommendations were presented.

The conveyor belt hypothesis for thymocyte migration: participation of adhesion and de-adhesion molecules

Thymocyte differentiation is the process by which bone marrow-derived precursors enter the thymus, proliferate, rearrange the genes and express the corresponding T cell receptors, and undergo positive and/or negative selection, ultimately yielding mature T cells that will represent the so-called T cell repertoire. This process occurs in the context of cell migration, whose cellular and molecular basis is still poorly understood. Kinetic studies favor the idea that these cells leave the organ in an ordered pattern, as if they were moving on a conveyor belt. We have recently proposed that extracellular matrix glycoproteins, such as fibronectin, laminin and type IV collagen, among others, produced by non-lymphoid cells both in the cortex and in the medulla, would constitute a macromolecular arrangement allowing differentiating thymocytes to migrate. Here we discuss the participation of both molecules with adhesive and de-adhesive properties in the intrathymic T cell migration. Functional experiments demonstrated that galectin-3, a soluble ß-galactoside-binding lectin secreted by thymic microenvironmental cells, is a likely candidate for de-adhesion proteins by decreasing thymocyte interaction with the thymic microenvironment.

Comentarios a la Ponencia de GO -PKI en el Gobierno de Ontario

Gestión del conocimiento

Ontario high school sport : an investigation of organizational design and its context

In 2002, The Ontario Federation of School Athletic Associations (OFSAA) identified that in providing extracurricular sport programs schools are faced with the 'new realities' of the education system. Although research has been conducted exploring the pressures impacting the provision of extracurricular school sport (Donnelly, Mcloy, Petherick, & Safai, 2000), few studies within the field have focused on understanding extracurricular school sport from an organizational level. The focus of this study was to examine the organizational design (structure, systems, and values) of the extracurricular sport department within three Ontario high schools, as well as to understand the context within which the departments exist. A qualitative multiple case study design was adopted and three public high schools were selected from one district school board in Ontario to represent the cases under investigation. Interviews, observations and documents were used to analyze the extracurricular sport department design of each case and to better understand the context within which the departments exist. As the result of the analysis of the structure, systems and values of each case, two designs emerged- Design KT1 and Design KT2. Differences in the characteristics of design archetype KT1 and KT2 centered on the design dimension of values, and therefore this study identified that contrasting organizational values reflect differences in design types. The characteristics of the Kitchen Table archetype were found to be transferable to the sub-sector of extracurricular school sport, and therefore this research provides a springboard for further research in organizational design within the education sector of extracurricular high school sport. Interconnections were found between the data associated with the external and internal contexts within which the extracurricular sport departments exist. The analysis of the internal context indicated the important role played by organizational members in shaping the context within which the departments exist. The analysis of the external context highlighted the institutional pressures that were present within the education environment. Both political and cultural expectations related to the role of extracurricular sport within schools were visible and were subsequently used by the high schools to create legitimacy and prestige, and to access resources.

Changing roles of nurse educators employed in acute and chronic care settings : the impact of professional and statutory mandates in Ontario at four sites of one hospital corporation /

The role of the hospital-employed nurse educator is evolving. Factors influencing this change include the introduction of standards for nurse educators by the College of Nurses of Ontario (CNO), a change in the way nurses are educated, the emergence of nursing as a profession, and hospital restructuring as a result of budgetary constraints. Two of these influencing factors: the introduction of the updated Standards of Practice for Registered Nurses and Registered Practical Nurses (1996) and hospital restructuring occurred over the last 7 years at several hospitals in southern Ontario. Current literature as well as the Standards of Practice (1996) were utilized to examine the current roles and responsibilities of nurse educators and subsequently develop a questionnaire to study the impact of these influencing factors on the role of the nurse educator. This questionnaire was piloted and revised before its distribution at 4 hospitals in southern Ontario. Twenty-five of the 41 surveys (61%) distributed were returned for analysis. The data reflected that the Standards of Practice had a positive influence on the role of the nurse educator, while hospital restructuring had a negative impact. In addition, many of the roles and responsibilities identified in the literature were indeed part of the current role of nurse educators, as well as several responsibilities not captured in the literature. The predictions for the future of this role in its current state were not positive given the financial status of the health care system as well as the lack of clarity for the role and the current level ofjob satisfaction among practicing nurse educators. However, a list of recommendations were generated which, if implemented, could add clarity to the role and improve job satisfaction. This could enhance the retention of current nurse educators and the possibility of recruiting competent nurse educators to the role in the future.

Evaluating three self-help smoking cessation interventions for post-secondary smokers : a randomized controlled trial on six Ontario campuses

Objective. Smoking prevalence is highest among the young adult cohort. Postsecondary students are no exception. Although many students intend to quit smoking, no research has established what methods best promote reductions in, or complete abstinence from smoking. This randomized controlled trial examined the effectiveness of three self-help smoking cessation interventions. Method. On six post-secondary campuses, 483 smokers who voluntarily accessed Leave The Pack Behind (a tobacco control initiative) were randomly assigned to one of three smoking cessation interventions: One Step At A Time (a 2-booklet, *gold standard' program for adults); Smoke|Quit (a newly-developed 2-booklet program for young adult students); and usual care (a 'Quit Kit' containing a booklet on stress management, information about pharmacological quitting aides and novelty items). All participants also received one proactive telephone support call from a peer counsellor. During the study, 85 participants withdrew. The final sample of 216 students who completed baseline questionnaires and 12-week follow-up telephone interviews was representative of the initial sample in terms of demographic characteristics, and smokingquitting- related variables. Results. Whether participants quit smoking depended upon treatment condition, ^(2, N=2\6) = 6.34, p = .04, with Smoke|Quit producing more successfijl quitters (18.4%) than One Step At A Time (4.5%) or the Quit Kit (1 1.4%). On average, participants had quit 53.46 days, with no significant difference across treatments. Selfefficacy also increased. Use of the intervention or other quitting aides was not associated with treatment condition. Among the 191 participants who did not quit smoking, treatment condition did not influence outcomes. Overall, 46.2% had made a quit attempt. Significant decreases in weekly tobacco consumption and increases in self-efficacy to resist smoking were observed from baseline to follow-up. Conclusion. Post-secondary institutions represent a potentially final opportunity for age-targeted interventions. Self-help resources tailored to students' social and contextual characteristics will have considerable more impact than stage-only tailored interventions. Both reduction and abstinence outcomes should be emphasized to positively support students to stop smoking.

From protest to powerlessness : a Marxist analysis of the Ontario NDP /

Using Marxist state theory as an analytical framework, this thesis explains the problems faced by the Ontario New Democratic Party government (1990-1995) in implementing a social democratic agenda. Not only was the government constrained in its ability to implement progressive policy, but it was also pushed to implement a Social Contract (involving legislated wage cuts to public sector employees) that alienated the party's base of support, making it more difficult for the party to organize in the future. Although this study relies predominantly on a reinterpretation of existing research on the topic, some primary research is used in the analysis, including interviews with members of the labour movement and former MPPs and analysis of the news media's treatment of the party/ government. Historical and class analytical perspectives are used to explain the evolution of the ONDP's structure and policies, as well as to assess the relative strength of the working class and its ability to support a social democratic political agenda. It was found that the ONDP' s unwillingness to develop a long term plan for social democracy, and its inability to act as a mass party or to build a strong working class movement, made it more difficult for the party to succeed when it formed the government. Moreover, the class nature of the capitalist state, along with pressure exerted by a well mobilized capitalist class, worked to limit the government' s options.