park(ing) day

Walking through the city, passersby are occasionally jolted out of the mundane by surprises that seem out of place or incongruous with the expected urban function––a hidden cafe, or an unknown public art project. If you happen to be wandering through a major city on the third Friday of September each year, you might encounter a parking space that has been temporarily transformed into a "park" with green grass, a bench and an umbrella, perhaps a lemonade stand, a nursery, or an interactive space with a survey about local issues.

Predictors of initiating and maintaining active commuting to work using transport and public health perspectives in Australia

Objective To identify predictors for initiating and maintaining active commuting (AC) to work following the 2003 Australia's Walk to Work Day (WTWD) campaign. Methods Pre- and post-campaign telephone surveys of a cohort of working age (18–65years) adults (n = 1100, 55% response rate). Two dependent campaign outcomes were assessed: initiating or maintaining AC (i.e., walk/cycle and public transport) on a single day (WTWD), and increasing or maintaining health-enhancing active commuting (HEAC) level (≥ 30min/day) in a usual week following WTWD campaign. Results A significant population-level increase in HEAC (3.9%) was observed (McNemar's χ2 = 6.53, p = 0.01) with 136 (19.0%) achieving HEAC at post campaign. High confidence in incorporating walking into commute, being active pre-campaign and younger age (< 46years) were positively associated with both outcomes. The utility of AC for avoiding parking hassles (AOR = 2.1, 95% CI: 1.2–3.6), for less expense (AOR = 1.8, 95% CI: 1.1–3.1), for increasing one's health (AOR = 2.5, 95% CI: 1.1–5.6) and for clean air (AOR = 2.2, 95% CI: 1.0–4.4) predicted HEAC outcome whereas avoiding the stress of driving (AOR = 2.6, 95% CI: 1.4–5.0) and the hassle of parking predicted the single-day AC. Conclusions Transportation interventions targeting parking and costs could be further enhanced by emphasizing health benefits of AC. AC was less likely to occur among inactive employees.

Statutory right of user - its impact in practice?

Scenario 1 A buys a two storey commercial building built along the only street frontage to the property. Vehicles cannot reach the rear of the property as the building extends across the entire width of the land. A bought the building with full knowledge that vehicular access to the rest of the property had been compromised by a desire to obtain maximum street frontage for the building which was occupied by a commercial tenant. On street parking is scarce in the surrounding area. A (to the knowledge of the adjoining owner B) constructs a carpark at the rear of the building. The employees of A’s tenant have been using the carpark obtaining access via a driveway on B’s land. To formalise this arrangement, A seeks a right of way for vehicles to travel down B’s driveway to access the carpark...

Benchmarking the standard of environmental management practised in marinas

Most existing marinas are boat parking/storing and servicing facilities that have been built over a long period of time for the convenience of local boat owners.

Role of rainfall and catchment characteristics on urban stormwater quality

Urbanisation significantly changes the characteristics of a catchment as natural areas are transformed to impervious surfaces such as roads, roofs and parking lots. The increased fraction of impervious surfaces leads to changes to the stormwater runoff characteristics, whilst a variety of anthropogenic activities common to urban areas generate a range of pollutants such as nutrients, solids and organic matter. These pollutants accumulate on catchment surfaces and are removed and trans- ported by stormwater runoff and thereby contribute pollutant loads to receiving waters. In summary, urbanisation influences the stormwater characteristics of a catchment, including hydrology and water quality. Due to the growing recognition that stormwater pollution is a significant environmental problem, the implementation of mitigation strategies to improve the quality of stormwater runoff is becoming increasingly common in urban areas. A scientifically robust stormwater quality treatment strategy is an essential requirement for effective urban stormwater management. The efficient design of treatment systems is closely dependent on the state of knowledge in relation to the primary factors influencing stormwater quality. In this regard, stormwater modelling outcomes provide designers with important guidance and datasets which significantly underpin the design of effective stormwater treatment systems. Therefore, the accuracy of modelling approaches and the reliability modelling outcomes are of particular concern. This book discusses the inherent complexity and key characteristics in the areas of urban hydrology and stormwater quality, based on the influence exerted by a range of rainfall and catchment characteristics. A comprehensive field sampling and testing programme in relation to pollutant build-up, an urban catchment monitoring programme in relation to stormwater quality and the outcomes from advanced statistical analyses provided the platform for the knowledge creation. Two case studies and two real-world applications are discussed to illustrate the translation of the knowledge created to practical use in relation to the role of rainfall and catchment characteristics on urban stormwater quality. An innovative rainfall classification based on stormwater quality was developed to support the effective and scientifically robust design of stormwater treatment systems. Underpinned by the rainfall classification methodology, a reliable approach for design rainfall selection is proposed in order to optimise stormwater treatment based on both, stormwater quality and quantity. This is a paradigm shift from the common approach where stormwater treatment systems are designed based solely on stormwater quantity data. Additionally, how pollutant build-up and stormwater runoff quality vary with a range of catchment characteristics was also investigated. Based on the study out- comes, it can be concluded that the use of only a limited number of catchment parameters such as land use and impervious surface percentage, as it is the case in current modelling approaches, could result in appreciable error in water quality estimation. Influential factors which should be incorporated into modelling in relation to catchment characteristics, should also include urban form and impervious surface area distribution. The knowledge created through the research investigations discussed in this monograph is expected to make a significant contribution to engineering practice such as hydrologic and stormwater quality modelling, stormwater treatment design and urban planning, as the study outcomes provide practical approaches and recommendations for urban stormwater quality enhancement. Furthermore, this monograph also demonstrates how fundamental knowledge of stormwater quality processes can be translated to provide guidance on engineering practice, the comprehensive application of multivariate data analyses techniques and a paradigm on integrative use of computer models and mathematical models to derive practical outcomes.

Use of personal mobility devices for first-and-last mile travel: The Macquarie-Ryde trial

Electric-motored personal mobility devices (PMDs) are appearing on Australian roads. While legal to import and own, their use is typically illegal for adult riders within the road transport system. However, these devices could provide an answer to traffic congestion by getting people out of cars for short trips (“first-and-last mile” travel). City of Ryde council, Macquarie University, and Transport for NSW examined PMD use within the road transport system. Stage 1 of the project examined PMD use within a controlled pedestrian environment on the Macquarie University campus. Three PMD categories were used: one-wheelers (an electric unicycle, the Solowheel); two-wheelers (an electric scooter, the Egret); and three-wheelers (the Qugo). The two-wheeled PMD was most effective in terms of flexibility. In contrast, the three-wheeled PMD was most effective in terms of speed. One-wheeled PMD riders were very satisfied with their device, especially at speed, but significant training and practice was required. Two-wheeled PMD riders had less difficulty navigating through pedestrian precincts and favoured the manoeuvrability of the device as the relative narrowness of the two-wheeled PMD made it easier to use on a diversity of path widths. The usability of all PMDs was compromised by the weight of the devices, difficulties in ascending steeper gradients, portability, and parking. This was a limited trial, with a small number of participants and within a unique environment. However, agreement has been reached for a Stage 2 extension into the Macquarie Park business precinct for further real-world trials within a fully functional road transport system.

Exterior view of Hauptsynagoge; Herzog Maxstrasse, Munich Synagogues

From donor letter: This is a photograph of the main synagogue of Munich, Germany. It was razed, stone by stone, in 1937 to establish a parking lot. I attended this synagogue as a child, with my parents and younger brother, until it was destroyed. Signed Melly (Engelberg) Resnicow.

Translating emotional insights into digital channel designs: Opportunities to enhance the airport experience

Purpose The purpose of this study is to identify and understand the emotions behind a passenger’s airport experience and how this can inform digital channel engagements. Design/methodology/approach This study investigates the emotional experience of two hundred (200) passengers’ journeys at an Australian domestic airport. A survey was conducted which implemented the use of Emocards and an interview approach of laddering. The responses were then analysed into attributes, consequences and values. Findings The results indicate that across key stages of the airport (parking, retail, gates and arrivals) passengers had different emotional experiences (positive, negative and neutral). The attributes, consequences and values behind these emotions were then used to propose digital channel content and purpose of various future digital channel engagements. Research limitations/implications By gaining emotional insights airports are able to generate digital channel engagements, which align with passengers’ needs and values rather than internal operational motivations. Theoretical contributions include the development of the Technology Acceptance Model to include emotional drivers as influences in the use of digital channels. Originality/value This research provides a unique method to understand the passengers’ emotional journey across the airport infrastructure and suggest how to better design digital channel engagements to address passenger latent needs.

Performing immobility / protesting immobility: The risks & rewards of public space protest performances

Though there is much interest in mobilities and performing mobilities as a characteristic of modern, urban, social life today, this is not always matched by attention to immobilities, as the flipside of mobility in modern life. In this paper, I investigate public space performances designed to draw attention to precisely this counterpoint to current discourses of mobilities – performances about the socially produced immobilities many people with disabilities find a more fundamental feature of day-to-day life, the fight for mobility, and the freedom found when accommodations for alternative mobilities are made available. Although public policy is increasingly aligned with a social model of disability, which sees disability as socially constructed through systems, institutions and infrastructure deliberately designed to exclude specific bodies – stairs, curbs, queues and so forth – and although governments in the US, UK, and to a lesser degree Australia, New Zealand and other Commonwealth nations aim to address these inequalities, the experience of immobility is still every-present for many people. This often comes not just from pain, or from impairment, or event from lack of accommodations for alternative mobilities, but from fellow social performers’ antipathy to, appropriation of, or destruction of accommodations designed to facilitate access for a range of different bodies in public space, and thus the public sphere. The archetypal instance of this tension between the mobile, and those needing accommodations to allow mobility, is, of course, the antipathy many able bodied people feel towards the provision of disabled parking spaces. A cursory search online shows thousands of accounts of antagonism, vitriol, and even violence prompted by disputes which began when a disabled person asked an able person to exit a designated disabled parking space. For many, it seems, expecting them to pass by such parks so others can experience the mobility they take for granted is too much. In this paper, I examine a number of protest performances in public space in which activist present actions – for example, placing wheelchairs in every regular parking space in a precinct – to give bystanders, passersby and spectators, as well as antagonistic fellow social performers, a sense of what socially produced immobility feels like. I examine responses to such protest performances, and what they say about the potential social, political and ethical impacts of such protests, in terms of their potential to produce new attitudes to mobility, alternative mobility, and access to alternative modes of mobility.

Theatre, networked performance, and notions of ‘democratised’ spectatorship

The potential to cultivate new relationships with spectators has long been cited as a primary motivator for those using digital technologies to construct networked or telematics performances or para-performance encounters in which performers and spectators come together in virtual – or at least virtually augmented – spaces and places. Today, with Web 2.0 technologies such as social media platforms becoming increasingly ubiquitous, and increasingly easy to use, more and more theatre makers are developing digitally mediated relationships with spectators. Sometimes for the purpose of an aesthetic encounter, sometimes for critical encounter, or sometimes as part of an audience politicisation, development or engagement agenda. Sometimes because this is genuinely an interest, and sometimes because spectators or funding bodies expect at least some engagement via Facebook, Twitter or Instagram. In this paper, I examine peculiarities and paradoxes emerging in some of these efforts to engage spectators via networked performance or para-performance encounters. I use examples ranging from theatre, to performance art, to political activism – from ‘cyberformaces’ on Helen Varley Jamieson’s Upstage Avatar Performance Platform, to Wafaa Bilal’s Domestic Tension installation where spectators around the world could use a webcam in a chat room to target him with paintballs while he was in residence in a living room set up in a gallery for a week, as a comment on use of drone technology in war, to Liz Crow’s Bedding Out where she invited people to physically and virtually join her in her bedroom to discuss the impact of an anti-disabled austerity politics emerging in her country, to Dislife’s use of holograms of disabled people popping up in disabled parking spaces when able bodied drivers attempted to pull into them, amongst others. I note the frequency with which these performance practices deploy discourses of democratisation, participation, power and agency to argue that these technologies assist in positioning spectators as co-creators actively engaged in the evolution of a performance (and, in politicised pieces that point to racism, sexism, or ableism, pushing spectators to reflect on their agency in that dramatic or daily-cum-dramatic performance of prejudice). I investigate how a range of issues – from the scenographic challenges in deploying networked technologies for both participant and bystander audiences others have already noted, to the siloisation of aesthetic, critical and audience activation activities on networked technologies, to conventionalised dramaturgies of response informed by power, politics and impression management that play out in online as much as offline performances, to the high personal, social and professional stakes involved in participating in a form where spectators responses are almost always documented, recorded and re-represented to secondary and tertiary sets of spectators via the circulation into new networks social media platforms so readily facilitate – complicate discourses of democratic co-creativity associated with networked performance and para-performance activities.

Automatic Road Extraction using High Resolution Satellite Image Based on Texture Progressive Analysis and Normalized Cut Method

In this paper the approach for automatic road extraction for an urban region using structural, spectral and geometric characteristics of roads has been presented. Roads have been extracted based on two levels: Pre-processing and road extraction methods. Initially, the image is pre-processed to improve the tolerance by reducing the clutter (that mostly represents the buildings, parking lots, vegetation regions and other open spaces). The road segments are then extracted using Texture Progressive Analysis (TPA) and Normalized cut algorithm. The TPA technique uses binary segmentation based on three levels of texture statistical evaluation to extract road segments where as, Normalizedcut method for road extraction is a graph based method that generates optimal partition of road segments. The performance evaluation (quality measures) for road extraction using TPA and normalized cut method is compared. Thus the experimental result show that normalized cut method is efficient in extracting road segments in urban region from high resolution satellite image.

Automatic road extraction using high resolution satellite images based on Level Set and Mean Shift methods

Analysis of high resolution satellite images has been an important research topic for urban analysis. One of the important features of urban areas in urban analysis is the automatic road network extraction. Two approaches for road extraction based on Level Set and Mean Shift methods are proposed. From an original image it is difficult and computationally expensive to extract roads due to presences of other road-like features with straight edges. The image is preprocessed to improve the tolerance by reducing the noise (the buildings, parking lots, vegetation regions and other open spaces) and roads are first extracted as elongated regions, nonlinear noise segments are removed using a median filter (based on the fact that road networks constitute large number of small linear structures). Then road extraction is performed using Level Set and Mean Shift method. Finally the accuracy for the road extracted images is evaluated based on quality measures. The 1m resolution IKONOS data has been used for the experiment.

Optimization of bus allocation to depots by minimizing dead kilometers

In metropolitan cities, public transportation service plays a vital role in mobility of people, and it has to introduce new routes more frequently due to the fast development of the city in terms of population growth and city size. Whenever there is introduction of new route or increase in frequency of buses, the nonrevenue kilometers covered by the buses increases as depot and route starting/ending points are at different places. This non-revenue kilometers or dead kilometers depends on the distance between depot and route starting point/ending point. The dead kilometers not only results in revenue loss but also results in an increase in the operating cost because of the extra kilometers covered by buses. Reduction of dead kilometers is necessary for the economic growth of the public transportation system. Therefore, in this study, the attention is focused on minimizing dead kilometers by optimizing allocation of buses to depots depending upon the shortest distance between depot and route starting/ending points. We consider also depot capacity and time period of operation during allocation of buses to ensure parking safety and proper maintenance of buses. Mathematical model is developed considering the aforementioned parameters, which is a mixed integer program, and applied to Bangalore Metropolitan Transport Corporation (BMTC) routes operating presently in order to obtain optimal bus allocation to depots. Database for dead kilometers of depots in BMTC for all the schedules are generated using the Form-4 (trip sheet) of each schedule to analyze depot-wise and division-wise dead kilometers. This study also suggests alternative locations where depots can be located to reduce dead kilometers. Copyright (C) 2015 John Wiley & Sons, Ltd.

Developing effective restoration plans to tackle the widespread impairment of coastal swimming and shellfishing waters

Congress established a legal imperative to restore the quality of our surface waters when it enacted the Clean Water Act in 1972. The act requires that existing uses of coastal waters such as swimming and shellfishing be protected and restored. Enforcement of this mandate is frequently measured in terms of the ability to swim and harvest shellfish in tidal creeks, rivers, sounds, bays, and ocean beaches. Public-health agencies carry out comprehensive water-quality sampling programs to check for bacteria contamination in coastal areas where swimming and shellfishing occur. Advisories that restrict swimming and shellfishing are issued when sampling indicates that bacteria concentrations exceed federal health standards. These actions place these coastal waters on the U.S. Environmental Protection Agencies’ (EPA) list of impaired waters, an action that triggers a federal mandate to prepare a Total Maximum Daily Load (TMDL) analysis that should result in management plans that will restore degraded waters to their designated uses. When coastal waters become polluted, most people think that improper sewage treatment is to blame. Water-quality studies conducted over the past several decades have shown that improper sewage treatment is a relatively minor source of this impairment. In states like North Carolina, it is estimated that about 80 percent of the pollution flowing into coastal waters is carried there by contaminated surface runoff. Studies show this runoff is the result of significant hydrologic modifications of the natural coastal landscape. There was virtually no surface runoff occurring when the coastal landscape was natural in places such as North Carolina. Most rainfall soaked into the ground, evaporated, or was used by vegetation. Surface runoff is largely an artificial condition that is created when land uses harden and drain the landscape surfaces. Roofs, parking lots, roads, fields, and even yards all result in dramatic changes in the natural hydrology of these coastal lands, and generate huge amounts of runoff that flow over the land’s surface into nearby waterways. (PDF contains 3 pages)

Análisis comparativo de alternativas o soluciones de sistemas estructurales en acero y madera para marquesinas de aparcamiento

[ES]En este trabajo se hace un análisis y una comparación de las diferentes formas estructurales que puede adoptar una marquesina de aparcamiento, principalmente estructuras hechas en madera y acero. Para la realización del citado análisis se han valorado las ventajas y desventajas de los materiales, funcionalidad, mantenimiento, estética, dificultad de ejecución y economicidad, realizándose asimismo un diseño de marquesina utilizando uno u otro de los materiales citados. Para la ejecución de la marquesina, se formula un diseño que cumplimente los condicionantes de funcionalidad del elemento. A su vez, se analiza, parte por parte, todo el sistema estructural, empezando por determinar las acciones que van a aparecer y deberán ser transmitidas al terreno. Una vez obtenidos los esfuerzos que se han de transmitir, se formula una hipótesis de calidad del terreno de cimentación, con el fin de determinar las características de la cimentación. Previamente se realiza un predimensionado del sistema estructural, para cuyo cálculo se ha utilizado el programa informático Tricalc. Obtenidas las dimensiones exactas y los detalles constructivos para cada una de las opciones de materiales a analizar (madera y acero), se evalúa económicamente cada diseño obtenido, para determinar la solución más económica y rentable desde el punto de vista, por ejemplo del montaje y desmontaje, así como por el mantenimiento. Además de las funciones estructurales, también se analiza la adaptación al entorno de la madera y el acero.