Nanocrystalline TiO(2) preparation by microwave route and nature of anatase-rutile phase transition in nano TiO(2)

Nanopowders of TiO(2) has been prepared using a microwave irradiation-assisted route, starting from a metalorganic precursor, bis(ethyl-3-oxo-butanoato)oxotitanium (IV), [TiO(etob)(2)](2). Polyvinylpyrrolidone (PVP) was used as a capping agent. The as-prepared amorphous powders crystallize into anatase phase, when calcined. At higher calcination temperature, the rutile phase is observed to form in increasing quantities as the calcination temperature is raised. The structural and physicochemical properties were measured using XRD, FT-IR, SEM, TEM and thermal analyses. The mechanisms of formation of nano-TiO(2) from the metal-organic precursor and the irreversible phase transformation of nano TiO(2) from anatase to rutile structure at higher temperatures have been discussed. It is suggested that a unique step of initiation of transformation takes place in Ti(1/2)O layers in anatase which propagates. This mechanism rationalizes several key observations associated with the anatase rutile transformation.

Interaction of Silver Nanoparticles with Serum Proteins Affects Their Antimicrobial Activity In Vivo

The emergence of multidrug-resistant bacteria is a global threat for human society. There exist recorded data that silver was used as an antimicrobial agent by the ancient Greeks and Romans during the 8th century. Silver nanoparticles (AgNPs) are of potential interest because of their effective antibacterial and antiviral activities, with minimal cytotoxic effects on the cells. However, very few reports have shown the usage of AgNPs for antibacterial therapy in vivo. In this study, we deciphered the importance of the chosen methods for synthesis and capping of AgNPs for their improved activity in vivo. The interaction of AgNPs with serum albumin has a significant effect on their antibacterial activity. It was observed that uncapped AgNPs exhibited no antibacterial activity in the presence of serum proteins, due to the interaction with bovine serum albumin (BSA), which was confirmed by UV-Vis spectroscopy. However, capped AgNPs with citrate or poly(vinylpyrrolidone)] exhibited antibacterial properties due to minimized interactions with serum proteins. The damage in the bacterial membrane was assessed by flow cytometry, which also showed that only capped AgNPs exhibited antibacterial properties, even in the presence of BSA. In order to understand the in vivo relevance of the antibacterial activities of different AgNPs, a murine salmonellosis model was used. It was conclusively proved that AgNPs capped with citrate or PVP exhibited significant antibacterial activities in vivo against Salmonella infection compared to uncapped AgNPs. These results clearly demonstrate the importance of capping agents and the synthesis method for AgNPs in their use as antimicrobial agents for therapeutic purposes.

Multi-component Olivine for Lithium-Ion Hybrid Capacitor

A lithium-ion hybrid capacitor comprising of a battery type multi-component olivine (LiMn1/3Co1/3Ni1/3PO4) cathode and a capacitive type carbon negative electrode is reported. Olivine phosphate synthesized with chelating agent's polyvinylpyrrolidone (PVP) or triethanolamine (TEA) showed uniform carbon coating through in-situ process exhibiting a surface area 5.1 m(2)/g with porosity 0.02 cm(3)/g. The surface area for commercial carbon electrode was observed to be 1450 m(2)/g with high porosity 0.76 cm(3)/g. Galvanostatic charge/discharge cycling tests were conducted in the coin cells, olivine vs. Li, offering a cell voltage of 4.75 V vs. Li with a maximum specific capacitance of 125 F/g. In the case of olivine vs. carbon in a lithium-ion hybrid device delivered a high discharge capacitance of 86 F/g at a specific current of 0.12 A/g with a cycling retention of 53 F/g (38% loss) after 250 cycles. The obtained performance of PVP synthesized olivine material is manifested to uniform carbon coating and the trapped organic products that provide pathways for facile electrochemical reactions than their TEA counterparts.

High quality oxide-free metallic nanoparticles: a strategy for synthesis through laser ablation in aqueous medium

The paper explores the synthesis of oxide-free nanoparticles of Ag and Cu through laser ablation of pure targets under aqueous medium and tuning the quality and size through addition of Polyvinylpyrrolidone (PVP) in the medium. The size distribution of nanoparticles reduces from 37 +/- 30 nm and 13 +/- 5 nm to 32 +/- 12 nm and 4 +/- 1 nm for Ag and Cu with changes in PVP concentration from 0.00 to 0.02 M, respectively. Irregular shaped particles of Ag with Ag2O phase and a Cu-Cu2O core-shell particles form without the addition of PVP, while oxide layer is absent with 0.02 M of PVP. The recent understanding of the mechanism of particle formation during laser ablation under liquid medium allows us to rationalize our observation.

Self-assembled ZnO nanoparticles on ZnO microsheet: ultrafast synthesis and tunable photoluminescence properties

We report on the tunable photoluminescence characteristics of porous ZnO microsheets fabricated within 1-5 min of microwave irradiation in the presence of a capping agent such as citric acid, and mixture of citric acid with polyvinylpyrrolidone (PVP). The UV emission intensity reduces to 60% and visible emission increases tenfold when the molar concentration of citric acid is doubled. Further diminution of the intensity of UV emission (25%) is observed when PVP is mixed with citric acid. The addition of nitrogen donor ligands to the parent precursor leads to a red shift in the visible luminescence. The deep level emission covers the entire visible spectrum and gives an impression of white light emission from these ZnO samples. The detailed luminescence mechanism of our ZnO samples is described with the help of a band diagram constructed by using the theoretical models that describe the formation energy of the defect energy levels within the energy band structure. Oxygen vacancies play the key role in the variation of the green luminescence in the ZnO microsheets. Our research findings provide an insight that it is possible to retain the microstructure and simultaneously introduce defects into ZnO. The growth of the ZnO microsheets may be due to the self assembly of the fine sheets formed during the initial stage of nucleation.

Comparative studies of AOT and NaDEHP by fluorescence technique and z-potential (ζ) measurements

The aggregation behaviors of two surfactants with the same hydrophobic tail, sodium bis(2-ethylhexyl)sulfosuccinate (AOT) and sodium bis(2-ethylhexyl)phosphate (NaDEHP), have been investigated by the fluorescence technique and z-potential (ζ) measurements. Five fine peaks of the pyrene molecule fluorescence spectroscopy appear in the surfactant solution, and the micropolarity at which pyrene locates is monitored from the intensity ratio of the first (I1) and the third peak (I3). A wide peak around 475 nm, the emission spectra of the excimer of pyrene molecules, is observed in the NaDEHP solution, while this is not found for the AOT system. The value of I1/I3 decreases in a more limited concentration range for the AOT system than for NaDEHP, indicating that small aggregates can be more easily formed by NaDEHP molecules. The z-potential results for the aggregates formed by the two surfactants show that the interaction between AOT and PVP is stronger than that between NaDEHP and PVP.

The interaction between poly(vinylpyrrolidone) and reversed micelles of water/AOT/n-heptane

The interactions between poly(vinylpyrrolidone) (PVP) and the reversed micelles composed of water, AOT, and n-heptane are investigated with the aid of phase diagram, measurements of conductivity and viscosity, Fourier transform infrared (FTIR) spectrum, and dynamic light scattering (DLS). The phase diagrams of water/AOT/heptane in the presence of and absence of PVP are given. The conductivity of the water/AOT/heptane reversed micelle without PVP initially increases and then decreases with the increase of water content, ω0 (the molar ratio of water to AOT), while the plots of conductivity (K) versus ω0 of the reversed micelle in the presence of PVP depend on the PVP concentrations. The plot of K versus ω0 with 2.0%wt PVP is similar to that without PVP. Only the ω0,max (the water content that the maximum conductivity corresponds to) is larger than that without PVP. Nevertheless, the conductivity of the reversed micelle containing more than 4%wt PVP always rises with the increase of the water content in the measured range. The DLS results indicate that the hydrodynamic radius (Rh) in the presence and absence of PVP rises with the increase of ω0. The plots with PVP and without PVP have almost the same value when ω0<17; and after that, it quickly increases with the increase of ω0. It is interesting to find that there is almost no effect of the PVP concentration on the viscosity and Rh of the reversed micelle at ω0 = 15. The FTIR results suggest that the contents of SO3--bound water and Na+-bound water both decrease with PVP added, while the content of the bulky-like water increases. However, the trapped water in the hydrophobic chain of the surfactant is nearly unaffected by PVP. It is also found from the FTIR that the carbonyl group stretching vibration of AOT is fitted into two sub-peaks, which center at 1740 and 1729 cm-1, corresponding to the trans and cis conformations of AOT, respectively.

不同悬浮介质对激光衍射法测得的变形指数—渗透压曲线的影响

本文用PBS和PVP两种介质作为激光衍射仪的悬浮介质,系统地观测了悬浮介质物化性能不同对红细胞变形指数(DI)—渗透压曲线的影响,发现:1.在不同悬浮介质中的变形指数—渗透压曲线有显著差别,在高渗区这种差别更明显.2.同一红细胞试样,在相同高渗压下,在不同的悬浮介质中进行交叉实验表明、PBS悬浮介质能使得红细胞变形性得到恢复,而PVP悬浮介质却使得红细胞变形性显著降低.3.在高渗情况下,首次观察到红细胞变形性随时间变化,一开始DI增大,约3小时后趋于稳定,无论PBS还是PVP其趋势皆相似.

悬浮介质对红细胞变形指数—渗透压曲线的影响

<正> 用激光衍射法测得的红细胞变形指数—渗透压曲线表征红细胞可变性与缓冲液渗透压之间的关系,它与红细胞的寿命有密切关系。本文用PBS和PVP两种介质作缓冲液,系统地观测了悬浮介质物化性能不同对于红细胞变形指数—渗透压曲线的影响。结果表明: 1.在不同悬浮介质中测得的变形指数—渗透压曲线有显著差别,在高渗区尤其明

Síntese, caracterização e avaliação de materiais poliméricos com propriedades bactericidas

Nesta dissertação, foram preparados materiais poliméricos com atividade bactericida a partir de copolímeros de estireno (Sty) e divinilbenzeno (DVB) e de celulose bacteriana. Três copolímeros à base de Sty e DVB foram sintetizados através da técnica de polimerização em suspensão aquosa. Os copolímeros foram preparados com diferentes estruturas porosas, por meio da variação da composição do sistema diluente. Um copolímero comercial macrorreticulado, Amberlite XAD4, de elevada área superficial, também foi usado neste estudo com o objetivo de comparar sua estrutura polimérica e seu desempenho com o dos copolímeros sintetizados. Os copolímeros de Sty-DVB foram caracterizados por meio da densidade aparente, área específica, diâmetro médio de poros, volume de poros, microscopias ótica e eletrônica de varredura, grau de inchamento, espectrometria de infravermelho com transformada de Fourier (FTIR), análise termogravimétrica e análise elementar. Os copolímeros de Sty-DVB foram modificados quimicamente através da reação de nitração, seguida da reação de redução do grupo nitro a amino e posterior reação de diazotação e hidrólise do grupo sal de diazônio. Os copolímeros modificados contendo os grupos NH2 e OH foram utilizados como suporte para a ancoragem das nanopartículas de prata. As partículas de prata foram obtidas pela redução dos íons Ag+ empregando-se cloridrato de hidroxilamina como redutor e PVP como protetor de colóide. O teor de prata impregnada foi determinado pelo método volumétrico. A celulose bacteriana (BC) foi empregada como uma matriz para impregnação de nanopartículas de prata. Membranas de BC foram impregnadas com solução aquosa de AgNO3, a seguir foi realizada a redução dos íons Ag+ com três diferentes agentes redutores (hidrazina, hidroxilamina e ácido ascórbico) empregando ou não protetor de colóide (PVP ou gelatina). As membranas de BC/Ag0 obtidas foram caracterizadas por difração de raios-X, análise termogravimétrica e microscopia eletrônica de varredura. A capacidade bactericida dos copolímeros de Sty-DVB, dos copolímeros funcionalizados e impregnados com prata e das membranas de BC/Ag0 foi avaliada através do método da contagem em placa contra suspensões de Escherichia coli, em diferentes concentrações (103 a 107 células/mL). Foi observado que os copolímeros de origem e os copolímeros modificados contendo os grupos NO2 e NH2 não apresentaram atividade bactericida contra suspensões de E. coli em nenhuma concentração. Por outro lado, os copolímeros modificados contendo o grupo OH apresentaram alguma atividade bactericida, embora abaixo do esperado devido à baixa incorporação de hidroxilas fenólicas. Os copolímeros modificados impregnados com Ag apresentaram maior ação bactericida do que os copolímeros modificados, o que comprova que a ação bactericida é devida às partículas de prata ancoradas nos copolímeros. Os copolímeros modificados contendo o grupo OH impregnados com Ag mesmo possuindo menores teores de prata apresentaram maior ação bactericida do que os copolímeros modificados contendo o grupo NH2 impregnados com Ag. A maior ação bactericida pode ser atribuída à combinação da atividade bactericida das partículas de prata com a atividade dos grupos hidroxilas fenólicas mesmo que estes grupos estejam pouco incorporados nos copolímeros. Os compósitos de BC/Ag0 exibiram atividade bactericida contra E. coli que foi atribuída à ação das nanoparticulas de prata obtidas quando foi empregada a hidroxilamina como agente redutor e a gelatina como protetor de colóide

光致聚合物中单体及粘结剂对全息性能的影响

研究了单体及粘结剂等成份对全息光致聚合物薄膜光存储性能的影响。在相同引发条件下．以丙烯酰胺作为单体时，光聚物的衍射效率明显高于以丙烯酸和N羟甲基丙烯酰胺作为单体时光聚物的衍射效率。向丙烯酰胺中加入少量N-羟甲基丙烯酰胺，可以改善膜表面的光学质量．降低散射光强度，并提高膜的保存时间。在聚乙烯醇膜中单体聚合程度明显优于在聚乙烯吡咯烷酮中的程度，在大分子量的聚乙烯醇中的衍射效率及感光灵敏度高于在小分子量中的衍射效率和感光灵敏度，而且大分子量的聚乙烯醇能够制备厚膜，这是实现全息海量存储的一个重要因素。

Projeto Vidas Paralelas: estudo sobre uma experiência de participação em saúde do trabalhador no Rio de Janeiro

O objeto deste estudo é o Projeto Vidas Pararelas (PVP) no estado do Rio de Janeiro. Possui como objetivo geral estudar a experiência do PVP do Rio de Janeiro à luz dos conceitos da Educação Popular e Saúde (EPS). Como norteador da pesquisa, utilizamos o método qualitativo e para a análise dos dados, utilizamos a análise de conteúdo. O cenário da pesquisa consta de tudo que envolve o PVP, seus integrantes e o ambiente virtual. Antes de apresentarmos os resultados das entrevistas, descrevemos o componente digital do PVP (o site) e o perfil dos sujeitos da pesquisa que foi composta de 11 trabalhadores inseridos no PVP RJ. Categorizamos os achados das entrevistas em quatro tópicos: o primeiro, fala sobre a participação no PVP, onde constatamos que, quanto a participação, os trabalhadores mostraram várias formas de uso do projeto, bem como tipos de participação, com ênfase às falas que esperam que o PVP também forme multiplicadores. Dentre os ganhos para a classe trabalhadora, no segundo tópico, eles citaram a melhoria da cultura de denúncia e a oportunidade de reconhecimento da identidade de gênero de uma classe em especial. Outros trabalhadores consideram o projeto, também, como agente fortalecedor de sua ou de outras categorias profissionais. No terceiro tópico, consideram que, no futuro, o PVP será uma importante ferramenta nas mãos do trabalhador para a exposição de sua realidade de trabalho. Além disso, eles colocam a esperança na melhoria do convívio com o próprio grupo do PVP no Rio de Janeiro. Por fim, no quarto tópico como melhorias, os entrevistados apontam a necessidade de reorganização do coletivo que compõe o PVP RJ. E para que esse convívio se concretize, os trabalhadores cobram que a Rede de Apoio realize mais reuniões. Outro ponto bem enfático na fala dos entrevistados, neste tópico, foi a dificuldade em acessar o site e a dificuldade de acesso à internet. Portanto, neste estudo observamos como a tecnologia da informação, associada a rede mundial de computadores e guiados pela experiência da metodologia da educação popular em saúde, se mostrou uma ferramenta de auxílio para a participação de trabalhadores em um projeto de saúde do trabalhador. No entanto, observamos que lidar com a metodologia a qual o projeto foi calcado trouxe dificuldades para a maturação dele no Rio de Janeiro. Também foi constatado a dificuldade de alguns trabalhadores em lidar com o componente digital do PVP. E, por fim, a reclamação implícita na fala dos trabalhadores em se sentir participante em todas as etapas da constituição do PVP.

A comparison of different failure assessment methodologies applied to the NESC-1 test

Predictions for a 75x205mm surface semi-elliptic defect in the NESC-1 spinning cylinder test have been made using BS PD 6493:1991, the R6 procedure, non-linear cracked body finite element analysis techniques and the local approach to fracture. All the techniques agree in predicting ductile tearing near the inner surface of the cylinder followed by cleavage initiation. However they differ in the amount of ductile tearing, and the exact location and time of any cleavage event. The amount of ductile tearing decreases with increasing sophistication in the analysis, due to the drop in peak crack driving force and more explicit consideration of constraint effects. The local approach predicts a high probability of cleavage in both HAZ and base material after 190s, while the other predictions suggest that cleavage is unlikely in the HAZ due to constraint loss, but likely in the underlying base material. The timing of this event varies from ∼150s for R6 predictions to ∼250-300s using non-linear cracked body analysis.

An investigation into the residual stresses in an aluminium 2024 test weld

This paper uses finite element (FE) analysis to examine the residual stresses generated during the TIG welding of aluminium aerospace alloys. It also looks at whether such an approach could be useful for evaluating the effectiveness of various residual stress control techniques. However, such simulations cannot be founded in a vacuum. They require accurate measurements to refine and validate them. The unique aspect of this work is that two powerful engineering techniques are combined: FE modelling and neutron diffraction. Weld trials were performed and the direct measurement of residual strain made using the ENGIN neutron diffraction strain scanning facility. The predicted results show an excellent agreement with experimental values. Finally this model is used to simulate a weld made using a "Low Stress No Distortion" (LSND) technique. Although the stress reduction predicted is only moderate, the study suggests the approach to be a quick and efficient means of optimising such techniques.