Caracterização físico-mecânica de painéis aglomerados de Eucalyptus grandis com adição de resíduos industriais madeireiros

Pós-graduação em Ciência Florestal - FCA

A História: fonte de fato ou de ficção?

A partir de dados tomados a duas narrativas portuguesas contemporâneas - a História do Cerco de Lisboa (1989), de José Saramago, e a Crónica do Cruzado Osb. (1976), de Agustina Bessa-Luís - investiga-se, neste estudo, a forma de aproveitamento, que neles se dá, da fonte histórica (o relato medieval do Cruzado Osberno), tendo o objetivo de, pela observação desta forma de relação entre o texto histórico e o texto literário, discutir questões mais amplas, concernentes aos imbricamentos de fato e ficção.Palavras-chave: Narrativa portuguesa contemporânea; história e ficção; ironia.

Análise do comportamento térmico de paredes de madeira

This study consists in the observation and evaluation of the thermal behavior and distribution of wood composite walls, MDF – Medium Density Fiberboard, HDF – High Density Fiberboard, OSB – Oriented Strand Board and EGP – Edge Glued Panel. This study had the objective to present the experimental thermal behavior and to verify which one fit the thermal comfort standards for human labor For this work, was developed a thermal chamber, with one interchangeable side, so the wall prototypes would fit for each experiment. We studied walls made of MDF, HDF, OSB and EGP, which one had its own distinct behavior due to the panel construction. The EGP wall had shown the most reliable material for this usage at high temperatures. With this work, it was demonstrated the importance of choice for the right material and construction method for wooden composite walls, because if they were scaled poorly, the people exposed to them would be uncomfortable by the proportionate environment, and the costs for a resizing would be too high

Aproveitamento de resíduos de laminação da madeira para a produção de painel estrutural

Products derived from wood or engineered products are becoming interesting alternatives to the replacement of solid wood in various applications, from structural components to the furniture industry and packaging. Among these products, there are panels built by strands, particles and fibers, each one having their particular characteristics and potential of use. Since the different types of panels are produced, waste generation is part of the process, and that more technological it is, it still generates losses of raw materials. Based on the need for rational use of raw materials and using almost full of industrially processed wood, It arises the proposal of this work, which seeks to use waste from the lamination, like pieces of strands, broken strands, strands rough, cracked strands to produce panels with structural characteristics of the OSL panel (Oriented Strand Lumber), LSL (Laminated Strand Lumber) and OSB (Oriented Strand Lumber). Besides the use of waste, this paper seeks an alternative to the use of the adhesive, because the industry uses formaldehyde-based adhesives, which over the press, they emit large amounts of formaldehyde, which is very aggressive to humans and environment. The panels made with polyurethane resin based on castor oil and hot-pressed were characterized by physical and mechanical tests according to specifications of European Standard (EN). High values of tensile strength, elastic modulus and density were found in the results of tests. Adding to stable values of swelling and moisture content, the panel studied adds attractive features to the panel market, especially in the civil construction

Aproveitamento de resíduos na composição de painel sarrafeado amarrado: um estudo econômico

The manufacture of plywood panel already has about eighty years in Brazil. In general, plywood panels differ by their nature, composition and manufacturing; the most common MDF, OSB, particle and the joist. Some of these products can be generated fromindustrial waste, as the panelblockboard, you can use in their training waste destop boards (Battens), from industrial processes or processing of primary wood. This work aims to present the detailed study of the economic viability of utilization of industrial solid waste timber through the acquisition of a machine amarradeira of joists in a wood processing unit in city Itapeva-SP. We studied the application of wastein the composition of kernels blockboard panel tied its commercial acceptance and future prospects market. We noticed great economic advantage in investing in the study, compared with the transformation process of the joists in biomass energy, although the investment decision involves not only financial matters but also the acceptance market the product to be manufactured

Estudo de caso do conforto térmico de dois modelos construtivos em madeira: wood frame e log home

O presente trabalho consiste em demonstrar valores referentes ao conforto ambiental de dois modelos construtivos, sendo o primeiro um edifício já executado e o outro em fase de implantação, ambos no Campus Experimental de Itapeva, aplicando alguns conceitos em habitação mais sustentáveis de madeira na região de Itapeva, estado de São Paulo, Brasil. A edificação construída sedia duas salas de aula a partir da tipologia construtiva wood frame, constituída basicamente de paredes autoportantes compostas de ossatura de madeira tratada de pinus.sp, chapas estruturais em OSB, manta de isolamento térmico/acústico e fechamento interno e externo, respectivamente em gesso e sidding (lambris de madeira). A habitação em fase de início de implantação foi idealizada a partir da tipologia construtiva log-home, e atenderá a necessidade de espaço físico para abrigar o Centro Acadêmico e a empresa-júnior “PROMAD”, ambos do curso de Engenharia Industrial Madeireira do Campus Experimental da UNESP/Itapeva. Esta construção foi elaborada a partir de técnicas de baixo impacto ambiental, levando em consideração os resultados de análise térmica obtidos na edificação anterior. Em ambos modelos construtivos foram empregados recursos renováveis abundantes na região, como a madeira de reflorestamento de Pinus e de Eucalipto. Foi acrescentado ainda ao segundo modelo a utilização de resíduos industriais lignocelulósicos, como rolete de laminação e outros materiais locais disponíveis. A metodologia básica empregada para a obtenção de dados sobre o conforto térmico em relação as edificações foi, para o primeiro caso, a coleta de dados de temperatura e umidade utilizando um termo-higrômetro, a sistematização e análise de dados reais obtidos no interior da edificação. No segundo caso, o dimensionamento do conforto térmico... (Resumo completo, clicar acesso eletrônico abaixo)

Metabolite profiles of essential oils in citrus peels and their taxonomic implications

China is an important center of origin for the genus Citrus L. of the family Rutaceae and is rich in wild Citrus species. The taxonomy of Citrus has been a subject of controversy for more than a half century. We propose that the metabolite profiles of Chinese native Citrus species can be used for classification and understanding of the taxonomic relationships within the Citrus germplasm. In this study, triplicate gas chromatography-mass spectrometry (GC-MS) metabolite profiles of 20 Citrus species/varieties were acquired, including 10 native varieties originating in China. R-(+)-limonene, alpha-pinene, sabinene and alpha-terpinene were found to be major characteristic components of the essential oils analyzed in this study, and these compounds contributed greatly to the metabolic classification. The three basic species of the subgenus Eucitrus (Swingle's system), i.e., C. reticulata Blanco, C. medica L. and C. grandis Osb., were clearly differentiated based upon their metabolite profiles using hierarchical cluster analysis (HCA) and partial least square-discriminant analysis (PLS-DA). All the presumed hybrid genotypes, including sweet orange (C. sinensis Osb.), sour orange (C. aurantium L.), lemon (C. limon Burm.f.), rough lemon (C. jambhiri Lush.), rangpur lime (C. limonia Osb.) and grapefruit (C. paradisi Macf.), were grouped closely together with one of their suggested parent species in the HCA-dendrogram and the PLS-DA score plot. These results clearly demonstrated that the metabolite profiles of Citrus species could be utilized for the taxonomic classification of the genus and are complementary to the existing taxonomic evidence, especially for the identification and differentiation of hybrid species.

Genetic transformation of Citrus sinensis with Citrus tristeza virus (CTV) derived sequences and reaction of transgenic lines to CTV infection

Transgenic Citrus sinensis (L.) Osb. plants, cvs. Valencia and Hamlin, expressing Citrus tristeza virus (CTV) derived sequences were obtained by genetic transformation. The gene constructs were pCTV-CP containing the 25 kDa major capsid protein gene (CTV-CP), pCTV-dsCP containing the same CTV-CP gene in an intron-spliced hairpin construct, and pCTV-CS containing a 559 nt conserved region of the CTV genome. The transgenic lines were identified by PCR and the transgene integration was confirmed by Southern blot. Transgene mRNA could be detected in most transgenic lines containing pCTV-CP or pCTV-CS transgene. The mRNA of pCTV-dsCP transgene was almost undetectable, with very light bands in most analyzed plants. The transgene transcription appears to be closely linked to the type of gene construct. The virus challenge assays reveals that all transgenic lines were infected. However, it was possible to identify propagated clones of transgenic plants of both cultivars studied with a low virus titer, with values similar to the non-inoculated plants (negative control). These results suggested that the transgenic plants present some level of resistance to virus replication. The higher number of clones with low virus titer and where mRNA could not be detected or was presented in a very light band was found for pCTV-dsCP-derived transgenic lines.

Fastener-Based Computational Models of Cold-Formed Steel Shear Walls

Cold-formed steel (CFS) combined with wood sheathing, such as oriented strand board (OSB), forms shear walls that can provide lateral resistance to seismic forces. The ability to accurately predict building deformations in damaged states under seismic excitations is a must for modern performance-based seismic design. However, few static or dynamic tests have been conducted on the non-linear behavior of CFS shear walls. Thus, the purpose of this research work is to provide and demonstrate a fastener-based computational model of CFS wall models that incorporates essential nonlinearities that may eventually lead to improvement of the current seismic design requirements. The approach is based on the understanding that complex interaction of the fasteners with the sheathing is an important factor in the non-linear behavior of the shear wall. The computational model consists of beam-column elements for the CFS framing and a rigid diaphragm for the sheathing. The framing and sheathing are connected with non-linear zero-length fastener elements to capture the OSB sheathing damage surrounding the fastener area. Employing computational programs such as OpenSees and MATLAB, 4 ft. x 9 ft., 8 ft. x 9 ft. and 12 ft. x 9 ft. shear wall models are created, and monotonic lateral forces are applied to the computer models. The output data are then compared and analyzed with the available results of physical testing. The results indicate that the OpenSees model can accurately capture the initial stiffness, strength and non-linear behavior of the shear walls.

Corrugated wood composite panels for structural decking

High flexural strength and stiffness can be achieved by forming a thin panel into a wave shape perpendicular to the bending direction. The use of corrugated shapes to gain flexural strength and stiffness is common in metal and reinforced plastic products. However, there is no commercial production of corrugated wood composite panels. This research focuses on the application of corrugated shapes to wood strand composite panels. Beam theory, classical plate theory and finite element models were used to analyze the bending behavior of corrugated panels. The most promising shallow corrugated panel configuration was identified based on structural performance and compatibility with construction practices. The corrugation profile selected has a wavelength equal to 8”, a channel depth equal to ¾”, a sidewall angle equal to 45 degrees and a panel thickness equal to 3/8”. 16”x16” panels were produced using random mats and 3-layer aligned mats with surface flakes parallel to the channels. Strong axis and weak axis bending tests were conducted. The test results indicate that flake orientation has little effect on the strong axis bending stiffness. The 3/8” thick random mat corrugated panels exhibit bending stiffness (400,000 lbs-in2/ft) and bending strength (3,000 in-lbs/ft) higher than 23/32” or 3/4” thick APA Rated Sturd-I-Floor with a 24” o.c. span rating. Shear and bearing test results show that the corrugated panel can withstand more than 50 psf of uniform load at 48” joist spacings. Molding trials on 16”x16” panels provided data for full size panel production. Full size 4’x8’ shallow corrugated panels were produced with only minor changes to the current oriented strandboard manufacturing process. Panel testing was done to simulate floor loading during construction, without a top underlayment layer, and during occupancy, with an underlayment over the panel to form a composite deck. Flexural tests were performed in single-span and two-span bending with line loads applied at mid-span. The average strong axis bending stiffness and bending strength of the full size corrugated panels (without the underlayment) were over 400,000 lbs-in2/ft and 3,000 in-lbs/ft, respectively. The composite deck system, which consisted of an OSB sheathing (15/32” thick) nailed-glued (using 3d ringshank nails and AFG-01 subfloor adhesive) to the corrugated subfloor achieved about 60% of the full composite stiffness resulting in about 3 times the bending stiffness of the corrugated subfloor (1,250,000 lbs-in2/ft). Based on the LRFD design criteria, the corrugated composite floor system can carry 40 psf of unfactored uniform loads, limited by the L/480 deflection limit state, at 48” joist spacings. Four 10-ft long composite T-beam specimens were built and tested for the composite action and the load sharing between a 24” wide corrugated deck system and the supporting I-joist. The average bending stiffness of the composite T-beam was 1.6 times higher than the bending stiffness of the I-joist. A 8-ft x 12-ft mock up floor was built to evaluate construction procedures. The assembly of the composite floor system is relatively simple. The corrugated composite floor system might be able to offset the cheaper labor costs of the single-layer Sturd-IFloor through the material savings. However, no conclusive result can be drawn, in terms of the construction costs, at this point without an in depth cost analysis of the two systems. The shallow corrugated composite floor system might be a potential alternative to the Sturd-I-Floor in the near future because of the excellent flexural stiffness provided.

Penestragania apicalis (Osborn & Ball,1898),another invasive Nearctic leafhopper found in Europe

In 2010 the Nearctic leafhopper Penestragania apicalis (Osb.& Ball) was found for the first time in Europe. Altogether there are now 16 known localities in France, Switzerland, Germany and Austria indicating that the species is well established for a rather long period and more widespread in Europe and perhaps worldwide. As in North America it lives on honeylocust (Gleditsia triacanthos L.), overwinters in the egg stage and probably has one or two generations a year, with adults at least from late June until early October. It is yet unclear if it causes relevant damage to the host plant in Europe.

In situ acoustic methods to estimate the physical and mechanical aging of oriented strand board

Following the success achieved in previous research projects usin non-destructive methods to estimate the physical and mechanical aging of particle and fibre boards, this paper studies the relationships between aging, physical and mechanical changes, using non-destructive measurements of oriented strand board (OSB). 184 pieces of OSB board from a French source were tested to analyze its actual physical and mechanical properties. The same properties were estimated using acoustic non-destructive methods (ultrasound and stress wave velocity) during a physical laboratory aging test. Measurements were recorded of propagation wave velocity with the sensors aligned, edge to edge, and forming an angle of 45 degrees, with both sensors on the same face of the board. This is because aligned measures are not possible on site. The velocity results are always higher in 45 degree measurements. Given the results of statistical analysis, it can be concluded that there is a strong relationship between acoustic measurements and the decline in physical and mechanical properties of the panels due to aging. The authors propose several models to estimate the physical and mechanical properties of board, as well as their degree of aging. The best results are obtained using ultrasound, although the difference in comparison with the stress wave method is not very significant. A reliable prediction of the degree of deterioration (aging) of board is presented.

Productos derivados de la madera

Se analizan las características físicas, mecánicas, la patología y los usos de los productos derivados de la madera o compuestos, que tienen día a día mayor utilización por la industria de segunda transformación y usuarios finales, dada la versatilidad que tiene cada uno de estos productos. Los productos que se analizan son los siguientes: Vigas dúo, trío y perfiles laminados Madera laminada Madera microlaminada LVL Paralam PSL Madera tratada con productos protectores insecticida; fungicidas; ignifigos o/y protec6ores de la luz Madera acetilada Madera furfurylada Madera termotratada Composites Tableros alistonados Tableros contrachapados Tableros de partículas Tableros de fibras Tableros OSB Tableros de partículas cemento Tableros de viruta cemento Tableros atamborados Tableros ligeros

Productos derivados de la madera

Se analizan las características físicas, mecánicas, la patología y los usos de los productos derivados de la madera o compuestos, que tienen día a día mayor utilización por la industria de segunda transformación y usuarios finales, dada la versatilidad que tiene cada uno de estos productos. Los productos que se analizan son los siguientes: Vigas dúo, trío y perfiles laminados Madera laminada Madera microlaminada LVL Paralam PSL Madera tratada con productos protectores insecticida; fungicidas; ignifigos o/y protec6ores de la luz Madera acetilada Madera furfurylada Madera termotratada Madera densificada Composites Tableros alistonados Tableros contrachapados Tableros de partículas Tableros de fibras Tableros OSB Tableros de partículas cemento Tableros de viruta cemento Tableros atamborados Tableros ligeros

Calidad ambiental electromagnética : atenuación de las radiaciones electromagnéticas en los espacios habitados

La perspectiva del arquitecto en calidad ambiental, y salud en un contexto sostenible, se amplía al considerar las radiaciones electromagnéticas no ionizantes en el diseño arquitectónico. En ese sentido, además del confort higrotérmico, acústico, lumínico y de la calidad del aire, se podría considerar el confort electromagnético de un lugar. Dado que existe gran controversia en cuales han de ser los límites de exposición a radiaciones electromagnéticas no ionizantes, establezco como punto de referencia los valores límite más restrictivos, que son los recomendados por la norma SBM-2008, desarrollada por el Institut für Baubiologie & Oekologie Neubeuern (IBN)1. Se plantean como hipótesis que podemos modificar el entorno electromagnético con materiales de construcción y geometría; y que determinados trazados geométricos tienen la capacidad de reducir el impacto de los campos electromagnéticos sobre los organismos vivos. El objetivo consiste en demostrar experimentalmente que podemos trabajar sobre la calidad ambiental electromagnética de un espacio, a través de la elección de materiales de construcción y trazados geométricos, intentando demostrar que existe una relación causa - efecto entre ambos. La metodología plantea tres aproximaciones experimentales, cada una con un tipo de radiación electromagnética, pues se pretende abarcar las situaciones que comúnmente se pueden presentar en un entorno habitado, ya sea urbano o rural. La primera aproximación trata sobre las alteraciones del campo geomagnético natural (nT / m) provocadas por los materiales de construcción. Utilizo el geomagnetómetro BPM 2010, para realizar un ensayo con cuatro tipos de materiales de distinta procedencia: origen vegetal muy poco procesado (corcho aglomerado negro) y más procesado (OSB), origen derivado del petróleo (tablero rígido de poliuretano) y de origen mineral metálico (chapa minionda). De la lectura de los datos se observa relación causa-efecto entre los materiales de construcción estudiados y las modificaciones que pueden ejercer sobre el campo magnético de un lugar. A continuación se estudia el entorno de radiación electromagnética artificial a baja frecuencia (3 Hz a 3 kHz) y a alta frecuencia, (800 MHz a 10 GHz) en vivienda y en oficina utilizando unas geometrías concretas: las tarjetas de corrección de radiaciones. Estas tarjetas se ubican en paramentos verticales y horizontales de un espacio sometido a radiación propia de un entorno urbano. Se concluye que en una habitación inciden múltiples variables simultáneas muy difíciles de trabajar por separado y que aparentemente no se pueden identificar cambios significativos en las mediciones con y sin las tarjetas de corrección de radiaciones. A continuación estudio el entorno de radiación electromagnética artificial a baja frecuencia asociada a la red de distribución eléctrica. Para poder ver cómo este entorno electromagnético lo podemos modificar, utilizo las tarjetas de corrección de radiaciones ubicadas en relación directa con organismos vivos, por un lado germinados de semillas de haba mungo sometidas a campos electromagnéticos complejos a alta y baja frecuencia, propios de una oficina; y por otro lado germinados de semillas de haba mungo, sometidas a campos electromagnéticos puros a 50 Hz, sin influencias de radiación a alta frecuencia. Se concluye que se observa relación causa - efecto entre los trazados geométricos estudiados y su capacidad para reducir el impacto de los campos electromagnéticos a altas y bajas frecuencias sobre las semillas de haba mungo. También utilizo las tarjetas de corrección de radiaciones en un ensayo normalizado en el laboratorio de bioelectromagnetismo del Hospital Universitario Ramón y Cajal, con células de neuroblastoma humano. Se concluye que se observa relación causa - efecto entre los trazados geométricos estudiados y su capacidad para reducir el impacto de los campos electromagnéticos de 50 Hz Y 100 μT sobre células de neuroblastoma humano y además disminuyen la velocidad de proliferación celular respecto del grupo de células de control. Finalmente se estudia el entorno de radiación electromagnética artificial a alta frecuencia, asociado a comunicaciones inalámbricas. Para ello realizo simulaciones con el software CST Studio, sobre las tarjetas de corrección de radiaciones a alta frecuencia. A la luz de los datos se observa relación causa - efecto entre el trazado geométrico estudiado y su capacidad para reducir radiaciones electromagnéticas de alta frecuencia. Se comprueba además que, las tarjetas de corrección de radiaciones disminuyen la intensidad de la radiación acercándose a los límites de exposición establecidos por el instituto de la biología de la construcción alemán, que podrían estar señalando los estándares de biocompatibilidad. ABSTRACT The perspective of the architect in environmental quality, and health in a sustainable context is extended to consider non-ionizing electromagnetic radiation in architectural design. In that sense, besides the hygrothermal, acoustic, lighting and air quality comfort, the electromagnetic comfort of an indoor space could be considered. There is still great controversy about which should be the limits of exposure to nonionizing electromagnetic radiation, as a benchmark, the more restrictive limits are considered, by the SBM- 2008 standard, developed by the Institut für Baubiologie & Oekologie Neubeuern (IBN). The hypotheses that arise are the following: the electromagnetic environment can be modified by using certain construction materials and geometry; and certain geometric design have the ability to reduce the impact of electromagnetic fields on living organisms. The aim is to demonstrate experimentally that we can work on electromagnetic environmental quality of a indoor space, by using certain construction materials and geometric design, trying to demonstrate a cause - effect relationship between them. The methodology raises three experimental approaches, each with a type of radiation, it is intend to cover situations commonly may occur in an inhabited environment, whether urban or rural. The first approach discusses the alteration of the natural magnetic field (nT / m) caused by the building materials. Geomagnetometre BPM 2010 is used for conducting a test with four types of materials from different sources: vegetable origin less processing (black agglomerate cork) and vegetable origin more processed (OSB), petroleum origin (rigid polyurethane board) and metallic origin (miniwave plate). It is observed across the data information that exist cause-effect relationship between the construction materials studied and the modifications that they can exercise on the magnetic field of a place. Then I study the environment of artificial electromagnetic radiation at low frequency (3 Hz to 3 kHz) and high frequency (800 MHz to 10 GHz) in housing and office, using some specific geometries: correcting radiation cards. These cards are placed in vertical and horizontal surfaces of an indoor space concerned by radiation. I conclude that an indoor space is affected by multiple simultaneous variables difficult to work separately and apparently it is not possible identify significant changes in measurements with and without correcting radiation cards. Then the artificial electromagnetic environment of low-frequency radiation associated with the electricity distribution network is studied. To see how the electromagnetic environment can be changed, correcting radiation cards are placed directly related to living organisms. On one hand, mung bean seeds subject to complex electromagnetic fields at low and high frequency, typical of an office; and on the other hand mung bean seeds, subjected to pure electromagnetic fields at 50 Hz, no influenced by high frequency radiation. It is observed that exist cause-effect relationship between the geometric design and their ability to reduce the impact of electromagnetic fields at high and low frequencies that arrives on on mung bean seeds. The correcting radiation cards were also used in a standard test in the bioelectromagnetics laboratory of Ramón y Cajal University Hospital, on human neuroblastoma cells. It is observed that exist cause-effect relationship between the geometric design and their ability to reduce the impact of electromagnetic fields at 50 Hz and 100 μT on human neuroblastoma cells and also decrease the rate of cell proliferation compared to the group of cells control. Finally the artificial electromagnetic radiation environment at high frequency associated with wireless communications was studied. Simulations with CST Study software were made to determine the behavior of correcting radiation cards in high-frequency. It is observed across the data information that exist causeeffect relationship between the geometric design and the ability to reduce the levels of high-frequency electromagnetic radiation. It also checks that radiation correcting cards decrease the intensity of radiation approaching exposure limits established by Institut für Baubiologie & Oekologie Neubeuern (IBN), which could be signaling biocompatibility standards.