On the mass flow rate from silos with lateral exit holes

The mass flow rate, (m) over dot, associated with the lateral outflow of dry, cohesionless granular material through circular orifices of diameter D made in vertical walls of silos was measured experimentally in order to determine also the influence of the wall thickness of the silo, w. Geometrical arguments, based on the outflow happening, are given in order to have a general correlation for (m) over dot embracing both quantities, D and w. The angle of repose appears to be an important characterization factor in these kinds of flows.

Can Superflares Occur on Our Sun?

Recent observations of Sun-like stars, similar to our Sun in their surface temperature (5600-6000 K) and slow rotation (rotational period > 10 d), using the Kepler satellite by Maehara et al. (2012, Nature, 485, 478) have revealed the existence of superflares (with energy of 10(33)-10(35) erg). From statistical analyses of these superflares, it was found that superflares with energy of 10(34) erg occur once in 800 yr, and superflares with 10(35) erg occur once in 5000 yr. In this paper, we examine whether superflares with energy of 10(33)-10(35) erg could occur on the present Sun through the use of simple order-of-magnitude estimates based on current ideas related to the mechanisms of the solar dynamo. If magnetic flux is generated by differential rotation at the base of the convection zone, as assumed in typical dynamo models, it is possible that the present Sun would generate a large sunspot with a total magnetic flux of similar to 2 x 10(23) Mx (= G cm(2)) within one solar cycle period, and lead to superflares with an energy of 10(34) erg. To store a total magnetic flux of similar to 10(24) Mx, necessary for generating 10(35) erg superflares, it would take similar to 40 yr. Hot Jupiters have often been argued to be a necessary ingredient for the generation of superflares, but we found that they do not play any essential role in the generation of magnetic flux in the star itself, if we consider only the magnetic interaction between the star and the hot Jupiter. This seems to be consistent with Maehara et al.'s finding of 148 superflare-generating solar-type stars that do not have a hot Jupiter-like companion. Altogether, our simple calculations, combined with Maehara et al.'s analysis of superflares on Sun-like stars, show that there is a possibility that superflares of 10(34) erg would occur once in 800 yr on our present Sun.

Novel procedure for the estimation of swelling pressures of compacted bentonites based on diffuse double layer theory

Bentonite clays are proven to be attractive as buffer and backfill material in high-level nuclear waste repositories around the world. A quick estimation of swelling pressures of the compacted bentonites for different clay-water-electrolyte interactions is essential in the design of buffer and backfill materials. The theoretical studies on the swelling behavior of bentonites are based on diffuse double layer (DDL) theory. To establish theoretical relationship between void ratio and swelling pressure (e versus P), evaluation of elliptic integral and inverse analysis are unavoidable. In this paper, a novel procedure is presented to establish theoretical relationship of e versus P based on the Gouy-Chapman method. The proposed procedure establishes a unique relationship between electric potentials of interacting and non-interacting diffuse clay-water-electrolyte systems. A procedure is, thus, proposed to deduce the relation between swelling pressures and void ratio from the established relation between electric potentials. This approach is simple and alleviates the need for elliptic integral evaluation and also the inverse analysis. Further, application of the proposed approach to estimate swelling pressures of four compacted bentonites, for example, MX 80, Febex, Montigel and Kunigel V1, at different dry densities, shows that the method is very simple and predicts solutions with very good accuracy. Moreover, the proposed procedure provides continuous distributions of e versus P and thus it is computationally efficient when compared with the existing techniques.

Hydro-mechanical characterization of Barmer 1 bentonite from Rajasthan, India

The conceptual model for deep geological disposal of high level nuclear waste (HLW) is based on multiple barrier system consisting of natural and engineered barriers. Buffer/backfill material is regarded as the most important engineered barrier in HLW repositories. Due to large swelling ability, cation adsorption capacity, and low permeability bentonite is considered as suitable buffer material in HLW repositories. Japan has identified Kunigel VI bentonite, South Korea - Kyungju bentonite, China - GMZ bentonite, Belgium - FoCa clay, Sweden - MX-80 bentonite, Spain - FEBEX bentonite and Canada - Avonseal bentonite as candidate bentonite buffer for deep geological repository program. An earlier study on Indian bentonites by one of the authors suggested that bentonite from Barmer district of Rajasthan (termed Barmer 1 bentonite), India is suited for use as buffer material in deep geological repositories. However, the hydro-mechanical properties of the Barmer 1 bentonite are unavailable. This paper characterizes Barmer 1 bentonite for hydro-mechanical properties, such as, swell pressure, saturated permeability, soil water characteristic curve (SWCC) and unconfined compression strength at different dry densities. The properties of Barmer 1 bentonite were compared with bentonite buffers reported in literature and equations for designing swell pressure and saturated permeability coefficient of bentonite buffers were arrived at. (C) 2013 Elsevier B.V. All rights reserved.

Structural Evolution and Property Changes in Nd_{60}Al_{10}Fe_{20}Co_{10} Bulk Metallic Glass During Crystallization

The structural evolution and property changes in Nd60Al10Fe20Co10 bulk metallic glass (BMG) upon crystallization are investigated by the ultrasonic method, x-ray diffraction, density measurement, and differential scanning calorimetry. The elastic constants and Debye temperature of the BMG are obtained as a function of annealing temperature. Anomalous changes in ultrasonic velocities, elastic constants, and density are observed between 600–750 K, corresponding to the formation of metastable phases as an intermediate product in the crystallization process. The changes in acoustic velocities, elastic constants, density, and Debye temperature of the BMG relative to its fully crystallized state are much smaller, compared with those of other known BMGs, the differences being attributed to the microstructural feature of the BMG.

Microstructure and Magnetic Properties of Nd60Al10Fe20Co10 Glass-forming Alloy

The microstructural variations of the Nd60Al10Fe20CO10 melt-spun ribbons and the as-cast rod were studied by high resolution transmission electron microscopy (HRTEM), x-ray diffraction (XRD) and differential scanning calorimetry. Nano-clusters in glassy m

Domain structure of hard magnetic NdAlFeCo bulk metallic glass

Magnetic domain structure of hard magnetic Nd60Al10Fe20Co10 bulk metallic glass (BMG) has been studied by using magnetic force microscopy. In the magnetic force images it is shown that the exchange interaction type magnetic domains with a period of about 360 nm do exist in the BMG, which is believed to be associated with the appearance of hard-magnetic properties in this system. As the scale of the magnetic domain is much larger than the size of the short-range ordered atomic clusters existing in the BMG, it is believed that the large areas of magnetic contrast are actually a collection of a group of clusters aligned in parallel by strong exchange coupling interaction. After fully crystallization, the BMG exhibits paramagnetism. No obvious magnetic contrast is observed in the magnetic force images of fully crystallized samples, except for a small quantity of ferromagnetic crystalline phase with low coercivity and an average size of 900 nm.

Stability of ZrTiCuNiBe Bulk Metallic Glass Upon Isothermal Annealing Near the Glass Transition Temperature

The stability of Zr41Ti14Cu12.5Ni10Be22.5 bulk metallic glass (BMG) upon isothermal annealing near the glass transition temperature has been investigated by using x-ray diffraction, differential scanning calorimetry, and the pulse echo overlap method. The density, elastic constants, and thermodynamic parameters as well as their annealing time dependence have been determined. The microstructural and properties changes of the annealed BMG were checked by acoustic measurement. Obvious structural and property changes were observed with prolonged annealing of the BMG near the glass transition temperature.

Comportamiento agro-industrial de catorce variedades de caña de azúcar (Saccharum sp hibrido L.) en comparación con las variedades Ja 60-5 y C 87-51

El presente trabajo se llevó a cabo en el ciclo 92-93 en el Ingenio Victoria de Julio, donde se evaluaron 14 variedades de caña de azúcar en comparación con las variedades Ja 60 - 5 y C 87 - 51 para determinar el comportamiento agro-industrial de estos cultivares y seleccionar los genotipos más sobresalientes. El experimento fue establecido el 25 de enero de 1992, en un suelo arcilloso de la serie Chilamatillo, la cosecha se realizó a los 11 meses de edad del cultivo, el 16 de Dic 1992. El diseño utilizado fue de bloques completos al azar con 5 repeticiones, las variables estudiadas fueron: Germinación, población, altura de tallos, floración, diámetro de tallos, peso promedio de los tallos, rendimiento agrícola, rendimiento industrial y rendimiento agro-industrial. Los datos fueron sometidos a un análisis de varianza y prueba de tukey al 5% de margen de error. Los resultados obtenidos fueron los siguientes: Germinación; siendo las mejores RB 73-1012, CP 70-321 y Q 96. Población;las mejores numéricamente resultaron Méx 68-P 23,SP 70-1284 y SP 72-4790. Longitud de tallo; las mejores variedades fueron la SP 72-4790, Q 96, RB 73-1012 y RB 73-5220. Diámetro de los tallos; obtuvo el mejor resultado la variedad Méx 69-420 y en segundo lugar la Ja 60-5. Peso promedio de 100 tallos. ; presentando el mejor resultado el cultivar Méx 69-420 seguido de la RB 73-5220. Floración; todas las variedades florecieron a excepción del testigo C 87-51. Rendimiento agrícola; obtuvo el mejor resultado la variedad Méx 68-P 23 ocupando el segundo lugar SP 72-4790; Rendimiento industrial; entre las variedades sobresalieron numéricamente la Q 96 seguido de la C 87-51 y la CP 72-1210. Rendimiento Agro-Industrial; de acuerdo a los resultados de rangos múltiples la variedad Q 96 presenta un rendimiento estadísticamente superior a la variedad testigo Ja 60-5, superando numéricamente al resto de variedades. Las variedades que presentaron afectaciones por enfermedades fueron : RB 76-5288, SP 70-1284, SP 72-4790, CP 72-1210, SP 71-61801 CP 72-2086, Méx 69-420, Méx 68-P23, Ja 60-5 y e 87-51.

Evaluación de semilla sexual hibrida de papa (Solanum tuberosum L.) provenientes del Centro Internacional de la Papa e India en la zona de Miraflor, Esteli

Con el objetivo de seleccionar progenies promisorias de semilla sexual de papa, procedentes del CIP (11) y Programa de la India (3) se estableció este ensayo el 21 de septiembre de 1994, utilizando un diseño de Bloques Completos al Azar (BCA) con cuatro repeticiones, en la estación experimental del Instituto Nicaragüense de Tecnología Agropecuaria (INTA-RB-3), ubicada a 1 350 msnm, humedad relativa del 91 por ciento, temperatura promedio mínima 15 °C/máx 26 °C, cuyos suelos son de textura franca bien drenada, medianamente profundo a profundo, con una precipitación durante el ensayo de 622 mm. Los resultados obtenidos muestran que todas las progenies híbridas enviadas por el CIP mostraron buena velocidad de emergencia en especial SERRANA x LT-7, con respecto a los lubridos de la India. En general el porcentaje de sobrevivencia fue mayor del 80 por ciento para la mayoría de las progenies el cual es un índice aceptable, a excepción de 104.12 LB x TS-4.En la altura final de la planta no hubieron diferencias significativas entre híbridos, solo fueron superiores a KATADIN x TS-10. En cuanto al rendimiento, la progenie HPS­ II/67 mostró ser superior a las demás con 6.2 kg/m2. El número total de tubérculos por metro cuadrado {740) y tubérculos por planta (7) fue superior en la progenie TS-6 x TPS-67. Las progenies de ambos programas mostraron rendimientos por metro cuadrado de más del 50 por ciento con tubérculos mayores de 5 gramos. No se presentó incidencia de virus para ambas progenies, las tres progenies provenientes del Programa de la India presentaron mayor resistencia a tizón tardío (Phytophthora infestans, Mont. D.bary).

Domain structure of a Nd60Al10Fe20Co10 bulk metallic glass

Magnetic domain structure of Nd60Al10Fe20Co10 bulk metallic glass (BMG) has been studied by using magnetic-force microscopy. In the magnetic-force images it is shown that the exchange-interaction-type magnetic domains with a period of about 360 nm do exist in the BMG, which is believed to be associated with the appearance of hard-magnetic properties in this system. The existence of the large-scale domains demonstrates that the magnetic moments of a great deal of short-scale ordered atomic clusters in the BMG have been aligned by exchange coupling. Annealing at 715 K leads to partial crystallization of the BMG. However, the exchange coupling is stronger in the annealed sample, which is considered to arise from the increase of transition-metal concentration in the amorphous phase due to the precipitation of Nd crystalline phase.

Glass Transition and Thermal Stability of Hard Magnetic Bulk NdAlFeCo Metallic Glass

Glass transition and thermal stability of bulk Nd60Al10Fe20Co10 metallic glass were investigated by means of dynamic mechanical thermal analysis (DMTA), differential scanning calorimetry (DSC), X-ray diffraction (XRD) and scanning electronic microscopy (SEM). The glass transition temperature, not revealed by DSC, is alternatively determined by DMTA via storage modulus E' and loss modulus E" measurement to be 498 K at a heating rate of 0.167 K s (-1). The calculated reduced glass transition temperature (T-g/T-m) is 0.63. The large value of T-g/T-m of this alloy is consistent with its good glass-forming ability. The crystallization process of the metallic glass is concluded as follows: amorphous --> amorphous + metastable FeNdAl phase --> amorphous + primary delta-FeNdAl phase --> primary delta-phase + eutectic delta-phase + Nd3Al + Nd3Co. The appearance of hard magnetism in this alloy is ascribed to the presence of amorphous phase with highly relaxed structure. The hard magnetism disappeared after the eutectic crystallization of the amorphous phase. (C) 2002 Elsevier Science B.V. All rights reserved.

Métodos cuantitativos versus métodos cualitativos en la economía de los Negocios. ¿Es una metodología reconciliable?

Changes in the organizational environment over the last three decades have increasingly led to traditional theories being called into question, by stimulating the search for new models suited to the new realities of business economics, generating a crisis or scientific revolution that may result in the appearance of a new paradigm. The positivism-phenomenology duality provokes an “epistemological crisis” in research in management sciences. But the existence of both approaches does not imply the election of one scientific orientation in frontal opposition to the other. From these two conceptions of research procedure, the methods applied can be classed into groups, quantitative and qualitative. The quantitative methodologies places great confidence in the ability of data and measurement to represent opinions or concepts, while qualitative methodologies focus on words and relations to describe a reality or situation. While the diversity of methods contribute to its development and indicates the maturity of an area, the methods must be suitably implemented to obtain significant, valid results. The methodology to be used is not going to depend solely on the type of study or the reality under examination, but also on the stage the research process has reached.

Physical Modeling And Parametric Study On Two-Degree-Of-Freedom Viv Of A Cylinder Near Rigid Wall

Unlike most previous studies on the transverse vortex-induced vibration(VIV) of a cylinder mainly under the wallfree condition (Williamson & Govardhan,2004),this paper experimentally investigates the vortex-induced vibration of a cylinder with two degrees of freedom near a rigid wall exposed to steady flow.The amplitude and frequency responses of the cylinder are discussed.The lee wake flow patterns of the cylinder undergoing VIV were visualized by employing the hydrogen bubble technique.The effects of the gap-to-diameter ratio (e0/D) and the mass ratio on the vibration amplitude and frequency are analyzed.Comparisons of VIV response of the cylinder are made between one degree (only transverse) and two degrees of freedom (streamwise and transverse) and those between the present study and previous ones.The experimental observation indicates that there are two types of streamwise vibration,i.e.the first streamwise vibration (FSV) with small amplitude and the second streamwise vibration (SSV) which coexists with transverse vibration.The vortex shedding pattem for the FSV is approximately symmetric and that for the SSV is alternate.The first streamwise vibration tends to disappear with the decrease of e0/D.For the case of large gap-to-diameter ratios (e.g.e0/D = 0.54～1.58),the maximum amplitudes of the second streamwise vibration and transverse one increase with the increasing gapto-diameter ratio.But for the case of small gap-to-diameter ratios (e.g.e0/D = 0.16,0.23),the vibration amplitude of the cylinder increases slowly at the initial stage (i.e.at small reduced velocity V,),and across the maximum amplitude it decreases quickly at the last stage (i.e.at large Vr).Within the range ofthe examined small mass ratio (m＜4),both streamwise and transverse vibration amplitude of the cylinder decrease with the increase of mass ratio for the fixed value of V,.The vibration range (in terms of Vr ) tends to widen with the decrease of the mass ratio.In the second streamwise vibration region,the vibration frequency of the cylinder with a small mass ratio (e.g.mx = 1.44) undergoes a jump at a certain Vr,.The maximum amplitudes of the transverse vibration for two-degree-of-freedom case is larger than that for one-degree-of-freedom case,but the transverse vibration frequency of the cylinder with two degrees of freedom is lower than that with one degree of freedom (transverse).

Discurso falso en los personajes femeninos de la novela griega

[EN] This paper examines how the female characters in Greek novels have recourse to false speech. Based on an analysis of female speech in Attic tragedy, which was one of the literary genres that exerted the greatest influence on speech parts of the novels, a study is conducted to find out which characters in the novel employ false speech and their purpose in doing so. Two types of false speech were identified: the defensive one, used by the female protagonists or by secondary characters of similar social and ideological status, and the offensive one, used by characters of lower rank, and blameworthy morality within the ideological love's frameword publicized through the novel.