The ceramic artifacts in archaeological black earth (terra preta) from lower Amazon region, Brazil: Mineralogy

Sítios arqueológicos com Terra Preta, denominados de Terra Preta de Índio ou ainda Terra Preta Arqueológica (TPA) são muito freqüentes na Amazônia. As TPA geralmente contém fragmentos de vasos cerâmicos, por vezes abundantes, além de líticos, que são materiais de grande importância para os estudos arqueológicos. Para consubstanciar esses estudos, realizou-se pesquisas mineralógicas e químicas em fragmentos cerâmicos provenientes de dois sítios arqueológicos da região de Cachoeira-Porteira, Estado do Pará. Os fragmentos foram classificados segundo seus principais temperos em: cauixi, cariapé, areia+feldspatos e caco de vaso cerâmico. Mineralogicamente são compostos de quartzo, minerais de argila calcinados (especialmente caulinita), feldspatos (albita e microclínio), hematita, goethita, maghemita, variscita-estrengita, fosfatos amorfos, anatásio, e raramente apatita, rhabdophana e óxidos de Mn e Ba. Cauixi e cariapé são componentes orgânicos silicosos e amorfos a DRX. A composição mineralógica e a morfologia dos seus grãos indicam saprólito (material argiloso rico em quartzo) derivado de rochas ígneas félsicas de granulação fina ou rochas sedimentares ricas em argilominerais como matéria-prima dos vasos cerâmicos. Neste material argiloso cauixi, cariapé e/ou areias, ricas em sílica, foram intencionalmente adicionados. O elevado conteúdo de fosfatos de Al-Fe, amorfos ou como de baixa cristalinidade, originou-se a partir do contato entre a matriz argilosa da parede do vaso cerâmico com a solução aquosa quente durante o cozimento diário de alimentos de origem animal (principal fonte de fósforo). A cristalização dos fosfatos deve ter prosseguida mesmo depois que os vasos foram descartados, e juntos com os restos de matéria orgânica vegetal e animal incorporaram-se aos solos residuais. Participaram desta forma na formação dos solos tipo TPA.

The mineralogy and chemistry of the German and Portuguese tiles used to face a historic building in the Amazon region and their natural susceptibility to tropical weathering

As proeminentes edificações da cidade de Belém foram revestidas durante o século 19 com azulejos produzidos em Portugal e Alemanha que já apresentam distintos graus de degradação. O Palacete Pinho é uma das mais importantes destas edificações e foi selecionado para se investigar a ação do clima tropical amazônico sobre a degradação destes azulejos. Para atingir estes objetivos mapearam-se os azulejos desta edificação visando identificar as modificações de origem orgânica e inorgânica e coletas de amostras para análises. Os minerais foram determinados por DRX, a composição química por métodos clássicos úmidos e MEV/SED e os micro-organismos por microscopia. Os resultados obtidos mostram que os azulejos Portugueses e Alemães são distintos entre si. Enquanto o biscoito é composto de SiO₂ e Al₂O₃, CaO foi encontrado apenas nos Portugueses. Os baixos conteúdos de Na₂O e K₂O indicam adição de materiais para redução da temperatura de fusão. SiO₂ e PbO compõem o vidrado, já CoO e FeO foram adicionados como pigmentos. O biscoito dos azulejos Alemães é constituído de quartzo, mullita e cristobalita, ao contrário do Português com quartzo, gehlenita, diopsídio, calcita e feldspatos. Os vidrados são amorfos ao DRX. As diferenças químicas e mineralógicas entre os azulejos Portugueses e Alemães indicam que foram produzidos por matéria prima distinta, bem como processo termal. As alterações relacionadas com o intemperismo são as finas camadas de detritos (nos Alemães), manchas de oxidação, manchas escuras, descolamento do azulejo (no Português); perda de vidrado e biscoito tornando-se pulverulento como consequência do estabelecimento de Cyanophyta e bacillariophyta (Português). As distintas feições de degradação dos azulejos refletem as suas diferenças mineralógicas e químicas expostas ao clima tropical Amazônico.

Observations on the topography of the plain of Troy; and on the principal objects within, and around it described, or alluded to, in the Iliad : shewing that the system of M. de Chevalier [i.e. Lechevalier], so long upheld, is founded on a most erroneous topography : and also, that the two sources, denominated the warm, and the cold, spring, on which his system materially rests, do not present any contrast; but are exactly alike in point of temperature; that is cold : with a map, in which the topography set forth by M. de Chevalier, is contrasted with the several statements of three other travellers in the Troad : also, a sketch of the western part of the region of Mount Ida /

Includes index.

The Mineralogy and Strength Characteristics of Selected Glaciolacustrine Clays in the Puget Sound Region

The combination of rainy climate, glaciolacustrine clays, and steep topography of the Puget Lowland creates slope stability issues for the regional population. Several glaciolacustrine deposits of laminated silt and clay of different ages contribute to the likelihood of slope failure. The glaciolacustrine deposits are generally wet, range in thickness from absent to >30m, and consist of laminated silt and clay with sand interbeds at the tops and bottoms, sandy laminae throughout the deposits, occasional dropstones and shear zones. The glaciolacustrine deposits destabilize slopes by 1) impeding groundwater flow percolating through overlying glacial outwash sediments, 2) having sandy laminae that lower strength by increasing pore pressure during wet seasons, and 3) increasing the potential for block-style failure because of secondary groundwater pathways such as laminae and vertical fractures. Eight clay samples from six known landslide deposits were analyzed in this study for their mineralogy, clay fraction and strength characteristics. The mineralogy was determined using X-ray Diffractometry (XRD) which revealed an identical mineralogic suite among all eight samples consisting of chlorite, illite and smectite. Nonclay minerals appearing in the X-ray diffractogram include amphibole and plagioclase after removal of abundant quartz grains. Hydrometer tests yielded clay-size fraction percentages of the samples ranging from 10% to 90%, and ring shear tests showed that the angle of residual shear resistance (phi_r) ranged from 11° to 31°. Atterberg limits of the samples were found to have liquid limits ranging from 33 to 83, with plastic limits ranging from 25 to 35 and plasticity indices ranging from 6 to 48. The results of the hydrometer and residual shear strength tests suggest that phi_r varies inversely with the clay-size fraction, but that this relationship was not consistent among all eight samples. The nature of the XRD analysis only revealed the identity of the clay minerals present in the samples, and provided no quantitative information. Thus, the extent to which the mineralogy influenced the strength variability among the samples cannot be determined given that the mineral assemblages are identical. Additional samples from different locations within each deposit along with quantitative compositional analyses would be necessary to properly account for the observed strength variability.

The network structure of a regional tourism organization: Application of he social network theory in one region of Queensland

Regional tourism organizations (RTOs) plays a central role in planning, coordinating and marketing tourism in many areas, including Queensland, Australia. RTOs rely on interaction with a network of other organizations for their efficient functioning. This paper describes an exploratory case study that develops a method for use of social network analysis techniques to analyse the inter-organizational network in one RTO region in Queensland. Results indicate that differences exist in the structure of inter-organizational links between commercial tourism organizations and planning organizations, between tourism organizations and other sectoral clusters, and between organizations at local, regional and state levels. The results highlight areas or improvement in the role and responsibilities of RTOs in Queensland.

Rangeland profitability in the northern Gulf region of Queensland: understanding beef business complexity and the subsequent impact on land resource management and environmental outcomes

The farm-gate value of extensive beef production from the northern Gulf region of Queensland, Australia, is ~$150 million annually. Poor profitability and declining equity are common issues for most beef businesses in the region. The beef industry relies primarily on native pasture systems and studies continue to report a decline in the condition and productivity of important land types in the region. Governments and Natural Resource Management groups are investing significant resources to restore landscape health and productivity. Fundamental community expectations also include broader environmental outcomes such as reducing beef industry greenhouse gas emissions. Whole-of-business analysis results are presented from 18 extensive beef businesses (producers) to highlight the complex social and economic drivers of management decisions that impact on the natural resource and environment. Business analysis activities also focussed on improving enterprise performance. Profitability, herd performance and greenhouse emission benchmarks are documented and discussed.

Weather variability, tides, and Barmah Forest Virus Disease in the Gladstone region, Australia

In this study we examined the impact of weather variability and tides on the transmission of Barmah Forest virus (BFV) disease and developed a weather-based forecasting model for BFV disease in the Gladstone region, Australia. We used seasonal autoregressive integrated moving-average (SARIMA) models to determine the contribution of weather variables to BFV transmission after the time-series data of response and explanatory variables were made stationary through seasonal differencing. We obtained data on the monthly counts of BFV cases, weather variables (e.g., mean minimum and maximum temperature, total rainfall, and mean relative humidity), high and low tides, and the population size in the Gladstone region between January 1992 and December 2001 from the Queensland Department of Health, Australian Bureau of Meteorology, Queensland Department of Transport, and Australian Bureau of Statistics, respectively. The SARIMA model shows that the 5-month moving average of minimum temperature (β = 0.15, p-value < 0.001) was statistically significantly and positively associated with BFV disease, whereas high tide in the current month (β = −1.03, p-value = 0.04) was statistically significantly and inversely associated with it. However, no significant association was found for other variables. These results may be applied to forecast the occurrence of BFV disease and to use public health resources in BFV control and prevention.