iPad use in fieldwork: formal and informal use to enhance pedagogical practice in a bring your own technology world

We report on use of iPads (and other IOS devices) for student fieldwork use and as electronic field notebooks and to promote active. We have used questionnaires and interviews of tutors and students to elicit their views and technology and iPad use for fieldwork. There is some reluctance for academic staff to relinquish paper notebooks for iPad use, whether in the classroom or on fieldwork, as well as use them for observational and measurement purposes. Students too are largely unaware of the potential of iPads for enhancing fieldwork. Apps can be configured for a wide variety of specific uses that make iPads useful for educational as well as social uses. Such abilities should be used to enhance existing practice as well as make new functionality. For example, for disabled students who find it difficult to use conventional note taking. iPads can be used to develop student self-directed learning and for group contributions. The technology becomes part of the students’ personal learning environments as well as at the heart of their knowledge spaces – academic and social. This blurring of boundaries is due to iPads’ usability to cultivate field use, instruction, assessment and feedback processes. iPads can become field microscopes and entries to citizen science and we see the iPad as the main ‘computing’ device for students in the near future. As part of the Bring Your Own Technology/Device (BYOD) the iPad has much to offer although, both staff and students need to be guided in the most effective use for self-directed education via development of Personal Learning Environments. A more student-oriented pedagogy is suggested to correspond to the increasing use of tablet technologies by students

Morphology of terebelliform polychaetes (Annelida: Polychaeta: Terebelliformia), with a focus on Terebellidae

The morphology of terebelliform polychaetes was investigated for a phylogenetic study focused on Terebellidae. For this study, specimens belonging to 147 taxa, preferably type material or specimens from type localities or areas close to them, were examined under stereo, light and scanning electron microscopes. The taxa examined were 1 Pectinariidae, 2 Ampharetidae, 2 Alvinellidae, 8 Trichobranchidae, and 134 Terebellidae, which included 8 Polycirrinae, 15 Thelepodinae, and 111 Terebellinae. A comparison of the morphology, including prostomium, peristomium, anterior segments and lobes, branchiae, glandular venter, nephridial and genital papillae, notopodia and notochaetae, neuropodia and neurochaetae, and posterior end, was made of all the currently recognized families of terebelliform polychaetes, with special emphasis on Terebellidae. A discussion of the characters useful to distinguish between genera is given. This character set will be used in a subsequent phylogenetic study (Nogueira & Hutchings in prep.)

Microscopic / telescopic (universes unfold)

This exhibition was inspired by lens based observation; what is observed through the microscope – plankton and single cell organisms – finds its origin in what is observed through the telescope – stars and galaxies. The project explores two spatially divergent contexts. Artist, Melinda Capp explores the micro-scopic with porcelain objects, artist books and images derived microscopes and Daniel Armstrong references the macro-scopic with video, photography, lens based objects and installation of interactive sculpture / optical instruments to create an experiential connection between celestial phenomena/images and the viewer.

Estudo fitossanitário, multiplicação e taxonomia de nematoides encontrados em sementes de gramíneas forrageiras no Brasil

Pathogens in seeds imply quarantine constraints for exportation. This research aimed to quantify nematodes and fungus populations in seed samples of forage grasses from the main Brazilian producing states, and to multiply the nematodes in vitro, as well to study the taxonomy of the nematodes detected. Seed samples of 237 lots of different forage grasses from São Paulo, Minas Gerais, Mato Grosso do Sul, Mato Grosso, Bahia, and Goias States were collected and shipped for analyses in the Nematology and Plant Pathology Laboratories at FCAV[long dash]UNESP [long dash] Jaboticabal( SP) by Comercio e Industria Matsuda Imp., Exp. Ltd. Nematodes were extracted from 10 g of seeds. To detect the fungus, the Blotter-test was applied. The identifications were done by using a photonic microscope and a stereomicroscope. For the study of in vitro multiplication of the nematodes, the following parthenogenetic species were selected: Aphelenchoides sexlineatus, Aphelenchus sp. and Ditylenchus montanus. Cultures of the fungi Fusarium sp. and Didymella brioniae were used as substrate to multiply the nematodes in Petri dishes. Each plate was inoculated with 10 mature females, then incubated in B.O.D. at 25 [plus or minus]1 [degree]C, in the dark. Thirty days after inoculation, the nematodes were extracted. The populations obtained in the suspensions were estimated in the microscope using Peters counting chamber, and the reproduction factor estimated. For the taxonomic study of the nematodes, morphological characters of specimens were recorded under the light and scanning electron microscopes. The results indicated a large distribution of nematodes and fungus in seeds of forage grasses in Brazil. The nematodes identified in the present study were: Aphelenchoides besseyi, A. bicaudatus, A. fragariae, A. sexlineatus, Ditylenchus myceliophagus, D. dipsaci, D. montanus, and Aphelenchus sp. In addition, species of the fungi Fusarium, Helminthosporium and Phoma were recovered.

Morphological description of Amblyomma brasiliense Aragão, 1908 (Acari: Ixodidae) larvae and nymphs

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Iron phthalocyanine in non-aqueous medium forming layer-by-layer films: growth mechanism, molecular architecture and applications

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Quantitative fractography by digital image processing: NIH Image macro tools for stereo pair analysis and 3-D reconstruction

A set of NIH Image macro programs was developed to make qualitative and quantitative analyses from digital stereo pictures produced by scanning electron microscopes. These tools were designed for image alignment, anaglyph representation, animation, reconstruction of true elevation surfaces, reconstruction of elevation profiles, true-scale elevation mapping and, for the quantitative approach, surface area and roughness calculations. Limitations on time processing, scanning techniques and programming concepts are also discussed.

MRT letter: Extended depth from focus reconstruction method for stretch zone measurement in 15-5PH steel

The stretch zone width (SZW) data for 15-5PH steel CTOD specimens fractured at -150 degrees C to + 23 degrees C temperature were measured based on focused images and 3D maps obtained by extended depth-of-field reconstruction from light microscopy (LM) image stacks. This LM-based method, with a larger lateral resolution, seems to be as effective for quantitative analysis of SZW as scanning electron microscopy (SEM) or confocal scanning laser microscopy (CSLM), permitting to clearly identify stretch zone boundaries. Despite the worst sharpness of focused images, a robust linear correlation was established to fracture toughness (KC) and SZW data for the 15-5PH steel tested specimens, measured at their center region. The method is an alternative to evaluate the boundaries of stretched zones, at a lower cost of implementation and training, since topographic data from elevation maps can be associated with reconstructed image, which summarizes the original contrast and brightness information. Finally, the extended depth-of-field method is presented here as a valuable tool for failure analysis, as a cheaper alternative to investigate rough surfaces or fracture, compared to scanning electron or confocal light microscopes. Microsc. Res. Tech. 75:11551158, 2012. (C) 2012 Wiley Periodicals, Inc.

Imbibition of Swietenia macrophylla (Meliaceae) seeds: the role of stomata

Background and Aims the occurrence of stomata in seed coats is uncommon and there is limited information about their function(s). The aim of this study was to verify the distribution of stomata in seed coats of Swietenia macrophylla and to relate it to the imbibition process and aspects of the structure of the outer integument layers.Methods For the structural and ultrastructural studies, the seeds were processed using the usual techniques and studied under light and scanning electron microscopes. Histochemical tests were employed to identify the cell wall composition in the different seed coat portions. To assess the role of the stomata in the imbibition, non-impervious seeds were compared with partially impervious ones, in which only the embryo, median or hilar regions were left free. Further, the apoplastic pathway marker was employed to confirm the role of the stomata as sites of water passage during imbibition.Key Results A positive relationship was observed between seed coat thickness and stomata density. The stomata were devoid of movement, with a large pore. They occurred in large numbers in the embryo region and extended with lower frequency towards the wing. Imbibition rates were related to stomata density, suggesting that the stomata act as preferential sites for water entry in the S. macrophylla seeds.Conclusions At maturity, the stomata in the seed coat play a significant role in seed imbibition. The data may also infer that these permanently opened stomata have an important role in gas exchange during seed development, aiding embryo respiration.

Anatomy and ontogeny of the pericarp of Pterodon emarginatus Vogel (Fabaceae, Faboideae), with emphasis on secretory ducts

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Floral development in Potamogeton (Potamogetonaceae, Alismatales) with emphasis on gynoecial features

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Microscopical Evaluation of Extracellular Matrix and Its Relation to the Palatopharyngeal Muscle in Obstructive Sleep Apnea

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Effects of thickness coating on the electrochemical behaviour of thermal spray Cr3C2-NiCr coatings

Thermally sprayed HVOF coatings are increasingly being used in industrial applications where high wear and corrosion resistance are needed [1,2]. In this paper, electrochemical ac and de experiments were used in order to obtain the corrosion resistance of coated steel with different numbers of Cr3C2-NiCr layers. This work has been performed in order to determine the role of coating thickness in the corrosion behaviour of a steel protected with cermet thermally sprayed coatings. It is known that a thicker layer protects better against corrosion when a metallic coating is evaluated. But cermet coatings, such as Cr3C2-NiCr, contain higher levels of porosity and residual stresses than metallic coatings, which really could influence the corrosion resistance of the deposited layer. Electrochemical measurements, such as Open-Circuit Potential (E-Osubset of), Polarisation Resistance (RP) and Cyclic Voltammetry (CV), were performed in an aerated 3.4 NaCI media (%wt.). Electrochemical Impedance Measurements (EIS) were also done in order to obtain a mechanism that explains the corrosion process. Structural Characterisation was carried out by means of Optical and Scanning Electron Microscopes (OM, SEM) with an Energy Dispersive Spectrometry analyser (EDS). Results show that the corrosion resistance of the complete system is mainly influenced by the substrate behaviour. The application of a higher number of deposited layers did not substantially increase their anticorrosive properties. Stress generation during the spraying deposition process plays an important role in the behaviour of the coated steel against corrosion phenomena. (C) 2002 Elsevier B.V. B.V All rights reserved.

Role of intermediary cells in Peltodon radicans (Lamiaceae) in the transfer of calcium and formation of calcium oxalate crystals

Com o objetivo de estudar a relação entre cristais de oxalato de cálcio e floema, fragmentos de folhas de Peltodon radicans foram fixados e processados, segundo métodos usuais, para estudos ao microscópio de luz e eletrônico de transmissão. Observou-se que os cristais ocorrem nas células da bainha do feixe, lateralmente em relação ao floema. Células intermediárias estabelecem conexão entre elemento crivado e células da bainha, portadoras de cristais, com crescimento intrusivo entre estas. Íons cálcio são abundantes no citoplasma das células da bainha que contém cristais de oxalato de cálcio. Nas células intermediárias a detecção ultra-citoquímica de cálcio também apresentou resultados positivos, enquanto nos elementos crivados a presença deste íon não foi constatada. Há, portanto, um gradiente crescente de concentração de cálcio dos elementos crivados para as células da bainha. Assim, formulamos a hipótese de que a formação de cristais de oxalato de cálcio tem, em P. radicans, o objetivo de controlar os níveis de cálcio citossólico nos elementos crivados.

Ontogênese, anatomia e ultra-estrutura dos nectários extraflorais de Hymenaea stigonocarpa Mart. ex Hayne (Fabaceae - Caesalpinioideae)

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)