Hydrochemical evaluation of the quality of some Brazilian waters

This investigation was carried out within the Parane sedimentary basin and neighbourhood in Brazil and involved the sampling of different water types with the purpose of evaluating its quality. Several methods were utilized for acquiring the hydrochemical data and a novel technique has been developed for evaluating the gross alpha and beta radioactivities in water, through a combined gamma-alpha spectrometry technique. The results obtained for the analyzed samples were compared with the guideline values established by the São Paulo State and Brazilian Health Ministry legislations for defining potable water standards and for the prevention and control of pollution in the environment. The hydrochemical data allowed evaluation of diverse problems related to the interaction between society and the environment such as sugarcane production and the releases associated with gas stations suppliers. The geogenic input of sulfate in groundwater was also identified. The established radiometric technique was properly calibrated and successfully applied to the analysis of different water types utilized for human consumption.

Prospecção geofísica em ocorrência de cobre localizada na bacia sedimentar do Camaquã (RS)

Estudos de pesquisa mineral são fundamentais para o reconhecimento e a incorporação de novas reservas. Esse trabalho apresenta os resultados de aplicação do método geofísico da eletrorresistividade numa ocorrência mineralizada em carbonatos de cobre, por meio da técnica de caminhamento elétrico em arranjo azimutal. A área de estudos está inserida na bacia sedimentar do Camaquã, formada por um conjunto de unidades estratigráficas sedimentares e vulcanogênicas, onde são descritas diversas ocorrências cupríferas. A presença de azurita e malaquita em fraturas e zonas de maior porosidade em arenito encaixante define a geologia local. Os modelos de inversão revelam anomalias circulares de resistividade moderada para até 25m abaixo da ocorrência aflorante e anomalias de baixa resistividade em profundidades abaixo de 25m, além de áreas adjacentes com alta resistividade. Indicadores de mineralização descritos para ocorrências de cobre estudadas, no âmbito da bacia sedimentar do Camaquã, ocorrem na área de estudos e permitem caracterização em termos de resistividade elétrica. Áreas com silicificação apresentam alta resistividade, enquanto que valores intermediários são atribuídos a zonas com carbonatação e, finalmente, áreas de baixa resistividade, provavelmente, indicam concentrações de sulfetos disseminados.

Uranium in groundwaters from Botucatu-Piramboia aquifer, Brazil

Groundwater from 60 pumped tubular wells of the Botucatu-Piramboia aquifer system located at the Parana sedimentary basin in Brazil were chemically analysed with the aim of evaluating if the mechanisms related to the migration of uranium can generate concentrations greater than the maximum permissible limit in drinking water, as defined by the Brazilian national standards.

Health risk related to radon in a thermal spa utilizing waters from Guarani aquifer

This investigation was carried out within the Parana sedimentary basin, Brazil, involved the sampling of groundwater and air, and was realized with the purpose of evaluating the radioactivity, due to radon gas, in a thermal spa utilizing the waters from Guarani (Botucatu-Piramboia) aquifer. The results reported here provide additional information relative to that of previous studies focusing on the presence of radionuclides in the aquifer, which have mainly characterized those belonging to uranium and thorium series decay, such as the uranium isotopes (U-238 and U-234), radium isotopes (Ra-226 and Ra-228), radon daughters (Bi-214 and Pb-214) and radon (Rn-222) itself the results obtained were compared with the maximum permissible concentration limits in air and drinking water defined by international standards, such as the guidelines for drinking water quality established by the World Health Organization. The possible processes responsible for the presence of radon in the aquifer were also considered in order to evaluate the data obtained.

The influence of the physigraphic and geologic condition aspects on the environmental degradation in the city of Guaratingueta

The present paper deals with environmental degradation in the city of Guaratingueta, Brazil; as a result of disordered urban settlement and development. Three site areas in the city resting on different geologic units were selected for the analyses, i.e.: precambrian rocks, tertiary sedimentary basin, and recent quaternary soil deposits. It has been found that geological and geotechnical aspects are fundamental to form the basis for environmental preservation and urban planning.

Groundwater geochemical evolution in the northern portion of the Guarani Aquifer System (Brazil) and its relationship to diagenetic features

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Aspectos lithoestratigraficos da Formacao Uberaba, Cretaceo da Bacia do Parana.

The Uberaba Sandstone formation with local expression in the city of Uberaba (State of Minas Gerais) and vicinities, has been focused from different lithostratigraphic points of view. In spite of its characterization by previous authors as a formation, its geographic distribution as well as its relationship with other units of the Parana sedimentary basin has never been adequately elucidated. Simultaneously with a better characterization of the Uberaba Formation petrographic properties, the authors redefine its geographic distribution and suggest a possible stratigraphic relationship with other formations of the Bauru Group which have been defined in the State of Sao Paulo.-English summary

Mapeamento do contorno estrutural do embasamento da bacia sedimentar de Curitiba - PR

The sedimentary Curitiba basin is located in the Central-Southern part of the first Parananense plateau, and comprises Curitiba (PR), and part of the neighbour Municipalities (fig.1). It is supposed to be of Plio-Pleistocene age. It has a shallow sedimentary fulfillment, represented by the Guabirotuba formation (BIGARELLA and SALAMUNI, 1962) which is dristributed over a large area of about 3.000km2. The internal geometry, not entirely known yet, is actually object of detailed research, that shows its geological evolution to Cenozoic tectonic movements. For the purpose of this study the definition of the structural contour of the basement and their depo-centers is fundamental. This paper presents the results of the integration of surface and subsurface data, processed by statistical methods, which allowed a more precise definition of the morphostructural framework of the basement. For the analysis of the geological spacial data, specific softwares were used for statistical processing for trend surfaces analysis. The data used in this study are of following types: a) drilling logs for ground water; b) description of surface points of geological maps (CRPM, 1977); c) description of points of geotechnical drillings and down geological survey. The data of 223 drilling logs for ground water were selected out of 770 wells. The description files of 700 outcrops, as well as planialtimetric field data, were used for the localization of the basement outcrop. Thus, a matrix with five columns was set up: utm E-W (x) and utm N-S (y); surface altitude (z); altimetric cote of the contact between sedimentary rocks and the basement (k); isopachs (l). For the study of the basement limits, the analysis of surface trends of 2(nd) and 3(rd) degree polinomial for the altimetric data (figs. 2 and 3) were used. For the residuals the method of the inverse of the square of the distance (fig.4) was used. The adjustments and the explanations of the surfaces were made with the aid of multiple linear regressions. The analysis of 3rd degree polinomial trend surface (fig.3) confirmed that the basement tends to be more exposed towards NNW-SSE explaining better the data trend through an ellipse, which striking NE-SW and dipping SW axis coincides with the trough of the basin observed in the trending surface of the basement. The performed analysis and the respective images offer a good degree of certainty of the geometric model of the Curitiba Basin and of the morphostructure of its basement. The surface trend allows to sketch with a greater degree of confidence the structural contour of the topgraphic surface (figs. 5 and 6) and of the basement (figs. 7 and 8), as well as the delimitation of intermediate structural heights, which were responsible for isolated and assymmetric depocenters. These details are shown in the map of figures 9 and 10. Thus, the Curitiba Basin is made up by a structural trough stretching NE-SW, with maximum preserved depths of about 80m, which are separated by heights and depocenters striking NW-SE (fig. 11). These structural features seems to have been controlled by tectonic reactivation during the Tertiary (HASUI, 1990) and which younger dissection was conditioned by neotectonic processes (SALAMUNI and EBERT, 1994).

The use of shallow seismic reflection technique in near surface exploration of urban sites: An evaluation in the city of SãO Paulo, Brazil

In order to evaluate the use of shallow seismic technique to delineate geological and geotechnical features up to 40 meters depth in noisy urban areas covered with asphalt pavement, five survey lines were conducted in the metropolitan area of São Paulo City. The data were acquired using a 24-bit, 24-channel seismograph, 30 and 100 Hz geophones and a sledgehammer-plate system as seismic source. Seismic reflection data were recorded using a CMP (common mid point) acquisition method. The processing routine consisted of: prestack band-pass filtering (90-250 Hz); automatic gain control (AGC); muting (digital zeroin) of dead/noisy traces, ground roll, air-wave and refracted-wave; CMP sorting; velocity analyses; normal move-out corrections; residual static corrections; f-k filtering; CMP stacking. The near surface is geologically characterized by unconsolidated fill materials and Quaternary sediments with organic material overlying Tertiary sediments with the water table 2 to 5 m below the surface. The basement is composed of granite and gneiss. Reflections were observed from 40 milliseconds to 65 ms two-way traveltime and were related to the silt clay layer and fine sand layer contact of the Tertiary sediments and to the weathered basement. The CMP seismic-reflection technique has been shown to be useful for mapping the sedimentary layers and the bedrock of the São Paulo sedimentary basin for the purposes of shallow investigations related to engineering problems. In spite of the strong cultural noise observed in these urban areas and problems with planting geophones we verified that, with the proper equipment, field parameters and particularly great care in data collection and processing, we can overcome the adverse field conditions and to image reflections from layers as shallow as 20 meters.

Geo(anthropo)genic factors affecting the radioactivity in groundwaters from Guarani aquifer, Brazil

This investigation was carried out within the Paraná sedimentary basin, involved the sampling of 77 pumped tubular wells, and was realized with the puipose of evaluating the radioactivity in the Brazilian part of Guarani (Botucatu-Pirambóia, Tacuarembó, Misiones) aquifer. The radioactivity due to nuclides belonging to uranium and thorium series decay was investigated in terms of the uranium isotopes 234U and 238U, radon (222Rn), and the radium isotopes 226Ra and 228Ra. The obtained results were compared with the maximum permissible concentration limits in drinking water defined by the Brazilian national standard, as well with the guidelines for drinking water quality established by the World Health Organization. The importance of water-rock/soil interactions was considered in order to explain most of the obtained data.

Tolerância de perdas de solo na bacia do rio Itiquira, Mato Grosso, Brasil

The geographic area of the present study corresponds to the basin of the Itiquira river high course (Figure 1), in the portion that extends from the tributaries of its source, in the east of the plateau Correntes/Itiquira, in the neighbourhoods the city of Alto Garç as, to the scarp of the São Jerônimo mountain range, toward the west of Itiquira, in the state of Mato Grosso, totalizing 5,361 km 2. The area is placed in the eastern part of the Alto Paraguai basin, in the western portion of the Paraná Sedimentary Basin plateau. Through GIS techniques, it was possible to asses total soil losses from the Itiquira river basin, considering the years of 1966, 1985 and 1996, being based on the Universal Soil Loss Equation. Thus, in 1966 the basin lost 201,546.94 ton of soil, with an average loss of 0.37 ton/ha/year. Considering that the total area of the Itiquira river basin is of 536,100 ha, while in 1985 the soil losses had passed to 1,760,833.40 ton, with an increase of approximately 8.5 times. The average of soil losses in 1985 was of 3.28 ton/ha/year. In 1996 the basin lost 1,662,043.24 ton, with a reduction of only 9.4% in relation to 1985 but, in relation the 1966, the increase continued in the order of 8 times. The average losses per hectare in this year was in the order of 3.10 ton/ha/year (Chart 1). The map of potential of the laminar erosion for 1966 (Figure 3), shows to the highest values in small areas, situated in the northeast of the area, in Alto Garças, with values between 10 the 20 ton/ha/year and some spots in sources of the Itiquira and Ariranha rivers, with values between 1 the 5 ton/ha/year. In a general way, however, the area presents low soil loss for laminar erosion in this year, with inferior values to 1 ton/ha/year. The higher class of erosion, over 10 ton/ha/year, occupied 2,947 ha in 1966. In the year of 1985 (Figure 4), the erosive process spread over the entire studied area, and the class of erosion over of 10 ton/ha/year, already started to occupy 78,437 ha, implying an increase of approximately 27 times in 19 years. A strong increment in the erosive process was noticed in the western part of the area, to along the BR-163 road, exactly where great areas of natural vegetation (open pasture) had been transformed in culture and pasture areas. In the north-eastern part of the area it was also noticed an increment in the erosive process in agreement with the increase of culture areas and reduction of the natural areas, but it was not of so intense form as in the western portion of the area. In the year of 1996 (Figure 5), the class of erosion over of 10 ton/ha/year had diminished for a total of 53.499 ha noticing a retraction of the erosive process in the western part of the area, alongside the BR-163 road. On the other hand, it occurred a strong increment in the northern part of the area, in the neighbourhoods of the city of Alto Garças, alongside the BR-364 road and part of the MT-040 road. In a general way, in the outskirts of the city of Itiquira, in the central part of the area, it was verified an increase of the amount of zones with erosion between 0-1 ton/ha/year, passing to the immediately superior class, of 1-3 ton/ha/year; scarce data of hydrosedimentology in the UHE Itiquira (1999), shows good agreement with the values gotten for the EUPS (Chart 2). Based on the hydric classification proposal for FAO (1967) (Chart 3), it is noticed that areas with high degree of erosion (> 50) in the analysed area are very restricted, occupying 493 ha in 1985 and 332 ha in 1996 (Chart 4). In 1996 appeared as isolated spots in the north of Itiquira and Alto Garças, however beyond limits of the Itiquira river basin. These areas require special cares in its use as agricultural areas. Aiming at identifying and indicating the areas of potential risk of erosion and that need implementation of conservation practices, it was elaborated the map of limit of tolerance to the soil losses. In 1966 (Figure 6), areas with soil losses over of the tolerable were restricted to small spots located in the eastern part of the area, occupying 0.43% of the total of the area; already in 1985 (Figure 7), this percentage passed to 5.86%, spreading for all the area; in 1996 (Figure 8) it is observed a fast reduction of the areas with soil losses over of the tolerance limit, passing 5.43% of the total of the area. All the areas with losses over of the tolerable value must be considered as risk areas and were done in these areas studies for implementation of conservation practices.

Facies sedimentares e ambientes deposicionais da Formação Barbalha no vale do cariri, bacia do araripe, nordeste do Brasil

The Aptian Barbalha Formation represents the first unit of the post-rift sequence of the Araripe Basin and crops out at the slopes of the Aranpe plateau in the eastern part ot Aranpe Basin. The unit has also been named Kio da Batateira Formation, but this name is here used in its original definition as Batateira Beds, an interval of great lateral continuity and characterized by the presence of bituminous shales of the Alagoas Stage (P-270 palynological biozone). This paper presents the results of a stratigraphic analysis carried out along the outcrop belt in order to establish the facies architecture and to interpret deposicional environments of the siliciclastic Barbalha Formation. Detailed stratigraphic vertical sections were measured and correlated. They allowed the recognition of two depositional sequences characterized by fining upward arrangement of facies, beginning with fluvial deposits and ending with lacustrine deposits at their tops. The end of the first cycle is represented by black shales and brecciated limestones of the Batateira Beds that record a geologic event of regional magnitude and serve as meaningful long-distance stratigraphic mark. The second deposicional sequence overlies disconformably the Batateira Beds and begins with clast-supported conglomerates, which are covered by a succession of fluvial sandstones and minor intervals of pelitic rocks. The sandstone content diminishes towards the top and the upper part of the unit is characterized by the presence of ostracode-rich green shales. The Barbalha Formation is conformably overlaid by Late Aptian lacustrine limestones belonging to the Crato Member of the Santana Formation.

Diques clásticos na formação corumbataí (p) no nordeste da bacia do paraná, SP: Análise sistemática e significações estratigráficas, sedimentológicas e tectônicas

This paper aims to present the results of systematic survey on clastic dykes in the Corumbataí Formation (Permian), in the northeast region of the State of São Paulo. Besides this, the paper analyses genetic aspects of those features as well as their stratigraphic and sedimentologic implications in terms of geologic evolution of the northeastern Paraná Sedimentary Basin during Permian times. The field works had been developed in 3 main Corumbataí Formation outcrops (2 road cuts and a quarry) supposed to show the most important clastic dikes occurrences in the studied area. Basically, the sedimentary intrusions are formed by fine sand or silt size particles and had penetrated host rocks as near-vertical, centimeter thick, dykes (most common form) or as horizontal sheets, forming clastic sills (subsidiary form), both with variable geometric forms and dimensions. A lot of dyke walls show undulations suggesting pre-diagenetic clastic intrusions, probably near the ancient depositional surface. Almost all intrusions occur in the superior third portion of the Corumbataí Formation and some similar features seem to appear in the adjoining superposed Pirambóia Formation base. In this article the authors defend a seismic origin hypothesis for the clastic intrusions. It is important to mention that clastic intrusions tend to occur linked to expressive seismic events, with magnitude upper to 5. The analysis of isopach maps of the Permian and Mesozoic units of the Paraná Sedimentary Basin in the study area suggests a depositional system changing, from epicontinental sea conditions to shallow platform and, finally, to coastal deserts. Probably, this environmental change was driven by regional uplift accompanied by seismic events. It is possible that ancient seismicity triggered liquefaction processes and the resulting clastic intrusions. In this sense, those clastic features might be properly namedseismites.

Grupo itararé (P - C da bacia do Paraná) nas regiões de Limeira e Piracicaba - SP: Contribuição ao estudo das litofácies

The Permian-Carboniferous Itararé Group is one complexe lithostratigraphic unit of the Paraná Basin, southeastern Brazil, typically marked by discontinuity of its lithofacies. Under the exploratory point of view, the unit represents one of the most significant intervals of the basin, since several occurrences of mineral and energetic resources are associated to it, as groundwater, petroleum and coal. The prospection and exploitation of these resources depend on a good understanding of the stratigraphic architecture and the paleogeography. There are many contributions on the specialized literature which deal with this subject, although the regions of Limeira and Piracicaba (superior portion of the unit) still lack new investigations, which may contribute to the understanding of its lithofacies and related sedimentary processes. It was analyzed the sedimentary sets pilling up, followed by stratigraphic correlations between the two regions. Moreover, from sedimentary structures, it was made paleocurrent measurement with the purpose of obtaining indicative patterns of the sedimentary polarity, contributing for the comprehension of the paleogeography. Recent studies in the Domo de Pitanga region (between Rio Claro and Piracicaba cities) and in the Corumbataí river drainage basin, were taken also as basis for possible correlations. It was obtained a frame of the lithofacies arrangement, their vertical and lateral relations, as well as their depositional polarities.

Evolução do rifteamento e paleogeografia da margem Atlântica Equatorial do Brasil: Triássico ao Holoceno

The Equatorial Atlantic Margin evolved from three rift systems recorded by a complex set of sedimentary basins developed since Upper Triassic to the Lower Cretaceous (Albian). The first rift system formed Foz do Amazonas Basin in Upper Triassic; the second phase formed Marajó Basin in Berriasian, a new rift in Foz do Amazonas Basin in Valanginian and Bragança-Viseu, Ilha Nova, São Luís e Barreirinhas basins in Aptian; the third phase formed Barreirinhas and Pará- Maranhão basins and a new rifting in the Foz do Amazonas Basin between the Aptian and Albian and evolved to continental break up. The main paleostress field during rift evolution was NE-SW and after the continental break up took the E-W direction, from the development of transform zones in the oceanic crust. From Miocene, South America was subjected to intraplate tectonics, which resulted in formation of E-W transcurrent faults that generated transtensive and transpressive segments that formed sedimentary basins and hills, resulting in changes in the drainage network. In Quaternary the landscape was modified by the last ice age that changed the sea level; the coastal drainage network was drowning resulting in the formation of the current line coast.