A Clinical Study of 406 Sinus Augmentations With 100% Anorganic Bovine Bone

Background: The aim of the present study is to evaluate the use of anorganic bovine bone (ABB) associated with a collagen membrane (CM) for a sinus graft by means of clinical, histologic, and radiographic parameters in cases with bone availability <= 7 mm. A preliminary evaluation consisted of a clinical examination, computed tomography (CT), and a panoramic x-ray. Methods: Ninety-two patients requiring bilateral sinus grafts and 222 requiring unilateral procedures (total: 406 sinuses) participated in this study. A total of 1,025 implants were placed in the grafted sinuses. A total of 118 implants were placed simultaneously with the sinus graft (one stage), and 907 implants were placed in a subsequent surgery (two stages), 6 to 12 months after the graft was performed. In seven cases, a biopsy was harvested for histomorphometric analysis. Recall appointments were scheduled every 6 months, and panoramic and periapical x-rays were required every year for 3 years. Results: Among 1,025 implants, 19 were lost (survival rate: 98.1%). The difference in survival rates for implants placed in native bone: <= 3 mm (98.1%), >3 to <= 5 mm (98.6%), and >5 to <= 7 mm (97.0%) was not statistically significant (P = 0.3408). The survival rates for implants with rough and machined surfaces (98.6% and 97.0%, respectively) were not statistically significant (P = 0.0840). The histomorphometric analysis showed new bone formation (39.0% +/- 12%), marrow space (52.9% +/- 9.3%), and residual ABB (8% +/- 2.7%). Conclusion: Our results indicated that 1,025 implants placed in sinuses grafted exclusively with ABB combined with CM led to an excellent and predictable survival rate of 98.1%. J Periodontol 2009;80:1920-1927.

Use of 4 Immediately Loaded Zygomatic Fixtures for Retreatment of Atrophic Edentulous Maxilla After Complications of Maxillary Reconstruction

This article reports the 20-month clinical outcome of the use of 4 zygomatic implants with immediate occlusal loading and reverse planning for the retreatment of atrophic edentulous maxilla after failed rehabilitation with autogenous bone graft reconstruction and maxillary implants. The intraoral clinical examination revealed mispositioned and loosened implants underneath a maxillary complete denture. The panoramic radiograph showed 6 maxillary implants. One implant was displaced into the right maxillary sinus, and the implant anchored in the region of tooth 21 was fractured. The other implants presented peri-implant bone loss. The implants anchored in the regions of teeth 21 to 23 and 11 to 13 were first removed. After 2 months, the reverse planning started with placement of 4 zygomatic fixtures, removal of the implants migrated into the sinus cavity and anchored in the region of tooth 17, and installation of a fixed denture. After 20 months of follow-up, no painful symptoms, peri-implant inflammation or infection, implant instability, or bone resorption was observed. The outcomes of this case confirm that the zygoma can offer a predictable anchorage and support function for a fixed denture in severely resorbed maxillae.

Maxillary Bone Defect Reconstruction Using Porous Polyethylene Implants

Purpose: The aim of this study was to evaluate the bone repair process in the maxillary sinus in monkeys treated with high-density porous polyethylene (Medpor)Methods: Four capuchin monkeys (Cebus apella) were submitted to bilateral horizontal osteotomies in the anterior wall of the maxillary sinus and divided into 2 groups: control group, left side with no implants, and porous polyethylene group, right side with Medpor. After a period of 145 days after implant placement, the maxillae were removed for histologic and histometric analyses.Results: Bone repair in osteotomized areas took place by connective tissue in 58.5% and 58.7% in the control group and the porous polyethylene group, respectively. In the contact surface with Medpor, bone repair occurred in 41.3%.Conclusions: Medpor was not reabsorbed within the period of this study and allowed bone repair surrounding it. The porous polyethylene constitutes a feasible alternative for bone defect reconstruction.

Maxillary osteosarcoma in a young patient undergoing postorthodontic treatment follow-up: The importance of ongoing oral examinations

Osteosarcoma is a common primary malignant tumor in long bones; it generally occurs in young adults. It is considered infrequent in the head and neck regions, where it is usually associated with poor outcomes and rates of survival. From a histopathologic point of view, osteosarcomas are commonly classified as osteoblastic, chondroblastic, or fibroblastic, although several unusual microscopic subtypes have also been reported. The purpose of this article was to present a case report of a maxillary chondroblastic osteosarcoma involving the maxillary sinus and the maxilla of a young woman who was diagnosed during early postorthodontic treatment follow-up. Treatment, prosthetic rehabilitation, and follow-up details are provided. Most importantly, this patient shows the importance of complete and systematic oral examinations during any routine dental treatment. (Am J Orthod Dentofacial Orthop 2011;139:845-8)

Histomorphometric evaluation of human sinus floor augmentation healing responses to placement of calcium phosphate or Ricinus communis polymer associated with autogenous bone

Background: Prosthetic rehabilitation of the posterior maxilla with dental implants is often difficult because of proximity to the maxillary sinus and insufficient bone height. Maxillary sinus floor augmentation procedures aim to obtain enough bone with an association between biomaterials and autogenous bone.Purpose: the purpose of this study was to evaluate histomorphometrically two grafting materials (calcium phosphate and Ricinus communis polymer) used in maxillary sinus floor augmentation associated with autogenous bone.Materials and Methods: Biopsies were taken from 10 consecutive subjects (mean age 45 years) 10 months after maxillary sinus floor augmentation. The sinus lift was performed with a mixture of autogenous bone and R. communis polymer or calcium phosphate in a 1:2 proportion. Routine histologic processing and staining with hernatoxylin and eosin were performed.Results: the histomorphometric analysis indicated satisfactory regenerative results in both groups for a mean of bone tissue in the grafted area (44.24 +/- 13.79% for the calcium phosphate group and 38.77 +/- 12.85% for the polymer group). Histologic evaluation revealed the presence of an inflammatory infiltrate of mononuclear prevalence that, on average, was nonsignificant. The histologic sections depicted mature bone with compact and cancellous areas in both groups.Conclusion: the results indicated that both graft materials associated with the autogenous bone were biocompatible, although both were still present after 10 months.

VEGF and MVD expression in sinus augmentation with autologous bone and several graft materials

The aim of this study was to assess vascular endothelial growth factor (VEGF) expression and microvessel density (MVD) in maxillary sinus augmentation with autogenous bone and different graft materials for evaluating their angiogenic potential.Biopsies were harvested 10 months after sinus augmentation with a combination of autogenous bone and different graft materials: hydroxyapatite (HA, n = 6 patients), demineralized freeze-dried bone allograft (DFDBA, n = 5 patients), calcium phosphate (CP, n = 5 patients), Ricinus communis polymer (n = 5 patients) and control group - autogenous bone only (n = 13 patients).In all the samples, higher intensities of VEGF expression were prevalent in the newly formed bone, while lower intensities of VEGF expression were predominant in the areas of mature bone. The highest intensity of VEGF expression in the newly formed bone was expressed by HA (P < 0.001) and CP in relation to control (P < 0.01) groups. The lowest intensities of VEGF expression in newly formed bone were shown by DFDBA and polymer groups (P < 0.05). When comparing the different grafting materials, higher MVD were found in the newly formed bone around control, HA and CP (P < 0.001).Various graft materials could be successfully used for sinus floor augmentation; however, the interactions between bone formation and angiogenesis remain to be fully characterized.

Noninvasive aspergillosis as a maxillary antrolith: report of a rare case.

Maxillary antrolithiasis is characterized by masses of tissue of endogenous or exogenous origin that calcify within the maxillary sinuses. Aspergillosis is a fungal disease in which the maxillary sinus is a primary site of infection. Aspergillosis mycetoma, its noninvasive form, is the most prevalent modality of the disease in the maxillary sinuses. In approximately half of the cases reported in the literature, calcification of the fungal mycelia, which later became antroliths, was verified. This article reports a rare case of the accidental discovery of a maxillary antrolith associated with noninvasive aspergillosis in an immunocompetent and asymptomatic 56-year-old woman. The diagnosis and therapeutic procedures used in treating the patient are discussed as well as the probable iatrogenic origin of the fungal pathology.

Estudo comparativo da reparação de membranas sinusais e da formação óssea no interior do seio maxilar em coelhos após enxertos ósseos (Sinus Lift), com selante de fibrina e membrana de colageno

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Aplicação de engenharia tecidual na elevação de seio maxilar: uma revisão sistemática da literatura

The purpose of this literature review is to present the state-of-the-art on the application of tissue engineering techniques in sinus lifts procedures, reporting the influence of these techniques in increasing bone height and volume in the maxillary sinus, and the osseointegration of the implants installed in the grafted areas. PubMed and Scopus databases were searched using the keywords “scaffold” OR “engineered tissue” AND “sinus augmention” OR “sinus floor elevation”. In the initial search 463 articles were selected, of which 19 were selected abstracts reading, with nine papers selected by the end, for evaluation of the application of tissue engineering techniques in sinus lift procedures. Despite the positive results of tissue engineering procedures in sinus floor elevation reported in the selected articles, further studies are still needed, for a better standardization of experimental models and materials used, leading to definitive conclusions about the effects of the application of tissue engineering procedures on bone formation in maxillary sinus lifting procedures.

Correlation of Fractal Dimension with Histomorphometry in Maxillary SinuLifting Using Autogenous Bone Graft

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Placement of dental implants in the maxillary tuberosity: a systematic review

The aim of this systematic review was to identify clinical studies on implants placed in the tuberosity region to determine the survival rate of these implants when compared to implants placed in other regions of the maxilla. A search for data published up until March 2014 was undertaken using the PubMed, Cochrane Library, Embase, and ScienceDirect databases. Eligible studies were selected according to inclusion and exclusion criteria. The first database search revealed 310 titles. After inclusion and exclusion criteria were applied, five studies remained for the detailed analysis. A total of 113 patients were followed for a period of 6-144 months; 289 implants were placed in the patients evaluated. There were eight failures/losses of dental implants in the tuberosity region; the overall survival rate was 94.63% for these implants. In controlled studies, the cumulative survival rates for implants placed in the maxillary tuberosity and other maxillary regions were 96.1% and 95%, respectively. In conclusion, implants placed into the maxillary tuberosity are a predictable alternative for the treatment of patients with insufficient bone volume in the maxillary region. However, randomized trials are needed to assess the effectiveness of this treatment.

Avaliação longitudinal de duas técnicas de sinus lift

The implant has high success rates and predictability in this decade. However, bone availability is a factor that may limit the installation technique of dental implants in subsequent rehabilitation of the maxillary arch has been proposed technique’s maxillary sinus lifting when it presents itself pneumatized, for installation of dental implants The aim of this paper is to present two clinical cases using the surgical technique and rehabilitation to the patient with surgery maxillary sinus lifting with the use of a biomaterial alone or in combination with autogenous bone and the prosthetic resolution radiographic and clinical follow-up of three years.

Intentional replantation for the management of maxillary sinusitis

AIM: To present a case that emphasizes the importance of the use of intentional replantation as a technique to successfully treat a periapical lesion and an odontogenic maxillary sinusitis through the alveolus at the same time. SUMMARY: This case report presents a patient with odontogenic maxillary sinusitis secondary to periapical disease of a maxillary molar that had previously received root canal treatment. The molar was extracted, with drainage and rinsing of the maxillary sinus. The apices were resected extra-orally, the retrograde cavities prepared with ultrasound and retrograde fillings of silver amalgam placed. The tooth was then replanted. After 2 years, the patient was asymptomatic, periapical radiography showed no evidence of root resorption and computed tomography scanning demonstrated the resolution of maxillary sinusitis. Key learning points: *When root canal treatment or periapical surgery cannot be undertaken or has failed, intentional replantation may be considered. *This alternative treatment may be predictable in certain cases.

Comparison of periapical radiography and limited cone-beam tomography in posterior maxillary teeth referred for apical surgery

This study compared periapical (PA) radiography and cone-beam tomography (CBT) for preoperative diagnosis in posterior maxillary teeth of consecutive patients referred for possible apical surgery. Images were concurrently analyzed by an oral radiologist and an endodontist to reach consensus in interpretation of the radiographic findings. The final material included 37 premolars and 37 molars with a total of 156 roots. CBT showed significantly more lesions (34%, p < 0.001) than PA radiography. Detecting lesions with PA radiography alone was most difficult in second molars or in roots in close proximity to the maxillary sinus floor. Additional findings were seen significantly more frequently in CBT compared with PA radiography including expansion of lesions into the maxillary sinus (p < 0.001), sinus membrane thickening (p < 0.001), and missed canals (p < 0.05). The present study highlights the advantages of using CBT for preoperative treatment planning in maxillary posterior teeth with apical pathology.