Eco-friendly luminescent hybrid materials based on EuIII and LiI co-doped chitosan

Biopolymer-based materials have been of particular interest as alternatives do synthetic polymers due to their low toxicity, biodegradability and biocompatibility. Among them, chitosan is one of the most studied ones and has recently been investigated for the application as solid state polymer electrolytes. Furthermore, it can serve as a host for luminescent species such as rare earth ions, giving rise to materials with increased functionality, of particular interest for electrochemical devices. In this study, we investigate chitosan based luminescent materials doped wit Eu3+ and Li+ triflate salts from the structural, photophysical and conductivity points of view. Because the host presents a broad emission band in the blue to green, while Eu3+ emits in the red, fine tuning of emission colour and/or generation of white light is possible by optimizing composition and excitation scheme. Europium lifetimes (5D0) are in the range 270 – 350 µs and quantum yields are as high as 2%. Although Li+ does not interfere with the luminescent properties, it grants ion-conducting properties to the material suggesting that a combination of both properties could be further explored in multifunctional device.

Influência do desponte sôbre a composição do côlmo e do caldo da cana-de-açucar, I. Var. Co 421

I. This paper deals with an experiment carried out to evaluate the effect of the sugar cane upper end on the composition of the sugar cane harvest as a raw material for the sugar industry. The variety studied was Co 421. The authors intend to study other varieties in the future. The data were collected from plant cane, at intervals of two weeks, always from the same field, from a small central area of 3.000 square meters approximately. Sixty (60) stalks were cut in each occasion, randomly chosen from the whole area. They were afterwards separated into three groups of 20 stalks, one for each of the treatments, namely: a) Complete stalks, with no leaves or sheaths. b) Stalks harvested by the technique of REYNOSO, that is, as usually done in practice. c) Stalks with the tops completely cut out, that is, cut by technique of REYNOSO and then with 3 other top internodes eliminated. The treatments caused significant differences on the following technological characteristics: a) Weight b) Cane pol c) Available sucrose (pol) per cent cane d) Cane juice pol e) Saline coefficient of juice. II. Except for weight, all changes were favorable to treatment c, even if with differences relatively slight, in percentage. IIII. Treatment differences for cane fiber, brix, reducing sugars, juice ashes, coefficient of purity and glucose coefficient were not significant. IV. Time of harvest was an important factor affecting the composition of the cane and of the juice. V. On the average the available sucrose of cane for treatments, with an standard error of 0.13%, was: Treatment c 13.05% Treatment b 12.65% Treatment a 12.53% This shows that there is no sound basis for the heavy fines applied by some sugar mills to planters who do not cut low enough the tops of the cane stalks.

Alterações cutâneas do cão no Kala-Azar sul-americano

According to E. Chagas (1938), South-American Kala Azar is a widespread disease from the jungle, several cases being reported from North Brazil (Estado do Pará: Marajó Island, Tocantins and Gurupi river valleys; Estados do Piauí and Ceará: coast and hinterland). Other cases were found in Northeast Brazil (Estados de Pernambuco, Alagôas and Sergipe: coast and hinterland; Estado da Bahia: hinterland). A few cases were described from Estado de Mato-Grosso (Brazil), Provincia de Salta and Território do Chaco (Argentine), and Zona contestada do Chaco (Paraguai-Bolívia). A well defined secondary anemia associated with enlargement of the liver and spleen are the chief symptoms. Death usually occurs in cachexia and with symptoms of heart failure. Half the patients were children aged less than ten years (CHAGAS, CASTRO & FERREIRA, 1937). Quite exhaustive epidemiological researches performed by CHAGAS, FERREIRA, DEANE, DEANE & GUIMARÃES (1938) in Municipio de Abaeté (Estado do Pará, Brazil) gave the incidence of 1.48% for the natural infection in human, 4.49% in dogs, and 2.63% in cats. The infection was arcribed (CUNHA & CHAGAS, 1937) to a new species of Leishmania (L. chagasi). Latter CUNHA (1938) state, that it is identical to L. infantum. ADLER (1940) found that so far it has been impossible to distinguish L. chagasi from L. infantum by any laboratory test but a final judgment must be reserved until further experiments with different species of sandflies have been carried out. Skin changes in canine Kala Azar were signaled by many workers, and their importance as regards the transmission of the disease is recognized by some of them (ADLER & THEODOR, 1931, 2. CUNHA, 1933). Cutaneous ulcers in naturally infected dogs are referred by CRITIEN (1911) in Malta, by CHODUKIN & SCHEVTSCHENKO (1928) in Taschkent, by DONATIEN & LESTOCQUARD (1929) and by LESTOCQUARD & PARROT (1929) in Algeria, and by BLANC & CAMINOPETROS (1931) in Greece. Depilation is signaled by YAKIMOFF & KOHL-YAKIMOFF (1911) in Tunis, by YAKIMOFF (1915) in Turkestan. Eczematous areas or a condition described as "eczema furfurace" is sometimes noted in the areas of depilation (DONATIEN & LESTOCQUARD). The skin changes noticed by ADLER & THEODOR (1932) in dogs naturally infected with Mediterranean Kala Azar can be briefly summarized as a selective infiltration of macrophages around hair follicles including the sebaceous glands and the presence of infected macrophages in normal dermis. The latter phenomenon in the complete absence of secondary infiltration of round cells and plasma cells is the most striking characteristic of canine Kala Azar and differentiates it from L. tropica. In the more advanced stages the dermis is more cellular than that of normal dogs and may even contain a few small dense areas of infiltration with macrophages and some round cells and polymorphs. The external changes, i. e., seborrhea and depilation are roughly proportional to the number of affected hair follicles. In dogs experimentally infected with South-American Kala Azar the parasites were regularly found in blocks of skin removed from the living animal every fortnight (CUNHA, 1938). The changes noticed by CUNHA, besides the presence of Leishmania, were perivascular and diffuse infiltration of the cutis with mononuclears sometimes more marked near hair follicles, as well as depilation, seborrhea and ulceration. The parasites were first discovered and very numerous in the paws. Our material was obtained from dogs experimentally infected by Dr. A. MARQUES DA CUNHA< and they were the subject of a previous paper by CUNHA (1938). In this study, however, several animals were discarded as it was found that they did develop a superimposed infection by Demodex canis. This paper deals with the changes found in 88 blocks of skin removed from five dogs, two infected with two different canine strains, and three with two distinct human strains of South-American Kala Azar. CUNHA'S valuable material affords serial observations of the cutaneous changes in Kala Azar as most of the blocks of skin were taken every fortnight. The following conclusions were drawn after a careful microscopic study. (1) Skin changes directly induced in the dog by the parasites of South-American Kala Azar may b described as an infiltration of the corium (pars papillaris and upper portion of the reticular layer) by histocytes. Parasites are scanty, at first, latter becoming very numerous in the cytoplasm of such cells. Sometimes the histocytes either embedding or not leishman bodies appear as distinct nodes of infiltration or cell aggregations (histocytic granuloma, Figs. 8 and 22) having a perivascular distribution. The capillary loops in the papillae, the vessels of the sweat glands, the subpapillary plexus, the vertical twigs connecting the superficial and deep plexuses are the ordinary seats of the histocytic Kala Azar granulomata. (2) Some of the cutaneous changes are transient, and show spontaneous tendency to heal. A gradual transformation of the histocytes either containing or not leishman bodies into fixed connective tissue cells or fibroblasts occut and accounts for the natural regression just mentioned. Figs. 3, 5, 18, 19 and 20 are good illustrations of such fibroblastic transformation of the histocytic Kala Azar granulomata. (3) Skin changes induced by the causative organism of South-American Kala Azar are neither uniform nor simultaneous. The same stage may be found in the same dog in different periods of the disease, and not the same changes take place when pieces from several regions are examined in the same moment. The fibroblastic transformation of the histocytic granulomata marking the beginning of the process of repair, e. g., was recognised in dog C, in the 196th as well as in the 213rd (Fig. 18) and 231st (Fig. 19) days after the inoculation. (4) The connective tissue of the skin in dogs experimentally infected with South-American Kala Azar is overflowed by blood cells (monocytes and lymphocytes) besides the proliferation in situ of undifferentiated mesenchymal cells. A marked increase in the number of cells specially the "ruhende Wanderzellen" (Figs. 4 and 15) is noticed even during the first weeks after inoculation (prodomal stage) when no leishman bodies are yet found in the skin. Latter a massive infiltration by amoeboid wandering cells similar to typical blood monocytes (Fig. 21) associated to a small number of lymphocytes and plasma cells (Figs. 9, 17, 21, and 24) indicates that the emigration of blood cells...

A patologia da doença de Chagas experimental no cão

Cães jovens infectados pelo Trypanosoma cruzi desenvolveram a fase aguda da infecção e foram estudados durante o 7º até o 50º dia por métodos morfológicos, parasitológicos, imunológicos e eletrocardiográficos. ocorreu intensa miocardite que se iniciava nos átrios e se propagava aos ventrículos e, quando plenamente desenvolvida, predominava no átrio direito, na metade direita do septo interventricular e na parede livre do ventrículodireito. As alterações eletrocardiográficas foram progressivas e revelavam o progressivo e predominante comprometimento atrial, mas a interferência com a propagação do estímulo (bloqueio) só apareceu nas fases terminais, coincidente com a presença de inflamação e necrose ao longo do tecido de condução. Quinze cães foram submetidos a tratamento específico e em alguns destes as modificações anátomo-patológicas e eletrocardiográficas representaram uma reversão progressiva das lesões observadas antes. Dez animais evoluíram para a fase crônica indeterminada da infecção, três deles após tratamento, e foram acompanhados por períodos de oito meses a três anos, sem que nenhum desenvolvesse sinais de insuficiência cardíaca congestiva. As alterações eletrocardiográficas observadas nestes casos foram inespecíficas e algumas arritmias apareceram transitoriamente. No sistema excito-condutor foram encontradas lesões focais de fibrose, esclero-atrofia e infiltração adiposa, as quais foram interpretadas como seqüelas deixadas pela fase aguda. A miocardite encontrada foi focal e discreta. Foi examinado para complementação o material de um caso de forma crônica cardíaca no cão, o qual exibiu miocardite difusa com fibrose focal e intersticial e sinais de atividade do processo inflamatório, além de bloqueio de ramo direito e hemibloqueio anterior esquerdo. Assim, o modelo canino da doença de Chagas reproduz todas as fases da cardiopatia, tal como aparece no homem, sendo que as formas crõnicas sintomáticas são de reprodução experimental imprevisível. O presente trabalho objetivou caracterizar os aspectos da patologia da doença de Chagas no cão, tentar as suas correlações eletrocardiográficas, os seus aspectos evolutivos, com a finalidade de fornecer elementos para estudos futuros com o referido modelo experimental.

Adesão ao tratamento por indivíduos com a co-infecção HIV/tuberculose: revisão integrativa da literatura

Trata-se de revisão integrativa cujo objetivo foi avaliar as evidências disponíveis na literatura sobre os fatores associados à adesão ao tratamento por pacientes com a co-infecção HIV/TB. Foram levantados artigos publicados no período de 2002 a 2008, nas bases de dados LILACS e MEDLINE. O material foi categorizado de acordo com ano de publicação, periódico, local do estudo e fatores relacionados à adesão. A amostra final foi composta por oito artigos. Os fatores encontrados, associados à adesão ao tratamento da co-infecção HIV/TB, relacionam-se: ao indivíduo e ao estilo de vida (tratamento prévio de TB, receio de estigma e discriminação, uso de substâncias químicas, depressão, suporte social), à doença e aos medicamentos (tipo de regime medicamentoso, uso de outros medicamentos, efeitos colaterais, dificuldade de diagnóstico de TB nestes pacientes), e aos serviços de saúde (problemas operacionais para acompanhar o tratamento, treinamento dos profissionais, supervisão, locais distintos para atendimento de TB e de HIV).

Outage probability analysis for MRC in η-μ fading channels with co-channel interference

Exact closed-form expressions are obtained for the outage probability of maximal ratio combining in η-μ fadingchannels with antenna correlation and co-channel interference. The scenario considered in this work assumes the joint presence of background white Gaussian noise and independent Rayleigh-faded interferers with arbitrary powers. Outage probability results are obtained through an appropriate generalization of the moment-generating function of theη-μ fading distribution, for which new closed-form expressions are provided.

Dispersões Aquosas de Poliuretano como Material Base para o Desenvolvimento de Sistemas de Libertação Controlada de Cetoprofeno

O cetoprofeno (ácido 2-(3-benzoilfenil) propiónico) é um anti-inflamatório não esteroidal (AINE) utilizado no tratamento de uma grande variedade de doenças inflamatórias agudas e crónicas incluindo a artrite reumatoide, osteoartrite e espondilite anquilosante. A sua administração oral prolongada está associada a diversas reações gastrointestinais, tais como irritações e ulcerações. Neste contexto, é importante desenvolver sistemas alternati-vos, nomeadamente sistemas de libertação controlada para administração oral, transdér-mica ou intradérmica. Este trabalho tem como objetivo testar a possibilidade de utilização de dispersões aquosas de poliuretano (PUDs) como material de suporte para a produção de sistemas de liberta-ção controlada de cetoprofeno. Numa primeira etapa, foram sintetizadas PUDs de base poliéster (policaprolactona, PCL) e poliéter (polipropileno-glicol, PPG) utilizando o méto-do de pré-polímero modificado. As dispersões obtidas foram caracterizadas em termos de pH, viscosidade, teor de sólidos e tamanho de partícula. Numa segunda etapa, foi testada a incorporação do cetoprofeno nas PDUs produzidas utilizando duas estratégias para incre-mentar a sua solubilidade em água: (i) utilização de um co-solvente (acetona, DMSO e HYD) e (ii) utilização de um surfactante não iónico (Tween 80). A incorporação foi testada para teores de 5% e 10% (razão fármaco/polímero, m/m). Os filmes produzidos pelo méto-do da evaporação do solvente foram avaliados quanto à sua homogeneidade e caracteriza-dos por FTIR e DSC. Numa terceira fase realizaram-se estudos de libertação em tampão de fosfato salino (PBS) de pH 7.5 tendo como objetivo avaliar a viabilidade de desenvolvimen-to de diferentes tipologias de dispositivos dependendo de um compromisso entre as pro-priedades dos filmes e o comportamento de libertação. Os resultados obtidos podem ajudar na seleção do material de base mais adequado para um determinado fim. Adicionalmente, e mais importante, comprovou-se a viabilidade de utilizar PUDs como material base para o desenvolvimento de sistemas de libertação con-trolada, utilizando como exemplo o cetoprofeno. A avaliação da toxicidade e da atividade anti-inflamatória dos filmes produzidos foi considerada estando em curso neste momento no grupo do Professor Armando Cunha Júnior.

A collagen-poly(lactic acid-co-ɛ-caprolactone) hybrid scaffold for bladder tissue regeneration.

Scaffold materials should favor cell attachment and proliferation, and provide designable 3D structures with appropriate mechanical strength. Collagen matrices have proven to be beneficial scaffolds for tissue regeneration. However, apart from small intestinal submucosa, they offer a limited mechanical strength even if crosslinking can enhance their mechanical properties. A more cell-friendly way to increase material strength is to combine synthetic polymer meshes with plastic compressed collagen gels. This work describes the potential of plastic compressed collagen-poly(lactic acid-co-ɛ-caprolactone) (PLAC) hybrids as scaffolds for bladder tissue regeneration. Human bladder smooth muscle and urothelial cells were cultured on and inside collagen-PLAC hybrids in vitro. Scaffolds were analyzed by electron microscopy, histology, immunohistochemistry, and AlamarBlue assay. Both cell types proliferated in and on the hybrid, forming dense cell layers on top after two weeks. Furthermore, hybrids were implanted subcutaneously in the backs of nude mice. Host cell infiltration, scaffold degradation, and the presence of the seeded bladder cells were analyzed. Hybrids showed a lower inflammatory reaction in vivo than PLAC meshes alone, and first signs of polymer degradation were visible at six months. Collagen-PLAC hybrids have potential for bladder tissue regeneration, as they show efficient cell seeding, proliferation, and good mechanical properties.

Photosynthesis and Rubisco kinetics in spring wheat and meadow fescue under conditions of simulated climate change with elevated CO[sub 2] and increased temperatures

Selostus: Kevätvehnän ja nurminadan fotosynteesi ja Rubisco-kinetiikka simuloidun ilmastonmuutoksen eli kohotetun hiilidioksidipitoisuuden ja kohotetun lämpötilan oloissa

Simulation of spring wheat responses to elevated CO‚́‚ and temperature by using CERES-wheat crop model

Selostus: Kohotettujen CO‚́‚:n ja lämpötilan vaikutukset kevätvehnän fenologiseen kehitykseen ja sadontuottomahdollisuuksiin

Survival in soil and detection of co-transformed Trichoderma harzianum by nested PCR

The objective of this work was to evaluate the survival of two Trichoderma harzianum co-transformants, TE 10 and TE 41, carrying genes for green fluorescent protein (egfp) and for resistance to benomyl, during four weeks in a contained soil microcosm. Selective culture media were used to detect viable fungal material, whose identity was confirmed by the observation of the fluorescent phenotype by direct epifluorence microscopy. PCR using two nested primer pairs specific to the egfp gene was also used to detect the transformed fungi. Although it was not possible to reliably detect the egfp gene directly from soil extracts, an enrichment step involving selective culture of soil samples in liquid medium prior to DNA extraction enabled the consistent detection of the T. harzianum co-transformants by nested PCR for the duration of the incubation period.

Effects of rotation period on biomass production and atmospheric CO‚́‚ emissions from broadleaved stands growing on abandoned farmland

Abstract

Formation and Control of Trace Metal Emissions in Co-Firing of Biomass, Peat, and Wastes in Fluidised Bed Combustors

Environmentally harmful consequences of fossil fuel utilisation andthe landfilling of wastes have increased the interest among the energy producers to consider the use of alternative fuels like wood fuels and Refuse-Derived Fuels, RDFs. The fluidised bed technology that allows the flexible use of a variety of different fuels is commonly used at small- and medium-sized power plants ofmunicipalities and industry in Finland. Since there is only one mass-burn plantcurrently in operation in the country and no intention to build new ones, the co-firing of pre-processed wastes in fluidised bed boilers has become the most generally applied waste-to-energy concept in Finland. The recently validated EU Directive on Incineration of Wastes aims to mitigate environmentally harmful pollutants of waste incineration and co-incineration of wastes with conventional fuels. Apart from gaseous flue gas pollutants and dust, the emissions of toxic tracemetals are limited. The implementation of the Directive's restrictions in the Finnish legislation is assumed to limit the co-firing of waste fuels, due to the insufficient reduction of the regulated air pollutants in the existing flue gas cleaning devices. Trace metals emission formation and reduction in the ESP, the condensing wet scrubber, the fabric filter, and the humidification reactor were studied, experimentally, in full- and pilot-scale combustors utilising the bubbling fluidised bed technology, and, theoretically, by means of reactor model calculations. The core of the model is a thermodynamic equilibrium analysis. The experiments were carried out with wood chips, sawdust, and peat, and their refuse-derived fuel, RDF, blends. In all, ten different fuels or fuel blends were tested. Relatively high concentrations of trace metals in RDFs compared to the concentrations of these metals in wood fuels increased the trace metal concentrations in the flue gas after the boiler ten- to hundred-folds, when RDF was co-fired with sawdust in a full-scale BFB boiler. In the case of peat, lesser increase in trace metal concentrations was observed, due to the higher initial trace metal concentrations of peat compared to sawdust. Despite the high removal rate of most of the trace metals in the ESP, the Directive emission limits for trace metals were exceeded in each of the RDF co-firing tests. The dominat trace metals in fluegas after the ESP were Cu, Pb and Mn. In the condensing wet scrubber, the flue gas trace metal emissions were reduced below the Directive emission limits, whenRDF pellet was used as a co-firing fuel together with sawdust and peat. High chlorine content of the RDFs enhanced the mercuric chloride formation and hence the mercury removal in the ESP and scrubber. Mercury emissions were lower than theDirective emission limit for total Hg, 0.05 mg/Nm3, in all full-scale co-firingtests already in the flue gas after the ESP. The pilot-scale experiments with aBFB combustor equipped with a fabric filter revealed that the fabric filter alone is able to reduce the trace metal concentrations, including mercury, in the flue gas during the RDF co-firing approximately to the same level as they are during the wood chip firing. Lower trace metal emissions than the Directive limits were easily reached even with a 40% thermal share of RDF co-firing with sawdust.Enrichment of trace metals in the submicron fly ash particle fraction because of RDF co-firing was not observed in the test runs where sawdust was used as the main fuel. The combustion of RDF pellets with peat caused an enrichment of As, Cd, Co, Pb, Sb, and V in the submicron particle mode. Accumulation and release oftrace metals in the bed material was examined by means of a bed material analysis, mass balance calculations and a reactor model. Lead, zinc and copper were found to have a tendency to be accumulated in the bed material but also to have a tendency to be released from the bed material into the combustion gases, if the combustion conditions were changed. The concentration of the trace metal in the combustion gases of the bubbling fluidised bed boiler was found to be a summary of trace metal fluxes from three main sources. They were (1) the trace metal flux from the burning fuel particle (2) the trace metal flux from the ash in the bed, and (3) the trace metal flux from the active alkali metal layer on the sand (and ash) particles in the bed. The amount of chlorine in the system, the combustion temperature, the fuel ash composition and the saturation state of the bed material in regard to trace metals were discovered to be key factors affecting therelease process. During the co-firing of waste fuels with variable amounts of e.g. ash and chlorine, it is extremely important to consider the possible ongoingaccumulation and/or release of the trace metals in the bed, when determining the flue gas trace metal emissions. If the state of the combustion process in regard to trace metals accumulation and/or release in the bed material is not known,it may happen that emissions from the bed material rather than the combustion of the fuel in question are measured and reported.

Aluminium fouling and its impact on activated carbon based dioxin and furan removal in a wet scrubber at a co-incineration plant

Dioxins and furans, PCDD/Fs, are highly toxic substances formed in post combustion zones in furnaces. PCDD/F emissions are regulated by a waste incineration directive which relates also to co-incineration plants. Several observations of dioxin and furan enhancements in wet scrub- bers have been reported previously. This is thought to be due to the so-called "memory effect" which occurs when dioxins and furans absorb into plastic material in scrubbers and desorb when ambient circumstances alter significantly. At the co-incineration plant involved, dioxins and furans are controlled with a wet scrubber, the tower packing of which is made of plastic in which activated carbon particles are dispersed. This should avoid the memory effect and act as a dioxin and furan sink since dioxins and furans are absorbed irreversibly into the packing ma- terial. In this case, the tower packing in the scrubber is covered with a white layer that has been found to be mainly aluminium. The aim of this thesis was to determine the aluminium balance and the dioxin and furan behaviour in the scrubber and, thus, the impacts that the foul- ing has on dioxin and furan removal. The source of aluminium, reasons for fouling and further actions to minimize its impacts on dioxin and furan removal were also to be discovered. Measurements in various media around the scrubber and in fuels were made and a profile analysis of PCDD/F and mass balance calculations were carried out. PCDD/F content de- creased in the scrubber. The reduced PCDD/F was not discharged into scrubbing water. The removal mechanism seems to work in spite of the fouling, at least with low PCDD/F loads. Most of the PCDD/F in excess water originates from the Kymijoki River which is used as feeding water in the scrubber. Fouling turned out to consist mainly of aluminium hydroxides. Sludge combusted in the furnace was found to be a significant source of aluminium. Ways to minimize the fouling would be adjustment of pH to a proper lever, installation of a mechanical filter to catch the loose material from the scrubbing water and affecting the aluminium content of the sludge.