Temperature effect on seed germination in Canna indica L. (Cannaceae)

Comm indica L. is an herbaceous species with ornamental and medicinal value, having seeds with a hard seed coat. This study aimed to test the influence of constant temperatures ranging from 5 to 45 C, at 5 C intervals, on the germination of scarified seeds. Data obtained were analyzed through the model of enthalpy of activation in order to obtain the optimum temperature range for germination. The species showed seed germinability in a wide temperature range (10-40 degrees C) being the optimal temperature range between 13.84 and 34.41 degrees C, determined by the enthalpy of activation.

Propagação vegetativa de Tamarindus indica L

Pós-graduação em Agronomia - FEIS

Plant iononne diagnosis using sound balances: case study with mango (Mangifera Indica)

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Influence of soil water potential in the action of herbicides on goosegrass (Eleusine indica (L) Gaertn)

Currently, the use of herbicides is essential in a practical and common in agricultural areas, but efficiency of these herbicides can be compromised when applied on plants that thrive in water deficit conditions, due to low uptake and translocation of the product. Therefore, the aim of this study was to compare the efficiency of control ACCase inhibiting herbicides applied post-emergence in plants of Eleusine indica under different soil water contents. The experiment was conducted in a greenhouse and the experimental design was completely randomized design with four replications, consisting of a 9x4 factorial, with the combination of three soil water potentials (-0.03, -0.07 and -1.5 MPa) three herbicides (fluazifop-p -butyl, haloxyfop-methyl and sethoxydim + oil) and four doses (0, 25, 50, and 100 % of the recommended dose). Herbicide application was made in plants in vegetative stage 2-3 tillers. The soil water potential was initiated in the development stage of two leaves, and the water was supplemented until the soil reaches the potential of -0.01 MPa, when it came to minimum pre-determined for each water management. The physiological parameters evaluated were: photosynthetic rate, stomatal conductance, transpiration leaf temperature and plant dry mass. The visual assessments of phytotoxicity were performed at 7 and 14 days after application. The herbicides behaved in different ways according to the used water management. In severe water stress conditions (soil moisture at 8%) only fluazifop-p-butyl herbicide achieved satisfactory control (> 90%) in E. indica plants.

Physical-chemical, thermal, and functional properties of achira (Canna indica L.) flour and starch from different geographical origin

Achira (Canna indica L.) is a plant native to the Andes in South America, a starchy source, and its cultivation has expanded to different tropical countries, like Brazil. In order to evaluate the potential of this species, starch and flours with different particle size were obtained from Brazilian achira rhizomes. Proximal analyses, size distribution, SEM, swelling power, solubility, DSC, XRD analysis, and FTIR were performed for characterization of these materials. Flours showed high dietary fiber content (16.532.2% db) and high concentration of starch in the case of the smaller particle size fraction. Significant differences in protein and starch content, swelling power, solubility, and thermal properties were observed between the Brazilian and the Colombian starch. All the studied materials displayed the B-type XRD pattern with relative crystallinity of 20.1% for the flour and between 27.0 and 28.0% for the starches. Results showed that the starch and flour produced from achira rhizomes have great technological potential for use as functional ingredient in the food industry.

Potencial del cultivo de la chumbera (Opuntia ficus-indica (L) Miller) para la obtención de biocombustibles

El presente trabajo trata sobre el potencial del cultivo de chumbera (Opuntia ficus-indica (L) Miller) para la obtención de dos biocombustibles: bioetanol y biogás. Para lograr este objetivo se ha estudiado, por una parte, el empleo de procedimientos orientados a la producción de bioetanol no celul��sico a partir de cladodios de chumbera, lo que ha dado como resultado rendimientos de entre 156 y 221 litros de etanol por cada tonelada de materia seca de biomasa, y, por otra, la obtención de biogás mediante la digestión anaeróbica de los mismos en régimen mesófilo, donde se han hallado rendimientos en torno a 198 m3 de metano por tonelada de materia seca. Una vez determinado el potencial de la materia prima se han diseñado procesos para una escala industrial que permitan la transformación de los cladodios de chumbera en ambos biocombustibles y se han determinado sus balances energéticos, los cuales han dado como resultado la autosuficiencia de ambos procesos, obteniéndose, además, un excedente térmico de 1.235 kcal L-1 de etanol producido, y en torno a 140 kep de energía total (térmica + el��ctrica) por tonelada de materia seca empleada en la digestión anaeróbica. Por último se ha estimado el potencial de producción de ambos combustibles en un área apta para el cultivo de la chumbera. En concreto, este estudio se ha llevado a cabo para la provincia de Almería, elegida por tratarse de una zona con cierta tradición en el manejo de esta planta y presentar un clima semiárido mediterráneo. La superficie apta para el cultivo de la chumbera en esta provincia se ha estimado en 100.616 ha y el rendimiento medio del cultivo en 5 t MS ha-1 año-1. En el caso del bioetanol esto implicaría un potencial de producción en torno a 82.158 m3 año-1 que podrían dar lugar a la creación de dos macrodestilerías (con una producción de 100.000 L diarios) o de 49 microdestilerías (con 5.000 L diarios de producción). Si se optara por la transformación de la biomasa de chumbera en metano, podrían obtenerse 99,4 M de metros cúbicos, lo cual permitiría el establecimiento de 79 plantas de cogeneración de 500 kW cada una. ABSTRACT The present work deals with the potential of prickly pear (Opuntia ficus-indica (L) Mill.) biomass as a feedstock for bioethanol and biogas. In order to reach this objective different procedures aiming at the production of non-cellulosic bioethanol from cladodes were carried out; yields from156 to 221 litres of bioethanol per ton of dry matter were found. Mesophilic anaerobic digestion of cladodes was also studied and yields around 198 m3 of methane per ton of dry matter were reached. From these results, processes on an industrial scale were designed for both pathways of energy conversion of prickly-pear biomass and the respective energy balances were calculated. They resulted to be self-sufficient from an energetic point of view; the bioethanol pathway generated a thermal energy surplus of 1,235 kcal per litre of ethanol, while around 140 kep of total energy (heat + electricity) were obtained from the anaerobic digestion of one ton of dry cladodes. Finally, the potential production of both biofuels from prickly pear biomass was estimated for a specific area. The province of Almeria was chosen because of its climate conditions and the previous existence of prickly pear plantations. The area suitable for prickly pear cultivation in the province was estimated at a maximum of 100.616 ha, with an average yield of about 5 t DM ha-1 year-1. If prickly pear biomass were cropped for bioethanol in Almeria, the potential production of bioethanol could reach 82,158 m3 year-1, in either two macrodistilleries (100,000 L day-1) or 49 microdestilleries (5,000 L day-1). If the biogas pathway were preferred, 99. 4 Mm3 of methane could be reached and this would represent 79 CHP plants (500 kW each one).

Obtenção de extratos da Opuntia fícus-indica L. Mill e suas aplicações em formulações cosméticas: avaliação in vivo do sensorial e da eficácia hidratante

Opuntia fícus - indica (L.) Mill is a cactacea presents in the Caatinga ecosystem and shows in its chemical c omposition flavonoids, galacturonic acid and sugars. Different hydroglicolic (EHG001 and EHG002) and hydroethanolic subsequently lyophilized (EHE001 and EHE002) extracts were developed. The EHE002 had his preliminary phytochemical composition investigated by thin layer chromatography (TLC) and we observed the predominance of flavonoids. Different formulations were prepared as emulsions with Sodium Polyacrylate (and) Hydrogenated Polydecene (and) Trideceth - 6 (Rapithix® A60), and Polyacrylamide (and) C13 - 14 I soparaffin (and) Laureth - 7 (Sepigel�� 305), and gel with Sodium Polyacrylate (Rapithix® A100). The sensorial evaluation was conducted by check - all - that - apply method. There were no significant differences between the scores assigned to the formulations, howe ver, we noted a preference for those formulated with 1,5% of Rapithix® A100 and 3,0% of Sepigel�� 305. These and the formulation with 3% Rapithix® A60 were tested for preliminary and accelerated stability. In accelerated stability study, samples were stored at different temperatures for 90 days. Organoleptic characteristics, the pH values and rheological behavior were assessed. T he emulsions formulated with 3,0% of Sepigel�� 305 and 1,5% of Rapithix® A60 w ere stable with pseudoplastic and thixotropic behavior . The moisturizing clinical efficacy of the emulsions containing 3,0% of Sepigel�� 305 containing 1 and 3% of EHG001 was performed using the capacitance method (Corneometer®) and transepidermal water lost – TEWL evaluation ( Tewameter®). The results showed t hat the formulation with 3% of EHG001 increased the skin moisturizing against the vehicle and the extractor solvent formulation after five hours. The formulations containing 1 and 3% of EHG001 increased skin barrier effect by reducing transepidermal water loss up to four hours after application.

Desenvolvimento e caracterização de nanoemulsões cosméticas contendo extrato de Opuntia ficus-indica L. Mill e avaliação in vivo da eficácia hidratante

Nanoemulsions are emulsified systems, characterized for reduced droplet size (50- 500nm), which the main characteristic are kinect stability and thermodynamic instability. These are promising systems on cosmetic area due to their droplet size that provide different advantages when compared to conventional systems, among others, larger surface area and better permeability. The Opuntia ficus-indica (L.) Mill is a plant cultivated on Caatinga Brazilian biome, which has great socioeconomic importance to region. This plant shows carbohydrates utilized for cosmetic industry as moisturizing active in their chemical composition. The aim of study was to develop, characterize, evaluate stability and moisturizing efficacy of cosmetic nanoemulsions added to Opuntia ficus-indica (L.) Mill extract. Nanoemulsions preparation was made using a low energy method. Different nanoemulsions were formulated varying the ratio of oil, water and surfactant phases beyond xanthan gum (0.5% e 1%) and Opuntia ficus-indica (L.) Mill hydroglycolic extract addition on 1% and 3%. Obtained nanoemulsions were submitted to preliminary and accelerated stability tests. The evaluated parameters monitored were: macroscopic aspect, pH value, droplet size, zeta potential and polydispersion index, during 60 days on different temperatures. Stable formulations were submitted to moisturizing efficacy assessment by capacitance and transepidermal water loss methodologies during 5 hours. Stable samples were white and showed homogeneous and fluid aspect, pH value was inside ideal range (4,5-6,0) to topical application and droplet size under 200nm characterizing these system as nanoemulsions. Developed nanoemulsions did not decrease transepidermal water loss, however increased the water content on stratum corneum, highlighting the nanoemulsions containing 0.5% of xanthan gum and 1% of hydroglycolic extract. This work presents cosmetic moisturizing nanoemulsions composed to vegetal raw material from Brazilian Caatinga with potential to be used on cosmetic area.

Ação Sacietogênica de um inibidor de tripsina da semente de tamarindo (Tamarindus indica L.)

The seeds are excellent sources of proteinase inhibitors and have been highlighted owing to various applications. Among these applications are those in effect on food intake and weight gain that stand out because of the increasing number of obese individuals. This study evaluated the effects of trypsin inhibitor present in the seed of tamarind (Tamarindus indica L.) reduction in weight gain, biochemical and morphological alterations in Wistar rats. For this, we partially purified a trypsin inhibitor tamarind seed. This inhibitor, ITT2 at a concentration of 25 mg / kg body weight, over a period of 14 days was able to reduce food intake in rats (n = 6) by approximately 47%, causing a reduction in weight gain approximately 70% when compared with the control group. With the evaluation of the in vivo digestibility was demonstrated that the animals lost weight due to satiety, presented by the reduction of food intake, since there were significant differences between true digestibility for the control group (90.7%) and the group treated with inhibitor (89.88%). Additionally, we checked the deeds of ITT2 on biochemical parameters (glucose, triglycerides, total cholesterol, high-density lipoprotein, low-density lipoprotein, glutamic-pyruvic transaminase, glutamic oxaloacetic transaminase, gamma glutamyl transferase albumin, globulin, total protein and C-reactive protein) and these, when assessed in the study groups showed no statistically significant variations. We also evaluate the histology of some organs, liver, stomach, intestine, and pancreas, and showed no changes. And to evaluate the effect of trypsin inhibitor on food intake due to the satiety is regulated by cholecystokinin (CCK) were measured plasma levels, and it was observed that the levels of CCK in animals receiving ITT2 were significantly higher ( 20 + 1.22) than in animals receiving only solution with casein (10.14 + 2.9) or water (5.92 + 1.15). Thus, the results indicate that the effect caused ITT2 satiety, reducing food intake, which in turn caused a reduction in weight gain in animals without causing morphological and biochemical changes, this effect caused by the elevation of plasma levels CCK

Evaluación del efecto de un recubrimiento a base de ceras en la calidad microbil��gica y fisicoquímica en Mango (Mangifera indica)

Se fundamentó en evaluar el efecto del descubrimiento a bases de ceras (resina de colofonia y polietileno) en la calidad del mango (Mangifera indica). Las variedades utilizadas fueron: Tommy Atkins y Panades; procedente de los municipios de Suchitoto y Guazapa, en estado de madurez 3/4. Se realizó análisis micribiol��gico inicial (Salmonela, spp y Escherichia coli), para determinar si los mangos cumpl��an con los criterios microbiol��gicos de inocuidad establecidos en el grupo 4.1 del Reglamento Técnico Centroamericano, Criterios Microbiol��gicos para la Inocuidad de Alimentos. Los frutos se dividieron en cuatro bloques, dos bloques recubiertos fueron recubiertos por aspersión, con un formulario compuesto con una mezcla de cera; reconocida en el mercado como Teycer C Cp, y dos bloques sin recubrir. Todos los bloques se colocaron en bandejas pl��sticas a una temperatura de 10°C y cada cuatro días, hasta el día 36 fueron medidos parámetros físicoquímicos de calidad entre (sólidos solubles totales, acidez titulable, pérdida de peso e índice de maduración)y análisis microbiol��gicos (identificación de la presencia de Colletotrichum gloesporioides, Penicillium spp). Los resultados obtenidos fueron sometidos a un análisis de varianza, considerando como causas de variación el tiempo y el tratamiento aplicado para una condición de almacenamiento. Los valores medios significativamente diferentes, se compararon a través de pruebas de rangos múltiples, mediante el sistema de programa para el análisis estadísticos IBM SPSS Statics 23, para una probabilidad del 75%. El recubrimiento de cera es una tecnología postcosecha que permite prolongar la vida útil, mejorar la calidad y generar valor agregado al mango ya que se ha logrado extender la vida comercial del producto y mejorar su apariencia; debido a que esta tecnología actúa como una atmósfera modificada, que hace que los procesos metabólicos de la fruta se realicen de una manera gradual.

Biocompósitos poliméricos obtidos a partir da fração lignocelul��sica e amil��cea do caroço de manga (mangifera indica), Tommy atkins

This employment has the function the utilization of mango seeds Tommy Atkins, like starch source to obtain biopolymers and fibers source and nanowhiskers cellulose also, that will be use like reinforcing fillers in micro and nanobiocomposites polymeric. The fibers in natura removed from tegument mango seed were characterized, as weel as the treated fibers and nanowhiskers of cellulose extracted from them. The starch extracted from seed s almond showed a good performance (32%) and a high purity. The chemicals analyzes, of crystallinity and morphological of the fibers in natura, treated fibers and nanowhiskers of cellulose confirmed the efficacy of the chemical treatement performed to remove amorphous constituents (hemicellulose and lignina). The thermoplastic starch (TPS) obtained from two sources, corn starch and starchy material mango, was produced in a twin screw extruder with compositon mass of 62,5% of starch, 9,4% of water and 28,1% of glycerol. The starch material mango was the main objective of this work for the production of biodegradable materials, and the starch corn was utilized during the production stage to evaluate the processability of the starch and use as parameter for comparison, according of being a conventional source for obtaining conventional comercial starch. The incorporation of fibers (6% in mass) and nanowhiskers cellulose (1% in mass) in matrix of TPS to obtain composite and nanocomposite, respectively, it was performed in single screw extruder. The biocomposites and bionanocomposites polymeric were obtained and the TPS from starchy material mango presented better results of thermal and mechanicals properties when compared to TPS corn starch. Concludes that the sediment generated of the agroindustrial processing mango used presents potencial to producing of biodegradables materials

ABOVE-GROUND BIOMASS ESTIMATION OF OPUNTIA FICUS-INDICA (L.) MILL. FOR FORAGE CROP IN A MEDITERRANEAN ENVIRONMENT BY USING NON-DESTRUCTIVE METHODS

In marginal lands Opuntia ficus-indica (OFI) could be used as an alternative fruit and forage crop. The plant vigour and the biomass production were evaluated in Portuguese germplasm (15 individuals from 16 ecotypes) by non-destructive methods, 2 years following planting in a marginal soil and dryland conditions. Two Italian cultivars (Gialla and Bianca) were included in the study for comparison purposes. The biomass production and the plant vigour were estimated by measuring the cladodes number and area, and the fresh (FW) and dry weight (DW) per plant. We selected linear models by using the biometric data from 60 cladodes to predict the cladode area, the FW and the DW per plant. Among ecotypes, significant differences were found in the studied biomass-related parameters and several homogeneous groups were established. Four Portuguese ecotypes had higher biomass production than the others, 3.20 Mg ha−1 on average, a value not significantly different to the improved ‘Gialla’ cultivar, which averaged 3.87 Mg ha−1. Those ecotypes could be used to start a breeding program and to deploy material for animal feeding and fruit production.

Caraterização e avaliação de populações portuguesas de Opuntia ficus-indica (L.) Miller

Em solos de menor aptidão agrícola a figueira da-índia tem interesse como cultura alternativa, quer para a produção de fruto quer como espécie forrageira. Foram caracterizados e avaliados, quanto ao vigor vegetativo e produção de biomassa, por métodos não destrutivos e nos dois primeiros anos apos a plantação, 16 ecótipos portugueses e duas variedades italianas (“Gialla” e “Bianca”) de figueira-da-índia (Opuntia ficus-indica (L.) Miller). A produção de biomassa e vigor vegetativo foram aferidos através da determinação do número de cladódios, área de cladódios e peso verde por planta. Através da análise biométrica de 180 cladódios, foram estabelecidos modelos lineares para a quantificação não destrutiva da área de cladódios e do peso verde por planta. Não foi possível estabelecer um modelo linear para a quantificação não destrutiva da matéria seca.

CARACTERIZAÇÃO E AVALIAÇÃO DE POPULAÇÕES PORTUGUESAS DE FIGUEIRA-DA-ÍNDIA Opuntia ficus-indica (L.) Mill

A figueira-da-índia (Opuntia ficus-indica (L.) Mill.) é uma espécie com interesse para alimentação humana e animal, particularmente em áreas geográficas onde a disponibilidade de água é um fator limitante na atividade agrícola. Sendo considerada uma planta forrageira alternativa, pode produzir mais de 10 toneladas de matéria seca por hectare e, em condições limitantes de disponibilidade hídrica, supera as plantas C4 e C3 (Andrade-Montemayor et al., 2011). Acrescem ainda outras utilizações como sejam o controlo de erosão de solos, a constituição de barreiras anti-incêndio e a produção de biogás (Jigar et al., 2011, Sánchez et al., 2012). No contexto atual em que, por parte de alguns agricultores, renasceu o interesse por esta espécie, consideramos ser importante a caracterização e avaliação biométrica de populações portuguesas de O. ficus-indica e a sua comparação com variedades melhoradas, quer com o objetivo da produção de fruto para alimentação humana, quer como planta forrageira. Em maio de 2012 foram plantados, na Escola Superior Agrária de Castelo Branco (39º 49' 17.00''N; 7º 27' 41.00''W), num solo de baixa aptidão agrícola, cladódios de dezasseis populações portuguesas de O. ficus-indica, provenientes de diferentes locais e duas variedades italianas (Gialla e Bianca).

Avaliação de ecótipos de figueira-da-índia [Opuntia ficus-indica L. (Miller)] para produção de fruto

A figueira-da-índia [Opuntia ficus-indica (L.) Miller] é uma espécie da família Cactaceae, com centro de origem e domesticação no México. Possui características morfofisiol��gicas particulares que permitem uma elevada eficiência de utilização da água. Esta espécie representa uma cultura alternativa para as regiões do interior de Portugal onde se prevê que as alterações climáticas possam vir a ter maior impacto. Em Maio de 2012 foram plantados, na Escola Superior Agrária de Castelo Branco num solo de baixa aptidão agrícola, cladódios de dezasseis ecótipos portugueses de O. ficus-indica e duas variedades italianas (“Gialla” e “Bianca”). O delineamento experimental consistiu em blocos casualizados completos com três repetições. O compasso foi de 2,5 x 1,5, com 15 plantas por população e um cladódio por cova. Previamente à plantação foi realizada a fertilização com adubo ternário, na proporção de 40 kg/ha de cada macronutriente (N, P e K). O ensaio foi conduzido em sequeiro nos dois primeiros anos, tendo sido fornecidos aproximadamente 70 mm de água no terceiro ano. Foi realizado o controlo mecânico de infestantes, sem mobilização do solo. As populações foram avaliadas no terceiro ano após a plantação tendo sido quantificada a produção média de frutos por planta (kg), número de frutos e classes de peso do fruto. Relativamente aos parâmetros estudados, verificou-se a existência de diferenças significativas entre as populações. As variedades “Gialla” e “Bianca” foram as mais produtivas destacando-se nitidamente dos ecótipos portugueses, o que reflete a sua origem como material vegetal melhorado. Ainda assim, entre as dezasseis populações portuguesas de O. ficus-indica, foi eleito um pequeno grupo de ecótipos com interesse para produção de fruto e que poderá constituir material de partida para iniciar um programa de melhoramento desta espécie.