Evidence of growth and sector zoning in hydrothermal quartz from Alpine veins

Several quartz crystals from three different Alpine vein localities and of known petrologic setting and evolution have been examined for possible elemental sector zoning in order to help to constrain the mechanisms of such trace element incorporation. Using different in situ techniques (EMPA, LA-ICPMS, SIMS, FTIR-spectroscopy), it was established that Al and Li concentrations can exceed several hundreds of ppma for distinct growth zones within crystals formed at temperatures of about 300 degrees C or less and that also display patterns of cyclic growth when examined with cathodoluminescence. In contrast, crystals formed at temperatures closer to 400 degrees C and without visible cyclic growth have low concentrations of Al and Li as well as other trace elements. Al and Li contents are correlated along profiles measured within the crystals and in general their proportion does not change along the profiles. No relationships were found between Al, Na, and K, and germanium has a qualitative relationship with Al. FTIR spectra also show OH(-) absorption bands within the quartz, with higher amplitudes in zones rich in Al and Li. Sector zoning is present. It is most pronounced between prismatic and rhombohedral faces of the same growth zone, but also between the rhombohedral faces of r and z, which contain different amounts of trace elements. The sector zoning is also expressed by changes in the Li/Al ratio, with higher ratios in 17 compared to r faces. It is concluded that the incorporation of trace elements into hydrothermal quartz from Alpine veins is influenced by growth mechanisms and surface-structures of the growing quartz crystals, the influence of which may change as a function of temperature, pH, as well as the chemical composition of the fluid.

An attempt to refine rockfall hazard zoning based on the kinetic energy, frequency and fragmentation degree

Rockfall hazard zoning is usually achieved using a qualitative estimate of hazard, and not an absolute scale. In Switzerland, danger maps, which correspond to a hazard zoning depending on the intensity of the considered phenomenon (e.g. kinetic energy for rockfalls), are replacing hazard maps. Basically, the danger grows with the mean frequency and with the intensity of the rockfall. This principle based on intensity thresholds may also be applied to other intensity threshold values than those used in Switzerland for rockfall hazard zoning method, i.e. danger mapping. In this paper, we explore the effect of slope geometry and rockfall frequency on the rockfall hazard zoning. First, the transition from 2D zoning to 3D zoning based on rockfall trajectory simulation is examined; then, its dependency on slope geometry is emphasized. The spatial extent of hazard zones is examined, showing that limits may vary widely depending on the rockfall frequency. This approach is especially dedicated to highly populated regions, because the hazard zoning has to be very fine in order to delineate the greatest possible territory containing acceptable risks.

Creative accounting: Some ethical issues of macro- and micro-manipulation

This paper examines two principal categories of manipulative behaviour. The term'macro-manipulation' is used to describe the lobbying of regulators to persuadethem to produce regulation that is more favourable to the interests of preparers.'Micro-manipulation' describes the management of accounting figures to produce abiased view at the entity level. Both categories of manipulation can be viewed asattempts at creativity by financial statement preparers. The paper analyses twocases of manipulation which are considered in an ethical context. The paperconcludes that the manipulations described in it can be regarded as morallyreprehensible. They are not fair to users, they involve an unjust exercise ofpower, and they tend to weaken the authority of accounting regulators.

New evidence on inflation persistence and price stickiness in the Euro area: Implications for macro modelling

This paper evaluates new evidence on price setting practices and inflation persistence in the euro area with respect to its implications for macro modelling. It argues that several of the most commonly used assumptions in micro-founded macro models are seriously challenged by the new findings.

Invertebrados Macro-Bentónicos de área de Pisco, Perú

Entre 1978 y 1987 se realizaron muestreos de la macrofauna bentónica en 10 localidades del litoral y 14 estaciones del sublitoral, en el área de Pisco, Perú. Se diferenciaron ocho biotopos, en los que se hallaron un total de 330 taxones (excluyendo Nematoda), de los cuales 305 fueron determinados por los menos hasta el nivel genérico. El total de taxa está agrupado en 145 familias, 43 órdenes y 15 phyla, e incluye 112 Mollusca, 104 Annelida, 75 Crustacea y 39 taxa pertenecientes a otros grupos taxonómicos. Exclusivamente en fondos y orillas rocasas se encontraron 158 taxa. Considerando solamente los moluscos, poliquetos y crustáceos, con el presente estudio se incrementa de 103 a 289 el número de taxa registradas para el área investigada.

Macro e micromorfologia de ferricretes nodulares desenvolvidos de arenito do grupo Bauru, formação Adamantina

Nas paisagens do norte do estado de São Paulo, sob domínio do Planalto Ocidental, ferricretes ocorrem em diferentes níveis topográficos e, apesar de pouco documentados, constituem feições que se repetem com freqüência sobre os arenitos cretácicos do Grupo Bauru, Formação Adamantina. Realizou-se um estudo morfológico, em diferentes escalas de observação, a fim de elucidar a gênese desses ferricretes (plintita e petroplintita) encontrados no terço inferior de uma vertente dominada por solos com B textural. A área estudada localiza-se na Estação Experimental de Agronomia de Pindorama, do Instituto Agronômico de Campinas (IAC), região norte do estado de São Paulo. Dois perfis foram selecionados para a descrição morfológica detalhada e para as observações micromorfológicas com lupa binocular e microscópio petrográfico. As evidências macro e micromorfológicas dos ferricretes revelam uma origem associada à lixiviação do ferro ferroso a montante da paisagem e reprecipitação na zona de vadosa. Esses ferricretes apresentaram diferentes fábricas internas, a maioria dos quais com estruturas de degradação, evidenciando o desmantelamento atual da couraça. As diferenças nas fábricas internas estão relacionadas com a distribuição do esqueleto e do plasma: alguns apresentam esqueleto bem selecionado, com predominância de areia muito fina, enquanto em outros predomina a areia média; outros, ainda, mostram esqueleto pouco selecionado, assemelhando-se ao fundo matricial interglebular; a maioria mostra alguns volumes ocupados apenas por plasma. Demonstra-se que fatores pedo-lito-biológicos estão envolvidos nessa diversidade entre ferricretes de um mesmo horizonte, formando in situ glébulas tão distintas em suas fábricas, que podem ser erroneamente interpretadas como provenientes de diferentes locais da paisagem, transportadas e depositadas nas baixas encostas durante a gênese dos ferricretes.

Method to assess and optimise dependability of complex macro-systems: application to a railway signalling system

Achieving a high degree of dependability in complex macro-systems is challenging. Because of the large number of components and numerous independent teams involved, an overview of the global system performance is usually lacking to support both design and operation adequately. A functional failure mode, effects and criticality analysis (FMECA) approach is proposed to address the dependability optimisation of large and complex systems. The basic inductive model FMECA has been enriched to include considerations such as operational procedures, alarm systems. environmental and human factors, as well as operation in degraded mode. Its implementation on a commercial software tool allows an active linking between the functional layers of the system and facilitates data processing and retrieval, which enables to contribute actively to the system optimisation. The proposed methodology has been applied to optimise dependability in a railway signalling system. Signalling systems are typical example of large complex systems made of multiple hierarchical layers. The proposed approach appears appropriate to assess the global risk- and availability-level of the system as well as to identify its vulnerabilities. This enriched-FMECA approach enables to overcome some of the limitations and pitfalls previously reported with classical FMECA approaches.

Atributos Físicos, Macro e Micromorfológicos de Neossolos Regolíticos no Agreste Meridional de Pernambuco

RESUMO Neossolos Regolíticos no Agreste Meridional de Pernambuco são utilizados para diversas atividades agrícolas, com destaque para a produção de feijão. Há uma variação expressiva na produção dessa cultura, possivelmente associada à presença de lamelas, que conferem comportamento hídrico distinto entre esses solos. Objetivou-se analisar as características macromorfológicas, micromorfológicas e físicas de Neossolos Regolíticos localizados no Agreste Meridional de Pernambuco, com a finalidade de se entender o comportamento hídrico desses solos. Foram coletados e analisados dois perfis de solos localizados nos municípios de Paranatama (P1 - sem lamela) e de São João (P2 - com lamela). Os resultados mostraram que nos atributos morfológicos (cor, textura, estrutura e consistência) não foram observadas diferenças expressivas entre os dois perfis de solos; os atributos físicos (teor de argila, macroporosidade, microporosidade, capacidade de campo e ponto de murcha permanente) apresentaram diferença significativa entre os horizontes dos perfis estudados; a micromorfologia indicou que a maior retenção de água no P2 é consequência da presença de zonas com empacotamento mais denso de seus componentes (empacotamento aglomerático) e expressividade das pontes de argila; e sugere-se adoção do termo “lamélico” pelo atual Sistema Brasileiro de Classificação de Solos (em 4º nível categórico) para diferenciação dos perfis estudados.

A dialética micro/macro na sociologia da educação

Neste ensaio procuro desenvolver uma argumentação a favor da superação dos monismos metodológicos no campo da pesquisa em sociologia da educação. Com base no que Jeffrey Alexander (1987) denominou o "novo movimento teórico", defendo a necessidade de superar a divisão do trabalho de pesquisa entre os investigadores que se dedicam à microssociologia e os que preferem abordagens macrossociais. Nessa perspectiva, as opções teórico-metodológicas devem-se ancorar nas necessidades da investigação e não numa opção a priori do pesquisador por qualquer uma das alternativas.

Relações macro/micro na pesquisa em currículo

Este artigo analisa as relações macro/micro em teses e dissertações sobre currículo da educação básica, produzidas em programas brasileiros de pós-graduação em educação da Região Sudeste, no período de 1996 a 2002.

Elemental and isotopic zoning in natural alpine quartz

THESIS ABSTRACT : Stable isotope geochemistry is used to help resolve a large number of geological questions. In order to do this, it is essential to understand the different mechanisms that govern isotopic fractionation processes between different phases and to identify the conditions required to reach equilibrium fractionation. However, at low temperatures, these processes are poorly constrained and many factors can induce differential partitioning of the isotopes between sectors of a mineral species and the fluid during mineral growth. This can result in so-called 'sector zoning' of a mineral species. The aim of this thesis is to evaluate the occurrence of sector zoning of the oxygen isotopes and trace elements in natural α-quartz crystals and to identify the reasons for such zoning. The implications for the fluid-mineral interactions are studied in the context of the Alpine metamorphism. The approach chosen has focused on examining the crystal structure, cathodoluminescence appearance (CL), and on relating elemental (e.g. Li, Na, Al, P, K, Ca, Ge, Ti, Fe) to stable oxygen isotope compositions between and along different growth sectors. Low temperature quartz samples were selected from Alpine veins in different localities, where growth conditions have already been well constrained. The mineralogy as well as the isotopic compositions of the host rocks were also investigated, in order to interpret the variations obtained between the different growth stages in the framework of fluid-rock interaction during Alpine metamorphism. Depending on the growth conditions, most of the studied quartz is strongly zoned in CL, and it reveals corresponding zonations in the trace element content (e.g. growth zoning). Aluminium, substituting for Si in the lattice, was found in concentrations up to 1000's ppma, and its distribution is strongly related to Li and H and to a lesser extent, to Ge. Elemental sector zoning is evident from the distribution of these three elements since they exhibit differences in their respective concentrations between faces for distinct growth zones, with prismatic faces having the lowest Al contents. Quartz from veins in magmatic rocks, for example, tend to have lower Al concentrations and similar concentrations of Li and Ti suggesting also a contribution of these elements from the host rock. The relationship between Al and Li is still correlated. Only Alpine crystals grown at higher temperatures (~400°C) without any CL zoning feature are free of these impurities and do not show such zoning characteristics. Differences in the δ18O values were measured between different faces principally in the AIenriched growth zones or stages. These results were confirmed by the means of two different methods (in situ/non in situ). However, it was determined that the Al concentrations do not affect significantly oxygen isotope fractionations at 300°C. The results altogether suggest that the presence of sector zoning in quartz crystals is real, but not universal, and henceforth should be taken into consideration for any use of these systems. The occurrence of disequilibrium partitioning has been enhanced and is possibly related to kinetic processes as well as structural effects that do not affect similarly trace element incorporation and isotopic fractionation. In situ measurements also revealed fine scale δ18O zonations along growth paths that are useful to constrain fluid-rock interactions during Alpine metamorphism. Variations in the δ18O values present along growth vectors indicate changes in the fluid composition and origin. Association with oxygen isotope composition of the host rock allows for the deduction of interactions between rocks, veins and consequently fluids, as well as fluid regimes. RESUME DE LA THESE : A basses températures, (i.e. <400°C) les différents mécanismes qui régissent le fractionnement isotopique ainsi que les conditions nécessaires pour établir un état d'équilibre sont peu connus et nombre de paramètres peuvent entraîner un partitionnement chimique différentiel entre différents secteurs d'un minéral et le fluide en contact. Ainsi, ce travail de thèse a pour but d'évaluer la possible présence de zonages sectoriels en isotopes de l'oxygène mais aussi en éléments traces dans des cristaux naturels de quartz-α de basses températures, ainsi que les raisons d'un tel phénomène et enfin ses implications sur les interactions fluide-roche, principalement dans le cadre du métamorphisme Alpin. La structure et l'apparence en cathodoluminescence (CL) des échantillons ont été caractérisées avant de retracer en détail les compositions en élément traces (Li, Na, Al, P, K, Ca, Ge, Ti, Fe) et en isotopes de l'oxygène, le long et entre différents secteurs. Les échantillons de quartz sélectionnés proviennent majoritairement de veines Alpine de différentes localités, où les conditions de croissance ont été déjà bien caractérisées. Les compositions minéralogiques et isotopiques de la roche encaissante ont aussi été examinées, pour contraindre les variations obtenues dans un contexte Alpin. Selon leurs conditions de croissance, la plupart des cristaux étudiés sont fortement zonés, ce qui est souligné par un zonage des concentrations en éléments traces (e.g. zonage de croissance). L'Aluminium, qui peut se substituer à la Silice dans le réseau cristallin, a été retrouvé jusqu'en très grandes concentrations dans certaines zones (plusieurs milliers de ppma). De plus, la distribution en Al est fortement liée à celles de Li et H, ainsi que dans une moindre mesure à Ge. La présence de zonage sectoriel est évidente au niveau de ces éléments qui montrent de larges différences de concentrations entre différentes faces pour une même zone de croissance, avec les concentrations les plus basses retrouvées dans les faces prismatiques. Les quartz de veines situées dans des roches magmatiques par exemple possèdent des concentrations en Li et Ti de même ordre de grandeur, confirmant le rôle de la composition de la roche encaissante. La relation Li/Al est toujours fortement présente, mais ce rapport est fonction de la face mesurée. Seuls les cristaux Alpins de plus hautes températures (400°C) ne possédant pas de zones en CL ne présentent aucune de ces caractéristiques. Des différences dans les valeurs de δ18O de zones identiques enrichies en Al ont clairement été mesurées entre les différentes faces r, z, et m, mais aussi au sein d'une même seule zone, indiquant que le fractionnement a probablement eu lieu en déséquilibre. Il a été déterminé que la présence d'Al dans ces teneurs n'avait qu'un faible effet sur le fractionnement isotopique de l'oxygène. L'utilisation de deux méthodes différentes a permis d'obtenir des résultats in situ et non in situ concordants. La comparaison des résultats obtenus permet de démontrer que le zonage sectoriel est bien présent dans certains cristaux de quartz, et dépend des conditions de formation. La présence d'un partitionnement différentiel des éléments traces peut être due à des effets cinétiques aussi bien que structuraux, alors que le zonage sectoriel des isotopes de l'oxygène aurait d'autres origines. Il est alors évident que la possibilité de zonage sectoriel doit être désormais pris en considération avant toute interprétations de données isotopiques de cristaux zonés. Les mesures in situ ont de plus permis de distinguer de fines variations des valeurs δ18O au cours de la croissance, qui peuvent aider à retracer la circulations des fluides dans les Alpes durant cette période. En association avec les compositions des roches encaissantes, ii est possible de déduire les interactions entre roches, veines, et par conséquent fluides, au cours de différentes étapes. RESUME GRAND PUBLIC : La géochimie des isotopes stables a pris beaucoup d'importance depuis ces dernières années pour aider à résoudre nombre de questions géologiques, en se basant sur les caractéristiques du fractionnement isotopiques pour différents systèmes. Il est donc nécessaire d'avoir une connaissance approfondie des mécanismes qui s'appliquent au fractionnement isotopique entre les minéraux et les fluides à partir desquels ils se forment. Ces mécanismes ont été bien approchés par différents types de calibrations pour des systèmes à hautes températures, cependant cela n'est pas aussi évident pour les systèmes à des températures inférieures à 400-500°C. Ce travail de thèse a pour but d'aider à la description et la compréhension des phénomènes qui peuvent affecter le fractionnement isotopique à basses températures, ainsi que leurs implications, à partir de l'étude de cristaux de quartz. Le choix des échantillons s'est porté sur des cristaux naturels formés à des températures inférieures ou égales à 400°C, provenant majoritairement de fissures hydrothermales Alpines dont les conditions de formation ont déjà été déterminées. L'étude des cristaux Alpin permet de plus de replacer les résultats obtenus dans le contexte du métamorphisme Alpin au cours du Miocène (21-13 Ma). Après examen de la structure et de la morphologie des cristaux, et leur caractérisation par cathodoluminescence (CL), des analyses chimiques détaillées sur les éléments en traces pouvant entrer dans le réseau cristallin du quartz comme impuretés (i.e. Li, Na, Al, P, K, Ca, Ge, Ti), et des isotopes stables de l'oxygène, ont été menées. En fonction des conditions de croissance, la plupart des cristaux présentent des zonations, qui peuvent être facilement reliées à la distribution des éléments traces analysés par microsonde électronique, sonde ionique (SIMS) et LA-ICPMS. De fortes concentrations d'Aluminium (plusieurs milliers de parties par million atomique) ont pu être observées dans les zones les plus externes des cristaux. De plus, les concentrations en Al et en Li sont toujours corrélées; la présence d'Hydrogène déduite à partir d'analyses par FTIR suit cette même tendance. Les différentes faces des cristaux présentent des concentrations distinctes d'Al, Li et H pour des mêmes zones de croissance, avec par exemple les concentrations les plus faibles dans les zones des faces prismatiques. Cela implique la présence d'un zonage sectoriel, qui a déjà été observé principalement dans des carbonates mais jamais décrit auparavant pour des quartz. Seuls les cristaux alpins homogènes en CL dont la croissance s'est faite à plus haute température (400°C) ne présentent aucune de ces caractéristiques. Par analogie avec le zonage sectoriel en Al, élément qui se substitue au Si dans le réseau cristallin du quartz, il est possible de penser qu'un zonage sectoriel pourrait aussi s'appliquer aux isotopes de l'oxygène. Des précédentes études avaient en effet émis cette hypothèse. Nos résultats ont été obtenus à partir d'analyses à la fois in- situ par SIMS, et par extraction assistée par laser-CO2 sur des parties de quartz soigneusement séparées, et sont en accord entre les deux méthodes. Un zonage sectoriel est en effet bien présent pour les cristaux alpins, mais principalement au niveau des zones très riches en Aluminium. Cependant, il a été déterminé que la présence d'Al dans ces teneurs avait un effet plus que minimal sur le fractionnement isotopique de l'oxygène. Des différences importantes ont été observées entre les faces r & z mais aussi au sein d'une même et seule zone, indiquant que le fractionnement a pu avoir lieu en déséquilibre, ce qui est aussi visible au niveau des valeurs totalement opposées entre faces pour la dernière phase de croissance de certains cristaux. Ainsi l'association de ces résultats laisse suggérer que la présence d'un zonage sectoriel peut être liée à différents paramètres tels que le taux de croissance ou la structure de surface du cristal, mais qui n'affectent pas de la même façon l'incorporation des éléments traces et le fractionnement isotopique. La possibilité d'un zonage sectoriel est importante à prendre en compte lors de toute interprétation de données isotopiques. Les analyses des isotopes de l'oxygène effectuées par SIMS ont aussi permis de distinguer des variations importantes à petite échelle au cours de la croissance. Des mesures faites par laser CO2 sur certaines roches encaissantes, ont permis distinguer plusieurs étapes dans la croissance des minéraux et de déduire le rôle de l'encaissant et le type de fluide. En association avec de précédentes études, il a été ainsi possible de mieux contraindre la formation de ces cristaux dans le contexte alpin et la circulation de fluide au cours du métamorphisme alpin durant le Miocène.

Can we disentangle predator-prey interactions from species distributions at a macro-scale? A case study with a raptor species.

There is a debate on whether an influence of biotic interactions on species distributions can be reflected at macro-scale levels. Whereas the influence of biotic interactions on spatial arrangements is beginning to be studied at local scales, similar studies at macro-scale levels are scarce. There is no example disentangling, from other similarities with related species, the influence of predator-prey interactions on species distributions at macro-scale levels. In this study we aimed to disentangle predator-prey interactions from species distribution data following an experimental approach including a factorial design. As a case of study we selected the short-toed eagle because of its known specialization on certain prey reptiles. We used presence-absence data at a 100 Km2 spatial resolution to extract the explanatory capacity of different environmental predictors (five abiotic and two biotic predictors) on the short-toed eagle species distribution in Peninsular Spain. Abiotic predictors were relevant climatic and topographic variables, and relevant biotic predictors were prey richness and forest density. In addition to the short-toed eagle, we also obtained the predictor's explanatory capacities for i) species of the same family Accipitridae (as a reference), ii) for other birds of different families (as controls) and iii) species with randomly selected presences (as null models). We run 650 models to test for similarities of the short-toed eagle, controls and null models with reference species, assessed by regressions of explanatory capacities. We found higher similarities between the short-toed eagle and other species of the family Accipitridae than for the other two groups. Once corrected by the family effect, our analyses revealed a signal of predator-prey interaction embedded in species distribution data. This result was corroborated with additional analyses testing for differences in the concordance between the distributions of different bird categories and the distributions of either prey or non-prey species of the short-toed eagle. Our analyses were useful to disentangle a signal of predator-prey interactions from species distribution data at a macro-scale. This study highlights the importance of disentangling specific features from the variation shared with a given taxonomic level.

Non-functioning pituitary macro-incidentalomas benefit from early surgery before becoming symptomatic.

OBJECTIVE: Pituitary incidentalomas (PIs) constitute an increasingly clinical problem. While the therapeutic management is well defined for symptomatic non-functioning PIs (NFPIs), a controversy still exists for asymptomatic macro-NFPIs between surgery and a "wait and see" approach. The aim of this study is to compare surgical results between symptomatic and asymptomatic macro-NFPIs. METHODS: We conducted a retrospective study on 76 patients with newly diagnosed symptomatic and asymptomatic macro-NFPIs operated on between 2001 and 2010. We compared age, tumor size and surgical results between these two patient groups. RESULTS: After the initial evaluation, 48 patients were found to be symptomatic. Gross total removal (GTR) rate was significantly higher in asymptomatic (82%) than in symptomatic patients (58%; p=0.03). Gross total removal was strongly associated with Knosp's classification (p=0.01). Postoperative endocrinological impairment was significantly associated with the existence of preoperative symptoms (p=0.03). It was 10 times less frequent in the asymptomatic group. In symptomatic patients, postoperative visual and endocrinological impairment were present in 49% and 78% versus 0% and 14% in asymptomatic patients respectively. CONCLUSIONS: The endocrinological and visual outcome was better in those patients who underwent surgery for asymptomatic tumors. The extent of tumor resection was also significantly greater in smaller tumors. It would therefore be appropriate to offer surgery to patients with asymptomatic macro-NFPIs.