Recent developments in the Portuguese nut sector

This work aims to present the main results of an overview study of the nut sector in Portugal. Within the group of horticultural products, different kinds of nuts have been receiving financial supports for several years. The objective was the achievement of a technical recovery and the improvement of commercial organisations. In spite of this help, the sector does not show a clear signal of dynamism. In this study, information has been taken from data series on production, exports and imports and also about empirical approaches on market mechanismsT. hese instruments have helpedt o better identify problems that seemto be responsible for the lack of performance of the Portuguese nut sector in international markets.

Chaînes opératoires and resource-exploitation strategies in chimpanzee (Pan troglodytes) nut cracking

Journal of Human Evolution, V. 55, pp. 148-163

Vegetables, an innovative nut: A Marketing Plan developed for PepsiCo Iberia

A Work Project, presented as part of the requirements for the Award of a Masters Degree in Management from the NOVA – School of Business and Economics

Novel applications of cashew nut shell liquid in the polymer field

This research project aims at developing new applications for CNSL in the polymer field. Cashew nut shell liquid (CNSL) is a cheap agro-byproduct and renewable resource which consists mainly of substituted phenols. By using CNSL in place of phenol, phenol derived from petrochemicals can be conserved and a cheap agro-byproduct utilized.In this study CNSL based resin is prepared by condensing a mixture of phenol and CNSL with hexamethylenetetramine and the effect of P: F ratio and CNSL: P ratio on the properties of synthesized resin is studied. The adhesive properties of CNSL based resin in combination with neoprene rubber are investigated. The effect of varying the stoichiometric ratios between total phenol and formaldehyde and CNSL and phenol of the resin, resin content, choice and extent of fillers and adhesion promoters in the adhesive formulation are studied. The effect of resin on the ageing properties of various elastomers is also studied by following changes in tensile strength, elongation at break, modulus, tear strength, swelling index and acetone soluble matter. Crude CNSL and resins with different P: F ratios and CNSL: P ratios are incorporated into elastomers. Lastly, utility of CNSL based resin as binder for making particleboard is investigated.The results show that CNSL based resin is an effective ingredient in adhesives for bonding aluminium to aluminium. The resin used for adhesive fonnulation gives the best performance at 45 to 55 phr resin and a total phenol: formaldehyde of l:2.9. The resin when added at a rate of l5 phr improves ageing characteristics of elastomers with respect to mechanical properties. The reaction mixture of CNSL and hexa and the resin resulting from the condensation of CN SL, phenol and hexa can be used as effective binders for moulding particleboard.

Nut i Ka. De com Thot, guardià dels sons, ensenyà a parlar a les persones. 'Nut y Ka. De como Thot, guardián de los sonidos, enseñó a hablar a las personas'.

Propuesta didáctica de fonética de la lengua catalana. Cuento interactivo para escolares del ciclo inicial y de educación infantil. Incluye juegos de construcción de palabras con los sonidos de la lengua catalana y actividades de apoyo para el trabajo de logopedia. Resumen tomado de la publicación.

Enhancing the recovery of tiger nut (Cyperus esculentus) oil by mechanical pressing: moisture content, particle size, high pressure and enzymatic pre-treatment effects

Tiger nut (Cyperus esculentus) tuber contains oil that is high in monounsaturated fatty acids, and this oil makes up about 23% of the tuber. The study aimed at evaluating the impact of several factors and enzymatic pre-treatment on the recovery of pressed tiger nut oil. Smaller particles were more favourable for pressing. High pressure pre-treatment did not increase oil recovery but enzymatic treatment did. The highest yield obtained by enzymatic treatment prior to mechanical extraction was 33 % on a dry defatted basis, which represents a recovery of 90 % of the oil. Tiger nut oil consists mainly of oleic acid; its acid and peroxide values reflect the high stability of the oil.

Edible oil from Tiger nut (Cyperus esculentus L.): mechanical pressing and aqueous enzymatic extraction methods

The tiger nut tuber of the Cyperus esculentus L. plant is an unusual storage system with similar amounts of starch and lipid. The extraction of its oil employing both mechanical pressing and aqueous enzymatic extraction (AEE) methods was investigated and an examination of the resulting products was carried out. The effects of particle size and moisture content of the tuber on the yield of tiger nut oil with pressing were initially studied. Smaller particles were found to enhance oil yields while a range of moisture content was observed to favour higher oil yields. When samples were first subjected to high pressures up to 700 MPa before pressing at 38 MPa there was no increase in the oil yields. Ground samples incubated with a mixture of α- Amylase, Alcalase, and Viscozyme (a mixture of cell wall degrading enzyme) as a pre-treatment, increased oil yield by pressing and 90% of oil was recovered as a result. When aqueous enzymatic extraction was carried out on ground samples, the use of α- Amylase, Alcalase, and Celluclast independently improved extraction oil yields compared to oil extraction without enzymes by 34.5, 23.4 and 14.7% respectively. A mixture of the three enzymes further augmented the oil yield and different operational factors were individually studied for their effects on the process. These include time, total mixed enzyme concentration, linear agitation speed, and solid-liquid ratio. The largest oil yields were obtained with a solid-liquid ratio of 1:6, mixed enzyme concentration of 1% (w/w) and 6 h incubation time although the longer time allowed for the formation of an emulsion. Using stationary samples during incubation surprisingly gave the highest oil yields, and this was observed to be as a result of gravity separation occurring during agitation. Furthermore, the use of high pressure processing up to 300 MPa as a pre-treatment enhanced oil yields but additional pressure increments had a detrimental effect. The quality of oils recovered from both mechanical and aqueous enzymatic extraction based on the percentage free fatty acid (% FFA) and peroxide values (PV) all reflected the good stabilities of the oils with the highest % FFA of 1.8 and PV of 1.7. The fatty acid profiles of all oils also remained unchanged. The level of tocopherols in oils were enhanced with both enzyme aided pressing (EAP) and high pressure processing before AEE. Analysis on the residual meals revealed DP 3 and DP 4 oligosaccharides present in EAP samples but these would require further assessment on their identity and quality.

A study of the chemical and physical properties of cashew nut shell ash for use in cement materials.

A study of the chemical and physical properties of cashew nut shell ash for use in cement materials. Ash occupies a prominent place among agro-industrial wastes, as it is derived from energy generation processes. Several types of ash have pozzolanic reactivity, and might be used as replacement material for cement, resulting in less energy waste and lower cost. This work aimed to investigate the physical and chemical properties of the cashew nut shell ash (CNSA), by performing the following measurement tests: chemical analysis, bulk density, specific mass, leaching and solubilization process, X-ray diffraction (XrD), specific surface area (BET) and pozzolanicity analysis with cement and lime. The results indicate a low reactivity of CNSA and the presence of heavy metals, alkalis and phenol.

Densities and Viscosities of vegetable oils of nutritional value

Densities and viscosities of five vegetable oils (Babassu oil, Buriti oil, Brazil nut oil, macadamia oil, and grape seed oil) and of three blends of Buriti oil and soybean oil were measured as a function of temperature and correlated by empirical equations. The estimation capability of two types of predictive methodologies was tested using the measured data. The first group of methods was based on the fatty acid composition of the oils, while the other was based on their triacylglycerol composition, as a multicomponent system. In general, the six models tested presented a good representation of the physical properties considered in this work. A simple method of calculation is also proposed to predict the dynamic viscosity of methyl and ethyl ester biodiesels, based on the fatty acid composition of the original oil. Data presented in this work and the developed model can be valuable for designing processes and equipment for the edible oil industry and for biodiesel production.

Habitat manipulation and rodent damage control: reducing rodent damage in Australian macadamia orchards

This paper examines the relationship between adjacent non-crop vegetation and rodent (Rattus rattus) damage in Australian macadamia (Macadamia integrifolia) orchard systems. Orchards adjacent to structurally diverse, non-crop vegetation dominated by woody weeds exhibited significantly higher damage when compared to orchards adjacent to managed grasslands. This relationship formed the basis for a rodent damage reduction strategy utilising habitat manipulation. Structurally diverse, non-crop habitats were modified to grasslands leading to a reduction in rodent damage of 65%. This strategy was cost-effective and has the potential to be long-term with minimal effort needed to maintain sites in a modified state. Habitat manipulation is a process whereby the resource load in a system is reduced and hence rodent densities cannot reach levels where they cause significant crop damage. This paper provides empirical evidence to support habitat manipulation as a practical, cost-effective control strategy for rodent pests.

IgE cross-reactivity between the major peanut allergen Ara h 2 and tree nut allergens

Allergy to peanut and tree nuts is characterised by a high frequency of life-threatening anaphylactic reactions and typically lifelong persistence. Although peanut is the most common cause of nut allergy, peanut allergic patients are frequently also sensitive to tree nuts. It is not known if this is due to cross-reactivity between peanut and tree nut allergens. In this study, the major peanut allergen Ara h 2 was cloned from peanut cDNA, expressed in E. coli cells as a His-tag fusion protein and purified using a Ni-NTA column. Immunoblotting, ELISA and basophil activation indicated by CD63 expression all confirmed the IgE reactivity and biological activity of rAra h 2. To determine whether or not this allergen plays a role in IgE cross-reactivity between peanut and tree nuts, inhibition ELISA was performed. Pre-incubation of serum from peanut allergic patients with increasing concentrations of almond or Brazil nut extract inhibited IgE binding to rAra h 2. Purified rAra h 2-specific serum IgE antibodies also bound to proteins present in almond and Brazil nut extracts by immunoblotting. This indicates that the major peanut allergen, Ara h 2, shares common IgE-binding epitopes with almond and Brazil nut allergens, which may contribute to the high incidence of tree nut sensitisation in peanut allergic individuals.