Equações de primeiro grau

Trata-se da revisão de tópicos de matemática elementar do ensino fundamental com visão do ensino superior. Na subunidade 3 são abordados conceitos de cálculo algébrico, conjunto universo e conjunto solução de uma equação, equações do primeiro grau e inequações do primeiro grau com resolução de problemas. A subunidade 4 engloba a definição dos conceitos de monômios ou termos algébricos e polinômios e suas propriedades. Como complemento a teoria abordada apresenta exemplos de cálculo do mmc de polinômios e de equações fracionárias de primeiro grau com uma incógnita.

Estudo de resistência da bactéria Escherichia Coli a antibióticos em infecções urinárias na população da Região Autónoma da Madeira

As infecções do tracto urinário (ITU) são doenças infecciosas comuns e distinguem-se em dois grandes grupos: o das infecções do tracto urinário superior e o das infecções do tracto urinário inferior. O principal agente etiológico envolvido nas ITU é a bactéria Escherichia coli (E. coli), representando 80-95% dos invasores do tracto urinário na população em geral. É mais comum entre os adultos do sexo feminino, principalmente com actividade sexual, embora as crianças, mulheres grávidas e idosos também apresentam grande susceptibilidade. Paralelamente, a problemática da resistência aos antimicrobianos é um tema actual e muito debatido internacionalmente. Como tal, o presente estudo teve como principal objectivo contribuir para a identificação fiável da bactéria E. coli em infecções urinárias bem como a determinação do seu perfil de resistência a antibióticos. Os dados apresentados referem-se a um estudo efectuado entre Outubro de 2008 e Junho de 2009 no Laboratório de Análises Clínicas Castro Fernandes – MMC. Foram analisadas 6522 amostras de urina, das quais 390 corresponderam a uroculturas positivas. Verificou-se que o sexo feminino tem uma maior propensão para infecções urinárias, havendo uma tendência para o aumento das ITU com a idade. Na interpretação da cultura revelou-se importante a informação dada pelo exame cultural acerca do número de leucócitos. Concluiu-se que nas uroculturas cujo número de colónias foi superior a 105 com menos de três espécies de colónias diferentes na cultura, o número de leucócitos foi superior a 30 milhares de células por μL, o que sugere a existência de infecção urinária. No estudo do perfil de sensibilidade da bactéria E. coli isolada, para a família dos betalactâmicos (Ampicilina (AMP), Amoxicilina/Ácido Clavulânico (AMC), Piperacilina/Tazobactam (PIP/TZP)), família das cefalosporinas (Cefalotina (KF), Cefuroxima (CXM), Cefuroxima Acetil (CA), Cefotaxima (CTX), Ceftazidima (CAZ), Cefepima (FEP)), família dos aminoglicosídeos (Amicacina (AM), Gentamicina (GM), Tobramicina (TOB)) e para as nitrofurantoínas (F), verificou-se uma grande sensibilidade e pouca resistência em termos quantitativos, mas para a família das quinolonas (Ciprofloxacina (CIP), Levofloxacina (LEV), Norfloxacina (NOR)) e para os Trimetoprim/Sulfametoxazol (TMP/SMX) verificou-se resistências quantitativamente superiores aos das famílias anteriormente referidas, sugerindo valores convergentes aos da tendência europeia. Foram identificados famílias de fenótipos tais como: os beta-lactâmicos, os aminoglicosídeos, quinolonas, tetraciclinas, furanos e trimetoprim/sulfamidas.E. coli é um microganismo cujo fenótipo selvagem não tem resistências intrínsecas. Todas as resistências são adquiridas. Actualmente, a realização dos antibiogramas para E. coli tornou-se fundamental tendo em vista os factores ecológicos, genéticos, ambientais e pelo facto de que mais isolados são resistentes à maioria dos antibióticos. Como conclusão, este estudo permitirá alertar para um problema sério que é uma grande ameaça à Saúde Pública.

Estudo da sinterização do aço inox 316L reforçado com 3% Carbeto de Tântalo - TaC

The present work shows a contribution to the studies of development and solid sinterization of a metallic matrix composite MMC that has as starter materials 316L stainless steel atomized with water, and two different Tantalum Carbide TaC powders, with averages crystallite sizes of 13.78 nm and 40.66 nm. Aiming the metallic matrix s density and hardness increase was added different nanometric sizes of TaC by dispersion. The 316L stainless steel is an alloy largely used because it s high resistance to corrosion property. Although, its application is limited by the low wear resistance, consequence of its low hardness. Besides this, it shows low sinterability and it cannot be hardened by thermal treatments traditional methods because of the austenitic structure, face centered cubic, stabilized mainly in nickel presence. Steel samples added with TaC 3% wt (each sample with different type of carbide), following a mechanical milling route using conventional mill for 24 hours. Each one of the resulted samples, as well as the pure steel sample, were compacted at 700 MPa, room temperature, without any addictive, uniaxial tension, using a 5 mm diameter cylindrical mold, and quantity calculated to obtain compacted final average height of 5 mm. Subsequently, were sintered in vacuum atmosphere, temperature of 1290ºC, heating rate of 20ºC/min, using different soaking times of 30 and 60 min and cooled at room temperature. The sintered samples were submitted to density and micro-hardness analysis. The TaC reforced samples showed higher density values and an expressive hardness increase. The complementary analysis in optical microscope, scanning electronic microscope and X ray diffractometer, showed that the TaC, processed form, contributed with the hardness increase, by densification, itself hardness and grains growth control at the metallic matrix, segregating itself to the grain boarders

Sinterização de aço inoxidável reforçado com partículas nanométricas dispersas de carbeto de nióbio - NbC

Metal powder sintering appears to be promising option to achieve new physical and mechanical properties combining raw material with new processing improvements. It interest over many years and continue to gain wide industrial application. Stainless steel is a widely accepted material because high corrosion resistance. However stainless steels have poor sinterability and poor wear resistance due to their low hardness. Metal matrix composite (MMC) combining soft metallic matrix reinforced with carbides or oxides has attracted considerable attention for researchers to improve density and hardness in the bulk material. This thesis focuses on processing 316L stainless steel by addition of 3% wt niobium carbide to control grain growth and improve densification and hardness. The starting powder were water atomized stainless steel manufactured for Höganäs (D 50 = 95.0 μm) and NbC produced in the UFRN and supplied by Aesar Alpha Johnson Matthey Company with medium crystallite size 16.39 nm and 80.35 nm respectively. Samples with addition up to 3% of each NbC were mixed and mechanically milled by 3 routes. The route1 (R1) milled in planetary by 2 hours. The routes 2 (R2) and 3 (R3) milled in a conventional mill by 24 and 48 hours. Each milled samples and pure sample were cold compacted uniaxially in a cylindrical steel die (Ø 5 .0 mm) at 700 MPa, carried out in a vacuum furnace, heated at 1290°C, heating rate 20°C stand by 30 and 60 minutes. The samples containing NbC present higher densities and hardness than those without reinforcement. The results show that nanosized NbC particles precipitate on grain boundary. Thus, promote densification eliminating pores, control grain growth and increase the hardness values

Desenvolvimento e caracterização de um compósito matriz metálica (CMM): aço EUROFER97 reforçado com Carbeto de Tântalo - TaC

Steel is an alloy EUROFER promising for use in nuclear reactors, or in applications where the material is subjected to temperatures up to 550 ° C due to their lower creep resistance under. One way to increase this property, so that the steel work at higher temperatures it is necessary to prevent sliding of its grain boundaries. Factors that influence this slip contours are the morphology of the grains, the angle and speed of the grain boundaries. This speed can be decreased in the presence of a dispersed phase in the material, provided it is fine and homogeneously distributed. In this context, this paper presents the development of a new material metal matrix composite (MMC) which has as starting materials as stainless steel EUROFER 97, and two different kinds of tantalum carbide - TaC, one with average crystallite sizes 13.78 nm synthesized in UFRN and another with 40.66 nm supplied by Aldrich. In order to improve the mechanical properties of metal matrix was added by powder metallurgy, nano-sized particles of the two types of TaC. This paper discusses the effect of dispersion of carbides in the microstructure of sintered parts. Pure steel powders with the addition of 3% TaC UFRN and 3% TaC commercial respectively, were ground in grinding times following: a) 5 hours in the planetary mill for all post b) 8 hours of grinding in the mill Planetary only for steel TaC powders of commercial and c) 24 hours in the conventional ball mill mixing the pure steel milled for 5 hours in the planetary mill with 3% TaC commercial. Each of the resulting particulate samples were cold compacted under a uniaxial pressure of 600MPa, on a cylindrical matrix of 5 mm diameter. Subsequently, the compressed were sintered in a vacuum furnace at temperatures of 1150 to 1250 ° C with an increment of 20 ° C and 10 ° C per minute and maintained at these isotherms for 30, 60 and 120 minutes and cooled to room temperature. The distribution, size and dispersion of steel and composite particles were determined by x-ray diffraction, scanning electron microscopy followed by chemical analysis (EDS). The structures of the sintered bodies were observed by optical microscopy and scanning electron accompanied by EDS beyond the x-ray diffraction. Initial studies sintering the obtained steel EUROFER 97 a positive reply in relation to improvement of the mechanical properties independent of the processing, because it is obtained with sintered microhardness values close to and even greater than 100% of the value obtained for the HV 333.2 pure steel as received in the form of a bar

Novo sistema de aplicação de drogas em cirurgias oftalmológicas

The topical corneal application of antimitotic mitomycin-C (MMC) during refractive surgery is still characterized by a lack of standardization and considerable empirism. For this reason the creation of a system capable of reliable drug delivery represents a beneficial innovation for patients submitted to these procedures. Objective: Elaborate a new MMC delivery system during the transoperatory period of photorefractive keratectomy (PRK) followed by patent application. Methods: The project consists of an in vitro experimental study to create an MMC (0.02%) release system. The drug was impregnated in sterile Whatman® 41 paper filter discs with a diameter of 8 mm. After drying, the discs were applied to antibiogram plates seeded with Staphylococcus epidermidis (American Type Culture Collection ATCC 12228), followed by the addition of a drop of sterile water. At the end of 1 minute, the discs were removed and the plates incubated for 48 hours at 35oC. Mean drop volume in the collyrium flasks was measured using analytical balance weighing. The inhibition halo (mm) was correlated with the MMC impregnated into the disc. After completion of the invention design a patent application was lodged at the National Institute of Industrial Property. Results: The correspondence between MMC-produced inhibition halos indicated that a dose of 16μg was ideal for impregnating into the discs. The mean drop volume obtained from the collyrium flasks was 37.7 μL. A minute after the application of one drop of balanced saline solution, the system released an adequate concentration for PRK surgery. Conclusion: A new MMC delivery system was created for transoperatory application in photorefractive keratectomy (PRK). Publication of the patent application (number PI 0704739-8) gives the authors exclusive intellectual property rights. The study was sponsored by Ophthalmos Indústria e Comércio de Produtos Farmacêuticos S.A. (São Paulo-SP, Brazil) and received the indispensable scientific contribution of researchers from the fields of Pharmacy, Medicine, Biology, Statistics and Law, characterizing the work as multidisciplinary, in accordance with norms established by the Postgraduate Health Sciences Program of the Federal University of Rio Grande do Norte (UFRN)

Assessment of estrogenic, mutagenic and antimutagenic activity of nemorosone

Currently, a wide range of research involving natural products is focused on the discovery of new drugs in many different therapeutic areas. A great number of the synthetic compounds on the market were derived from natural products, especially plants. Nemorosone is the major constituent of the floral resin of Clusia rosea Jacq., Clusiaceae, and in Cuban propolis. In vitro studies have shown cytotoxic activity in this substance against various tumor cell lines, including those resistant to various cytotoxic drugs, whereas it has low cytotoxicity to non-tumoral cells. Therefore, in order to characterize the biological activity of nemorosone, a substance with potential antitumor activity, and in view of preclinical testing of the toxicity of drug candidate compounds, the main aim of this study was to determine the mutagenic and antimutagenic activity of nemorosone by the Ames test, using the strains TA97a, TA98, TA100 and TA102 of Salmonella typhimurium. Secondly, to characterize the estrogenic activity in an experimental recombinant yeast model (Recombinant Yeast Assay) mutagenic activity was observed at in any of the concentrations in any of the test strains. To evaluate the antimutagenic potential, direct and indirect mutagenic agents were used: 4 nitro-o-phenylenediamine (NPD), mitomycin C (MMC) and aflatoxin B1 (AFL). Nemorosone showed moderate antimutagenic activity (inhibition level 31%), in strain TA100 in the presence of AFL, and strong antimutagenic activity in TA102 against MMC (inhibition level 53%). Estrogenic activity was observed, with an EEq of 0.41±0.16 nM at various tested concentrations.

Mutagenicity and antimutagenicity of (-)-hinokinin a trypanosomicidal compound measured by Salmonella microsome and comet assays

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Ileal mucosal mast cell, eosinophil, and goblet cell populations during Hymenolepis diminuta infection of the rat

The population dynamics in the enteric connective tissues of eosinophils, mucosal mast cells (MMC), and in the mucosal epithelium of goblet cells were examined morphometrically in fixed ileal tissue of outbred Sprague Dawley rats during the first 32 days of infection with the tapeworm Hymenolepis diminuta. MMC and eosinophils were present in the lamina propria and submucosa; however, only eosinophils were also present in the muscularis externa. Eosinophilic infiltrate was first observed in the lamina propria at 15 days postinfection (dpi) and the numbers of eosinophils remained elevated through 32 dpi. Initial mucosal mastocytosis was detected on 6 dpi and MC numbers continued to rise over the study period without reaching a plateau. Goblet cell hyperplasia occurred only at 32 dpi. In contrast to some intestinal nematode infections where these same 3 cell types are associated with the host's expulsion responses, H. diminuta is not lost by a rapid host response in the outbred Sprague Dawley rat strain used in these experiments. We suggest that either the induction of hyperplasia of these host effector cells in ileum tissue during H. diminuta infection is not capable of triggering parasite rejection mechanisms, or the function of the induced hyperplasia is necessary for some as yet unassociated physiological or tissue architecture change in the host's intestine.

Hymenolepis diminuta: Praziquantel removal of adult tapeworms is followed by apoptotic down-regulation of mucosal mastocytosis

The rat tapeworm, Hymenolepis diminuta, induces mastocytosis, hypertrophy of enteric smooth muscle, alteration of enteric myoelectric activity, and slowed enteric transit of the rat host's intestine. This report examines the resolution of both tapeworm-induced mastocytosis and tissue changes during the period following removal of the tapeworm with Praziquantel (PZQ). The dynamics of the mucosal mast cell (MMC) population following removal of the tapeworms was assessed by histochemical identification of MMC and morphometric techniques. As a possible mechanism of MMC population regulation, MMC apoptosis was examined over the same experimental period using the in situ nick end labeling of fragmented DNA (TUNEL). Shifts in MMC numbers were correlated with functional and morphological changes of the intestine following removal of the adult-stage tapeworm. Ileal tissues from rats infected 32 days with H. diminuta (the beginning of plateau phase of tapeworm-induced chronic mastocytosis) were harvested 1, 2, 3, and 4 weeks after the PZQ treatment. Control ilea were obtained either from rats which were never infected and never treated with PZQ or from rats infected with H, diminuta for 32 days but not treated with PZQ. In order to detect MMC and apoptosis, tissue sections of ileum were doubled stained sequentially with Astra blue for MMC granules followed by a modification of the TUNEL technique. No alteration in MMC numbers were observed in PZQ-treated animals until 3 weeks after the removal of the tapeworms. The decline of MMC occurred in the mucosa and submucosa. MMC numbers first approached uninfected control levels at 4 weeks posttreatment. Coincident with the decline in mucosal MMC numbers, the rate of MMC entering apoptosis also declined. Simultaneously, ileal smooth muscle layers, hypertrophied by infection, and mucosal structures began the process of involution and atrophy. Apoptosis of MMC in the submucosa and muscularis mucosa was not detected. In conclusion, H. diminuta elicited mastocytosis and increased thickness of both mucosa and muscularis externa do not begin a decline toward control Values until 3 weeks after the parasites are gone and normal intestinal motility is restored. These data are consistent with the lack of MMC mediation of altered motility, and the decline in the rate of MMC apoptosis at 3 weeks post-PZQ suggests that apoptosis may play an important role in the involution of tapeworm-induced mastocytosis. (C) 1999 Academic Press.

Desempenho agronômico da cultura do milho e espécies forrageiras em sistema de Integração Lavoura-Pecuária no Cerrado

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Valores de referência para o teste de caminhada com carga progressiva em indivíduos saudáveis: da distância percorrida às respostas fisiológicas

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Influência da massa magra corporal nas repercussões cardiopulmonares durante o teste de caminhada de seis minutos em pacientes com DPOC

OBJETIVO: A massa magra corporal (MMC) tem sido associada à mortalidade em pacientes com DPOC, mas seu impacto na limitação funcional é pouco conhecido. O objetivo deste trabalho foi analisar as variáveis cardiopulmonares em pacientes com DPOC, com ou sem depleção da MMC, antes e após a realização do teste de caminhada de seis minutos (TC6). MÉTODOS: Foram avaliados pacientes com DPOC, 36 sem depleção de MMC e 32 com depleção de MMC. Todos os pacientes foram submetidos à avaliação clínica, espirometria, avaliação da composição da massa corpórea e TC6 e responderam a questionários de qualidade de vida e de percepção de dispnéia. RESULTADOS: Não foram observadas diferenças significativas na gravidade de obstrução das vias aéreas, na percepção da dispnéia e na qualidade de vida entre os grupos. A distância percorrida no TC6 foi similar nos pacientes com DPOC com e sem depleção de MMC (470,3 ± 68,5 m vs. 448,2 ± 89,2 m). Entretanto, durante a realização do teste, os pacientes com depleção de MMC apresentaram aumento significativamente maior na diferença entre os valores final e basal da frequência cardíaca e do índice da escala de Borg para cansaço dos membros inferiores. A distância percorrida no TC6 apresentou correlação significativa positiva com o VEF1 (r = 0,381; p = 0,01). CONCLUSÕES: Não houve influência da depleção da MMC na capacidade funcional de exercício e na qualidade de vida dos pacientes estudados. Entretanto, os pacientes com depleção de MMC apresentam sintomas de fadiga dos membros inferiores mais acentuados durante o TC6, o que reforça a importância da avaliação e tratamento das manifestações sistêmicas da DPOC.

Avaliação ultra-estrutural dos efeitos tóxicos da mitomicina C no epitélio ciliar de olhos de coelhos normais com e sem tratamento hipotensor ocular prévio

OBJETIVO: Avaliar o epitélio ciliar interno (ECI) do corpo ciliar após aplicação de mitomicina C (MMC) sob retalho escleral, em animais tratados com dois tipos de inibidores da produção do humor aquoso. MÉTODOS: Foram estudados ambos os olhos de 16 coelhos divididos em 4 grupos experimentais. Foi realizado retalho escleral em todos os olhos dos animais, mas apenas os olhos direitos (OD) receberam MMC. No grupo 1 (G1) não houve tratamento prévio. Nos grupos G2 e G4 foi administrada acetazolamida e nos grupos G3 e G4 maleato de timolol. O ECI foi examinado à microscopia eletrônica de transmissão (MET). Os olhos esquerdos formaram os grupos controle. RESULTADOS: em todos os grupos exceto no G1 OE, foram observadas: retração das células e/ou alargamento entre invaginações, mitocôndrias com rarefação, vesículas claras e corpos densos. A membrana limitante interna estava espessada, descontínua ou descolada em todos grupos exceto G1 OE e G2 OE. Foi observada liberação de material citoplasmático apenas nos grupos tratados com inibidores da produção de humor aquoso. CONCLUSÕES: 1- MMC, acetazolamida e maleato de timolol causaram alterações morfológicas no epitélio ciliar mesmo usados isoladamente. 2- A associação MMC e acetazolamida causou mais alterações do que a acetazolamida isoladamente, mas não mais do que a MMC isoladamente. 3- Nas demais associações as alterações foram semelhantes.

In Vitro Study of Fracture Load and Fracture Pattern of Ceramic Crowns: A Finite Element and Fractography Analysis

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)