Mercury concentrations in Yangtze finless porpoises (Neophocaena phocaenoides asiaeorientalis) from Eastern Dongting Lake, China

Mercury concentrations in some key tissues (liver, kidney, small intestine, stomach, blubber and brain) of five Yangtze finless porpoises (Neophocaena phocaenoides asiaeorientalis), accidentally died in the Eastern Dongting Lake of China between 1998 and 2004, were investigated using Atomic Fluorescent Spectrometry (AFS). Total mercury (T-Hg) concentrations ranged between 0.17 to 181 mu g g wet weight. and varied significantly in different tissues. Liver is the most preferable target organ for mercury accumulation. although the highest T-Hg concentrations were not found exclusively in liver, but also in kidney and small intestine in some individuals. Moreover, it was demonstrated that mercury concentrations increased positively with age of the animals. However, the highest T-Hg concentrations in liver and kidney were both found in a 2-month-old calf, which implied that the transfer efficiency of mercury from mothers to babies in Yangtze finless porpoise is remarkable. And what is more important, it seems that the Yangtze finless porpoise in Eastern Donating Lake had much higher T-Hg levels than those reported for other Phocoenidae species. To be noticed, the T-Hg was accumulated tremendously from aquatic environment to the Yangtze finless porpoise's liver, reaching a bioaccumulation factor (BAF) of 4.3x10(5) in the Eastern Donating Lake ecosystem.

Preliminary study on the photoproduction of hydroxyl radicals in aqueous solution with Aldrich humic acid, algae and Fe(III) under high-pressure mercury lamp irradiation

Under a high-pressure mercury lamp (HPML) and using an exposure time of 4 h, the photoproduction of hydroxyl radicals ((OH)-O-.) could be induced in an aqueous solution containing humic acid (HA). Hydroxyl radicals were determined by high-performance liquid chromatography using benzene as a probe. The results showed that (OH)-O-. photoproduction increased from 1.80 to 2.74 muM by increasing the HA concentration from 10 to 40 mg L-1 at an exposure time of 4 h (pH 6.5). Hydroxyl radical photoproduction in aqueous solutions of HA containing algae was greater than that in the aqueous solutions of HA without algae. The photoproduction of (OH)-O-. in the HA solution with Fe(111) was greater than that of the solution without Fe(III) at pH ranging from 4.0 to 8.0. The photoproduction of (OH)-O-. in HA solution with algae with or without Fe(111) under a 250 W HPML was greater than that under a 125 W HPML. The photoproduction of (OH)-O-. in irradiated samples was influenced by the pH. The results showed that HPML exposure for 4 h in the 4-8 pH range led to the highest (OH)-O-. photoproduction at pH 4.0.

运用含有偶氮苯的自组装单层膜在光化学条件下可逆地控制细胞黏附

细胞生物学研究的一个重要方向是动态地控制细胞在基底上的黏附。最近，随着表面化学的研究深入，尤其是对烷基硫醇在金基底上形成自组装单层膜（self-assembled monolayers, SAMs）这一体系的研究，使得人们能在分子水平的表面上控制细胞黏附。精氨酸-甘氨酸-天冬氨酸（arginine-glycine-aspartate, RGD）序列首先是从细胞外基质蛋白中分离出来的，能够识别并非共价结合细胞膜表面的整合素受体，从而促进细胞黏附。以前的一些工作已经证实，将含有RGD的肽链连接到SAMs表面之后，能够生物特异性地黏附动物细胞。已有的手段比如光照、电压、加热、微电极、微流控以及表面纳米形貌的梯度变化，都不能真正实现可逆地控制细胞黏附，原因是这些方法所用的化学有限；这些方法也不能得到完全抗拒细胞黏附的表面，原因是这些方法产生的表面缺陷等不完整。用两种不同波长的光（紫外光和可见光）照射偶氮苯，偶氮苯会发生可逆的光致异构变化，因此，偶氮苯的光致异构性质可以用来可逆地控制细胞在表面黏附。运用含有偶氮苯的混合SAMs，偶氮苯的末端连接GRGDS肽，混合SAMs中是以末端为六聚乙二醇的硫醇为背景，该SAMs修饰而成的表面能够黏附或者抗拒细胞黏附，其表面黏附性质取决于SAMs中偶氮苯的构象。该方法提供了一种在分子水平的表面上我们所了解到的唯一能可逆控制细胞黏附的方法，该方法需要用到的光源来自于标准荧光显微镜所配置的汞灯。 为了实现在金基底表面可逆的控制细胞黏附，我们合成了如下三个化合物： 由于化合物1的溶解性很差，几乎在所有溶剂里都不溶，所以不能直接用化合物1制备SAMs；化合物2能高效地抗拒细胞的黏附；化合物3的偶氮苯末端是活化酯，能够连接GRGDS肽，从而控制细胞黏附。 将化合物2和化合物3以一定的比例均匀混合在金基底表面形成SAMs，然后将GRGDS肽连接到偶氮苯(反式)的末端（通过GRGDS肽的甘氨酸上的伯胺基与偶氮苯末端的活化酯反应），从而得到细胞黏附的表面。用紫外光照射该细胞黏附表面5-10小时，随着偶氮苯的构象由反式变为顺式，偶氮苯末端的GRGDS肽淹没在化合物2的六聚乙二醇中，得到抗拒细胞黏附的惰性表面。再用可见光照射该惰性表面1个小时，随着偶氮苯的构象由顺式变为反式，原先埋没在六聚乙二醇中的GRGDS肽伸展至单层膜的末端，又得到了细胞黏附的表面。因此，该表面能完全可逆地控制细胞在金表面黏附。 An important area in cell biology is the dynamic control of cell adhesion on substrates. Recent advancements in surface chemistry, in particular, self-assembled monolayers (SAMs) of alkanethiols on gold substrates, have permitted unprecedented control of cell adhesion via molecularly defined surfaces. The tri-peptide sequence arginine-glycine-aspartate (RGD), initially isolated from the extracellular matrix (ECM) proteins, can recognize and non-covalently bind with integrin receptors on cell membranes to promote cell adhesion. Some previous work has demonstrated that RGD peptide grafted on SAMs can allow bio-specific adhesion of mammalian cells that mimic natural adhesion. Existing technologies such as light, voltage, heat, microelectrodes, microfluidic systems and surface gradient of nanotopography, either cannot realize fully reversible control of cell adhesion, due to the limitation in the chemistry used, or cannot yield a surface completely resistant against cell adhesion, due to the imperfection of surfaces. Azobenzenes undergo reversible photo-induced isomerization rapidly at two different wavelengths of light (UV and visible light), it therefore potentially allows the reversible control of cell adhesion on a surface. By using a mixed SAMs presenting azobenzene groups terminated in GRGDS peptides in a background of hexa(ethylene glycol) groups, the surface can either accommodate or resist cell adhesion depending on the conformation of the azobenzene embedded in SAMs. This method provides the only means we know to control cell adhesion reversibly on a molecularly well-defined surface by using light generated by a mercury lamp equipped on standard fluorescence microscopes. To realize the reversible control of cell adhesion on gold surface, we synthesized three kinds of compounds as following, We found that it was difficult to obtain SAMs directly from compound 1 because of its poor solubility in almost all kinds of solvents; compound 2 can resist cell adhesion efficiently; compound 3 presents an azobenzene terminated with NHS-activated ester, which can couple with a GRGDS peptide to control cell adhesion. After coating a gold surface with compound 2 and 3 in appropriate ratios to form a SAM followed by coupling the GRGDS peptides with NHS-activated esters at the end of azobenzene (E configuration) resulted in a cell-adhesive SAM. Irradiating this cell-adhesive SAM with UV light for 5-10 h converted the E configuration of azobenzene into the Z form, the GRGDS peptides becoming masked in the PEG, resulting in a cell-resistant surface. These SAM could again support cell adhesion as a result of the conformational switch of azobenzene from Z to E with the irradiation of visible light for 1 h. This surface, therefore, allows completely reversible control of cell adhesion on a gold surface.

The distribution；occurrence and environmental effect of mercury in Chinese coals

IEECAS SKLLQG

Selective Extraction of Mercury(II) by 1-Naphthylthiourea-Methyl Isobutyl Ketone System

Selective extraction of Mercury(II) using 1-naphthylthiourea-methyl isobutyl ketone (ANTU-MIBK) system from hydrochloric acid solutions (0.1-10 M) has been studied. Influence of foreign ions, acid and ligand concentrations has been investigated. Addition of ANTU in MIBK enhanced, extraction capacity of MIBK to several times. Low effect of foreign ions and high separation factors for a number of metal ions determined at 0.5 M hydrochloric acid concentration evaluated the proposed method efficient and selective. The experimental data obtained from application of the method for extraction of mercury from a synthetic aqueous solution reveal that more than 99% mercury can be separated from cadmium, zinc and selenium in a single step with five minutes equilibration

Mercury selective electrochemical sensor based on a double armed crown ether as ionophore

PVC based membranes of a double armed crown ether, N, N'-dibenzyl, 1,4,10,13-tetraoxa-7, 16-diaza cyclooctadecane (I) as ionophore with sodium tetra phenyl borate (NaTPB) as anion excluder and with many plasticizing solvent mediators have been prepared and used for Hg(II) ion determination. The membrane with DBBP (dibutyl butyl phosphonate ) as plasticizer with various ingredients in the ratio PVC: I: NaTPB: DBBP (150: 12: 2: 100) shows the best results in terms of working concentration range (3.1x10-5-1.0x10-tM) with a Nernstian slope (29.0′0.5 mV/decade of activity). The electrode works in the pH range 2.1-4.5. The response time of the sensor is 15s and it can be used for about 4 months in aqueous as well as in non-aqueous medium. It has good stability and reproducibility. The potentiometric selectivity coefficient values for mono-, di-, and trivalent cations are tabulated. The sensor is highly selective for Hg2+ in the presence of normal interferents like cadmium, silver, sodium and iron.