A sensitive vorticity gauge using rotated porphyroblasts, and its application to rocks adjacent to the Alpine Fault, New Zealand

Variable aspect ratio porphyroblasts deformed in non-coaxial flow. and internally containing rotated relicts of an external foliation, can be used to characterise plane strain flow regimes. The distribution obtained by plotting the orientation of the long axis of such grains, classified by aspect ratio, against the orientation of the internal foliation is potentially a sensitive gauge of both the bulk shear strain (as previously suggested) and kinematic vorticity number. We illustrate the method using rotated biotite porphyroblasts in the Alpine Schist: a sequence of mid-crustal rocks that have been ramped to the surface along the Alpine Fault. a major transpressional plate boundary. Results indicate that, at distances greater than or equal to similar to1 km from the fault, the rocks have undergone a combination of irrotational fattening and dextral-oblique, normal-sense shear, with a bulk shear strain of similar to0.6 and kinematic vorticity number of similar to0.2. The vorticity analysis is compatible with estimates of strongly oblate bulk strain of similar to 75% maximum shortening. Dextral-reverse transpressional flow characterises higher strain S-tectonite mylonite within similar to1 km of the Alpine Fault. These relationships provide insight into the kinematics of flow and distribution of strain in the hangingwall of the Alpine Fault and place constraints on numerical mechanical models for the exhumation of these mid-crustal rocks. (C) 2001 Elsevier Science Ltd. All rights reserved.

Hyaline tissue of thermally unaltered conodont elements and the enamel of vertebrates

Comparison of the ultrastructure of the hyaline tissue of conodont elements and the enamel of vertebrates provides little support for a close phylogenetic relationship between conodonts and vertebrates. Transmission and scanning electron microscopy shows that the mineralised component of the hyaline tissue of Panderodus and of Cordylodus elements consists of large, flat, oblong crystals, arranged in layers that run parallel to the long axis of the conodont. Enamel in the dentition of a living vertebrate, the lungfish Neoceratodus forsteri, has crystals of calcium hydroxyapatite, arranged in layers, and extending in groups from the dentine-enamel junction; the crystals are slender, elongate spicules perpendicular to the surface of the tooth plate, Similar crystal arrangements to those of lungfish are found in other vertebrates, but none resembles the organisation of the hyaline tissue of conodont elements, The crystals of hydroxyapatite in conodont hyaline tissue are exceptionally large, perpendicular or parallel to the surface of the element, with no trace of prisms, unlike the protoprismatic radial crystallite enamel of fish teeth and scales, or the highly organised prismatic enamel of mammals.

Automated regional myocardial displacement for facilitating the interpretation of dobutamine echocardiography

Quantification of stress echocardiography may overcome the training requirements and subjective nature of visual wall motion score (WMS) assessment, but quantitative approaches may be difficult to apply and require significant time for image processing. The integral of long-axis myocardial velocity is displacement, which may be represented as a color map over the left ventricular myocardium. This study was designed to explore the feasibility and accuracy of measuring long-axis myocardial displacement, derived from tissue Doppler, for the detection of coronary artery disease (CAD) during dobutamine stress echocardiography (DBE). One hundred thirty patients underwent standard DBE, including 30 patients at low risk of CAD, 30 patients with normal coronary angiography (both groups studied to define normal ranges of displacement), and 70 patients who underwent coronary angiography in whom the accuracy of normal ranges was tested. Regional myocardial displacement was obtained by analysis of color tissue Doppler apical images acquired at peak stress. Displacement was compared with WMS, and with the presence of CAD by angiography. The analysis time was 3.2 +/- 1.5 minutes per patient. Segmental displacement was correlated with wall motion (normal 7.4 +/- 3.2 mm, ischemia 5.8 +/- 4.2 mm, viability 4.6 +/- 3.0 mm, scar 4.5 +/- 3.5 mm, p <0.001). Reversal of normal base-apex displacement was an insensitive (19%) but specific (90%) marker of CAD. The sum of displacements within each vascular territory had a sensitivity and specificity of 89% and 79%, respectively, for prediction of significant CAD, compared with 86% and 78%, respectively, for WMS (p = NS). The displacements in the basal segments had a sensitivity and specificity of 83% and 78%, respectively (p = NS). Regional myocardial displacement during DBE is feasible and offers a fast and accurate method for the diagnosis of CAD. (C),2002 by Excerpta Medica, Inc.

Constrains on the structure of Maio Island (Cape Verde) by a three-dimensional gravity model: Imaging partially exhumed magma chambers

We propose a 3-D gravity model for the volcanic structure of the island of Maio (Cape Verde archipelago) with the objective of solving some open questions concerning the geometry and depth of the intrusive Central Igneous Complex. A gravity survey was made covering almost the entire surface of the island. The gravity data was inverted through a non-linear 3-D approach which provided a model constructed in a random growth process. The residual Bouguer gravity field shows a single positive anomaly presenting an elliptic shape with a NWSE trending long axis. This Bouguer gravity anomaly is slightly off-centred with the island but its outline is concordant with the surface exposure of the Central Igneous Complex. The gravimetric modelling shows a high-density volume whose centre of mass is about 4500 m deep. With increasing depth, and despite the restricted gravimetric resolution, the horizontal sections of the model suggest the presence of two distinct bodies, whose relative position accounts for the elongated shape of the high positive Bouguer gravity anomaly. These bodies are interpreted as magma chambers whose coeval volcanic counterparts are no longer preserved. The orientation defined by the two bodies is similar to that of other structures known in the southern group of the Cape Verde islands, thus suggesting a possible structural control constraining the location of the plutonic intrusions.

Defying Standard Criteria for Digital Replantation: A Case Series

INTRODUCTION: There is much controversy regarding the current indications and contraindications for digital replantation. PRESENTATION OF CASE: Three patients with absolute contraindications for digital replantation according to classical criteria are presented (Case 1: multilevel amputation of the hand and fingers; Case 3: avulsion of the thumb; Case 4: index amputation proximal to the insertion of the flexor digitorum superficialis). In addition a patient with a very distal digital amputation (Case 2), whose indication for replantation is controversial is also presented. In all cases, the patients were replanted and showed good functional and aesthetical results. DISCUSSION: Most authors advocate that the classical indications for replantation have been validated by experience, are predicated on the potential for long-term function, and should be followed in most if not all cases. However, some surgeons have been adopting a more liberal attitude with good results. CONCLUSION: The clinical cases presented in this paper suggest that the standard criteria for digital replantation should not be followed rigidly but instead should be regarded as a general guide.

Old cellulose for new multifunctional networks

Dissertação para obtenção do Grau de Doutor em Ciência e Engenharia de Materiais

Physa Marmorata Guilding, 1828 (Pulmonata: Physidae)

A description of Physa marmorata Guilding, 1828, based on material collected at its type-locality, the Caribbean island of Saint Vincent, is presented. The shell is thin, horn-colored, surface very glossy, diaphanous. Spire acute, elevated; protoconch distinct, rounded-conical, reddish-brown; five not shouldered, broadly convex whorls with subobsolete spiral lines and thin growth lines. Aperture elongated, 1.4-2.0 times as long as the remaining shell length, narrow obovate-lunate; upper half acute-angled,lower half oval,narrowly rounded at the base, outer lip sharp, inner lip completely closing the umbilical region; a very distinct callus on the parietal wall; columellar lip with a low ridge gradually merging into the callus. ratios: shell width/shell length = 0.44 - 0.52 (mean 0.47); spire length /shell lenght = 0.33-0.41 (mean 0.39); aperture length/shell lenght = 0.59-0.67 (mean 0.62). Oral lappets laterally mucronate, foot spatulate with deeply pigmented acuminate tail. Mantle reflection with 6-10 short triangular dentations covering nearly half the right surface of the body whorl, and 4-6 covering a part of the ventral wall. Body surface with tiny dots of greenish-yellow pigment besides melanin. Renal tube tightly folded in toa zigzag course. Ovotestis diverticula acinous, laterally pressed against each other around a collecting canal. Ovispermiduct with well-developed seminal vesicle. oviduct highly convoluted, merging into a less convoluted nidamental gland which narrows to a funnel-shaped uterus and a short vagina. Spermathecal body oblong, more or less constricted in the middle and somewhat curved; spermathecal duct uniformly narrow, a little longer than be body. About 20 prostatic diverticula, simple, bifurcate or divided into a few short branches, distalmost ones assembled into a cluster. Penis long, nearly uniformly narrow; penial canal with lateral opening about the junction of its middle and lower thirds. Penial sheath with a bulbous terminal expasion the tip of which isinserted into the caudal end of the prepuce. Prepuce shouldered, much wider than the narrow portion of the penial sheath. Penial sheath/prepuce ratio about 2.08 (1.45-2.75). The main extrinsic muscles of the penial complex are a retractor, with a branch attached to the bulb, and another to the caudal end of the penial sheath; and a protractor, with a branch attached to the shoulder of the prepuce and adjoining area of the penial sheath, and another to the caudal end of the penial sheath. Egg capsule C-shaped, with 10-30 elliptical eggs (snails 10mm long) measuring about 1.10 mm (0.90-1.32) through the long axis and surrounded by an inner and an outer lamellate membranes. Jaw a simple obtusely V-shaped plate. radula will be described separately.

Observations on the morphology of Pomacea lineata (Spix, 1827) (Mollusca, Ampullariidae)

This paper deals with the morpholgy of Pomacea lineata (Spix, 1827) collected at its type locality. The shell is globose, moderately heavy, horn-colored with brown spiral bands; apex subelevated; 4 - 5 rounded whorls increasing in diameter rather rapidly, separated by deep suture. Aperture large and ovoid; outer lip sharp; umbilicus narrow and deep; operculum concentric, corneous. Ratios: shell width/shell length = 0.74 - 0.83 (mean 0.78); spire length/shell length = 0.10 - 0.18 (mean 0.13); aperture length/shell length = 0.70 - 0.77 (mean 0.73). The animal is longisiphonate. Renal organ brownish with marked invagination at its right edge. Ureter elongated with its long axis transverse to the main axis of the kidney. The radula is taenioglossate (2.1.1.1.2) and has on average 35 transverse rows of teeth. The form and arrangement of the radula teeth are nearly the same as in other Ampullariidae. The testis is cream-colored and lies in the first three whorls of the spire. Spermiduct uniformly narrow, running to the base of the spire. Seminal vesicle whitish, slightly pressed dorsoventrally. Prostate cylindric and thick, similar in color to the testis. Penis whiplike, with a closed circular spermiduct. Penis pouch ovoid completely envelping the penis. Penis sheath elongated, broad prosimally, tapering distally. Its inner surface shows a longitudinal channel along its proximal half and two glands, one on the middle and the other apical. Ovary composed of branched whitish tubules situated on the surface of the digestive gland. Oviduct slender running along the columellar axis toward the base of the spire. Seminal receptalble tubiform, thick-walled and rounded proximally. Albumen gland large, pink, enclosing the receptacle and the spiral capsule gland. Vestigial male copulatory apparatus (penis and its sheath) present in all females examined.

Post-mortem cardiac 3-T magnetic resonance imaging: visualization of sudden cardiac death?

OBJECTIVES: This study aimed to investigate post-mortem magnetic resonance imaging (pmMRI) for the assessment of myocardial infarction and hypointensities on post-mortem T2-weighted images as a possible method for visualizing the myocardial origin of arrhythmic sudden cardiac death. BACKGROUND: Sudden cardiac death has challenged clinical and forensic pathologists for decades because verification on post-mortem autopsy is not possible. pmMRI as an autopsy-supporting examination technique has been shown to visualize different stages of myocardial infarction. METHODS: In 136 human forensic corpses, a post-mortem cardiac MR examination was carried out prior to forensic autopsy. Short-axis and horizontal long-axis images were acquired in situ on a 3-T system. RESULTS: In 76 cases, myocardial findings could be documented and correlated to the autopsy findings. Within these 76 study cases, a total of 124 myocardial lesions were detected on pmMRI (chronic: 25; subacute: 16; acute: 30; and peracute: 53). Chronic, subacute, and acute infarction cases correlated excellently to the myocardial findings on autopsy. Peracute infarctions (age range: minutes to approximately 1 h) were not visible on macroscopic autopsy or histological examination. Peracute infarction areas detected on pmMRI could be verified in targeted histological investigations in 62.3% of cases and could be related to a matching coronary finding in 84.9%. A total of 15.1% of peracute lesions on pmMRI lacked a matching coronary finding but presented with severe myocardial hypertrophy or cocaine intoxication facilitating a cardiac death without verifiable coronary stenosis. CONCLUSIONS: 3-T pmMRI visualizes chronic, subacute, and acute myocardial infarction in situ. In peracute infarction as a possible cause of sudden cardiac death, it demonstrates affected myocardial areas not visible on autopsy. pmMRI should be considered as a feasible post-mortem investigation technique for the deceased patient if no consent for a clinical autopsy is obtained.

Navigator-gated and real-time motion corrected free-breathing MR Imaging of myocardial late enhancement.

PURPOSE: A new magnetic resonance imaging approach for detection of myocardial late enhancement during free-breathing was developed. METHODS AND RESULTS: For suppression of respiratory motion artifacts, a prospective navigator technology including real-time motion correction and a local navigator restore was implemented. Subject specific inversion times were defined from images with incrementally increased inversion times acquired during a single dynamic scout navigator-gated and real-time motion corrected free-breathing scan. Subsequently, MR-imaging of myocardial late enhancement was performed with navigator-gated and real-time motion corrected adjacent short axis and long axis (two, three and four chamber) views. This alternative approach was investigated in 7 patients with history of myocardial infarction 12 min after i. v. administration of 0.2 mmol/kg body weight gadolinium-DTPA. CONCLUSION: With the presented navigator-gated and real-time motion corrected sequence for MR-imaging of myocardial late enhancement data can be completely acquired during free-breathing. Time constraints of a breath-hold technique are abolished and optimized patient specific inversion time is ensured.

Cutting of Frozen Wood

The objective of this master's thesis was to develop a system for measuring the cutting forces of frozen wood. In northern parts of the world cuttingof frozen wood is one of the major problem. During winter and early spring the temperature inside the wood cells will fall below Zero degrees that strongly influences on the properties of the wood. These variations of properties will effects on the blade nomenclature while cutting the frozen wood. However the end results will cause uneven cutting forces. Cutting forces, Chip formation, wearing of the blade and the quality of the machined surface are difficult task. In this project we are attempting to find the variation of cutting forces and properties of frozen wood at four different temperatures (-20 , -10, 0 and + 10 degrees). The linear planning machine was used for measuring the cuttingforces. The cutting was done parallel to the long axis of wood due to the nature of pine wood and the structure of the plane. A considerable amount of work andtime was used for collecting and processing the numerical information from the sensors of the measuring system. There were some alterations suggested to the construction of the plane and the sensor system.

Multi-slice three-dimensional myocardial strain tensor quantification using zHARP.

In this article we propose a novel method for calculating cardiac 3-D strain. The method requires the acquisition of myocardial short-axis (SA) slices only and produces the 3-D strain tensor at every point within every pair of slices. Three-dimensional displacement is calculated from SA slices using zHARP which is then used for calculating the local displacement gradient and thus the local strain tensor. There are three main advantages of this method. First, the 3-D strain tensor is calculated for every pixel without interpolation; this is unprecedented in cardiac MR imaging. Second, this method is fast, in part because there is no need to acquire long-axis (LA) slices. Third, the method is accurate because the 3-D displacement components are acquired simultaneously and therefore reduces motion artifacts without the need for registration. This article presents the theory of computing 3-D strain from two slices using zHARP, the imaging protocol, and both phantom and in-vivo validation.

Järjestelmä puun työstövoimien mittaamiseksi

Diplomityössä oli tavoitteena kehittää järjestelmää puun leikkuuvoimien mittaamiseksi. Puun leikkuuvoima, lastun muodostus, terien kuluminen ja työstöjälki ovat tekijöitä, jotka kiinnostavat puun työstön kanssa tekemisissä olevia tahoja. Luonnonmateriaalina puu on erittäin epähomogeenista, mikä vaikeuttaa luotettavien ja tarkkojen mittaustulosten saavuttamista. Mittauksia vaikeuttavia tekijöitä ovat muun muassa puun tiheysvaihtelut, poikkeamat syysuunnassa sekä oksat. Leikkuuvoimien mittaamisessa käytettiin lineaarihöylää. Höylän rakenteesta ja toimintaperiaatteesta sekä puumateriaalin luonteesta johtuen höyläykset tehtiin ainoastaan puun pituussuunnassa. Huomattavan osan työstä muodosti anturoinnilta tulevan mittaustiedon taltiointiin ja muokkaamiseen liittyvät kysymykset. Mittausjärjestelmän testaamisen ja tehtyjen koemittausten perusteella päädyttiin ehdottamaan muutamia muutoksia sekä itse höylään että mittausanturointiin.

Cyanoaggregatum brasiliense gen. et sp. nov., a new chroococcal Cyanobacteria from Southern Brazil

The paper proposed Cyanoaggregatum brasiliense, a new genus and species from the plankton of a subtropical brackish coastal lagoon from Rio Grande do Sul State, South Brazil. It differs from all other members of Chroococcales by its characteristic arrangement of cells in irregular groups distributed in a single, flat or slightly curved layer, on irregular rows, slightly distant from each other, forming a mosaic-like pattern slightly below the surface of the mucilaginous colonial envelope. The cell division in one plane perpendicular to the long axis and the lack of pseudo-filaments indicate its classification in the family Synechococcaceae, sub-family Aphanothecoideae. The general characteristics, the diagnostic criteria and the taxonomic position are discussed, and a comparison between Cyanoaggregatum and its most closely related genera is presented. Physical and chemical data on the studied lagoon and geographical distribution are presented.

Isolation and characterization of a serine proteinase with thrombin-like activity from the venom of the snake Bothrops asper

A serine proteinase with thrombin-like activity was isolated from the venom of the Central American pit viper Bothrops asper. Isolation was performed by a combination of affinity chromatography on aminobenzamidine-Sepharose and ion-exchange chromatography on DEAE-Sepharose. The enzyme accounts for approximately 0.13% of the venom dry weight and has a molecular mass of 32 kDa as determined by SDS-PAGE, and of 27 kDa as determined by MALDI-TOF mass spectrometry. Its partial amino acid sequence shows high identity with snake venom serine proteinases and a complete identity with a cDNA clone previously sequenced from this species. The N-terminal sequence of the enzyme is VIGGDECNINEHRSLVVLFXSSGFL CAGTLVQDEWVLTAANCDSKNFQ. The enzyme induces clotting of plasma (minimum coagulant dose = 4.1 µg) and fibrinogen (minimum coagulant dose = 4.2 µg) in vitro, and promotes defibrin(ogen)ation in vivo (minimum defibrin(ogen)ating dose = 1.0 µg). In addition, when injected intravenously in mice at doses of 5 and 10 µg, it induces a series of behavioral changes, i.e., loss of the righting reflex, opisthotonus, and intermittent rotations over the long axis of the body, which closely resemble the `gyroxin-like' effect induced by other thrombin-like enzymes from snake venoms.