Análise da eficácia de um refrigerador doméstico com condensador modificado: revestimento com meio poroso dissipativo

The development of home refrigerators generally are compact and economic reasons for using simplified configuration. The thermodynamic coefficient of performance ( COP ) is limited mainly in the condenser design for reasons of size and arrangement ( layout ) of the project ( design ) and climatic characteristics of the region where it will operate. It is noteworthy that this latter limitation is very significant when it comes to a country of continental size like Brazil with diverse climatic conditions. The COP of the cycle depends crucially on the ability of heat dissipated in the condenser. So in hot climates like the northeast, north, and west-central dispel ability is highly attenuated compared to the south and southeast regions with tropical or subtropical climates when compared with other regions. The dissipation in compact capacitors for applications in domestic refrigeration has been the focus of several studies, that due to its impact on reducing costs and power consumption, and better use of the space occupied by the components of refrigeration systems. This space should be kept to a minimum to allow an increase in the useful storage volume of refrigerator without changing the external dimensions of the product. Due to its low cost manufacturing, wire on tube condensers continue to be the most advantageous option for domestic refrigeration. Traditionally, these heat exchangers are designed to operate under natural convection. Not always, the benefits of greater compactness of capacitors for forced outweigh the burden of pumping air through the external heat exchanger. In this work we propose an improvement in convective condenser changing it to a transfer mechanism combined in series with conductive pipes and wire to a moist convective porous medium and the porous medium to the environment. The porous media used in the coating was composed of a gypsum plaster impregnated fiber about a mesh of natural cellulosic molded tubular wire mesh about the original structure of the condenser , and then dried and calcined to greater adherence and increased porosity. The proposed configuration was installed in domestic refrigeration system ( trough ) and tested under the same conditions of the original configuration . Was also evaluated in the dry condition and humidified drip water under natural and forced with an electro - fan ( fan coil ) convection. Assays were performed for the same 134- refrigerant charge e under the same thermal cooling load. The performance was evaluated in various configurations, showing an improvement of about 72 % compared with the original configuration proposed in humidification and natural convection.

Advanced functionality for radio analysis in the Offline software framework of the Pierre Auger Observatory.

The advent of the Auger Engineering Radio Array (AERA) necessitates the development of a powerful framework for the analysis of radio measurements of cosmic ray air showers. As AERA performs "radio-hybrid" measurements of air shower radio emission in coincidence with the surface particle detectors and fluorescence telescopes of the Pierre Auger Observatory, the radio analysis functionality had to be incorporated in the existing hybrid analysis solutions for fluorescence and surface detector data. This goal has been achieved in a natural way by extending the existing Auger Offline software framework with radio functionality. In this article, we lay out the design, highlights and features of the radio extension implemented in the Auger Offline framework. Its functionality has achieved a high degree of sophistication and offers advanced features such as vectorial reconstruction of the electric field, advanced signal processing algorithms, a transparent and efficient handling of FFTs, a very detailed simulation of detector effects, and the read-in of multiple data formats including data from various radio simulation codes. The source code of this radio functionality can be made available to interested parties on request. (C) 2011 Elsevier B.V. All rights reserved.

Towards structured, block-based PDF

The Portable Document Format (PDF), defined by Adobe Systems Inc. as the basis of its Acrobat product range, is discussed in some detail. Particular emphasis is given to its flexible object-oriented structure, which has yet to be fully exploited. It is currently used to represent not logical structure but simply a series of pages and associated resources. A definition of an Encapsulated PDF (EPDF) is presented, in which EPDF blocks carry with them their own resource requirements, together with geometrical and logical information. A block formatter called Juggler is described which can lay out EPDF blocks from various sources onto new pages. Future revisions of PDF supporting uniquely-named EPDF blocks tagged with semantic information would assist in composite-pagemakeup and could even lead to fully revisable PDF.

A pilot study on the productivity and behavior of the gestating sow housed in a flex stall

Animal welfare is a controversial topic in modern animal agriculture, partly because it generates interest from both the scientific community and the general public. The housing of gestating sows, particularly individual housing, is one of the most critical concerns in farm animal welfare. We hypothesize that the physical size of the standard gestation stall may limit movement and evoke demands and challenges on the sow to affect the physiological and psychological well-being of the individually housed sow. Thus, improvements in the design of the individual gestation stall system that allow more freedom to move, such as increasing stall width or designing a stall that could accommodate the changing size of the pregnant sow, may improve sow welfare. The objective of this pilot study was to evaluate the effects of a width adjustable stall (FLEX) on productivity and behavior of dry sows. The experiment consisted of 3 replications (block 1, n=4 sows; block 2, n=4 sows; block 3, n=8 sows), and multi-parious sows were allotted to either a FLEX stall or standard gestation stall for 1 gestation period. Sow mid-girth (top of the back to bottom of the udder) was measured 5-6 times throughout gestation to determine the best time points for FLEX stall width expansions. FLEX stall width was adjusted according to mid-girth measurements, and expanded to achieve an additional 2 cm of space between the bottom of the sow’s udder and floor of the stall so that sows could lie in full lateral recumbency without touching the sides of the stall. Productivity data recorded included: sow body weight (BW) and BW gain, number of piglets born and born alive, proportions of piglets stillborn, mummified, lost between birth and weaning, and weaned, and litter and mean piglet birth BW, weaning BW, and average BW gain from birth-to-weaning. Lesions were recorded on d 21 and d 111 of gestation. Sub-pilot behavior data were observed and registered for replicate 1 sows using continuous video-records for the l2 hour lights on period (period 1, 0600-1000; period 2, 1000-1400; period 3, 1400-1800) prior FLEX stall adjustment and 12 hour lights on period post adjustment on d 21, 22, 23, 43, 44, 45, 93, 94, 95. A randomized complete block design with a 2 × 2 factorial arrangement for treatments was used to analyze sow productivity and performance traits. Data were analyzed using the Mixed Models procedure of SAS. A preliminary analysis of data means and numerical trends was used to analyze sow behavior measurements. Sows housed in a FLEX stall had more (P < 0.05) total born and a tendency for more piglets born alive (P = 0.06) than sows housed in a standard stall. Sow body weight also tended to be higher (P = 0.06) for sows housed in a FLEX stall compared to sows housed in a standard stall. There were numerical trends for mean durations of sit, lay, lay (OUT), and eat behaviors to be greater for sows housed in a FLEX stall compared with sows housed in a standard stall. The mean duration of lay (IN) behavior tended to be numerically less for sows housed in a FLEX stall compared with sows housed in a standard stall. There were numerical trends for the mean durations of stand and drink behaviors to be greater for sows housed in a standard stall compared with sows housed in a FLEX stall. The mean frequencies of postural changes and mean durations of oral-nasal-facial and sham-chew behaviors were numerically similar between types of gestation stall. Mean durations and numerical trends indicate that time of day influenced all of the behaviors assessed in this study. The results of this pilot study indicate that the adjustable FLEX stall may affect sow productivity and behavior differently than the standard gestation stall, and thus potentially improve sow well-being. Future research should continue to compare the new FLEX stall design to current housing systems in use and examine physiological traits and immune status in addition to behavioral and productivity traits to assess the effects that this housing system has on the overall welfare of the gestating sow.

Trade Shocks and Local Labor Markets' Linkages: Theory and Evidence

In the past few years, there has been a concern among economists and policy makers that increased openness to international trade affects some regions in a country more than others. Recent research has found that local labor markets more exposed to import competition through their initial employment composition experience worse outcomes in several dimensions such as, employment, wages, and poverty. Although there is evidence that regions within a country exhibit variation in the intensity with which they trade with each other and with other countries, trade linkages have been ignored in empirical analyses of the regional effects of trade, which focus on differences in employment composition. In this dissertation, I investigate how local labor markets' trade linkages shape the response of wages to international trade shocks. In the second chapter, I lay out a standard multi-sector general equilibrium model of trade, where domestic regions trade with each other and with the rest of the world. Using this benchmark, I decompose a region's wage change resulting from a national import cost shock into a direct effect on prices, holding other endogenous variables constant, and a series of general equilibrium effects. I argue the direct effect provides a natural measure of exposure to import competition within the model since it summarizes the effect of the shock on a region's wage as a function of initial conditions given by its trade linkages. I call my proposed measure linkage exposure while I refer to the measures used in previous studies as employment exposure. My theoretical analysis also shows that the assumptions previous studies make on trade linkages are not consistent with the standard trade model. In the third chapter, I calibrate the model to the Brazilian economy in 1991--at the beginning of a period of trade liberalization--to perform a series of experiments. In each of them, I reduce the Brazilian import cost by 1 percent in a single sector and I calculate how much of the cross-regional variation in counterfactual wage changes is explained by exposure measures. Over this set of experiments, employment exposure explains, for the median sector, 2 percent of the variation in counterfactual wage changes while linkage exposure explains 44 percent. In addition, I propose an estimation strategy that incorporates trade linkages in the analysis of the effects of trade on observed wages. In the model, changes in wages are completely determined by changes in market access, an endogenous variable that summarizes the real demand faced by a region. I show that a linkage measure of exposure is a valid instrument for changes in market access within Brazil. By using observed wage changes in Brazil between 1991-2000, my estimates imply that a region at the 25th percentile of the change in domestic market access induced by trade liberalization, experiences a 0.6 log points larger wage decline (or smaller wage increase) than a region at the 75th percentile. The estimates from a regression of wages changes on exposure imply that a region at the 25th percentile of exposure experiences a 3 log points larger wage decline (or smaller wage increase) than a region at the 75th percentile. I conclude that estimates based on exposure overstate the negative impact of trade liberalization on wages in Brazil. In the fourth chapter, I extend the standard model to allow for two types of workers according to their education levels: skilled and unskilled. I show that there is substantial variation across Brazilian regions in the skill premium. I use the exogenous variation provided by tariff changes to estimate the impact of market access on the skill premium. I find that decreased domestic market access resulting from trade liberalization resulted in a higher skill premium. I propose a mechanism to explain this result: that the manufacturing sector is relatively more intensive in unskilled labor and I show empirical evidence that supports this hypothesis.

Experientialist Epistemology and Classification Theory: Embodied and Dimensional Classification

What theoretical framework can help in building, maintaining and evaluating networked knowledge organization resources? Specifically, what theoretical framework makes sense of the semantic prowess of ontologies and peer-to-peer sys- tems, and by extension aids in their building, maintenance, and evaluation? I posit that a theoretical work that weds both for- mal and associative (structural and interpretive) aspects of knowledge organization systems provides that framework. Here I lay out the terms and the intellectual constructs that serve as the foundation for investigative work into experientialist classifi- cation theory, a theoretical framework of embodied, infrastructural, and reified knowledge organization. I build on the inter- pretive work of scholars in information studies, cognitive semantics, sociology, and science studies. With the terms and the framework in place, I then outline classification theory s critiques of classificatory structures. In order to address these cri- tiques with an experientialist approach an experientialist semantics is offered as a design commitment for an example: metadata in peer-to-peer network knowledge organization structures.

Dynamic Modeling and Seasonal Performance Evaluation of Air-to-Water Heat Pump Systems

In this Thesis a series of numerical models for the evaluation of the seasonal performance of reversible air-to-water heat pump systems coupled to residential and non-residential buildings are presented. The exploitation of the energy saving potential linked to the adoption of heat pumps is a hard task for designers due to the influence on their energy performance of several factors, like the external climate variability, the heat pump modulation capacity, the system control strategy and the hydronic loop configuration. The aim of this work is to study in detail all these aspects. In the first part of this Thesis a series of models which use a temperature class approach for the prediction of the seasonal performance of reversible air source heat pumps are shown. An innovative methodology for the calculation of the seasonal performance of an air-to-water heat pump has been proposed as an extension of the procedure reported by the European standard EN 14825. This methodology can be applied not only to air-to-water single-stage heat pumps (On-off HPs) but also to multi-stage (MSHPs) and inverter-driven units (IDHPs). In the second part, dynamic simulation has been used with the aim to optimize the control systems of the heat pump and of the HVAC plant. A series of dynamic models, developed by means of TRNSYS, are presented to study the behavior of On-off HPs, MSHPs and IDHPs. The main goal of these dynamic simulations is to show the influence of the heat pump control strategies and of the lay-out of the hydronic loop used to couple the heat pump to the emitters on the seasonal performance of the system. A particular focus is given to the modeling of the energy losses linked to on-off cycling.

LAY USE OF AMAZONIAN PLANTS FOR THE TREATMENT OF TUBERCULOSIS

The Brazilian State of Amazonas has a high incidence of Tuberculosis, 91.4 in 10,000 habitants (SESAU, 1994) and resistant strains of Mycobacterium tuberculosis are frequently being found in the region (SALEM et.al, 1990). These problems have been associated with side effects caused by the antibiotics used to treat Tuberculosis, which have in rum been associated with treatment non-compliance (PATTISAPU, 1984). To resolve this problem a cost effective alternative treatment for Tuberculosis with few or no side effects, needs to be found. Amazonas has an abundance of plants, many of which are used by the lay population for medicinal purposes. A survey was carried out in five towns of the region, interviewing patients receiving treatment for Tuberculosis, to find out whether and which plants have been used to treat Tuberculosis. Results showed that the majority of patients in the sample had used medicinal plants before or after diagnosis of Tuberculoses. Thirteen different plants were recorded for this purpose. Chenopodium ambrosioides L, popularly known as Mastruz, was the most commonly used, followed by Caesalpinia ferrea Mart. Jucá and Spilanthes acmella DC. Jambu. This study concentrates on Mastruz as it was used more frequently than the other medicinal plants. No significant effects on baciloscopy test results were found when Mastruz was used before diagnosis. ln-vitro laboratory tests have also not shown any tuberculocidal effects for Mastruz. Further tests are being carried out on the other medicinal plants.

Effect of organic mineral supplementation on the egg quality of semi-heavy layers in their second cycle of lay

This study was carried out to evaluate the effects of dietary trace mineral levels and sources on egg quality parameters of second-cycle semi-heavy layers. A number of 360 72-week-old layers were submitted to forced molting. Upon return of lay (83 weeks of age), birds were distributed according to a completely randomized experimental design of six treatments with six replicates of 10 birds each. The control treatment consisted of 0.10% dietary supplementation of trace minerals from inorganic sources, which was proportionally replaced by five levels (110, 100, 90, 80, 70%) of an organic trace mineral supplement containing 30, 30, 40, 6, 0.61, and 0.3 g/kg product of Zn, Fe, Mn, Cu, I, and Se, respectively. All diets contained equal protein, energy, and amino acid levels. Every 28 days of the experimental period (112 days) four eggs per replicate were collected for egg quality evaluation. The following parameters were evaluated: specific gravity, yolk, albumen and eggshell percentages, yolk index, Haugh units, and eggshell thickness and breaking strength. One sample per replicate, consisting of the pool of the yolks of three eggs collected at the end of each experimental period, was used to assess protein and mineral (Ca, P, Cu, Fe, Mn, and Zn) contents. The results were submitted to ANOVA, and means to the test of Tukey at 5% significance level. The evaluated trace mineral levels and sources did not influence any of the studied egg quality parameters. It was concluded that reducing organic trace mineral supplementation in up to 70% relative to 100% inorganic trace mineral supplementation does not affect egg parameters and therefore, can be applied to the diet of semi-heavy layers in their second cycle of lay.

Impact of educational posters on the lay knowledge of school teachers regarding emergency management of dental injuries

The purpose of this study was to investigate the knowledge of school teachers about the emergency management of dental trauma, after an educational poster campaign. A total of 1000 questionnaires were sent to 100 schools in the area where the poster had been distributed. This was compared to another 100 schools (1000 questionnaires) in an area, Where the poster had not been distributed. The questionnaire surveyed demographic data, basic knowledge of emergency management of tooth fracture, luxation and avulsion injuries. A total of 511 questionnaires were returned (25.5%) and analyzed. Results showed differences between the two assessed areas. Teachers, who worked in the area with poster distribution, had better knowledge in handling tooth injuries. For the management of tooth fractures the portion of teachers, who knew the correct handling procedure, was 78.9% (area with poster campaign) vs 72.1% (area with no poster campaign), for the management of tooth luxation it was 87% vs 84% and for the management of tooth avulsion it was 71% vs 54%. In the area with the poster campaign 49% (n = 90 out of 185) of the teachers stated to have gained some knowledge about this topic beforehand. Out of these, 75 teachers (75/90 = 83%), had gained their information from the educational poster. Out of the 75 teachers, who had seen a poster on this topic, 68 (68/75 = 91%) would have managed such an emergency correctly. The present study shows the positive effect of educational poster campaigns. It therefore should encourage professionals in this field to embark on similar projects.

Color in everyday : a manual for lay students, artisans and artists on the principles of color combination and color arrangement, and their applications in dress, home, business, the theatre and community play /

"The book has grown out of a course of lectures on 'Color and its applications, based on a study of Museum originals' given at the Metropolitan Museum of Art under the auspices of New York University."--Introd.

Emergent Antiferromagnetism Out Of The Hidden-order" State In Uru2si2: High Magnetic Field Nuclear Magnetic Resonance To 40 T."

Very high field (29)Si-NMR measurements using a fully (29)Si-enriched URu(2)Si(2) single crystal were carried out in order to microscopically investigate the hidden order (HO) state and adjacent magnetic phases in the high field limit. At the lowest measured temperature of 0.4 K, a clear anomaly reflecting a Fermi surface instability near 22 T inside the HO state is detected by the (29)Si shift, (29)K(c). Moreover, a strong enhancement of (29)K(c) develops near a critical field H(c) ≃ 35.6 T, and the ^{29}Si-NMR signal disappears suddenly at H(c), indicating the total suppression of the HO state. Nevertheless, a weak and shifted (29)Si-NMR signal reappears for fields higher than H(c) at 4.2 K, providing evidence for a magnetic structure within the magnetic phase caused by the Ising-type anisotropy of the uranium ordered moments.

[lay Agency And Healthcare: Producing Healthcare Maps].

This study aimed to characterize which regulatory logics (other than government regulation) result in healthcare output, using a two-stage qualitative study in two municipalities in the ABCD Paulista region in São Paulo State, Brazil. The first stage included interviews with strategic actors (managers and policymakers) and key health professionals. The second phase collected life histories from 18 individuals with high health-services utilization rates. An analysis of the researchers' involvement in the field allowed a better understanding of the narratives. Four regulatory systems were characterized (governmental, professional, clientelistic, and lay), indicating that regulation is a field in constant dispute, a social production. Users' action produces healthcare maps that reveal the existence of other possible health system arrangements, calling on us to test shared management of healthcare between health teams and users as a promising path to the urgent need to reinvent health.

Relationship Between Aerobic And Anaerobic Parameters From 3-minute All-out Tethered Swimming And 400-m Maximal Front Crawl Effort.

The main aim of this investigation was to verify the relationship of the variables measured during a 3-minute all-out test with aerobic (i.e., peak oxygen uptake [(Equation is included in full-text article.)] and intensity corresponding to the lactate minimum [LMI]) and anaerobic parameters (i.e., anaerobic work) measured during a 400-m maximal performance. To measure force continually and to avoid the possible influences caused by turns, the 3-minute all-out effort was performed in tethered swimming. Thirty swimmers performed the following tests: (a) a 3-minute all-out tethered swimming test to determine the final force (equivalent to critical force: CF3-MIN) and the work performed above CF3-MIN (W'3-MIN), (b) a LMI protocol to determine the LMI during front crawl swimming, and (c) a 400-m maximal test to determine the (Equation is included in full-text article.)and total anaerobic contribution (WANA). Correlations between the variables were tested using the Pearson's correlation test (p ≤ 0.05). CF3-MIN (73.9 ± 13.2 N) presented a high correlation with the LMI (1.33 ± 0.08 m·s; p = 0.01) and (Equation is included in full-text article.)(4.5 ± 1.2 L·min; p = 0.01). However, the W'3-MIN (1,943.2 ± 719.2 N·s) was only moderately correlated with LMI (p = 0.02) and (Equation is included in full-text article.)(p = 0.01). In summary, CF3-MIN determined during the 3-minute all-out effort is associated with oxidative metabolism and can be used to estimate the aerobic capacity of swimmers. In contrast, the anaerobic component of this model (W'3-MIN) is not correlated with WANA.

Effect of cement type and water storage time on the push-out bond strength of a glass fiber post

This study investigated the effects of the cement type and the water storage time on the push-out bond strength of a glass fiber post. Glass fiber posts (Fibrekor, Jeneric Pentron) were luted to post spaces using a self-cured resin cement (C&B Cement [CB]), a glass ionomer cement (Ketac Cem [KC]) or a resin-modified glass ionomer cement (GC FujiCEM [FC]) according to the manufacturers’ instructions. For each luting agent, the specimens were exposed to one of the following water storage times (n=5): 1 day (T1), 7 days (T7), 90 days (T90) and 180 days (T180). Push-out tests were performed after the storage times. Control specimens were not exposed to water storage, but subjected to the push-out test 10 min after post cementation. Data (in MPa) were analyzed by Kruskal-Wallis and Dunn`s test (α=0.05). Cement type and water storage time had a significant effect (p<0.05) on the push-out bond strength. CB showed significantly higher values of retention (p<0.05) than KC and FC, irrespective of the water storage time. Water storage increased significantly the push-out bond strength in T7 and T90, regardless of the cement type (p<0.05). The results showed that fiber posts luted to post spaces with the self-cured resin cement exhibited the best bonding performance throughout the 180-day water storage period. All cements exhibited a tendency to increase the bond strength after 7 and 90 days of water storage, decreasing thereafter.